降水井改造为原位生产井的工艺设计及应用

为有效地扩大油页岩原位开采区域和节约油页岩原位开采的成本,需将废置的降水井改造成为原位生产井。根据降水井与原位生产井井身结构的相似性,对农安油页岩原位开采先导试验工程基地的降水井改造工艺进行了设计和优化。同时研发了偏心轮式套管割管装置及三爪式套管打捞装置用于拔管施工。工程实践证明,该工艺具有步骤简单、合理、高效以及价格低廉等特点。偏心轮式套管割管装置及三爪式套管打捞装置应用在降水井改造中,均取得理想的效果。     

Using Geomechanical Method to Predict Tectonic Fractures in Low-Permeability Sandstone Reservoirs

Understanding and interpreting the timing, location, orientation, and intensity of natural fractures within a geological structure are commonly important to both exploration and production planning activities of low-porosity and low-permeability carbonate reservoirs. In this study, we explore the application of comprehensive geomechanical methods to quantitatively characterize the fracture parameters based on Strain Energy Density Theory, such as linear fracture density and volume fracture density. This study approach is based on the idea that energy generated by tectonic stress on brittle sandstone,which can be distinguished fracture surface energy, friction energy dissipation and residual strain energy and natural fractures can be interpreted or inferred from geomechanical-model-derived strains. For this analysis, we model an extension and compression compound fault block developed in a mechanically stratified sandstone and shale sequence because mechanics experimental data and drilling data exist that can be directly compared with model results.However, the results show that the approach and our study conclusion are independent of the specified structural geometry, which can correlate fracture parameters in different stages with different tectonic activities, and finally build and visualize fracture networks in sandstone. The presence or absence of filling minerals in fractures is shown to strongly control the destruction and transformation of low-permeability sandstone, and this control possesses crucial implications for interpreting fracture aperture and reservoir flow simulation.     

高压下天然菱铁矿的压缩性和电子结构研究

采用同步辐射光源和金刚石对顶砧(DAC)技术,对天然菱铁矿的压缩性和电子结构进行了原位X射线衍射(XRD)和X射线吸收近边结构谱(XANES)测试研究。在室温下随着压力逐渐升高至50.2 GPa,菱铁矿保持方解石型结构不变,但是逐渐向Na Cl型结构转变;刚性[CO3]2-基团平行于ab-平面定向排列使c轴的压缩性大于a轴。菱铁矿在44.6~47.1 GPa之间发生电子由高自旋态(HS)向低自旋态(LS)的转变,表现为体积塌陷8%。HS菱铁矿的等温状态方程参数为K0=112(5)GPa和K'0=4.6(3)。首次采用XANES技术对菱铁矿中Fe2+的电子结构进行了研究,结果表明:随着压力升高至37.3 GPa,Fe2+的配位和局域对称并未发生明显变化;此后电子结构开始转变,Fe2+的3d轨道分裂能降低,电子跃迁概率增大,呈现LS特性。     

仿生高效切削齿试验研究

在仿生高效耐磨理论的指导下,以鼹鼠爪趾为仿生原型,引入了其经长期进化而具有的高效、耐磨的特性。选用CVD多晶金刚石为切削齿的切削单元,采用真空热压烧结工艺制备仿生高效切削齿,并将其与常规PDC齿、仿生PDC齿的耐磨性和切削效率进行对比试验,结果显示：仿生高效切削齿的耐磨性较常规PDC齿提高23%;切削效率较常规PDC齿提高1.49倍,较仿生PDC齿提高48%。初步证明了仿生高效切削齿工艺的可行性,为下一步高效切削钻头的研究奠定了坚实的基础。     

利用父母本微卫星标记估计大菱鲆(Scophthalmus maximus L.)幼鱼生长性状的遗传参数

The estimation of genetic parameters has played an important role in animal selective breeding for growth traits.Recently studies show that molecular markers can be incorporated into genetic evaluations. In order to improve the performance of an incomplete pedigree(i.e, only parents are known) in the genetic evaluations, 12 microsatellite markers have been applied in the estimation of the genetic parameters for body weight in a farmed population(n=1 890) of juvenile turbot(Scophthalmus maximus L.). A new relatedness called parental molecular relatedness(PMR) is estimated based on results of genotyping of 48 parents(31 males, 17 females) with microsatellites markers. The feasibility of PMR in estimation of genetic parameters is verified by comparison with pedigree related(PR) which is obtained from a complete pedigree. The results demonstrate that a high correlation(0.872) between them is found. Heritabilities are estimated using the PMR(0.52±0.13) and PR(0.55±0.22) with the same animal model. A cross-validation shows that the predictive abilities of models using the PMR and the PR are identical(0.81). From that, a conclusion can be made that PMR and PR predicted genetic values equally well in a population of juvenile turbot. Therefore PMR can be applied as an alternative of the PR when only parents are known. However, for a better performance, more markers and more families should be included in a further study.     

基于微卫星(SSR)分子标记的中国对虾渤海湾增殖亲虾群体及回捕群体的遗传多样性分析

Eight microsatellite markers were used to analyze genetic diversity, level of inbreeding, and effective population size of spawner and recaptured populations of Chinese shrimp(Fenneropenaeus chinensis) during stock enhancement in the Bohai Bay in 2013. A total of 254 and 238 alleles were identified in the spawner and recaptured populations, respectively, and the numbers of alleles(N_a) were 8–63 and 6–60, respectively. The numbers of effective alleles(N_e) were 2.52–21.60 and 2.67–20.72, respectively. The polymorphism information content ranged from 0.529 to 0.952. The observed heterozygosity(H_o) values(0.638–0.910 and 0.712–0.927) were lower than the expected heterozygosity(H_e) values(0.603–0.954 and 0.625–0.952), which indicated that the two populations possessed a rich genetic diversity. In 16 tests(2 populations×8 loci), 13 tests deviated from the HardyWeinberg equilibrium. F_(is) values were positive at seven loci and the inbreeding coefficients(F) of the two populations estimated by trio ML were 13.234% and 11.603%, suggesting that there was a relatively high degree of inbreeding. A certain level of inbreeding depression had occurred in the Chinese shrimp population. F_(st) values ranged from 0 to 0.059, with a mean of 0.028, displaying a low level of genetic differentiation in the two populations. Effective population sizes(3 060.2 and 3 842.8) were higher than the minimum number suggested for retaining the evolutionary potential to adapt to new environmental conditions. For enhancement activity in 2014,the ideal number of captured shrimp spawners should have ranged from 7 686 to 19 214 to maintain genetic diversity and effective population size. Further strategies to adjust the balance of economic cost, fishing effort and ideal number of shrimp spawners to maintain a satisfactory effective population size for ensuring the sustainability of Chinese shrimp are proposed.     

Antialgal and antilarval activities of bioactive compounds extracted from the marine dinoflagellate <Emphasis Type="Italic">Amphidinium carterae</Emphasis>

With the global ban on the application of organotin-based marine coatings by the International Maritime Organization, the development of environmentally friendly, low-toxic and nontoxic antifouling compounds for marine industries has become an urgent need. Marine microorganisms have been considered as a potential source of natural antifoulants. In this study, the antifouling potential of marine dinoflagellate Amphidinium carterae, the toxic and red-tide microalgae, was investigated. We performed a series of operations to extract the bioactive substances from Amphidinium carterae and tested their antialgal and antilarval activities. The crude extract of Amphidinium carterae showed significant antialgal activity and the EC₅₀ value against Skeletonema costatum was 55.4 μg mL^?1. After purification, the isolated bioactive substances (the organic extract C) exhibited much higher antialgal and antilarval activities with EC₅₀ of 12.9 μg mL^?1 against Skeletonema costatum and LC₅₀ of 15.1 μg mL^?1 against Amphibalanus amphitrite larvae. Subsequently, IR, Q-TOFMS, and GC-MS were utilized for the structural elucidation of the bioactive compounds, and a series of unsaturated and saturated 16- to 22-carbon fatty acids were detected. The data suggested the bioactive compounds isolated from Amphidinium carterae exhibited a significant inhibiting effect against the diatom Skeletonema costatum and Amphibalanus amphitrite larvae, and could be substitutes for persistent, toxic antifouling compounds.     

黄铁矿ReOs法测年在胶东金矿中的应用初探

该次工作为黄铁矿Re-Os法测年在胶东金矿中的首次应用。在大尹格庄金矿中获得了由3件黄铁矿样品组成的(144.8±1.8)Ma等时线年龄,暗示着大尹格庄金矿区可能存在一期晚侏罗世的Au成矿事件。通过对大尹格庄、夏甸、土堆金矿黄铁矿Re-Os同位素年代学的研究,表明黄铁矿的Re-Os同位素特征在胶东金矿中具有一定的复杂性。该文总结了影响黄铁矿Re-Os同位素测年结果的因素,认为在利用该方法进行金矿床定年时,应当将不同期次黄铁矿分别送样,适当拉大采样间距,并尽可能降低实验测试误差,以期获得更精确可靠的年龄。