Influence of random heterogeneity of shear wave velocity on sliding mass response and seismic deformations of earth slopes

Soil shear wave velocity has been recognized as a governing parameter in the assessment of the seismic response of slopes. The spatial variability of soil shear wave velocity can influence the seismic response of sliding mass and seismic displacements. However, most analyses of sliding mass response have been carried out by deterministic models. This paper stochastically investigates the effect of random heterogeneity of shear wave velocity of soil on the dynamic response of sliding mass using the correlation matrix decomposition method and Monte Carlo simulation(MCS). The software FLAC 7.0 along with a Matlab code has been utilized for this purpose. The influence of statistical parameters on the seismic response of sliding mass and seismic displacements in earth slopes with different inclinations and stiffnesses subject to various earthquake shakings was investigated. The results indicated that, in general, the random heterogeneity of soil shear modulus can have a notable impact on the sliding mass response and that neglecting this phenomenon could lead to underestimation of sliding deformations.     

Mineral-Potential Mapping for MVT Deposits with Limited Data Sets Using Landsat Data and Geological Evidence in the Borden Basin, Northern Baffin Island, Nunavut, Canada

Posterior probabilities of occurrence for Zn-Pb Mississippi Valley Type (MVT) mineralization were calculated based on evidence maps derived from regional geology, Landsat-TM, RADARSAT-1, a digital elevation model and aeromagnetic data sets in the Borden Basin of northern Baffin Island, Canada. The vector representation of geological contacts and fault traces were refined according to their characteristics identified in Landsat-TM, RADARSAT-1, DEM, slope, aspect, and shaded relief data layers. Within the study area, there is an association between the occurrence of MVT mineralization and proximity to the contact of platformal carbonates and shale units of the adjacent geological formation. A spatial association also tends to exist between mineralization and proximity to E-W and NW-SE trending faults. The relationships of known MVT occurrences with the geological features were investigated by spatial statistical techniques to generate evidence maps. Supervised classification and filtering were applied to Landsat-TM data to divide the Society Cliffs Formation into major stratigraphic subunits. Because iron oxides have been observed at some of the MVT occurrences within the Borden Basin, Landsat-TM data band ratio (3/1) was calculated to highlight the potential presence of iron-oxides as another evidence map. Processed Landsat-TM data and other derived geological evidence maps provided useful indicators for identifying areas of potential MVT mineralization. Weights of evidence and logistic regression were used independently to integrate and generate posterior probability maps showing areas of potential mineralization based on all derived evidence maps. Results indicate that in spite of the lack of important data sets such as stream or lake sediment geochemistry, Landsat-TM data and regional geological data can be useful for MVT mineral-potential mapping.     

Combined gamma and M-test-based ANN and ARIMA models for groundwater fluctuation forecasting in semiarid regions

The shortage of surface water in arid and semiarid regions has led to the more use of the groundwater resources. In these areas, the groundwater is essential for activities such as water supply and irrigation. One of the most important stages in sustainable yield of groundwater resources is awareness of groundwater level. In this study, we have applied artificial neural networks (ANN) and autoregressive integrated moving average (ARIMA) models for groundwater level forecasting to 4 months ahead in Shiraz basin, southwestern Iran. Time series analysis was conducted according to the Box–Jenkins method. Meanwhile, gamma and M-test were considered for determining the optimal input combination and length of training and testing data in the ANN model. The results indicated that performance of multilayer perceptron neural network (4, 14, 1) and ARIMA (2, 1, 2) is satisfactory in the groundwater level forecasting for one month ahead. The performance comparison shows that the ARIMA model performs appreciably better than the ANN.     

Probabilistic rainfall thresholds for flood forecasting: evaluating different methodologies for modelling rainfall spatial correlation (or dependence)

Rainfall threshold (RT) method is one of the evolving flood forecasting approaches. When the cumulative rainfall depth for a given initial soil moisture condition intersects the threshold rainfall curve, the peak discharge is expected to be equal or greater than the threshold discharge for flooding at the target site. Besides the total rainfall depth, spatial and temporal distribution of rainfall impacts the flood peak discharge and the time to peak. To revisit a previous study conducted by the authors, in which spatially independent rainfall pattern was assumed, the spatial distribution of rainfall was simulated following a Monte Carlo approach. The structure of the spatial dependence among sub‐watersheds' rainfalls was taken into account under three different scenarios, namely independent, bivariate copula (2copula) and multivariate Gaussian copula (MGC). For each set of generated random dimensionless rainfalls, the probabilistic RT curves were derived for dry moisture condition. Results were evaluated with both historical and simulated events. For the simulated events, threshold curves were assessed by means of categorical statistics, such as hit rate, false rate and critical success index (CSI). Results revealed that the best performance based on the CSI criterion corresponded to 50% curve in 2copula and MGC scenarios as well as 90% curve in the independent scenario. The recognition of 50% curve in 2copula and MGC scenarios is in agreement with our expectations that the mean probable curve should have the best performance. Moreover, the proposed inclusion of spatially dependent rainfall scenario improved the performance of RT curves by about 25% in comparison with the presumed spatially uniform rainfall scenario. Copyright © 2011 John Wiley & Sons, Ltd.     

基于科学知识图谱的干旱区城镇化文献计量分析

通过CiteSpace对1984—2020年中国知网(CNKI)中干旱区城镇化研究的2703篇文献进行分析,利用发文时间分布、作者与机构共现、关键词共现和突现词检测分析了干旱区城镇化研究的发文趋势、阶段划分、核心作者与机构网络、主题演变与历史热点.相关研究的发文量先升后降,可以划分出萌芽、快速、蓬勃、成熟4个时期.涌现...     

Monitoring and projection of climate change impact on 24-h probable maximum precipitation in the Southeast of Caspian Sea

Natural Hazards - Due to the impacts of climate change on probable maximum precipitation (PMP) and its importance in designing hydraulic structures, PMP estimation is crucial. In this study, the...     

A real-time operation optimization model for flood management in river-reservoir systems

In this paper, a new methodology has been developed for real-time flood management in river-reservoir systems. This methodology is based upon combining a Genetic Algorithm (GA) reservoir operation optimization model for a cascade of two reservoirs, a hydraulic-based flood routing simulation model in downstream river system, a Geographical Information System (GIS) based database, and application of K-Nearest Neighbor (K-NN) algorithm for development of optimal operating rules. The GA optimization model estimates the optimal hourly reservoirs’ releases to minimize the flood damages in the downstream river. GIS tools have also been used for specifying different land-uses and damage functions in the downstream floodplain and it has been linked to the unsteady module of HEC-RAS flood routing model using Hec-GeoRAS module. An innovative approach has also been developed using K-NN algorithm to formulate the optimal operating rules for a system of two cascade reservoirs based on optimal releases obtained from the optimization model. During a flood event, the K-NN algorithm searches through the historical flood hydrographs and optimal reservoir storages determined by the optimization model to find similar situations. The similarity between the hydrographs is quantified based on the slopes of rising and falling limbs of inflow hydrographs and reservoir storages at the beginning of each hourly time step during the flood events for two cascade reservoirs. The developed methodology have been applied to the Bakhtiari and Dez River-Reservoir systems in southwest of Iran. The results show that the proposed models can be effectively used for flood management and real-time operation of cascade river-reservoir systems.     

Comparison of classification and clustering methods in spatial rainfall pattern recognition at Northern Iran

Pattern recognition is the science of data structure and its classification. There are many classification and clustering methods prevalent in pattern recognition area. In this research, rainfall data in a region in Northern Iran are classified with natural breaks classification method and with a revised fuzzy c-means (FCM) algorithm as a clustering approach. To compare these two methods, the results of the FCM method are hardened. Comparison proved overall coincidence of natural breaks classification and FCM clustering methods. The differences arise from nature of these two methods. In the FCM, the boundaries between adjacent clusters are not sharp while they are abrupt in natural breaks method. The sensitivity of both methods with respect to rain gauge density was also analyzed. For each rain gauge density, percentage of boundary region and hardening error are at a minimum in the first cluster while the second cluster has the maximum error. Moreover, the number of clusters was sensitive to the number of stations. Since the optimum number of classes is not apparent in the classification methods and the boundary between adjacent classes is abrupt, use of clustering methods such as the FCM method, overcome such deficiencies. The methods were also applied for mapping an aridity index in the study region where the results revealed good coincidence between the FCM clustering and natural breaks classification methods.     

Dynamic analysis of structures using lanczos co-ordinates

A procedure for deriving the Lanczos vectors is explained and their use in structural dynamics analysis as an alternative to modal co-ordinates is discussed. The vectors are obtained by an inverse iteration procedure in which orthogonality is imposed between the vectors resulting from successive iteration cycles. Using these Lanczos vectors the equations of motion are transformed to tridiagonal form, which provides for a very efficient time-stepping solution. The effectiveness of the method is demonstrated by a numerical example.