Sylvite and halite on particles recovered from 25143 Itokawa: A preliminary report

We observed cross sectional ultra‐thin sections near the surface of 12 particles recovered from the S‐type asteroid Itokawa by the Hayabusa spacecraft in 2010, using spherical aberration–corrected STEM and conventional TEM. Although their mineralogy is almost identical to the equilibrated LL chondrites and therefore basically anhydrous, micrometer‐to‐submicrometer‐sized sylvite was identified on the surface of Itokawa particle RA‐QD02‐0034. Separately, micrometer‐sized halite was also identified on the surface of Itokawa particle RA‐QD02‐0129. Detailed inspection of the sample processing procedures at the JAXA's Planetary Materials Sample Curation Facility and textural observation of the sylvite and halite indicate that they were clearly present on two Itokawa particles before they were removed from Clean Chamber #2 at JAXA. However, there is no direct evidence for their extraterrestrial origin at present. If the sylvite and halite are extraterrestrial, their presence suggests that they may be more abundant on the surface of S‐type asteroids than previously thought.     

The Hinode (Solar-B) Mission: An Overview

The Hinode satellite (formerly Solar-B) of the Japan Aerospace Exploration Agency’s Institute of Space and Astronautical Science (ISAS/JAXA) was successfully launched in September 2006. As the successor to the Yohkoh mission, it aims to understand how magnetic energy gets transferred from the photosphere to the upper atmosphere and results in explosive energy releases. Hinode is an observatory style mission, with all the instruments being designed and built to work together to address the science aims. There are three instruments onboard: the Solar Optical Telescope (SOT), the EUV Imaging Spectrometer (EIS), and the X-Ray Telescope (XRT). This paper provides an overview of the mission, detailing the satellite, the scientific payload, and operations. It will conclude with discussions on how the international science community can participate in the analysis of the mission data. T. Kosugi deceased 26 November 2006.     

Densification and grain coarsening of melting snow

1　IntroductionSnowdensificationiscriticalforcalculationsinengineering glaciology,snowavalancheforecasting ,springflooding,andotherpracticalaspects.Itisalsoimportantforinterpretingicecoredataincludingthosetakenfromratherwarmsiteswheresurfacelay ersexperiencemelting ,sinceitwouldaffectthechangeofannuallayerthicknesswithtime.Whileextensivestudies(e.g .AndersonandBenson 1 963 ;Bader1 960 ,1 962 ;Koji ma 1 95 4,1 95 5 ,1 95 6,1 95 7,1 95 8,1 95 9,1 964;Keeler 1 967;Gow 1 975 ;MaenoandE binuma 1…     

Verifying adequacy of the seismic deformation method by using real examples of earthquake damage

In a seismic design, the dynamic loads are generally dependent on the inertial interaction caused by earthquake. But for the foundations embedded in soil, the dynamic loads are influenced by both the inertial and kinematic interactions among superstructure, foundation and soil. Especially, when a foundation is embedded in soft surface ground, the effects due to the kinematic interaction increase and should be considered in seismic design. For this reason, a method called seismic deformation method (SDM), which is suitable for an intensive earthquake motion (level 2 earthquake motion), has been stipulated recently in a new design code called Seismic Design Code for railway structures (the Railway Code, drawn up by Railway Technical Research Institute, Japan, 1999) [Railway Technical Research Institute. Seismic Design Code for railway structures. Tokyo: Maruzen; 1999]. In order to grasp the suitability of the SDM to actual structures, pile foundations, which experienced the Hyogoken-Nanbu earthquake, were taken as the objects for investigations. Comparison studies between the SDM analysis and reconnaissance were conducted. As a result, the adequacy of the SDM to actual foundations was confirmed to prove good agreement between the two results from the viewpoint of engineering practice.In addition, determination of indices for seismic-performance evaluation and speculation of damage mechanism of the foundations are also discussed in this paper.     

Effects of Lime‐Based Waste Materials on Immobilization and Phytoavailability of Cadmium and Lead in Contaminated Soil

Low cost lime‐based waste materials have recently been used to immobilize metals in contaminated soils. This study was conducted to evaluate the effects of oyster shells and eggshells as lime‐based waste materials on immobilization of cadmium (Cd) and lead (Pb) in contaminated soil, as well as their effects on metal availability to maize plants (Zea mays L.). Oyster shells and eggshells were applied to soils at 1 and 5% w/w, after which they were subject to 420 days of incubation. The toxicity characteristic leaching procedure (TCLP) test was employed to determine the mobility of Cd and Pb in soils. The results showed that the addition of waste materials effectively reduced the metal mobility as indicated by the decrease in the concentration of TCLP‐extractable Cd and Pb, and this was mainly due to significant increases in soil pH (from 6.74 in untreated soil to 7.85–8.13 in treated soil). A sequential extraction indicated that the addition of such alkaline wastes induced a significant decline in the concentration of Cd in the exchangeable fraction (from 23.64% in untreated soil to 1.90–3.81% in treated soil), but it increased the concentration of Cd in the carbonate fraction (from 19.59% in untreated soil to 36.66–46.36% in treated soil). In the case of Pb, the exchangeable fraction was also reduced (from 0.67% in untreated soil to 0.00–0.01% in treated soil), and the fraction of Pb bound to carbonate was slightly increased (from 16.61% in untreated soil to 16.41–18.25% in treated soil). Phytoavailability tests indicated that the metal concentrations in the shoots of maize plant were reduced by 63.39–77.29% for Cd and by 47.34–75.95% for Pb in the amended soils, with no significant differences being observed for the amendment types and the application rates. Overall, these results indicate that oyster shells and eggshells can be used as low cost lime‐based amendments for immobilizing Cd and Pb in contaminated soils.     

Latitudinal distribution of HDO abundance above Venus’ clouds by ground-based 2.3 μm spectroscopy

The abundance of HDO above the clouds in the dayside atmosphere of Venus was measured by ground-based 2.3 μm spectroscopy over 4 days. This is the first HDO observation above the clouds in this wavelength region corresponding to a new height region. The latitudinal distributions found show no clearly defined structure. The disk-averaged mixing ratio is 0.22 ± 0.03 ppm for a representative height region of 62–67 km. This is consistent with measurements found in previous studies. Based on previous H₂O measurements, the HDO/H₂O ratio is found to be 140 ± 20 times larger than the telluric ratio. This lies between the ratios of 120 ± 40 and 240 ± 25, respectively, reported for the 30–40 km region by ground-based nightside spectroscopy and for the 80–100 km region by solar occultation measurement on board the Venus Express.     

A water flow model of the active crater lake at Aso volcano,Japan: fluctuations of magmatic gas and groundwater fluxes from the underlying hydrothermal system

The first crater of Nakadake, peak of Aso volcano, Japan, contains a hot water lake that shows interesting variations in water level and temperature. These variations were discovered by precise, continuous observations of the lake independent of precipitation. We developed a numerical model of a hot crater lake and compared with observational data for the period from July 2006 to January 2009. The numerical model revealed seasonal changes in mass flux (75–132 kg/s) and enthalpy (1,840–3,030 kJ/kg) for the fluid supplied to the lake. The relation between the enthalpy and mass flux indicates that the bottom input fluid is a mixture of high- and low-temperature fluids. Assuming a mixture of high-temperature steam at 800°C and liquid water at 100°C, we evaluated the liquid and steam fluxes. The liquid water flux shows a seasonal increase lagging behind the rainy season by 2 months, suggesting that the liquid water is predominantly groundwater. The fluctuation pattern in the flux of the high-temperature steam shows a relation with the amplitude of volcanic tremor, suggesting that heating of the hydrothermal system drives the tremor. Consequently, precise observations of a hot crater lake represent a potential method of monitoring volcanic hydrothermal systems in the shallow parts of the volcanoes.     

Hemispherical distribution of CO above the Venus’ clouds by ground-based 2.3 μm spectroscopy

The abundance of carbon monoxide in the Venus’ dayside atmosphere above the clouds was measured by ground-based 2.3 μm spectroscopy for 4 days. The hemispherical distributions found show no significant latitudinal or longitudinal structure. The disc-averaged mixing ratio of 58 ± 17 ppm found at a representative height of 62-67 km is consistent with previous measurements. Such a flat distribution of CO abundance above the clouds seems to be controlled by an efficient horizontal eddy diffusion with a time scale of 30 days or shorter although the CO distribution below the clouds seems to be controlled by the meridional circulation. The pole-ward wind speed of the meridional circulation above the clouds is estimated to be 0.2 m s⁻¹ or less based on the difference between the CO mixing ratios above and below the clouds.     

3-D Simulation of Earthquake Generation Cycles and Evolution of Fault Constitutitve Properties

--The earthquake generation cycle consists of tectonic loading, quasi-static rupture nucleation, dynamic rupture propagation and stop, and subsequent stress redistribution and fault restrengthening. From a macroscopic point of view, the entire process of earthquake generation cycles should be consistently described by a coupled nonlinear system of a slip-response function, a fault constitutive law and a driving force. On the basis of such a general idea, we constructed a realistic 3-D simulation model for earthquake generation cycles at a transcurrent plate boundary by combining the viscoelastic slip-response function derived for a two-layered elastic-viscoelastic structure model, the slip- and time-dependent fault constitutive law that has an inherent mechanism of fault restrengthening, and the steady relative plate motion as a driving force into a single closed system. With this model we numerically simulated the earthquake generation cycles repeated in a seismogenic region on a plate interface, and examined space-time changes in shear stress, slip deficits and fault constitutive properties during one complete cycle in detail. The occurrence of unstable dynamic slip brings about decrease both in fault strength and shear stress to a constant residual level. After the arrest of dynamic slip, the breakdown strength drop j†_p of fault is restored rapidly and the process of stress accumulation resumes in the seismogenic region. On the other hand, the restoration of the critical weakening displacement D_c proceeds gradually with time through the interseismic period. The restoration of D_c can be regarded as the macroscopic manifestation of the microscopic recovery process of fractal fault surface structure. Through numerical simulation with a multi-segmented fault model, we examined the effects of viscoelastic fault-to-fault interaction. The effect of transient viscoelastic stress transfer through the asthenosphere is significant as well as the direct effect of elastic stress transfer, and it possibly explains the time lag of the sequential occurrence of large events along a plate boundary.