低硼氢氧化镁的制备及热分解动力学参数

本文以水合氯化镁、工业氨水为原料制备出了低硼含量的纯度 >99%的氢氧化镁和氧化镁。利用差热 -热重 (DTA- TG)、X-射线衍射 (XRD)、透射电子显微镜 (TEM)等手段 ,对氢氧化镁的热稳定性、相结构、表观状态以及脱水动力学参数进行了分析。结果为 :氢氧化镁以束状纤维和片状粉末共存 ,在 6 2 3K基本完成脱水反应生成氧化镁 ,其脱水反应的表观活化能 E为135 .4 k J· mol-1,指前因子 A为 5 .15× 10 10 ,反应级数 n为 1.10     

长竹蛏人工育苗技术的初步研究

本文对长竹蛏繁殖习性、胚胎发育和人工育苗技术关键进行研究．结果表明亲贝经暂养可促进性成熟；幼虫对温、盐度的适应较广；变态附着采用缩光培育,未经缩光的附着时间延长,存活率降低;幼虫长至约240μm变态附着,附着量在(0.6～10)×106个/m     

饵料中添加锰对中国对虾的影响

报道了在以花生饼、鱼粉、玉米粉和麸皮为基本原料,加入不同浓度梯度的锰所配制的人工饵料饲喂中国对虾(Penaeus chinensis),对其增长、增重和存活率均无明显的影响,但添加适量的锰对其肝胰脏申的羧肽酶A具有激活作用。据此认为,利用上述原料生产的配合饵料可以不添加锰,但饵料中即使含锰量较高,对对虾的生长、成活也没有害处。     

国外渔具选择性研究进展

为了保护和可持续利用渔业资源 ,渔具选择性的研究在国际上倍受重视。该文以比较作业法中渔具选择性曲线的推导 ,特别是利用扩张 SEL ECT模型推导渔具选择性曲线为例 ,介绍国外渔具选择性研究的最新进展 ,以期作为我国开展这方面研究工作的参考     

Analysis of Offshore Oil Pipeline Floating Laying

-Based on the calculation model for the floating laying of the offshore oil pipeline, this paper analyses in detail the internal force, and deformation of the pipeline under a definite structural form (pipeline and buoy) and the way of pulling. The obtained results can be used for the buoy deployment, structure design, and the determination of pulling parameters (the pulling force of the cable and its length, etc.), providing an effective analysis method for floating pipeline-laying. A calculation example is given to show the related calculation process and the main results are analyzed and discussed.     

茶皂素对几种鱼类和对虾的毒性研究

本研究以茶皂素类作为“清池剂”,试图解决对虾养殖的基础和应用技术问题。试验结果表明:对虾对茶皂素和油茶皂素有较高的耐受力;茶皂素与油茶皂素均具鱼毒活性,油茶皂素则较强。鱼种不同,中毒反应也略有差异;两种茶皂素的鱼毒速度快,在致死浓度时16h内出现中毒死亡,毒性降解也快,浓度为5×10~(-6)时40h后不再引起鱼类中毒。     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

台湾海峡毛颚动物分布的初步研究

本文分析了台湾海峡毛颚动物的种类组成、数量分布特征，并就其与环境因素的关系进行了初步探讨．结果显示与台湾海峡西部、东海等邻近海域相比，本区毛颚动物具种数少，数量小，季节变化幅度较小等特点．它的数量分布状况与闽斯沿岸流、南海西南季风漂流以及黑潮支流在本区运动消长有关。     

涠洲岛珊瑚礁生态系中浮游动植物与环境因子关系的初步探讨

本文根据1990年4月、10月间的理化分析数据，结合2002年9月涠洲岛珊瑚礁生态环境的调查状况，首次从珊瑚礁生态系的角度初步探讨该岛区浮游动植物与环境因子的关系。结果表明：该岛区浮游动植物的分布具有明显的区域性和季节性，既体现了珊瑚礁生态系具有较高的初级生产力特征，也体现了浮游动植物具有显著的季节交替现象。相关分析显示，水温、盐度、N，P，Si营养盐对浮游植物的种类组成及数量变动均有明显影响，但对浮游动物的影响不大；N是该生态系中浮游植物的限制因子，P限制状况只有在珊瑚礁生长带较深的海域出现，Si呈相对富足状态。     

Study on “J”Type Offshore Pipeline-Laying Method

-Considering both the seabed foundation and wave, an analytic model of "J" type is proposed for offshore pipeline-laying. The governing differential equation is also obtained for the pipeline on the seabed and for the suspension sections. By utilizing weighted- residual method and dual iteration technique, an approximate solution is obtained, too. In the end, calculation examples are given for analyzing the changeable relationship among the major parameters.