Features of clay minerals in the YSDP102 core on the continental shelf of the southeast Yellow Sea

Ninety-eight clay mineral samples from the YSDP102 core were analyzed by x-ray diffractometer to study the four clay minerals: illite, chlorite, kaolinite and smectite. Twenty-eight samples had been analyzed on the laser particle-siz eanalyzer to reveal the particle features of the sediments. Distribution of the clay minerals and the particle characteristics in the YSDP102 core show that the core experienced three different depositional periods and formed three different sedimentary intervals due to different sediment sources and different depositional environments. Features of the clay minerals and the heavy minerals in the YSDP102 core indicate that coarse-grained sediments and fine-grained sediments result from different sources. The Yellow Sea Warm Current has greatly influenced the sedimentary framework of this region since the current‘s formation.     

Selection of environmental conditions for nearshore structure design

1　Introduction　InChina ,coastalcitiesaremostlyregionaleconomicdevelopmentcenters.Becauseoftheirspecialgeogra phiclocations ,typhoonsandassociatedstormsurgescauseheavylossesoflivesandproperties.In 1 992 Qing daowasfloodedduetothecoincidenceoftheastrono m…     

Experiments on the kinetics of partial melting of a leucogranite at 200 MPa H<Subscript>2</Subscript>O and 690–800°C: compositional variability of melts during the onset of H<Subscript>2</Subscript>O-saturated crustal anatexis

We have experimentally investigated the kinetics of melting of an aplitic leucogranite (quartz+sodic plagioclase of ≈Ab₉₀+K-feldspar+traces of biotite) at 690, 740, and 800°C, all at 200 MPa H₂O. Leucogranite cylinders, 3.5 mm in diameter and 7 mm in length, were run in the presence of excess H₂O using cold-seal pressure vessels for 11–2,925 h. At 690 and 740°C and any experimental time, and 800°C and short run times, silicate glass (melt at run conditions) occurs as interconnected films along most of the mineral boundaries and in fractures, with the predominant volume occurring along quartz/feldspars boundaries and quartz/plagioclase/K-feldspar triple junctions. Glass film thickness is roughly constant throughout a given experimental charge and increases with experimental temperature and run duration. The results indicate that H₂O-saturated partial melting of a quartzo-feldspathic protolith will produce an interconnected melt phase even at very low degrees (<5 vol%) of partial melting. Crystal grain boundaries are therefore completely occluded with melt films even at the lowest degrees of partial melting, resulting in a change in the mechanism of mass transport through the rock from advection of aqueous vapor to diffusion through silicate melt. At 690 and 740°C the compositions of glasses are homogeneous and (at both temperatures) close to, but not on, the H₂O-saturated 200 MPa haplogranite eutectic; glass compositions do not change with run duration. At 800°C glasses are heterogeneous and plot away from the minimum, although their molar ratios ASI (=mol Al₂O₃/CaO+Na₂O+K₂O) and Al/Na are constant throughout the entire charge at any experimental time. Glass compositions within individual 800°C experiments form linear trends in (wt%) normative quartz–albite–orthoclase space. The linear trends are oriented perpendicular to the 200 MPa H₂O haplogranite cotectic line, reflecting nearly constant albite/orthoclase ratio versus variable quartz/feldspar ratio, and have endpoints between the 800°C isotherms on the quartz and feldspar liquidus surfaces. With increasing experimental duration the trends migrate from the potassic side of the minimum toward the bulk rock composition located on the sodic side, due to more rapid (and complete) dissolution of K-feldspar relative to plagioclase. The results indicate that partial melting at or slightly above the solidus (690–740°C) is interface reaction-controlled, and produces disequilibrium melts of near-minimum composition that persist metastably for up to at least 3 months. Relict feldspars show no change in composition or texture, and equilibration between melt and feldspars might take from a few to tens of millions of years. Partial melting at temperatures well above the solidus (800°C) produces heterogeneous, disequilibrium liquids whose compositions are determined by the diffusive transport properties of the melt and local equilibrium with neighboring mineral phases. Feldspars recrystallize and change composition rapidly. Partial melting and equilibration between liquids and feldspars might take from a few to tens of years (H₂O-saturated conditions) at these temperatures well above the solidus.     

Geochemical and O-isotope constraints on the evolution of lithospheric mantle in the Ross Sea rift area (Antarctica)

Peridotite xenoliths found in Cenozoic alkali basalts of northern Victoria Land, Antarctica, vary from fertile spinel-lherzolite to harzburgite. They often contain glass-bearing pockets formed after primary pyroxenes and spinel. Few samples are composite and consist of depleted spinel lherzolite crosscut by amphibole veins and/or lherzolite in contact with poikilitic wehrlite. Peridotite xenoliths are characterized by negative Al₂O₃–Mg# and TiO₂–Mg# covariations of clino- and orthopyroxenes, low to intermediate HREE concentrations in clinopyroxene, negative Cr–Al trend in spinel, suggesting variable degrees of partial melting. Metasomatic overprint is evidenced by trace element enrichment in clinopyroxene and sporadic increase of Ti–Fe_tot. Preferential Nb, Zr, Sr enrichments in clinopyroxene associated with high Ti–Fe_tot contents constrain the metasomatic agent to be an alkaline basic melt. In composite xenoliths, clinopyroxene REE contents increase next to the veins suggesting metasomatic diffusion of incompatible element. Oxygen isotope data indicate disequilibrium conditions among clinopyroxene, olivine and orthopyroxene. The highest δ¹⁸O values are observed in minerals of the amphibole-bearing xenolith. The δ¹⁸O_cpx correlations with clinopyroxene modal abundance and geochemical parameters (e.g. Mg# and Cr#) suggest a possible influence of partial melting on oxygen isotope composition. Thermobarometric estimates define a geotherm of 80°C/GPa for the refractory lithosphere of NVL, in a pressure range between 1 and 2.5 GPa. Clinopyroxene microlites of melt pockets provide P–T data close to the anhydrous peridotite solidus and confirm that they originated from heating and decompression during transport in the host magma. All these geothermometric data constrain the mantle potential temperature to values of 1250–1350°C, consistent with the occurrence of mantle decompressional melting in a transtensive tectonic regime for the Ross Sea region.     

Evaluation of an ensemble of Arctic regional climate models: spatiotemporal fields during the SHEBA year

Simulations of eight different regional climate models (RCMs) have been performed for the period September 1997–September 1998, which coincides with the Surface Heat Budget of the Arctic Ocean (SHEBA) project period. Each of the models employed approximately the same domain covering the western Arctic, the same horizontal resolution of 50 km, and the same boundary forcing. The models differ in their vertical resolution as well as in the treatments of dynamics and physical parameterizations. Both the common features and differences of the simulated spatiotemporal patterns of geopotential, temperature, cloud cover, and long-/shortwave downward radiation between the individual model simulations are investigated. With this work, we quantify the scatter among the models and therefore the magnitude of disagreement and unreliability of current Arctic RCM simulations. Even with the relatively constrained experimental design we notice a considerable scatter among the different RCMs. We found the largest across-model scatter in the 2 m temperature over land, in the surface radiation fluxes, and in the cloud cover which implies a reduced confidence level for these variables. An erratum to this article can be found at     

三维城市模型的构建及其在噪音污染分析中的应用

本文提出了综合利用二维矢量数据、航空影像和激光测距与距离修正数据建立三维城市模型的技术路线,并在此基础上探索了城市噪音污染信息在现有三维城市模型中的建模和可视化方法。     

西沙群岛珊瑚礁海域浮游动物群落结构初步分析*

为了解西沙群岛珊瑚礁海域浮游动物的群落特征, 于2015年5月末至7月初在西沙群岛8个岛礁(七连屿、永兴岛和东岛3个岛屿以及浪花礁、盘石屿、玉琢礁、华光礁和北礁5个环礁)进行了浮游动物采样, 分析了浮游动物的多样性、丰度和群落结构特征, 并比较了5个环礁潟湖内和向海礁坡区浮游动物群落组成的差异。调查海域共鉴定浮游动物180种(包括浮游幼虫13个类群), 其中桡足类最多, 达83种, 其次是水母类(38种)、浮游软体类(14种)、毛颚类(11种)和浮游被囊类(7种); 浮游动物平均丰度为256.4±117.8个·m^-3, 桡足类占总丰度的51.08%, 其次是浮游幼虫(16.30%)、浮游被囊类(13.22%)和毛颚类(7.70%)。浮游动物种数、多样性和均匀度指数、丰度在岛屿和环礁之间以及环礁的潟湖区和向海礁坡区均存在差异; 浮游动物多样性和丰度在东岛、玉琢礁和华光礁较高, 而在七连屿和北礁较低; 5个环礁向海礁坡区的浮游动物多样性和丰度皆高于潟湖区的。多元统计分析结果表明调查岛礁的浮游动物可划分两个聚群(相似水平85%); 岛屿近岸及环礁的潟湖群落(Ⅰ)和岛屿远岸及环礁的向海礁坡群落(Ⅱ); 两个聚群浮游动物组成差异较显著(r=0.832, p<0.001); 前者的种数、多样性指数、总丰度和主要浮游动物类群如桡足类、毛颚类和浮游幼虫的丰度显著低于后者。环礁潟湖区和向海礁坡区的空间异质性和生态环境差异可能是导致浮游动物群落结构呈现不同特征的主要因素。     

基于TM影像的北京城乡结合部土地利用变化分析

利用遥感分类技术能够快速获取土地利用变化信息。基于1996年和2006年两时相的北京城乡结合部地区TM卫星影像数据,采用监督分类和分类后处理方法,对研究区10年间的土地利用变化情况进行了详细分析,得到如下结论:10年间北京城南地区城乡结合部的各种土地利用类型之间相互转化,并以耕地,林地和建设用地相互转化最为显著;耕地和大范围水域面积较大幅度减少,城市居民点及工矿用地和未利用土地面积大幅度地增加,城乡结合部的范围在10年间从北向南进行了大范围地移动。     

地理国情监测中地貌形态识别研究——以汶川地震核心灾区为例

监测地理国情,是经济社会发展到一定阶段的必然要求,地貌形态数据是重要的基础地理信息,地理国情监测中地貌形态识别是一项必要的基础工作。本文根据25m分辨率的DEM数据,以绝对高程和地形起伏度为地貌形态识别指标,建立适合汶川地震核心灾区的分类分级指标体系,采用数据分割的方法获得研究区6种地貌形态的分布图,识别结果真实可靠,对后续工作具有一定借鉴和指导意义。