Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.     

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.     

预应力锚索在公路高陡边坡加固整治工程中的应用

预应力锚索锚固技术以其结构合理、工艺灵巧、适应性广、施工速度快、造价低等优势，目前已广泛应用于各工程领域。在桂（林）—柳（州）高速公路高边坡加固工程中采用了该项技术，经过近1年的运转表明，效果良好。对该项工程作了详细讨论，介绍了边坡的地质条件、稳定性分析和设计参数的选取，总结了施工中锚索的造孔、下索、注浆、张拉锁定等设计及施工要点。     

汽车底盘技术在HGY-1500型钻机中的应用

在HGY-1500型钻机的设计中应用汽车底盘技术，选用汽车变速器、离合器等零部件；钻机分动箱采用斜齿圆柱齿轮传动，使用接合套式换挡装置进行换挡，提高了钻机工作的可靠性，降低了生产成本，减轻了钻机质量，操作轻松、方便。     

用于砾石夹层钻进的新型PDC钻头的研制与使用

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。     

高压旋喷桩有关问题的探索和研究

通过工程实例，介绍了单管法高压旋喷桩施工工艺、技术参数、施工中存在的问题以及注意事项。阐述了一些常见故障及预防措施。     

复合土钉墙支护技术在某大型软土基坑围护中的应用

根据拟建建筑基坑的工程地质条件、周边环境条件、基坑开挖深度等特点综合考虑，对基坑分段采用超前微型桩支护加土钉墙、放坡加土钉墙2种复合支护方案。实践证明，该工程所采用的多种复合式支护实施方案，技术安全可靠，经济合理。     

长沙某高边坡支护设计优化

结合长沙某高边坡支护工程实例，详细研究边坡岩土条件及环境条件，充分挖掘岩土参数潜力：≯耋翌睾；方綦建藉蓑术、经济对比分析，优选锚杆网格梁法进行边坡加固支护。实践表明，锚杆网格梁法是一种加固高边坡性价比很好的方法。     

虚拟样机技术在地质工程机械领域的应用研究

基于对国内地质工程机械的研发现状的考虑，根据虚拟样机技术的特点，讨论了在地质工程机械领域实施虚拟样机技术的必要件，并提出了建立地质工程机械虚拟样机的策略。联合PRO／E、ANSYS及ADAMS建立了气动潜孔锤的虚拟样机模型，对气动潜孔锤虚拟样机进行了仿真，阐明了虚拟样机技术在地质工程机械领域的应用前景。     

硬致密泥岩钻进的新型复合片钻头的研究与应用

介绍了一种新型齿形的复合片钻头，在硬致密泥岩中钻进，与常规复合片钻头相比，具有很高的钻进效率和高的钻头寿命，解决了泥岩钻进效率低的难题。