Gonadal histology and serum vitellogenin levels of bigeye tuna Thunnus obesus from the Northern Pacific Ocean--absence of endocrine disruption bio-indicators

Endocrine disrupting chemicals such as organochlorines have been detected in a large number of marine fish. Histological observation of the gonads, measurement of serum vitellogenin (VTG) level and of liver polychlorinated biphenyl (PCB) content were performed to evaluate the reproductive health and the contamination with endocrine disruptors in bigeye tuna Thunnus obesus, collected in the northern Pacific Ocean in 1999 and 2000. Abnormalities commonly found in species affected by endocrine disruptors such as the presence of oocytes in the testis or elevated serum VTG levels were not found in any of males examined. Both males and females had only small amounts of liver PCB content. The results suggest that currently there is little if any risk of organochlorine contamination or endocrine disruption of gonadal function in bigeye tuna from the northern Pacific Ocean. However, further studies are necessary to evaluate the health status of the open sea fishery resources.     

Characteristics and implication of clay minerals in the northern and southern parts of the Chelung-pu fault, Taiwan

In this study, we report the characteristics of clay minerals present in the Chelung-pu fault in Taiwan. In the 1999 Chi-Chi earthquake, different slip motions were recorded along the Chelung-pu fault in the northern and southern parts of the fault. The characteristics of clay minerals present in the fault zones can be attributed to the differences in motion. We analyzed the shallow drill core samples obtained from the northern and southern sites penetrating the fault. The clay minerals identified in most of the samples from both the sites are smectite, illite, and chlorite. There are illite–smectite mixed layers with a high illite content and no chlorite–smectite mixed layer. In some samples, no smectite is detected. We also examined the iron content and symmetry of iron and magnesium in the silicate and hydroxide layers in chlorite. At the northern site, the total iron content in chlorite of gouge is larger than that of the host rocks. On the other hand, at the southern site, the total iron content varies widely. It is hypothesized that the smectite consumption and differences in the characteristics of chlorite may be controlled by the differences in the lithology, fluid chemistry, fluid temperature, or fault activities (heating or breakage) between the northern and southern sites.     

Variations in turbulent energy dissipation and water column stratification at the entrance of a tidally energetic strait

We observed tidal currents, turbulent energy dissipation and water column stratification at the entrance of a narrow strait (Neko Seto) in the Seto Inland Sea, Japan, using a free-falling turbulent microstructure profiler (TurboMAP) and acoustic Doppler current profiler (ADCP). The variation in turbulent energy dissipation at the entrance of the strait was not at quarter-diurnal frequency but at semi-diurnal frequency; turbulent energy dissipation was enhanced during the ebb tide, although it was moderate during the flood tide. This result is consistent with the results of Takasugi (1993), which showed the asymmetry of tidal energy loss during a semidiurnal tidal cycle using control volume analysis. It is suggested that significant turbulent energy dissipation is generated in the strait, which influences the properties of water outside the strait when tidal currents flow out from the strait.     

Influence of cluster environments on X-ray cluster morphology

We investigated the influence of environment on cluster morphology by examining the alignment of the cluster position angle with respect to the nearest neighbour cluster. The cluster position angle and ellipticity were measured using high spatial resolution X-ray data taken from the Chandra archive, while the nearest neighbour sample was extracted from the Abell cluster catalogue. We found high confidence for an alignment when neighbour distance (Dn) was less than  70  h ⁻¹  Mpc, while we found no significant variations of the confidence level at various values of Dn less than  70  h ⁻¹  Mpc.     

A model with rigid rotations and slip deficits for the GPS-derived velocity field in Southwest Japan

We interpret the GPS-derived velocity field in southwest Japan by a superposition of the elastic deformation caused by fault interactions (slips or slip deficits) on the rigid motion of tectonic blocks (or plates). Based on the strain rate field and crustal seismicity, we apply a model with three blocks (Inner Arc, Outer Arc, and the northern Ryukyu block) and slip deficits along the block boundaries.Several characteristics of the synthesized contributions are found:

(1) Westward motion of the outer arc relative to the Amurian plate and the inner arc,

(2) southeastward motion of the northern Ryukyu block relative to the Amurian plate,

(3) 2−4 mm/yr deficits of left lateral slip rates along the boundary at 32°N in southern Kyushu,

(4) 0−8 mm/yr deficits of right lateral slip rates along the Median Tectonic Line and the Beppu-Shimabara Graben,

(5) slip deficit rates on the plate interface smaller than those in the case without any consideration for rigid block motions,

(6) clockwise deflection of slip deficit rate vector on the plate interface from that estimated when not taking rigid block motions into consideration.

Analysis of primary production in the Seto Inland Sea, Japan, using a simple ecosystem model

A simple model of lower trophic level ecosystem has been created to analyze possible environmental control of primary production in eight sub-areas of the Seto Inland Sea. The primary production rates observed by Hashimotoet al. (1997a) in these sub-areas are well reproduced by the model, including horizontal processes such as horizontal transport of nutrients and vertical processes such as vertical mixing, light intensity and sinking of particulate matter. Without taking account of horizontal processes the model also successfully reproduces the observed primary production rates in some areas, but if fails to reproduce those in the others. This shows that the relative importance of the horizontal transport on the primary production differs are by area. Two time scales,T _z andT _H, are introduced to explain this difference.T _z is a vertical cycling time of material, which is defined as the time during which the stock of the material in the water column is utilized for primary production;T _H is the horizontal transit time of the material. The relative importance of the horizontal process is well explained by theT _H/T _z ratio; that is, the horizontal transport process is important in the areas where this ratio is small. Further the possible mechanisms of nutrient supply for the primary production in each sub-area are investigated using this model.     

Current Nature of the Kuroshio in the Vicinity of the Kii Peninsula

The Kuroshio flows very close to Cape Shionomisaki when it takes a straight path. The detailed observations of the Kuroshio were made both on board the R/V Seisui-maru of Mie University and on board the R/V Wakayama of the Wakayama Prefectural Fisheries Experimental Station on June 11–14, 1996. It was confirmed that the current zone of the Kuroshio touches the coast and bottom slope just off Cape Shionomiaki, and that the coastal water to the east of the cape was completely separated from that to the west. The relatively high sea level difference between Kushimoto and Uragami could be caused by this separation of the coastal waters when the Kuroshio takes a straight path. This flow is rather curious, as the geostrophic flow, which has a barotropic nature and touches the bottom, would be constrained to follow bottom contours due to the vorticity conservation law. The reason why the Kuroshio leaves the bottom slope to the east of Cape Shionomisaki is attributed to the high curvature of the bottom contours there: if the current were to follow the contours, the centrifugal term in the equation of motion would become large and comparablee to the Coriolis (or pressure gradient) term, and the geostrophic balance would be destroyed. This creates a current-shadow zone just to the east of the cape. As the reason why the current zone of the Kuroshio intrudes into the coastal region to the west of the cape, it is suggested that the Kii Bifurcation Current off the southwest coast of the Kii Peninsula, which is usually found when the Kuroshio takes the straight path, has the effect of drawing the Kuroshio water into the coastal region. The sea level difference between Kushimoto and Uragami is often used to monitor the flow pattern of the Kuroshio near the Kii Peninsula. It should be noted that Uragami is located in the current shadow zone, while Kushimoto lies in the region where the offshore Kuroshio water intrudes into the coastal region. The resulting large sea level difference indicates that the Kuroshio is flowing along the straight path.     

Petrography of Late Cambrian to Middle Ordovician radiolarian chert in Kazakhstan with special reference to the emergence of benthic animals in the pelagic realm

Upper Cambrian to Middle Ordovician radiolarian chert successions from Kazakhstan were studied to clarify the history of the emergence of benthic animals in ocean floor sediments. Radiolarian tests and clay were deposited for a period of 30 Myr without experiencing an influx of continent-derived coarse clastic materials. Red, grey and black cherts of the Upper Cambrian to the upper mid-Darriwilian are thinly laminated, and no trace of benthic animal activity is recognized in that time interval. Bioturbation structures and burrow traces in mid-Darriwilian stage red chert in Kazakhstan suggest that benthic animals colonized the location where radiolarian chert formed, but that there was a significant delay in colonization when compared with similar reported occurrences in Australia and Canada.     

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.     

Variations in snowmelt energy and energy balance characteristics with larch forest density on Mt Iwate,Japan: observations and energy balance analyses

The variation in snowmelt energy and energy components were evaluated with respect to forest density. Surface snowmelt rates, surface evaporation from snow cover and meteorological elements were measured in the open and under sparse (411 trees/ha) and dense (1433 trees/ha) larch canopies. The surface snowmelt rate decreased as the forest density increased. Based on the observations and energy balance analyses, we concluded the following. (1) Albedo decreased while the bulk coefficient for latent heat increased with forest density. (2) The duration of snowmelt increased with forest density because the energy for nocturnal cooling of the snow cover decreased. (3) When comparing the open and forested sites, the changes in snowmelt energy with forest density were caused by sensible heat flux. However, the contribution of net radiation was highest in the forested sites. Therefore, the effects of forest cover on the snowmelt energy were different when comparing both the open and forested sites and the sparse and densely forested sites. (4) The ratio of net radiation to snowmelt energy increased with forest density; although both snowmelt energy and net radiation decreased with increased forest density, the snowmelt energy decreased more rapidly. Sensible heat also decreased as forest density increased. Both albedo and downward long‐wave radiation influenced net radiation. Copyright © 1999 John Wiley & Sons, Ltd.