The factors controlling the distribution of carbonate content in Kuwait Bay sediments

The present study has been undertaken to determine the nature and the factors controlling the distribution of carbonate content in Kuwait Bay sediments. The carbonate content that may be deposited with Kuwait Bay sediments is attributed to the interplay of the deposits fallout from the dust storms over Kuwaiti territory, the deposits carried in suspension by the currents from Shatt Al-Arab area and to the skeletal parts of microorganisms that may be originated in the sediments. The carbonate content increases in the coarse sediments rather than in the fine sediments. The mineral components of the carbonate present are in the form of calcite, aragonite and some dolomite. Therefore, the texture of the sediments, the rate of deposition in addition to the biological interference may exert a considerable control over carbonate distribution.     

Possible Impacts of Climate Change on Soil Moisture Availability in the Southeast Anatolia Development Project Region (GAP): An Analysis from an Agricultural Drought Perspective

This paper presents probable effects of climate change on soil moisture availability in the Southeast Anatolia Development Project (GAP) region of Turkey. A series of hypothetical climate change scenarios and GCM-generated IPCC Business-as-Usual scenario estimates of temperature and precipitation changes were used to examine implications of climate change for seasonal changes in actual evapotranspiration, soil moisture deficit, and soil moisture surplus in 13 subregions of the GAP. Of particular importance are predicted patterns of enhancement in summer soil moisture deficit that are consistent across the region in all scenarios. Least effect of the projected warming on the soil moisture deficit enhancement is observed with the IPCC estimates. The projected temperature changes would be responsible for a great portion of the enhancement in summer deficits in the GAP region. The increase in precipitation had less effect on depletion rate of soil moisture when the temperatures increase. Particularly southern and southeastern parts of the region will suffer severe moisture shortages during summer. Winter surplus decreased in scenarios with increased temperature and decreased precipitation in most cases. Even when precipitation was not changed, total annual surplus decreased by 4 percent to 43 percent for a 2°C warming and by 8 percent to 91 percent for a 4°C warming. These hydrologic results may have significant implications for water availability in the GAP as the present project evaluations lack climate change analysis. Adaptation strategies – such as changes in crop varieties, applying more advanced dry farming methods, improved water management, developing more efficient irrigation systems, and changes in planting – will be important in limiting adverse effects and taking advantage of beneficial changes in climate.     

Prediction of the sawing quality of Marmarit stones using the capability of artificial neural network

The sawing rate is one of the most significant and effective parameters in extracting building stones via diamond wire sawing. This parameter designates the capability of diamond wire sawing for sawing different stones; in addition, the parameter gives rise to economical considerations for quarry designers. In this study, the existent relations between stone geotechnical parameters and the sawing rate of stones via diamond wire sawing were analyzed using regression and correlation coefficient as well as the collected data from Marmarit stone quarries. Moreover, we estimated the sawing rate of Marmarit using the dimensional stone rock mass rating (DSRMR); upon comparison of the data obtained from DSRMR our pre‐collected data on quarries, we did not gain satisfactory results from DSRMR, hence we used artificial neural network (ANN). The results showed that the percentage of Silica, the coefficient of water absorption, the uniaxial compressive strength (UCS), and abrasive hardness are the proper parameters for creating the ANN. Discontinuities have the least effects possible on diamond wire sawing. Having given the training possibility of the ANN, and its ability to evaluate relations among input parameters, the ANN, which was being trained with Marmarit's traits, was an accurate network for estimating diamond wire sawing in Marmarit quarries, although it could not generalize this network for other stones such as Chini and Crystal. Copyright © 2011 John Wiley & Sons, Ltd.     

Geography of contamination: The location of industrial waste dumps in Catalonia

The handling of the solid industrial waste (SIW) generated in Catalonia is one of the main problems of industrial and territorial policy confronting the public bodies controlling this area of activity. The most recent estimates in this regard indicate that the annual production of SIW is 1,700,000 tons and that only 300,000 tons are treated.In this situation it is usual for a large number of industries to eliminate their SIW furtively, it is common practice to dump waste in various unprepared areas. In this article we present a series of hypotheses which we believe allow us to understand the logic that guides the siting of a large number of these dumps.In the first place we demonstrate the importance of a series of conditions derived from the same industrial logic, to wit, a) the cost of transporting the SIW to the dumps, b) the industrial decentralization process and the metropolitan development of Catalonia, c) vertical integration and the appearance of companies especially dedicated to the elimination of waste and, d) the development of land use through revaluation of the land and greater possibilities for control forces furtive dumps to be sited in more and more distant areas.Secondly, we examine the role of public bodies in this process, concentrating on the characteristics of the legal system and the real effectiveness of urban controls. Finally, in third place, an explanation is given of research carried out in the Barcelona area which shows the importance of the conditions examined above.     

Spatial distribution and temporal variation of reference evapotranspiration in arid and semi‐arid regions of Iran

Analysis of spatial and temporal variations of reference evapotranspiration (ET_o) is important in arid and semi‐arid regions where water resources are limited. The main aim of this study was to analyse the spatial distribution and the annual, seasonal and monthly trends of the Penman–Monteith ET_o for 21 stations in the arid and semi‐arid regions of Iran. Three statistical tests the Mann‐Kendall, Sen's slope estimator and linear regression were used for the analysis. The analysis revealed that ET_o increased from January to July and deceased from July to December at almost all stations. Additionally, higher annual ET_o values were found in the southeast of the study region and lower values in the northwest of the region. Although the results showed both positive and negative trends in annual ET_o series, ET_o generally increased, significantly so in six (～30%) of the stations. Analysis of the impacts of meteorological variables on the temporal trends of ET_o indicated that the increasing trend of ET_o was most likely due to a significant increase in minimum air temperature, while decreasing trend of ET_o was mainly caused by a significant decrease in wind speed. At the sites where increasing ET_o trends were statistically significant, the rate of increase varied from (+)8·36 mm/year at Mashhad station to (+)31·68 mm/year at Iranshahr station. On average, an increasing trend of (+)4·42 mm/year was obtained for the whole study area during the last four decades. Seasonal and monthly ET_o have also tended to increase at the majority of the stations. The greatest numbers of significant trends were observed in winter on the seasonal time‐scale and in September on the monthly time‐scale. Copyright © 2011 John Wiley & Sons, Ltd.     

Distribution of diagenetic alterations within depositional facies and sequence stratigraphic framework of fluvial sandstones: Evidence from the Petrohan Terrigenous Group,Lower Triassic,NW Bulgaria

Sequence stratigraphy of fluvial deposits is a controversial topic because changes in relative sea level will eventually have indirect impact on the spatial and temporal distribution of depositional facies. Changes in the relative sea level may influence the accommodation space in fluvial plains, and hence have impact on types of fluvial system, frequency of avulsion, and style of vertical and lateral accretion. This study aims to investigate whether depositional facies and changes in the fluvial system of the Lower Triassic Petrohan Terrigenous Group sandstones (NW Bulgaria) in response to changes in the relative sea level have an impact on the spatial and temporal distribution of diagenetic alterations.     

A traversing system to measure bottom boundary layer hydraulic properties

This study describes a new convenient and robust system developed to measure benthic boundary layer properties, with emphasis placed on the determination of bed shear stress and roughness height distribution within estuarine systems by using velocity measurements. This system consisted of a remotely operated motorised traverser that allowed a single ADV to collect data between 0 and 1 m above the bed. As a case study, we applied the proposed traversing system to investigate bottom boundary layer (BBL) hydraulic properties within Coombabah Creek, Queensland, Australia. Four commonly-employed techniques: (1) Log-Profile (LP); (2) Reynolds stress (RS); (3) Turbulent Kinetic Energy (TKE); and (4) Inertial Dissipation (ID) used to estimate bed shear stresses from velocity measurements were compared. Bed shear stresses estimated with these four methods agreed reasonably well; of these, the LP method was found to be most useful and reliable. Additionally, the LP method permits the calculation of roughness height, which the other three methods do not. An average value of bed shear stress of 0.46 N/m², roughness height of 4.3 mm, and drag coefficient of 0.0054 were observed within Coombabah Creek. Results are consistent with that reported for several other silty bed estuaries.     

Implementation of baroclinic terms in a three-dimensional hydrodynamic model and its application to Anzali Port, Iran

Baroclinic terms have been implemented in a three-dimensional fully hydrodynamic model developed by Badiei et al. [2008. A three-dimensional non-hydrostatic boundary fitted model for free surface flows. International Journal for Numerical Methods in Fluids, 56(6), 607-627] modifying its momentum equations to account for density gradients and utilizing the scalar (salinity, temperature, etc.) conservation equation (SCE) and a state equation for the calculation of density. In the solution of advection-diffusion terms of the governing Navier-Stokes equations (NSE) and SCE, a symmetric splitting method was applied to ensure the long-term stability of simulations. Correction terms proposed by Ruddic et al. (1995) were applied to SCE to ensure the conservation of the scalar quantity. In the presence of baroclinic terms, the zero gradient pressure in the vertical direction in the vicinity of surface and bottom boundaries assumed by Badiei et al. [2008. A three-dimensional non-hydrostatic boundary fitted model for free surface flows. International Journal for Numerical Methods in Fluids, 56(6), 607-627] created spurious currents. This problem was solved by assuming a hydrostatic pressure variation at those boundaries. The ability of extended model was validated by comparing its results with an experimental test case. The simulation of hydrodynamic and salt intrusion at Anzali Port located at the southern coasts of Caspian Sea in Iran was carried out by the model with both barotropic and baroclinic modes. The simulated results with baroclinic mode show a better agreement with measured data as compared to the results of barotropic mode that clearly demonstrate the significance of baroclinic terms in the simulation of cyclic intrusion of salt wedge into the Port Basin.