Dating of Dissolved Iodine in Pore Waters from the Gas Hydrate Occurrence Offshore Shimokita Peninsula,Japan: 129I Results from the D/V Chikyu Shakedown Cruise

Iodine concentration and radioisotopic composition (¹²⁹I/I) were measured in the pore waters from the gas hydrate occurrence in the forearc basin offshore Shimokita Peninsula, north-eastern Japan, to determine the source formation of I and accompanying hydrocarbons. Iodine concentrations correlate well with the alkalinity and SO₄ patterns, reflecting degradation stages of I-rich buried organic matter, rapidly increasing in the sulfate reduction interval, and becoming constant below 250 meters below the seafloor with an upwelling flux of 1.5 × 10⁻¹¹ µmol cm⁻² year⁻¹. The ¹²⁹I/I ratios of 300 × 10⁻¹⁵–400 × 10⁻¹⁵ in deep pore waters suggest ages for iodine and hydrocarbon sources as old as 40 Ma. These ages correlate well with the coaly source formations of the Eocene age thought to be responsible for the conventional natural gas deposits underlying the gas hydrate stability zone. Similar profiles are observed in ¹²⁹I/I ratios of pore waters in the gas hydrate stability zone from the forearc basin in the eastern Nankai Trough, offshore central Japan, where pore waters are enriched in I and reach ages as old as ∼50 Ma through the sediment column. At the outer ridge site along the trough, on the other hand, relatively younger I are more frequently delivered probably through thrusts/faults associated with subduction. The nature of source formations of I and hydrocarbons in the offshore Shimokita Peninsula has a more terrestrial contribution compared with those in the Nankai Trough, but these formations are also considerably older than the host sediments, suggesting long-term transport of I and hydrocarbons for the accumulation of gas hydrates in both locations.     

Petrology and Geochemistry of Eclogite Xenoliths from the Colorado Plateau: Implications for the Evolution of Subducted Oceanic Crust

Eclogite xenoliths from the Colorado Plateau, interpreted asfragments of the subducted Farallon plate, are used to constrainthe trace element and Sr–Nd–Pb isotopic compositionsof oceanic crust subducted into the upper mantle. The xenolithsconsist of almandine-rich garnet, Na-clinopyroxene, lawsoniteand zoisite with minor amounts of phengite, rutile, pyrite andzircon. They have essentially basaltic bulk-rock major elementcompositions; their Na₂O contents are significantly elevated,but K₂O contents are similar to those of unaltered mid-oceanridge basalt (MORB). These alkali element characteristics areexplained by spilitization or albitization processes on thesea floor and during subduction-zone metasomatism in the fore-arcregion. The whole-rock trace element abundances of the xenolithsare variable relative to sea-floor-altered MORB, except forthe restricted Zr/Hf ratios (36·9–37·6).Whole-rock mass balances for two Colorado Plateau eclogite xenolithsare examined for 22 trace elements, Rb, Cs, Sr, Ba, Y, rareearth elements, Pb, Th and U. Mass balance considerations andmineralogical observations indicate that the whole-rock chemistriesof the xenoliths were modified by near-surface processes afteremplacement and limited interaction with their host rock, aserpentinized ultramafic microbreccia. To avoid these secondaryeffects, the Sr, Nd and Pb isotopic compositions of mineralsseparated from the xenoliths were measured, yielding 0·70453–0·70590for ⁸⁷Sr/⁸⁶Sr, –3·1 to 0·5 for Nd and 18·928–19·063for ²⁰⁶Pb/²⁰⁴Pb. These isotopic compositions are distinctlymore radiogenic for Sr and Pb and less radiogenic for Nd thanthose of altered MORB. Our results suggest that the MORB-likeprotolith of the xenoliths was metasomatized by a fluid equilibratedwith sediment in the fore-arc region of a subduction zone andthat this metasomatic fluid produced continental crust-likeisotopic compositions of the xenoliths. KEY WORDS: Colorado Plateau; eclogite xenolith; geochemistry; subducted oceanic crust     

Resolution dependence of tropical cyclone formation in CMIP3 and finer resolution models

Detection of tropical lows is performed in a suite of climate model simulations using objectively-determined detection thresholds that are resolution-dependent. It is found that there is some relationship between model resolution and tropical cyclone formation rate even after the resolution-dependent tropical cyclone detection threshold is applied. The relationship is investigated between model-simulated tropical cyclone formation and a climate-based tropical cyclone Genesis Potential Index (GPI). It is found that coarser-resolution models simulate the GPI better than they simulate formation of tropical cyclones directly. As a result, there appears to be little relationship from model to model between model GPI and the directly-simulated cyclone formation rate. Statistical analysis of the results shows that the main advantage of increasing model resolution is to give a considerably better pattern of cyclone formation. Finer resolution models also simulate a slightly better pattern of GPI, and for these models there is some relationship between the pattern of GPI simulated by each model and that model’s pattern of simulated tropical cyclone formation.     

Microbialite development patterns in the last deglacial reefs from Tahiti (French Polynesia; IODP Expedition #310): Implications on reef framework architecture

The widespread occurrence of microbialites in the last deglacial reef frameworks (16–6 Ka BP) implies that the accurate study of their development patterns is of prime importance to unravel the evolution of reef architecture through time and to reconstruct the reef response to sea-level variations and environmental changes.The present study is based on the sedimentological and chronological analysis (¹⁴C AMS dating) of drill cores obtained during the IODP Expedition #310 “Tahiti Sea Level” on the successive terraces which typify the modern reef slopes from Tahiti. It provides a comprehensive data base to investigate the microbialite growth patterns (i.e. growth rates and habitats), to analyze their roles in reef frameworks and to reconstruct the evolution of the reef framework architecture during sea-level rise.The last deglacial reefs from Tahiti are composed of two distinctive biological communities: (1) the coralgal communities including seven assemblages characterized by various growth forms (branching, robust branching, massive, tabular and encrusting) that form the initial frameworks and (2) the microbial communities developed in the primary cavities of those frameworks, a few meters (1.5 to 6 m) below the living coral reef surface, where they heavily encrusted the coralgal assemblages to form microbialite crusts. The dating results demonstrate the occurrence of two distinctive generations of microbialites: the “reefal microbialites” which developed a few hundred years after coralgal communities in shallow-water environments, whereas the “slope microbialites” grew a few thousands of years later in significantly deeper water conditions after the demise of coralgal communities.The development of microbialites was controlled by the volume and the shape of the primary cavities of the initial reef frameworks determined by the morphology and the packing of coral colonies. The most widespread microbialite development occurred in frameworks dominated by branching, thin encrusting, tabular and robust branching coral colonies which built loose and open frameworks typified by a high porosity (> 50%). In contrast, their growth was minimal in compact coral frameworks formed by massive and thick encrusting corals where primary cavities yielded a low porosity (~ 30%) and could not host a significant microbialite expansion.     

Application of the Pi theorem to the wear rate of gouge formation in frictional sliding of rocks

A simple law of wear rate is examined for the process of gouge generation during the frictional sliding of simulated faults in rocks, by use of the Pi theorem method (dimensional analysis) and existing experimental data. The relationship between wear rate (t/d) and the applied stress can be expressed by the power-law relations $$\frac{t}{d} = C_\sigma \sigma ^{m\sigma } ,\frac{t}{d} = C_\tau \tau ^{m\tau }$$ wheret is the thickness of the gouge generated on the frictional surfaces,d is the fault displacement, σ and τ are normal stress and shear stress, respectively, andC _σ,C _τ,m _σ andm _τ are constants. These results indicate that the exponent coefficientsm _σ andm _τ and the coefficientsC _σ andC _τ depend on the material hardness of the frictional surfaces. By using the wear rates of natural faults, these power-law relationships may prove to be an acceptable palaeopiezometer of natural faults and the lithosphere.     

Fluctuations of snow accumulation in the Antarctic and sea level pressure in the Southern Hemisphere in the last 100 years

This paper summarizes the long-term fluctuations of snow accumulation in the Antarctic and analyzes its correlation with the sea level pressure (SLP) in the middle latitude (40°–50° S) of the Southern Hemisphere. Stratigraphic data which were compiled from studies on ice cores and snow-pits at eight stations in the Antarctic were used in the present study. It was found that the data concerning fluctuations in snow accumulation for East Antarctica showed correlations, whereas no such correlation was observed for the data from West Antarctica.This study shows possible relationships between snow accumulation in the Antarctic and SLP in the middle latitudes. The fluctuations of accumulation at South Pole, Dome C, Wilkes and South Ice Point show correlations with SLP over a large area in the 40°–50° S latitudinal zone. For the long-term fluctuations of SLP in the 40°–50 ° S latitudinal zone, a zonal fluctuation with wave number zero structure and a longitudinal variation of SLP anomalies due to their out-of-phase-fluctuation between the Pacific and the Indian Oceans were observed. The temporal scales for these fluctuations were found to be in the order of 20–30 years and 40–60 years, respectively. The influences of these two modes on the behaviour of snow accumulation in the Antarctic is also discussed.Now at Kitami Institute of Technology, Kitami, Hokkaido, Japan.     

Radiometric ages of Alpine metamorphic rocks in the western and central Alps

Abstract The chronological characteristics of Alpine metamorphic rocks are described and Alpine metamorphic events are reinterpreted on the basis of chronological data for the western and central Alps from 1960 to 1992. Metamorphic rocks of the Lepontine, Gran San Bernardo, Piemonte, Internal Crystalline Massifs and Sesia-Lanzo mostly date Alpine metamorphic events, but some (along with granitoids and gneisses from the Helvetic and Southern Alps) result from the Variscan, Caledonian or older events and thus predate the Alpine events. Radiometric age data from the Lepontine area show systematic age relations: U-Pb monazite (23-29 Ma), Rb-Sr muscovite (15–40 Ma) and biotite (15–30 Ma), K-Ar biotite (10-30 Ma), muscovite (15–25 Ma) and hornblende (25-35 Ma), and FT zircon (10-20 Ma) and apatite (5-15 Ma), which can be explained by the different closure temperatures of the isotopic systems. A 121 Ma U-Pb zircon age for a coesite-bearing whiteschist (metaquartzite) from the Dora-Maira represents the peak of ultra-high pressure metamorphism. Coesite-free eclogites and blueschists related to ultra-high pressure rocks in the Penninic crystalline massifs yield an ⁴⁰Ar-³⁹Ar plateau age of about 100 Ma for phengites, interpreted as the cooling age. From about 50 Ma, eclogites and glaucophane schists have also been reported from the Piemonte ophiolites and calcschists, suggesting the existence of a second high P/T metamorphic event. Alpine rocks therefore record three major metamorphic events: (i) ultra-high and related high P/T metamorphism in the early Cretaceous, which is well preserved in continental material such as the Sesia-Lanzo and the Penninic Internal Crystalline Massifs; (ii) a second high P/T metamorphic event in the Eocene, which is recognized in the ophiolites and calcschists of the Mesozoic Tethys; and (iii) medium P/T metamorphism, in which both types of high P/T metamorphic rocks were variably reset by Oligocene thermal events. Due to the mixture of minerals formed in the three metamorphic events, there is a possibility that almost all geochronological data reported from the Alpine metamorphic belt show mixed ages. Early Cretaceous subduction of a Tethyan mid-ocean ridge and Eocene continental collision triggered off the exhumation of the high pressure rocks.     

White mica K-Ar ages of blueschist-facies rocks from the Piemonte 'calc-schists' of the western Italian Alps

Abstract Fifty calc-schists have been systematically collected from the Piemonte zone of the western Italian Alps and examined in terms of petrology, X-ray powder diffractometer (XRD) analysis of carbonaceous materials, and K-Ar ages of white mica separates. The petrological study and XRD analysis of carbonaceous materials have shown that calc-schists have suffered blueschist-facies metamorphism in the subduction zone of the convergent margin between the Apulian (African) continental and Tethyan oceanic plates. The metamorphic sequence is divided into three mineral zones based on increasing metamorphic temperature: chlorite (lower than 300°C), chloritoid, and rutile (higher than 450°C). The chlorite zone has dispersed ages of white mica separates, ranging from 115 to 44 Ma, whereas the rutile zone has a comparatively uniform age distribution from 60 to 40 Ma. The chloritoid zone has an intermediate age variation. The large variation in the chlorite zone is attributed to mixing of variable amounts of detrital mica derived from older high temperature metamorphic rocks in the separates, which have not been completely reset during Alpine metamorphism. The uniform age (average ca 50 Ma) in the rutile zone is the cooling age of blueschist-facies calc-schists, which have been episodically exhumed at the collision event of the European and Apulian continents in the Paleocene-Eocene.     

FMC cameras,high resolution films and very large scale mapping

Abstract

Very large scale mapping (1/250) was experimented on the basis of FMC camera, high resolution film and total station surveying.

The future attractive combination of precision photogrammetry and personal computer assisted terrestrial surveying was investigated from the point of view of accuracy, time effectiveness and total procedures control.