我国天然锌铜金属互化物的发现和特征

锌、铜金属互化物是罕见的天然合金矿物，由锌、铜两种元素组成。由于形成条件、环境不同及矿物中锌、铜元素含量不同，形成系列锌、铜金属互化物。经过对我国近二十年来发现的各类型天然锌、铜金属互化物产出的地质特征，物理、化学及光学性质进行的系统研究发现，目前我国在不同的地质体中出现多种不同类型的锌、铜金属互化物，该类矿物主要形成于高温、还原且缺硫的条件下，多数与造岩矿物共生，而与多数金属硫化物形成条件不同。     

过去5000年西太平洋副热带高压活动的泥炭纤维素碳同位素记录

文章以金川和红原两组泥炭纤维素Δδ¹³C时间序列值的反向变化来指示西太平洋副热带高压活动变化.结果表明,在过去5000年中,西太平洋副热带高压的活动可分为4个阶段,即西太平洋副热带高压位置在2800～2200B.C.期间持续偏北,2200～600B.C.期间持续偏南,600B.C.～1200A.D.期间在北进与南移之间频繁波动,以及1200～1900A.D.期间再次持续偏北,它们导致降雨量在中国大陆上不同的分布.从约1900A.D.起西太平洋副热带高压的活动似乎又开始一个新的偏南阶段,值得进一步加强研究.     

河南东濮凹陷古近系沙河街组盐岩沉积特征及成因

东濮凹陷是渤海湾盆地的一个次级构造单元，其古近系的两个沉积旋回发育了四套盐岩，分别位于沙河街组第三段的第四亚段(S34)、第三亚段(S33)、第二亚段(S32)和沙河街组的第一段(S1)。主要分布在凹陷北部。每套盐岩又由若干个盐韵律组成，每一单韵律由盐岩和泥岩组成。两套等时对比标志层（深湖沉积）之间盐岩与砂泥岩存在着相变关系。盐岩是在深盆背景下干旱成因的，盐类物质来自地下深处上涌的卤水，分层卤水是盐形成的基本形式，上涌通道是基底大断裂，动力基础是岩浆活动。盐的阻隔作用使其对下部地层的温度、压力均有影响，这种影响有利于加快盐下地层中的有机质成熟与演化。盐又是良好的盖层，且在高温、高压下盐呈塑性状态。勘探实践看出东濮凹陷的岩性油气藏与盐岩的沉积有密切的关系，因此搞清盐岩的分布规律对东濮凹陷下步勘探有着极为重要的意义。     

玛尼7.9级地震对昆仑山口西8.1级地震的触发作用及动力背景初探

根据库仑静应力变化的概念，对青藏块体中部地区1997年11月8日玛尼7．9级地震及2001年11月14日昆仑山口西8．1级地震的应力触发作用进行了初步研究。不同震源机制解计算结果表明，玛尼地震造成了昆仑地震断层面上10^-3MPa量级的库仑应力增量，该变化仅使得昆仑地震的发生提前了最长10年左右，表明当前地壳应变能水平可能并不很低。对照20世纪初以来全球7级以上强震频度和强度演化特征与地球自转变化的关系，认为地球自转幅度衰减、变化频率升高是近期强震活动的重要控制因素。昆仑山口西8．1级地震的发生，可能是地球自转持续加速阶段后期，青藏块体内部区域应力场逐渐强化，及玛尼地震应力触发的结果。     

Study of Triggering Action Between the Mani （Ms7.9） and the West Kunlun Mountains Pass （ Ms 8.1 ） Great Earthquakes and Their Dynamic Background

Based on Coulomb static stress variation, the stress trigging action of the Mani ( Ms7.9, Nov.1997) earthquake on the West Kuulun Mountains Pass (MsS.1, Nov. 2001 ) earthquake is researched. Results of different source mechanism resolutions show that a 10_3 MPa Coulomb stress due to the Mani earthquake was added to the fracture fault of the Kunlun earthquake, and this may shift the broken date to about 10 years earlier, and infer that the stress level in the crust is not low. Comparing the relationship between strong earthquake strength and frequency and earth rotation change, it is shown that the strength‘s decrease and the variation period‘ s shortening of earth rotation are important controlling factors on strong earthquake activity. This great event with Ms = 8.1 took place probably due to a gradual strengthening background of regional stress field within the Qinghai-Xizang block in the period of acceleration of change of day‘s length and stress triggering from the Mani earthquake.     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

Gravity variation before Kunlun mountain pass western Ms=8.1 earthquake

The relation between the gravity variation features and Ms=8.1 earthquake in Qinghai-Xizang monitoring area is analyzed preliminarily,by using spatial dynamic variation results of regional gravity field from absolute gravity and relative gravity observation in 1998 and 2000.The results show that:1)Ms\8.1 earthquake in Kulun mountain pass westem occurred in the gravity variation high gradient near gravity‘s high negative variation;2)The Main tectonic deformation and emnergy accumulation before MS=8.1 earthquake are distributed at south side of the epicenter;3)The range of gravity‘s high negative variation at east of the MS=8.1 earthquake epicenter relatively coincides with that rupture region according to field geology investigation;4)Gravity variation distribution in high negative value region is just consistent with the second shear strain‘s high value region of strain field obtained from GPS observation.     

路基施工沉降观测精度要求及数据处理

本文通过对路基施工沉降观测的精度分析,提出了路基施工沉降观测的精度要求；根据路基施工沉降观测的特点，提出了相应的观测措施及数据处理方法。     

GIS在轨道交通建设中的应用

介绍了GIS在城市轨道交通建设中的应用，分析了轨道交通建设的评价要素和对GIS系统的建设要求提出了系统设计的总体思路和框架及应用前景。     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.