热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.     

Postcollisional flow of aqueous fluid within ultrahigh-pressure eclogite in the Dabie orogen

A combined study of chronometric dating and oxygen isotope analysis for minerals from vein and host eclogite as well as regional country-rock gneiss in the Dabie orogen provides a direct constraint on timing of fluid flow in this orogen formed by continental collision. Oxygen isotope ratios of vein minerals are significantly lower than those of the host eclogite, but comparable with those of the regional gneiss. This suggests the veining fluid came from the regional gneiss (i.e. exhumed slab itself) rather than the host eclogite. While zircon U–Pb and phengite Ar–Ar dating yields ages of 214 to 222 Ma for the eclogite and gneiss, the vein gives a quartz–muscovite Rb–Sr isochron age of 181 Ma and a muscovite K–Ar age of 179 Ma. Thus the veining postdates the Triassic ultrahigh pressure metamorphic event, witnessing postcollisional fluid flow after the orogenic cycle of continental collision.     

桩锚支挡体系在广西寨-任二级公路高边坡治理工程中的应用

(六)寨-(水)任二级公路施工后,滑坡、坍塌、崩塌现象甚多,边坡治理迫在眉睫。桩锚支挡体系是一项主动性加固边坡技术,具结构轻巧、用材合理、施工简单、工期短、费用低等特点。论文通过其在(六)寨-(水)任二级公路K56段高边坡治理工程中的应用,对桩锚支挡体系的设计及施工要点作了介绍。     

地下导线随盾构推进逐段接测中的可靠性检验

盾构法施工的要点是需要在井下布设高精度的控制支导线，当我们根据盾构推进进度对导线接测时，由于观测条件、观测方法、观测仪器基本相同，但观测、的成果往往会存在一定的差异，有时我们无法直接判断成果的正确与否，此时，采用测量平差中的统计检验的方法来分析这些观测数据，可以取得比较满意的结果。     

亚洲赤道地区大气动能的纬向传播

基于 1980～ 1997年 85 0hPa逐日NCEP/NCAR再分析资料讨论了亚洲赤道地区 (0°～ 5°N)大气动能的纬向传播特征。结果表明 ,在亚洲季风区内 ,赤道地区大气动能 (K)的最强中心位于 75°～ 90°E ,次强中心在索马里急流区 (5 0°E附近 )。在 0°～ 5°N ,90°E以东 ,平均的大气动能扰动和赤道上经向风扰动主要起源于西太平洋 ,并向西经南海传播到孟加拉湾。而在孟加拉湾动能中心与索马里急流区之间 ,动能传播方向比较复杂。以上事实说明赤道地区东亚季风系统确实是存在的 ,与印度季风系统中扰动的传播方向不同 ,东亚季风系统中动能和经向风扰动在东西方向上主要受西太平洋的影响。在亚洲赤道季风区 ,这两个系统的交界处约在 95°～ 10 0°E附近 ,比过去界定的偏西 5～ 10个经度。     

2003年 8月 21-22日辐合气流暴雨天气过程总结

本文综合应用天气图、静止卫星云图、物理量诊断场,分析了 2003年 8月 21～ 22日黑龙江省大范围强降水过程.分析了乌拉尔山阻高、副热带高压和冷暖空气在暴雨天气过程中的作用.得出有预报指示意义的特征.并对日本传真图的降水预报能力进行了检验分析.在暴雨预报中也具有一定的预报意义.     

2004年夏季哈尔滨 5次短时强降水天气过程的对比分析

2004年夏季, 哈尔滨在 40d中发生了 5次短时强降水灾害,城市内涝严重,部分交通干线瘫痪.短时强降水天气多发生于中小尺度天气系统,空间尺度小,生命史短,预报难度大.虽然前人在此方面已做过大量工作,但在干旱的气候背景下,为什么频繁发生短时强降水天气,它们的共同特征是什么？本文从环流条件、卫星云图、多普勒雷达回波以及物理量场进行分析,对上述问题进行了探讨.     

利用生物圈模型 (SiB2) 模拟青藏高原那曲草原近地面层能量收支

模式所需要的参数被合理地设置之后, 根据GAME/ Tibet (GEWEX亚洲季风试验/青藏高原试验) 那曲近地层观测站的资料, 将大气强迫变量代入SiB2(Simple Biosphere model version2), 文章模拟了该观测站地表能量收支。结果表明:SiB2能够较好地模拟青藏高原的能量收支情况, 净辐射、潜热通量和土壤热通量的模拟值和观测值吻合, 它们的相对误差分别为8% (低估)、6% (低估) 和3 %(低估)。同时, SiB2高估感热通量达40%。文章还给出了能量各分量的详细比较分析。     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.