Radiative association of C and P, and Si and P atoms

The rate coefficients for the formation of carbon monophosphide (CP) and silicon monophosphide (SiP) by radiative association are estimated for temperatures ranging from 300 to 14 100 K. In this temperature range, the radiative association rate coefficients are found to vary from  1.14 × 10⁻¹⁸  to  1.62 × 10⁻¹⁸ cm³ s⁻¹  and from  3.73 × 10⁻²⁰  to  7.03 × 10⁻²⁰ cm³ s⁻¹  for CP and SiP, respectively. In both cases, rate coefficients increase slowly with the increase in temperature.     

DDO photometry and metallic abundances of E and SO galaxies and globular clusters of the LMC and SMC

Metallicity of 8 E and SO galaxies as well as that of red globulars of the LMC and SMC were obtained by means of DDO integrated photometry calibrated with galactic globular clusters (Bica and Pastoriza, 1983; hereafter referred to as Paper I). A correction was obtained in order to reduce the colors of the galaxies to zero redshift. The relation metallicity vsM _V for the galaxies is analyzed (adding to our sample the observations of McClure and Van den Bergh, 1968; and Faber, 1973a). For the Magellanic Clouds we found metallicity ranging from intermediate to poor.     

Radii and Albedos of four Trojan asteroids and Jovian satellites 6 and 7

Thermal radiation has been detected from four asteroids of the Trojan group, and J6 and J7, the brightest of the outer satellites of Jupiter. The six objects all have exceedingly low geometric albedos of 0.02 or 0.03 according to calculations based on their known visual brightness and the measured thermal fluxes. 624 Hektor, the largest object studied here, has a radius of 110 ± 20 km, though the exact shape of this body is in question. While the sample observed in this work is small (the total number of Trojans larger than 0.25 km in radius is about 1000), the fact that all four studied have similarly low albedos suggests that this property is characterisic of the Trojans and at least two of the outer members of Jupiter's retinue of satellites. The low surface albedo of the Trojans may preclude the proposed origin of the Jovian group of comets among these bodies according to E. Rabe. Updated tables of the dimensions of all the Jovian satellites are given.     

Uranus and Neptune: Shape and rotation

Both Uranus and Neptune are thought to have strong zonal winds with velocities of several 100 m s⁻¹. These wind velocities, however, assume solid-body rotation periods based on Voyager 2 measurements of periodic variations in the planets’ radio signals and of fits to the planets’ magnetic fields; 17.24 h and 16.11 h for Uranus and Neptune, respectively. The realization that the radio period of Saturn does not represent the planet’s deep interior rotation and the complexity of the magnetic fields of Uranus and Neptune raise the possibility that the Voyager 2 radio and magnetic periods might not represent the deep interior rotation periods of the ice giants. Moreover, if there is deep differential rotation within Uranus and Neptune no single solid-body rotation period could characterize the bulk rotation of the planets. We use wind and shape data to investigate the rotation of Uranus and Neptune. The shapes (flattening) of the ice giants are not measured, but only inferred from atmospheric wind speeds and radio occultation measurements at a single latitude. The inferred oblateness values of Uranus and Neptune do not correspond to bodies rotating with the Voyager rotation periods. Minimization of wind velocities or dynamic heights of the 1 bar isosurfaces, constrained by the single occultation radii and gravitational coefficients of the planets, leads to solid-body rotation periods of ∼16.58 h for Uranus and ∼17.46 h for Neptune. Uranus might be rotating faster and Neptune slower than Voyager rotation speeds. We derive shapes for the planets based on these rotation rates. Wind velocities with respect to these rotation periods are essentially identical on Uranus and Neptune and wind speeds are slower than previously thought. Alternatively, if we interpret wind measurements in terms of differential rotation on cylinders there are essentially no residual atmospheric winds.     

Substructure and the cusp and fold relations

Gravitational lensing of a background source by a foreground galaxy lens occasionally produces four images of the source. The cusp and the fold relations impose conditions on the ratios of magnifications of these four-image lenses. In this theoretical investigation, we explore the sensitivity of these relations to the presence of substructure in the lens. Starting with a smooth lens potential, we add varying amounts of substructure, while keeping the source position fixed, and find that the fold relation is a more robust indicator of substructure than the cusp relation for the images. This robustness is independent of the detailed spatial distribution of the substructure, as well as of the ellipticity of the lensing potential and the presence of external shear.     

Gravity and Topography of Moon and Planets

Planetology serves the understanding on the one hand of the solar system and on the other hand, for investigating similarities and differences, of our own planet. While observational evidence about the outer planets is very limited, substantial datasets exist for the terrestrial planets. Radar and optical images and detailed models of gravity and topography give an impressive insight into the history, composition and dynamics of moon and planets. However, there exists still significant lack of data. It is therefore recommended to equip all future satellite missions to the moon and to planets with full tensor gravity gradiometers and radar altimeters.     

Fragmentation and hydration of tektites and microtektites

Abstract— An examination of data collected over the last 30 years indicates that the percent of glass fragments vs. whole splash forms in the Cenozoic microtektite strewn fields increases towards the source crater (or source region). We propose that this is due to thermal stress produced when tektites and larger microtektites fall into water near the source crater while still relatively hot (>1150 °C). We also find evidence (low major oxide totals, frothing when melted) for hydration of most of the North American tektite fragments and microtektites found in marine sediments. High-temperature mass spectrometry indicates that these tektite fragments and microtektites contain up to 3.8 wt% H₂O. The H₂O-release behavior during the high-temperature mass-spectrometric analysis, plus high CI abundances (0.05 wt%), indicate that the North American tektite fragments and microtektites were hydrated in the marine environment (i.e., the H₂O was not trapped solely on quenching from a melt). The younger Ivory Coast and Australasian microtektites do not exhibit much evidence of hydration (at least not in excess of 0.5 wt% H₂O); this suggests that the degree of hydration increases with age. In addition, we find that some glass spherules (with <65 wt% SiO₂) from the upper Eocene clinopyroxene-bearing spherule layer in the Indian Ocean have palagonitized rims. These spherules appear to have been altered in a similar fashion to the splash form K/T boundary spherules. Thus, our data indicate that tektites and microtektites that generally contain >65 wt% SiO₂ can undergo simple hydration in the marine environment, while impact glasses (with <65 wt% SiO₂) can also undergo palagonitization.     

Local solar magnetic and velocity field development and related photospheric and chromospheric activity

We have compiled the results of our long-term studies of the local magnetic field and its activity development, derived from investigating sunspot group evolution, photoelectrically measured longitudinal magnetic and velocity fields, and measurements of sunspot proper motions. We estimate certain regularities according to which the magnetic and velocity fields, and photospheric, as well as chromospheric activities develop. We speculate about the physical background of such processes.Dedicated to Cornelis de Jager     

On universal elements,and conversion procedures to and from position and velocity

An element set is advocated that is familiar (in traditional terms), and yet applicable to every type of conic-section orbit without loss of accuracy. It is not free of singularity, but this is not a serious deficiency. Conversion procedures, to and from position and velocity, are outlined, with Fortran-77 listings appended. Tests have indicated that the errors in the pair of procedures are minimal, accuracy being limited only by computer precision and the (fixed) number of iterations used in the Kepler-equation solutions.     

Osculating and Superosculating Intermediate Orbits and their Applications

A method of construction of intermediate orbits for approximating the real motion of celestial bodies in the initial part of trajectory is proposed. The method is based on introducing a fictitious attracting centre with a time-variable gravitational parameter. The variation of thisparameter is assumed to obey the Eddington–Jeans mass-variationlaw. New classes of orbits having first-, second-, and third-order tangency to the perturbed trajectory at the initial instant of time are constructed. For planar motion, the tangency increases by one or two orders. The constructed intermediate orbits approximate the perturbed motion better than the osculating Keplerian orbit and analogous orbits of otherauthors. The applications of the orbits constructed in Encke's methodfor special perturbations and in the procedure for predicting themotion in which the perturbed trajectory is represented by a sequenceof short arcs of the intermediate orbits are suggested.The use of the constructed orbits is especially advantageous in the investigation of motion under the action of large perturbations.     

Lunar dust and lunar simulant activation and monitoring

Abstract— NASA plans to resume human exploration of the Moon in the next decade. One of the pressing concerns is the effect that lunar dust (the fraction of the lunar regolith <20 μm in diameter) will have on systems, both human and mechanical, due to the fact that various problems were caused by dust during the Apollo missions. The loss of vacuum integrity in the lunar sample containers during the Apollo era ensured that the present lunar samples are not in the same condition as they were on the Moon; they have been passivated by oxygen and water vapor. To mitigate the harmful effects of lunar dust on humans, methods of “reactivating” the dust must be developed for experimentation, and, ideally, it should be possible to monitor the level of activity to determine methods of deactivating the dust in future lunar habitats. Here we present results demonstrating that simple grinding, as a simple analog to micrometeorite crushing, is apable of substantially activating lunar dust and lunar simulant, and it is possible to determine the level of chemical activity by monitoring the ability of the dust to produce hydroxyl radicals in aqueous solution. Comparisons between ground samples of lunar dust, lunar simulant, and quartz reveal that ground lunar dust is capable of producing over three times the amount of hydroxyl radicals as lunar simulant and an order of magnitude more than ground quartz.     

Shapes and gravitational moments of satellites and asteroids

The shapes and gravitational moments of tidally and rotationally distorted satellites with nonuniform internal density distributions are calculated. Spacecraft determinations of the radii and (a) the gravitational moments of some satellites of Jupiter and Saturn, particularly Io, Ganymede and Titan or (b) the shapes of some others, particularly Mimas and Tethys, could provide unambiguo3s evidence of either internal differentiation or orbital evolution. The shapes of rotationally distorted asteroids are discussed briefly.     

Martian surface and crust: Review and synthesis

Mariner 9 data and earlier data are combined to investigate the nature of the classical markings on Mars. This leads to a model of crustal evolution and structure. Combination of radar and spectrophotometric data strengthens earlier evidence for petrologic distinctions between surface materials in dark and light regions. The classical surface markings are a complex result of three influences: (1) availability of two types of rock material transportable by wind, (2) topographic control of deposition, and (3) prevailing winds producing quasipermanent preferential deposition patterns. The crust, especially in the Tharsis region, bears strong evidence of mantle-induced uplift of a type recognized on Earth as long ago as 1939. Such uplifts have obliterated ancient craters, caused fractures, and graben systems such as the Coprates canyon, and resulted in intense volcanism. This evidence, combined with an apparent bimodal hypsometric diagram, indicates Mars has current or recent mantle activity sufficient to disturb the crust, aid in petrologic differentiation, and cause development of protocontinental units, but insufficient to cause full-fledged continental drift or fold-causing plate collisions as are common on Earth.     

Emerging and Decaying Magnetic Flux and Subsurface Flows

We study the temporal variation of subsurface flows of 788 active regions and 978 quiet regions. The vertical-velocity component used in this study is derived from the divergence of the measured horizontal flows using mass conservation. The horizontal flows cover a range of depths from the surface to about 16 Mm and are determined by analyzing about five years of GONG high-resolution Doppler data with ring-diagram analysis. We determine the change in unsigned magnetic flux during the disk passage of each active region using MDI magnetograms binned to the ring-diagram grid. We then sort the data by their flux change from decaying to emerging flux and divide the data into five subsets of equal size. The average vertical flows of the emerging-flux subset are systematically shifted toward upflows compared to the grand average values of the complete data set, whereas the average flows of the decaying-flux subset show comparably more pronounced downflows especially near 8 Mm. For flux emergence, upflows become stronger with time with increasing flux at depths greater than about 10 Mm. At layers shallower than about 4 Mm, the flows might start to change from downflows to upflows, when flux emerges, and then back to downflows after the active regions are established. The flows in the layers between these two depth ranges show no response to the emerging flux. In the case of decaying flux, the flows change from strong upflows to downflows at depths greater than about 10 Mm, whereas the flows do not change systematically at other depths. A cross-correlation analysis shows that the flows in the near-surface and the deeper layers might change about one day before flux emerges. The flows associated with the quiet regions fluctuate with time but do not show any systematic variation.     

Galactic and Stellar Dynamics: Limits and Perspectives

An elementary review about stellar and galactic dynamics is presented. Despite involving extremely classical Newtonian physics, stellar dynamics presents some fundamental difficulties rarely discussed in the literature, such as why the phase space distribution is assumed to be a smooth function of coordinates. Many systems are found to be unstable over intermediate time-scales, as more instabilities have been discovered over the years, so the old aim of describing equilibrium stable systems shifts presently toward understanding evolutive systems. From the linearized variational Boltzmann equation a distinction can be made between instabilities triggered by the chaotic part of phase space, and instabilities caused by steep gradients in the velocity part of the distribution function. The new challenges to include evolutive systems can presently only be studied efficiently with computer techniques. Future studies are likely to involve orders of magnitude more advanced computers in which parallelism will play a major role. This revised version was published online in July 2006 with corrections to the Cover Date.     

Convection regions and coronas of sun and stars

Photospheric models were calculated for 90 stars with effective temperatures between 2500 K and 41600 K for five logg-values ranging from 1 to 5. Molecule formation was taken into account. In order to have an idea about possible instabilities in the different stellar layers some quantities, characteristic for convection and turbulence were calculated, such as the Rayleigh-, Reynolds-, Prandtl- and Péclet-numbers. It turned out that all the investigated stars contain unstable layers, including the hottest. Nevertheless, only stars with effective temperatures of 8300 K or less contain layers where the convective energy transport is important. For all stars the convective velocities were calculated and also the generated mechanical fluxes in the convection zones were tabulated.Under the hypothesis that this mechanical energy flux is responsible for the heating of the corona, coronal models were constructed for the Sun and for some stars with effective temperatures between 5000 K and 8320 K for logg-values of 4 or 5.For Main Sequence stars the largest fluxes are generated in F-stars; stars withT _eff=7130 K and logg=4 possess also the hottest and most dense coronas with a computed temperature of 3.7·10⁶ K and logN _e =10.5.The solar corona computed in this way, on the basis of a photospheric mechanical flux of 0.14·10⁸ erg cm^–2 sec^–1, has a temperature of 1.3·10⁶ K and logN _e =9.8. This density is apparently too high, but even when including in the computations all theoretical refinements proposed in the last few years by various authors it does not appear possible to obtain a solar coronal model with a smaller density.However, when taking into account the inhomogeneous structure of the chromosphere and by associating the calculated mechanical fluxes to the coarse mottles, and lower fluxes to the undisturbed regions we find a mean coronal temperature of 1.1·10⁶ K and a mean logN _e -values of 9. The computed velocity of the solar wind at a distance of 10⁴ km above the photosphere has a value between 7 and 11 km sec^–1. These latter values are in fair agreement with the observations.