Ground roll attenuation based on an empirical curvelet transform

In the field of seismic exploration, ground roll seriously affects the deep effective reflections from subsurface deep structures. Traditional curvelet transform cannot provide an adaptive basis function to achieve a suboptimal denoised result. In this paper, we propose a method based on empirical curvelet transform (ECT) for ground roll attenuation. Unlike the traditional curvelet transform, this method not only decomposes seismic data into multiscale and multi-directional components, but also provides an adaptive filter bank according to frequency content of seismic data itself. So, ground roll can be separated by using this method. However, as the frequency of reflection and ground roll components are close, we apply singular value decomposition (SVD) in the curvelet domain to differentiate the ground roll and reflection better. Examples of synthetic and field seismic data reveal that the proposed method based ECT performs better than the traditional curvelet method in terms of the suppression of ground roll.     

Study and application of PS-wave pre-stack migration in HTI media and an anisotropic correction method

Anisotropy correction is necessary during the processing of converted PSwave seismic data to achieve accurate structural imaging, reservoir prediction, and fracture detection. To effectively eliminate the adverse effects of S-wave splitting and to improve PSwave imaging quality, we tested methods for pre-stack migration imaging and anisotropic correction of PS-wave data. We based this on the propagation rules of seismic waves in a horizontal transverse isotropy medium, which is a fractured medium model that reflects likely subsurface conditions in the field. We used the radial (R) and transverse (T) components of PS-wave data to separate the fast and slow S-wave components, after which their propagation moveout was effectively extracted. Meanwhile, corrections for the energies and propagation moveouts of the R and T components were implemented using mathematical rotation. The PS-wave imaging quality was distinctly improved, and we demonstrated the reliability of our methods through numerical simulations. Applying our methods to three-dimensional and three-component seismic field data from the Xinchang-Hexingchang region of the Western Sichuan Depression in China, we obtained high-quality seismic imaging with continuous reflection wave groups, distinct structural features, and specific stratigraphic contact relationships. This study provides an effective and reliable approach for data processing that will improve the exploration of complex, hidden lithologic gas reservoirs.     

设备所在楼层对设备-结构相互作用的影响

为了研究设备所在楼层位置对设备-结构相互作用的影响,以某高层钢框架为例,将设备分别放置于结构顶层和底层设计了2种设备-结构体系模型,然后利用ANSYS有限元分析软件对整体模型进行地震响应时程分析。分析结果表明:在El Centro波、Taft波和人工波作用下,当设备频率与结构基频调谐时,设备-结构相互作用会令结构动力响应减小而设备动力响应显著增大;设备-结构相互作用的大小与设备所在楼层密切相关:顶层设备与结构间的相互作用比底层更加剧烈,这与位于不同楼层的设备间等效质量以及底端输入激励频谱的差异有关。     

Elastic one-return boundary element method and hybrid elastic thin-slab propagator for strong-contrast media with sharp boundaries

In this paper, we developed the theory and algorithm of an elastic one-way boundary element method(BEM) and a corresponding hybrid elastic thin-slab propagator for earth media with sharp boundaries between strong contrast media. This approach can takes the advantage of accurate boundary condition of BEM and completely overcomes the weak contrast limitation of the perturbationtheory based one-way operator approach. The one-way BEM is a smooth boundary approximation, which avoids huge matrix operations in exact full BEM. In addition, the one-way BEM can model the primary-only transmitted and reflected waves and therefore is a valuable tool in elastic imaging and inversion. Through numerical tests for some simple models,we proved the validity and efficiency of the proposed method.     

浙江临安4.2级地震特征及烈度调查

2017年4月12日,浙江省杭州市临安市发生4.2级地震,地震震中附近的潜川镇、河桥镇震感强烈,於潜镇、太阳镇、湍口镇等震感较为明显。在对震区地质构造、震源机制解资料分析的基础上,开展了烈度调查,并绘制了地震烈度图。本次地震震中烈度为Ⅴ度,面积22.6km2,烈度圈长轴方向北东向,与马金-乌镇断层走向一致。     

相邻两井对大地震的不同水力响应模型研究——页岩影响分析

大地震引起了左家庄和宝坻(相距～50km)两井中截然不同的同震水位响应.我们用水位的气压和潮汐响应来分析解释此现象.结果表明,宝坻井的观测含水层中存在页岩,且此井受裂隙影响很大,储水效应较差.页岩的复杂裂隙或者各向异性可能会导致此井观测含水层处于半封闭状态,从而导致垂直向排水的发生.通过多方计算分析后,我们将这两口井划分为两种模型—1.水平流动模型;2.水平流动+垂直流动的混合流动模型.由于裂隙影响,宝坻井的观测含水层介质与外界的水力沟通性在震前就较强(震前渗透率就比较大),所以宝坻井观测含水层与外界的孔隙压差异较小,导致同震渗透率上升较小甚至没有变化,这些因素是导致该井同震水位变化幅度总是非常微小的原因.     

Improving gravity anomalies over China marginal sea from retracked Geosat and ERS-1 data

The quality of altimeter data and ocean tide model is critical to the recovery of coastal gravity anomalies. In this contribution, three retracking methods (threshold, improved threshold and Beta-5) are investigated with the aim of improving the altimeter data over a shallow water area. Comparison indicates that the improved threshold is the best retracking method over China Sea. Two ocean tide models, NAO99b and CSR4.0, are analyzed. Results show that different tide models used in the processing of altimeter data may result in differences more than 10 mGal in recovered coastal gravity anomalies. Also, NAO99b is more suitable than CSR4.0 over the shallow water area of China Sea. Finally, gravity anomalies over China Sea are calculated from retracked Geosat/GM and ERS-1/GM data by least squares collocation. Comparison with shipborne gravimetry data demonstrates that gravity anomalies from retracked data are significantly superior to those from non-retracked data. Our results have the same order as the other two altimeter-derived gravity models: Sandwell&Smith(V16) and DNSC08.     

移动电子地图中伪3D可视化设计

定义了移动电子地图中伪3D可视化概念,提出伪3D可视化模型,并设计了快速的三维投影变换算法。进行了移动电子地图的伪3D可视化实验设计,并给出了可视化性能测试结果。     

基于集合卡尔曼变换的区域集合预报初步研究

为了深入研究集合卡尔曼变换(Ensemble Transform Kalman Filter,ETKF)初值扰动方法,提高集合预报质量,从全球大集合预报资料中提取初始扰动场,建立区域模式的ETKF初值扰动方案,对2008年7月22日发生在中国东部的一次暴雨过程进行集合预报试验,并分析ETKF方案构造的扰动场特征和集合预报效果。结果表明,由ETKF初始扰动方案产生的扰动场大小与分布合理,能够反映观测站点的空间分布,能够保持所有正交、不相关方向的误差方差。集合预报降水落区相对控制预报有所改善,集合平均小雨和中雨TS评分和BS评分总体优于控制预报。24h集合预报的Talagrand分布优于36h预报。试验结果揭示了ETKF初值扰动方案的基本性质及利用ETKF方法进行区域集合预报的可行性。     

马达加斯加石墨矿地质特征及其成因分析

马达加斯加石墨矿资源丰富,找矿潜力大。对马达加斯加东部及西南部3个典型石墨矿床进行综合对比研究,发现其石墨矿成因类型为区域变质型,矿石工业类型以大鳞片晶质石墨为主,自然类型可分为片岩型、片麻岩型及变粒岩型,石墨矿赋矿地层为Graphite岩系。对含矿岩石进行主量元素分析,认为其原岩为富含有机质、富铝的砂质、粉砂质、泥质沉积碎屑岩;形成环境为活动大陆边缘区域和大陆岛弧区域。马达加斯加石墨矿床的形成均经历了多次变质作用,富含有机质岩石主要通过区域变质作用形成晶质石墨矿床,并在混合岩化及深层次韧性剪切作用下进一步富集成矿。