1856年重庆小南海地震地质灾害成因探讨

基于课题调查研究,解析历史地震记载和小南海地震遗址的现存形迹,梳理前人的认识,推算重力崩塌的势能及其相当的地震震级,探讨几种可能的地震地质灾害成因,同时也提出其他可能的诱发因素,认为小南海地震地质灾害可能是多次构造地震叠加的结果,也可能是纯粹的山体自然坍塌形成的塌陷型地震,而彻底揭开小南海地震地质灾害谜团还需人类科研实践的进一步发展,也需要更广泛学科的共同探讨。     

Characteristics of the Seismic Waves from a New Active Source Based on Methane Gaseous Detonation

Active seismic sources are critical for obtaining high resolution images of the subsurface. For active imaging in urban areas, environment friendly and green seismic sources are required. In present work, we introduce a new type of green active source based on the gaseous detonation of methane and oxygen. When fired in a closed container, the chemical reaction, i.e. gaseous detonation, will produce high pressure air over 150MPa. Seismic waves are produced when high pressure air is quickly released to impact the surroundings. The first field experiment of this active source was carried out in December, 2017 in Jingdezhen, Jiangxi Province, where a series of active sources were excited to explore their potential in mine exploration. In current work, we analyzed the seismic waves recorded by near-field accelerators and a dense short-period seismic array and compared them with those from a mobile airgun source, another kind of active source by releasing high pressure air into water. The results demonstrate that it can be used for high resolution near surface imaging. Firstly, the gaseous detonation productions are harmless CO₂ and water, making it a green explosive source. Secondly, the dominant seismic frequencies are 10-80Hz and a single shot can be recorded up to 15km, making it suitable for local structure investigations. Thirdly, it can be excited in vertical wells, similar to traditional powder explosive sources. It can also act as an additional on-land active source to airgun sources, which requires a suitable water body as intermediate media to generate repeating signals. Moreover, the short duration and high frequency signature of the source signals make it safe with no damage to nearby buildings. These make it convenient to excite in urban areas. As a new explosive source, the excitation equipment and conditions, such as gas ratio, sink depth and air-releasing directions, need further investigation to improve seismic wave generation efficiency.     

痕量氢观测环境及供电系统建设

应用ATG-6118H痕量氢在线自动分析仪在水井类观测点观测过程中发现,外界观测环境的变化对于痕量氢浓度的观测存在一定干扰。文章依据宁河痕量氢观测井的观测环境及供电系统的改造过程,对2017年11月11日井房改造完成前后的痕量氢浓度数据进行分析论述,为该仪器的后续观测提供一些借鉴经验。     

青藏高原东南缘Moho面速度密度跃变研究

青藏高原东南缘地下深部结构的研究对了解青藏高原的变形机制和动力学过程具有重要意义.本文利用四川、云南固定台站记录到的远震波形资料,首先采用接收函数H-k叠加方法获得青藏高原东南缘台站下方的地壳厚度和波速比.进而利用接收函数一次转换波和多次波幅度信息确定了青藏高原东南缘Moho面上的S波速度和密度跃变.研究结果表明:研究区由南到北地壳厚度逐渐增加,从永德、沧源、孟连地区的33 km左右增至巴塘地区的69.7 km左右,厚度变化了近乎37 km.四川盆地和松潘甘孜块体南部的姑咱地区具有高泊松比、速度密度跃变较小特征,表明这两个地区含有较多铁镁物质.腾冲地区、龙门山西侧的汶川地区、四川盆地西南缘的沐川地区以及则木河断裂的石门坎至东川地区同属于高泊松比、速度密度跃变较大,显示这些地区壳内存在部分熔融.     

青藏高原及邻区未来地震活动性趋势数值分析

区域中长期地震危险性数值分析研究,需要对其初始构造应力场有所了解,但目前以及未来一段时期内仍无法直接观测到深部孕震层区域的应力场状况.本文首先基于岩石库仑-摩尔破裂准则,利用青藏高原及邻区百年历史范围内的强震信息,来反演估算该区域的初始应力场.然后,考虑区域构造应力加载及强震造成的应力扰动共同作用,重现了历史强震的发展过程.然而对于初始应力场的反演估算,本文仅能给出区域其上下限的极限值,并不能唯一确定.因此,采用Monte Carlo随机法,进行大量独立的随机试验计算,生成数千种有差异的区域初始应力场模型,且保证每种模型都能令历史强震有序发生,但未来应力场演化过程不尽相同.最后,将数千种模型在未来时间段内的危险性预测结果集成为数理统计结果,据此给出了区域未来的地震危险性概率分布图.初步结果显示未来强震危险性概率较高地区集中在巴颜喀拉块体边界及鲜水河断裂带地区.     

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.     

松散岩土体在不同浸泡环境中阴离子浸出特征试验研究

三峡库区大型的赵树岭滑坡区滑坡灾害极为发育。三峡工程蓄水后,水位上升导致原先许多非饱水的松散岩土体处于饱水状态,严重破坏了其稳定性。文章针对该滑坡区内广泛分布的松散岩土的基本类型和特点,设计了4种不同的浸泡环境,进行水-松散岩土相互作用的室内控制试验,通过监测阴离子浸出特征来揭示其化学变化规律。试验结果表明:在不同的pH值、不同的搅拌速度、不同的流速、以及同时改变pH值和搅拌速度的试验环境中,水岩化学作用所浸出的阴离子特征各异。研究结果可以为松散岩土-水化学作用机理研究提供资料,也对赵树岭滑坡体的工程治理具有重要指导意义。     

贝类净化技术研究现状与展望

随着养殖水域环境问题日益凸显,贝类食品安全问题越来越受到重视,贝类在进入流通环节前进行净化将成为不可缺少的处理环节。本文从贝类净化工艺类型、净化用水处理技术,以及贝类净化对风味的影响等方面对当前国内外研究进展进行了总结梳理,并提出下一步贝类净化应重点解决的问题,为深入开展贝类净化相关研究提供参考。     

沿太湖生态旅游带建设的初步研究——以苏州市吴中区为例

基于对苏州市吴中区生态旅游资源优势条件的分析,提出沿太湖建设生态旅游带的构想,从空间格局、旅游资源整合及市场开拓市场定位生态旅游的发展方向,对主要旅游地区提出自然景观与吴文化紧密相融的生态建设方向,优化升级旅游产业、产品结构及生态服务体系建设是引导常规旅游向生态旅游转型的重要措施,阐述了为保护太湖水系水质,必须加强旅游环境的保护与管理。     

内陆河流生态环境需水量定量研究

在有限的水资源中,必须维持合理的生态环境需水量,以满足国民经济持续发展和生态平衡维护的需要,以内陆河流为对象,以生态学理论和水环境容量理论为基础,从维持河流系统水生生物生存、维持水体一定量稀释自净能力以及防止河流水面净蒸发损失的角度出发,分析计算了河流系统的生态环境需水量,以期为水资源合理配置提供科学依据。