珠江河口铜、铅、锌、铬和镉对单细胞藻类生长的影响

通过现场采水样和实验室模拟,研究珠江河口环境在一连串变化过程中,当各种浓度的Cu,zn,Pb,Cr和Cd单独存在或共存时,对单细胞藻类——硅藻和扁藻的毒性影响。     

黄东海海区总悬浮物散射特性研究

我国黄东海水体散射特性非常复杂,这是造成该海域水色区划特点显著的原因之一。文中利用2003年4月黄东海试验数据(HD200304)对总悬浮物(TSM,Total Suspended Matter)的后向散射概率~bbs和单位散射系数bs*进行研究。基于对现场数据的统计分析,我们开发了总悬浮物后向散射概率模型,通过相对偏差分析表明,有近90%的样品反演相对偏差控制在±30%之内。对总悬浮物单位散射系数研究时,选择555 nm为参考波段,开发了不同波段间总悬浮物单位散射系数关系模型,通过相对偏差分析表明,有近94%的样品反演相对偏差在±10%之内,反演效果非常好。     

波浪作用下潜标拖缆动力学分析

对三维潜标拖缆在规则波作用下的动力响应进行了研究,首先基于集中质量法给出了缆绳在规则波作用下的控制方程,然后提出了两种不同类型的自由端边界条件:质点型和艇型自由端边界条件,前者把拖体视为作三个自由度线运动的质点,而后者把拖体视为作六自由度运动的艇体,最后用有限差分法进行了数值研究。数值计算结果表明潜标拖缆在规则波的作用下,不仅作近似的简谐振动,还会在横向、垂向产生一个偏移量,该偏移量的大小随浪向角的变化而变化,另外受遭遇频率的影响,振动的幅值也随浪向角的变化而呈现不同的特征。     

Simple determination of dimethylsulfide (DMS) and dimethylsulfoniopropionate (DMSP) using solid-phase microextraction and gas chromatography-mass spectrometry

Solid-phase microextraction (SPME) is a simple, sensitive and less destructive method for the determination of dimethylsulfide (DMS) in seawater. Combined with detection by gas chromatography-mass spectrometry (GC-MS), the method had sufficient sensitivity (minimum detectable concentration of DMS was 0.05 nM), and practical levels of reproducibility (relative standard deviation ≤7%) and linearity (r ² > 0.995) over a wide concentration range (0.5 to 910 nM). The protocol developed was applied to a Sagami Bay water sample to determine concentrations of DMS and DMSP, and in situ DMSP-lyase activity.     

Eddy Shedding from the Kuroshio Bend at Luzon Strait

TOPEX/POSEDIENT-ERS satellite altimeter data along with the mean state from the Parallel Ocean Climate Model result have been used to investigate the variation of Kuroshio intrusion and eddy shedding at Luzon Strait during 1992–2001. The Kuroshio penetrates into the South China Sea and forms a bend. The Kuroshio bend varies with time, periodically shedding anticyclonic eddies. Criteria of eddy shedding are identified: 1) When the shedding event occurs, there are usually two centers of high Sea Surface Height (SSH) together with negative geostrophic vorticity in the Kuroshio Bend (KB) area. 2) Between the two centers of high SSH there usually exists positive geostrophic vorticity. These criteria have been used to determine the eddy shedding times and locations. The most frequent eddy shedding intervals are 70, 80 and 90 days. In both the winter and summer monsoon period, the most frequent locations are 119.5°E and 120°E, which means that the seasonal variation of eddy shedding location is unclear.     

高效液相色谱法测量青海湖浮游植物色素浓度

2003年8月，我们利用高效液相色谱法(HPLC)对浮游植物色素进行分类定量分析。结果表明青海湖的叶绿素类以叶绿素a和b为主，叶绿素a浓度最高；光合作用类胡萝卜素种类极少，浓度很低；光保护色素种类较多，浓度较高，其中以Zea，Diadino，β．β-Car和Viola为主。     

Geodynamics of the deep sedimentary basin of the Caspian Sea region: paragenetic correlation of seismicity and mud volcanism

In this paper we analyze seismic regime and earthquake depth distribution and correlation of seismicity and mud volcanism in the Azerbaijan and the Caspian Sea region. For the present region we have calculated accurate source locations, seismic activity, earthquake repetition and released earthquake energy parameters. It is shown that the active tectonic processes in the region are concentrated within the thick sedimentary cover that we consider as a general source of contemporary stress and a main structural element responsible for the origin of regional earthquakes. The correlation of seismicity and mud volcanism is of paragenetic character.     

应用Argo资料分析西北太平洋冬、夏季水团

应用Argo剖面浮标观测的温、盐度资料,分析了西北太平洋海域冬、夏季的温、盐度分布、水团结构及其分布。首先采用T-S点聚图法分析了该海域水团分布的基本情况,由点聚分析结果可知,该海域至少存在6种以上水团;再用模糊聚类软化法对水团作进一步划分,分别计算了该海域6至11类水团的F和△F值,结果表明,冬、夏季的△F值都以划分为8类时为最大,这与大洋水团的稳定性是一致的,因此,该海域冬、夏季水团以划分为8类最佳,它们分别是北太平洋热带表层水、北太平洋次表层水、北太平洋中层水、北太平洋副热带模态水、北太平洋深层水和赤道表层水,以及南太平洋次表层水和南太平洋中层水。     

激光扫描共聚焦显微镜在海洋动物发育生物学上的应用

激光扫描共聚焦显微镜具有成像清晰、获得三维图像、进行多标记观察等优势。本文扼要介绍了激光扫描共聚焦显微镜的原理和特点,着重阐述了激光扫描共聚焦显微镜在海洋动物配子发生;受精过程中细胞内Ca~(2 )变化、肌动蛋白转移和蛋白激酶变化;胚胎和幼体发育的三维成像等研究领域中的应用。并对LSCM在DNA含量、RNA含量等领域的定量、定性前景进行展望。     

ARGO剖面浮标数据质量控制过程剖析

ARGO计划的观测目标是能取得精度分别为0．5℃和0．01PSU的海水温度和盐度资料。然而，由于目前海水盐度是采用海水电导率间接导出的，而测量海水电导率的传感器很容易产生偏差。因此，必须对获得的ARGO数据进行质量控制。文章详细介绍了ARGO剖面浮标资料实时质量控制模式和延时质量控制模式及其采用的质量控制方法等。