秩亏自由网平差的一种新解法

提出秩亏自由网平差的一种新解法,只亲知道误差方程系数阵中ｔ０个线性无关的列向量,就能很快地得到最小二乘最小范数解,实际计算表明,这种新解法是简单有效的。     

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

近地铁结构地连墙施工技术可行性分析与应用

随着城市经济建设的飞速发展,城市地下空间开发项目日益增多。工程施工中经常遇到紧邻地下建筑物进行开挖、钻进等情况,特别是地下连续墙这样较大面积深层开挖的工法,势必会对原有地下建筑造成一定影响,稍有不慎,便会造成安全质量事故。结合工程实例,简要介绍了地下连续墙在上海市某紧邻地铁结构基坑工程中的应用。通过可行性分析,采取相关的施工过程控制措施使其在施工过程中对地铁结构的变形影响达到最小,实践证明了该法对同类复杂工程的适应性。     

Prevention of water and quicksand inrush during extracting contiguous coal seams under the lowermost aquifer in the unconsolidated Cenozoic alluvium—a case study

Extracting the contiguous coal seams under the lowermost aquifer in the unconsolidated Cenozoic alluvium is apt to water and quicksand inrush. By using a series of investigation methods including empirical formulas, numerical simulation, theoretical analysis, etc., the study focused on the fracture and the excess pore water pressure in the overlying strata in the process of extracting no. 8 coal seam firstly and no. 9 coal seam (under no. 8 coal seam) subsequently in no. 8102 working face of Luling coal mine in the north of Anhui Province of China. When no. 8 coal seam was extracted, the water-conducting fractured zone penetrated into the lowermost aquifer and rapid dissipation of excess pore water pressure above the gob occurred, accompanied by relatively high seepage hydraulic gradient over the headgate and the tailgate. When no. 9 coal seam was extracted, failure did not obviously extend upwards and the excess pore water pressure decreased slowly and a relatively high seepage hydraulic gradient transferred downwards from the headgate to the tailgate in the inclined profile. The safe water head (H _s) in the lowermost aquifer was confirmed to 15.6 m. Therefore, water and quicksand inrush was avoided effectively in the process of extracting the contiguous coal seams by dewatering, controlling mining height, and laying double resistance nets in the working face.     

政策视角下的粤港澳大湾区空间关联分析与协同发展政策机制优化

文章收集了428份由公共部门发布的粤港澳大湾区协同发展政策,根据政策主体拓扑关系测度城市间的大湾区协同政策供给强度,绘制基于协同发展政策关系的大湾区空间联系格局,结果发现：1）单向惠港惠澳的政策措施是当前主要的政策供给方向;2）政策供给高度集中于公共服务与产业领域;3）区县及以下层级和地方专业部门尚未充分进入大湾区协同发展政策网络;4）港、澳、广、深四大中心城市与大湾区其他主体间的政策关系与空间联系方式各异;5）大湾区城市间的政策联系在都市圈尺度内互动频密,跨都市圈政策联系相对松散。最后,提出以下建议：粤港澳大湾区可进一步加强邻域城市、邻域区县、专业部门间以及广深2个中心城市之间的双向政策联动,统筹对港、对澳政策,使得政策供给进一步适应大湾区的治理结构。     

低频时码信号正交解调技术研究

采用正交叠加和正交采样技术，提出了更大程度上数字化的低频时码信号正交解调的设计方案。同时，分析了这种解调方法的虚假抑制和抗镜像干扰能力。分析表明所论述的解调技术易于实现数字化，且成本低廉，具有一定的实用价值。     

渤海湾周缘高温地热异常特征及深部热结构分析

渤海湾周缘高温地热异常区是华北重要的地热资源区,研究其浅层高温地热异常及深层高温地热结构,是解决中国东部高温地热勘查开发瓶颈的重要基础,对加快构建东部现代能源体系、推进“双碳”目标进程具有重要的科学意义。利用最新的中国大陆岩石圈速度模型USTClitho2.0和航磁资料,在大地热流资料约束下,本文计算了渤海湾周缘浅层与深层高温热结构,结果表明:该区居里面平均深度20.8km,居里温度420℃,中、上地壳高温热结构与居里面起伏形态密切相关。上地壳生热率随深度增大而递减,反映了放射性生热元素向上迁移、在浅层富集的垂向分异特征。Moho面温度在600～800℃之间,岩石圈底界面1300℃等温面深度在66.3～97.5 km之间,平均值为76.8 km。依据USTClitho2.0模型Vp、Vs速度结构,本文修正了前人的地壳分层结构及上地壳生热率,计算了研究区内全部91个大地热流点的壳幔热流比,结果表明:Qc/Q=56.4%、Qm/Q=43.6%, Qc/Q>Qm/Q,显示该区为“热壳”结构。前人认为此区是“冷壳热幔”型热结构,本文的计算结果修正了前人的认识,指出上地壳层热流在地表总热流...     

我国北方新生代玄武岩地下水化学特征及其成因——以河北省张北县为例

为了进一步了解我国北方新生代玄武岩地下水的赋存规律和形成演化机理,以河北省张北县玄武岩地下水为研究对象,在野外采集地下水样、测定水化学和同位素组成的基础上,利用统计分析、离子比例系数、氢氧同位素、反向地球化学模拟等方法,对区内玄武岩地下水的水化学形成机制进行了研究。结果表明:沿地下水径流方向,研究区内玄武岩地下水中多数离子质量浓度呈现增大趋势,补给区的地下水化学类型以HCO₃-Ca·Mg为主,TDS质量浓度多小于500mg/L,排泄区地下水中阴离子以Cl^-和SO₄^2-为主,阳离子以Na⁺为主,TDS质量浓度多大于1 400mg/L;研究区地下水补给来源为当地大气降水;硅铝酸盐、岩盐、硫酸盐的风化溶解是地下水中离子的主要来源;溶滤作用、阳离子交替吸附作用和农业施肥等人类活动影响是控制地下水化学形成的主要作用。     

常州润华环球中心深基坑支护效果分析

常州润华环球中心基坑工程一区开挖深度达18 m,采用钻孔灌注排桩和内支撑作为支护结构。基坑施工过程中对基坑顶部的沉降位移和水平位移进行了监测。基坑工程施工结束后基坑顶部的沉降位移和水平位移达到稳定值（分别为25 mm和40 mm）,整体支护效果显著。但在基坑第三次开挖结束后第二道支撑构筑完成之前,基坑顶部的沉降位移和水平位移速率突然增大,直至第二道支撑构筑完成后增速才缓慢降低。提高第二道支撑的标高有利于降低基坑的变形,提高支护效果。     

广东东莞黑头山花岗岩体成岩时代及成因研究

广东东莞厚街黑头山黑云母二长花岗岩体锆石SHRIMP U-Pb测定其岩浆结晶年龄为151.6 Ma(晚侏罗世),属燕山期岩浆活动产物。岩石化学成分富SiO2(70%),富K2O(4%);相对贫Al2O3(12%~14.4%),贫Sr、Ba、Eu、Ti和P;稀土配分曲线呈海鸥型,具明显的负铕异常。多方法综合判断认为黑头山花岗岩具明显的A型花岗岩特征,属弱过铝质A1型花岗岩,应是燕山期岩石圈拉张减薄构造背景下所形成的侵入岩体。