Automatic urban building boundary extraction from high resolution aerial images using an innovative model of active contours

To present a new method for building boundary detection and extraction based on the active contour model, is the main objective of this research. Classical models of this type are associated with several shortcomings; they require extensive initialization, they are sensitive to noise, and adjustment issues often become problematic with complex images. In this research a new model of active contours has been proposed that is optimized for the automatic building extraction. This new active contour model, in comparison to the classical ones, can detect and extract the building boundaries more accurately, and is capable of avoiding detection of the boundaries of features in the neighborhood of buildings such as streets and trees. Finally, the detected building boundaries are generalized to obtain a regular shape for building boundaries. Tests with our proposed model demonstrate excellent accuracy in terms of building boundary extraction. However, due to the radiometric similarity between building roofs and the image background, our system fails to recognize a few buildings.     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.     

Location of Areas Prone to Flood Spreading Using GIS (Ilam Province,Iran)

Water Resources - The present study aimed to locate the areas prone to flood spreading in order to manage surface water resources. Therefore, the information layers of slope, land capability,...     

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.     

Random vibration of nonlinear structures with stiffness and strength deterioration by modified tail equivalent linearization method

In this research the tail equivalent linearization method(TELM) has been extended to study structures with degrading materials. The responses of such structures to excitations are non-stationary, even if the excitations are stationary. Non-stationary behavior of the system cannot be considered by conventional TELM. Applying the conventional TELM, the only distinction in the design point excitation for two stationary excitations with different durations is in the addition of a zero value part at the beginning of the design point of the longer excitation. This means that the failure probability is the same for the non-stationary systems under excitations with different durations. Therefore, this solution cannot be correct. In this study, in using TELM for systems with degrading materials, hysteretic energy is replaced by average hysteretic energy, calculated by averaging the obtained hysteretic energy of the structure subjected to a few random sample load realization. In this way, the degradation parameters under design point coincide with those under sample load realizations. Since the average of the hysteretic energy is converges very fast, the modified TELM only requires about tens to hundreds solutions of the response in addition to the ordinary calculations of conventional TELM.     

A new boundary element solution to evaluate the geometric effects of the canyon site on the displacement response spectrum

This paper presents a step-by-step procedure using the three-dimensional boundary element approach to study the behavior of semi-circular canyons under seismic shear waves. The boundary element code TDASC allows utilization for various canyon geometries, evaluation of concurrent seismic waves and calculation of the ground motions on canyons due to an excitation at any arbitrary point of the incident field. Considering the widening ratio of the canyon(including prismatic, semi-prismatic and non-prismatic canyons), wave characteristics(wavelength, dimensionless period, direction) and maximum amplification pattern, the solution was applied to carry out a series of parametric studies. It was shown that canyon form can significantly affect the displacement amplification, especially at the points located on its edges. By increasing the wave dimensionless frequency(η 1), the amplification pattern becomes more complex. On the basis of the results from a variety of considered cases, a new expression has been presented for the limiting wavelength beyond which the widening of the canyon will not have a major effect on the displacement amplification. To verify the reliability of the proposed approach, the obtained results, expressed in terms of displacement amplitude, were compared with those from the available published literature and a reasonably good agreement was observed.     

Spatial and Temporal Distribution of Dust‐Bound Trace Metal Elements around Kuhdasht Watershed Area in Iran

Dust, as a source of trace metal elements, affects the health of society. The spatial and temporal concentrations of dust‐bound trace metals (Cd, Pb, Ni, Zn, Cu, and Mn) in Kuhdasht watershed (456 km²), Lorestan Province, Iran, is investigated. Dust is collected using glass traps placed in ten research stations in the region. The spatial and temporal distribution of dust trace metals are plotted using ARC‐GIS. The highest and the lowest concentrations of Zn (9751150 mg kg^?1), Pb (46.352.9 mg kg^?1), and Cd (2.443.30 mg kg^?1) are obtained in winter, of Ni (98110 mg kg^?1) and Cu in autumn (16.053.5 mg kg^?1), and of Mn in summer (385505 mg kg^?1). The spatial concentrations of dust‐bound trace metals indicate all, except Cu, show a decreasing trend from the mountains toward the plains, similar to that of soil and of dust, except for Zn, which shows higher concentrations in dust than in soil. The potential sources of dust‐bound trace metals and their rate of contamination are also investigated using the enrichment and contamination factors. The major sources of Cd and Zn in the dust of watershed are due to anthropogenic activities or from activities outside the borders.     

Static and dynamic analysis on slope stability using a DFN-DEM approach on the right abutment of the Karun 4 dam

Uncertainty in input fracture geometric parameters during analysis of the stability of jointed rock slopes is inevitable and therefore the stochastic discrete fracture network (DFN) — distinct element method (DEM) is an efficient modeling tool. In this research, potentially unstable conditions are detected in the right abutment of the Karun 4 dam and downstream of the dam body as a case study. Two extreme states with small and relatively large block sizes are selected and a series of numerical DEM models are generated using a number of validated DFN models. Stability of the rock slope is assessed in both static and dynamic loading states. Based on the design basis earthquake (DBE) and maximum credible earthquake (MCE) expected in the dam site, histories of seismic waves are applied to analyze the stability of the slope in dynamic earthquake conditions. The results indicate that a MCE is likely to trigger sliding of rock blocks on the rock slope major joint. Furthermore, the dynamic analysis also shows a local block failure by the DBE, which can consequently lead to slope instability over the long term. According to the seismic behavior of the two models, larger blocks are prone to greater instability and are less safe against earthquakes.

     

The relationship among environmental variables,jellyfish and non‐gelatinous zooplankton: A case study in the north of the Gulf of Oman

Processes underlying the temporal and spatial variations observed in the distribution of jellyfish and non‐gelatinous zooplankton in the Gulf of Oman are not well understood. This information gap is clearly a major issue in controlling the harmful blooms of jellyfish and non‐gelatinous zooplankton. Samples of jellyfish and non‐gelatinous zooplankton were collected from six stations in Chabahar Bay and three stations in Pozm Bay within four seasons. At each station, environmental variables were also recorded from bottom and surface water. A total of 83 individuals of medusae representing four species of Scyphozoa (i.e., Cyanea nozakii, Chrysaora sp., Pelagia noctiluca, Catostylus tagi) and species of Hydrozoa (i.e., Diphyes sp., Rhacostoma sp., Aequorea spp.) were observed in the study area. A total of 70,727.25 individuals/m^?3 of non‐gelatinous zooplankton dominated by copepods and cladocerans were collected in nine stations within the four seasons. The results of a RELATE analysis yielded no significant association between species composition for jellyfish and non‐gelatinous zooplankton. Among environmental variables, water transparency, nitrite concentration, water depth and temperature were better associated with the total variation in jellyfish species composition than with that of non‐gelatinous zooplankton. Dissolved oxygen, pH, and phosphate concentration were significant environmental variables associated with the variation in the spatial and temporal distribution patterns of non‐gelatinous zooplankton assemblages. Although some jellyfish species (i.e., Rhacostoma sp., Pelagia noctiluca, Catostylus tagi) occur independently of non‐gelatinous zooplankton assemblages, other jellyfish (i.e., Chrysaora sp., Aequorea spp., Cyanea nozakii, Diphyes sp.) are strongly correlated with non‐gelatinous zooplankton assemblages.     

Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems

Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile’s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System (FIS) classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile’s geometrical behavior because piles which had the optimal operational degree of about 5° are more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs.