Estimating areal production of intertidal microphytobenthos based on spatio-temporal community dynamics and laboratory measurements

In situ Microphytobenthic community dynamics were combined with laboratory measurement of predominant species by fluorescence methods to estimate the areal primary production. Field investigation of community dynamics of microphytobenthos (MPB) was conducted from August 2006 to August 2007 in intertidal flats of the Nakdong River estuary, Korea. MPB Biomass varied between 0.47 and 16.58 μg cm^?3 in the surface 1 cm sediment, with two dominant diatom species, Amphora coffeaeformis and Navicula sp., occupying average 77.2 ± 14.9% of total number of MPB cells. The biomass was higher in the slightly muddy sand sites than that in the sand site, and showed different pattern of seasonal variation. The profile of vertical distribution of biomass was an exponential decrease trend with depth in sediments. The biomass proportions in the uppermost 3 mm were 57.6% and 37.8% with and without the presence of biofilm, respectively. The two dominant species were cultured in laboratory, and their photosynthetic parameters, rETR_max (relative maximum electron transport rate), α (light utilization coefficient) and E _k (light saturation parameter) were derived from rETR (relative ETR)-irradiance curves by Imaging- PAM (pulse amplitude modulated) fluorometry. The rETR-irradiance curves showed no significant difference of photosynthetic activities between the two species. The areal potential production ranged from 0.74 to 2.22 g C m^?2 d^?1.     

Evaluating the stress intensity factors of anisotropic bimaterials using boundary element method

This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation is only collocated on one side of the crack surface. A fundamental solution (Green's function) for anisotropic bimaterials is also derived and implemented into the boundary integral formulation so that except for the interfacial crack part, the discretization along the interface can be avoided. A special crack‐tip element is introduced to capture the exact crack‐tip behavior. A computer program using FORTRAN has been developed to effectively calculate the stress intensity factors of an anisotropic bimaterial. This BEM program has been verified to have a good accuracy with previous studies. In addition, a central cracked bimaterial Brazilian specimen constituting cement and gypsum is prepared to conduct the Brazilian test under diametral loading. The result shows that the numerical analysis can predict relatively well the direction of crack initiation and the path of crack propagation. Copyright © 2007 John Wiley & Sons, Ltd.     

Effects of flexibility on propulsive force acting on a heaving foil

The hybrid Cartesian/immersed boundary method is applied to simulate effects of flexibility on propulsive force acting on a heaving foil in a viscous flow. Immersed boundary nodes are distributed inside an instantaneous fluid domain. Velocity vector is reconstructed at the immersed boundary node based on an interpolation along a local normal line. Using the staggered/non-staggered grid method, the demand for pressure at boundary nodes is removed. Elastic deformation of the flexible foil is modelled based on the dynamic thin-plate mechanics. The developed code is validated through comparisons with other computations on flow fields around a flapping foil. The generation of the reverse Karman vortex street is investigated. Forces acting on heaving foils are compared for flexible and rigid cases and the increased thrust of the flexible foil is attributed to the deformed configuration near the tip. The flexibility of the heaving foil decreases vertical force and improves propulsion efficiency. The variations of force and deformation are investigated according to bending stiffness of the foil.     

Ex situ echo sounder target strengths of ice krill Euphausia crystallorophias

Ice krill is the keystone species in the neritic ecosystem in the Southern Ocean,where it replaces the more oceanic Antarctic krill. It is essential to understand the variation of target strength(TS in d B re 1 m 2) with the different body size to accurately estimate ice krill stocks. However,there is comparatively little knowledge of the acoustic backscatter of ice krill. The TS of individual,formalin-preserved,tethered ice krill was measured in a freshwater test tank at 38,120,and 200 k Hz with a calibrated split-beam echo sounder system. Mean TS was obtained from 21 individual ice krill with a broad range of body lengths(L :13–36 mm). The length( L,mm) to wet weight( W; mg) relationship for ice krill was W =0.001 218×103 × L 3.53( R 2= 0.96). The mean TS-to-length relationship were TS3 8 k Hz =-177.4+57log 10( L),( R 2 = 0.86); TS 120 k Hz =-129.9+31.56 log 10( L),( R 2 =0.87); and TS 200 k Hz =-117.6+24.66log1 0( L),( R 2 =0.84). Empirical estimates of the relationship between the TS and body length of ice krill were established at 38,120,and 200 k Hz and compared with predictions obtained from both the linear regression model of Greene et al.(1991) and the Stochastic Distorted Wave Born Approximation(SDWBA) model. This result might be applied to improve acoustic detection and density estimation of ice krill in the Southern Ocean. Further comparative studies are needed with in situ target strength including various body lengths of ice krill.     

Multimodel analysis on the response of the AMOC under an increase of radiative forcing and its symmetrical reversal

Climate Dynamics - The response of the Atlantic meridional overturning circulation (AMOC) to an increase of radiative forcing (ramp-up) and a subsequent reversal of radiative forcing (ramp-down) is...     

Bromine cycle in subduction zones through in situ Br monitoring in diamond anvil cells

The geochemical partitioning of bromine between hydrous haplogranitic melts, initially enriched with respect to Br and aqueous fluids, has been continuously monitored in situ during decompression. Experiments were carried out in diamond anvil cells from 890 °C to room temperature and from 1.7 GPa to room pressure, typically from high P, T conditions corresponding to total miscibility (presence of a supercritical fluid). Br contents were measured in aqueous fluids, hydrous melts and supercritical fluids. Partition coefficients of bromine were characterized at pressure and temperature between fluids, hydrous melts and/or glasses, as appropriate: D^Br_fluid/melt = (Br)_fluid/(Br)_melt, ranges from 2.18 to 9.2 ± 0.5 for conditions within the ranges 0.66-1.7 GPa, 590-890 °C; and D^Br_fluid/glass = (Br)_fluid/(Br)_glass ranges from 60 to 375 at room conditions. The results suggest that because high pressure melts and fluids are capable of accepting high concentrations of bromine, this element may be efficiently removed from the slab to the mantle source of arc magmas. We show that Br may be highly concentrated in subduction zone magmas and strongly enriched in subduction-related volcanic gases, because its mobility is strongly correlated with that of water during magma degassing. Furthermore, our experimental results suggest that a non negligible part of Br present in the subducted slab may remain in the down-going slab, being transported toward the transition zone. This indicates that the Br cycle in subduction zones is in fact divided in two related but independent parts: (1) a shallower one where recycled Br may leave the slab with a water and silica-bearing “fluid” leading to enriched arc magmas that return Br to the atmosphere. (2) A deeper cycle where Br may be recycled back to the mantle maybe to the transition zone, where it may be present in high pressure water-rich metasomatic fluids.     

Grain size trend and hydrodynamic condition of tirumalairajan River estuary,east coast of India

The estuary can be considered as environments characterized by high productivity and uncommensurable ecological value. However, marine ecosystems are also subjected to high human pressures that increase their vulnerability. The aim of this work is to analyze grain size trend of sediment due to the action of the main hydrodynamic condition. The spatial distribution patterns of sediments were monitored according to season. The grain-size trend of surficial sediments revealed a dominant sediment transport trend towards the eastern and south eastern part of study area. This study shows that there is an agreement among sediments path ways, hydrodynamic condition and the sediment spatial distribution in the estuarine environment. The agitation by waves is an important sorting mechanism in the study area. The findings are based on the grain size trend and also corroborated by short term observations of the estuarine sediment dynamics and transport during the monsoon, postmonsoon, summer and premonson seasons in Tirumalairajan River estuary.     

Spatio-temporal variations of optical properties of aerosols in East Asia measured by MODIS and relation to the ground-based mass concentrations observed in central Korea during 2001∼2010

Long-term variations and trends of atmospheric aerosols in the East Asian region were analyzed by using aerosol optical depth (AOD or τ), and ångström exponent (AE or α) obtained from the Moderate Resolution Imaging Spectroradiometer (MODIS) from 2001 to 2010. The increased emission of anthropogenic fine aerosols in east China resulted in the high AOD in this region during summer. The steady increasing emission of anthropogenic fine aerosols caused an increasing trend of AOD in east China, and the large-scale transport of sandstorms and smoke plume caused by forest fires affected intense inter-annual variations of AOD in the East Asian region. While in the central part of South Korea, located in the lee side of the East Asian continent, AE tended to rise to a level higher than in east China, the ground-based mass concentrations continued to decline. A noticeable decrease of PM10 mass concentration in spring and winter in central Korea is most likely attributable to decreases in sandstorms in the source region of East Asia. However, the ratio of PM2.5 mass concentration to PM10 increases overall with a high level in summer. Aerosol types were classified into dust, smoke plume, and sulphate by using satellite data over Cheongwon in central Korea. The columnar AOD, with different aerosol types, was compared with the ground-based mass concentrations at Cheongwon, and the relatively high level of the correlations presented between PM2.5 and AOD produced in sulphate. Growth and increases of fine hygroscopic aerosols generated as gas-to-particle conversion particularly in summer contribute to increases of columnar AOD in the East Asian region.