Macrobenthic composition of the southeast continental shelf of India

Macrobenthic faunal composition was studied at six different depth ranges (30–50, 51–75, 76–100, 101–150, 151–175 and >176 m) in five transects (off Karaikkal, Parangipettai, Cuddalore‐SIPCOT, Cheyyur and Chennai) in the continental shelf of southeast coast of India. Eleven diverse taxa were found, comprising 113 species of polychaetes, 14 species of bivalves, 10 species of amphipods and ‘others’ (five tanaids, five crabs, four isopods, three echinoderms, two shrimps, two cnidarians, two fishes and one cephalochordate). Polychaetes were the dominant taxa, constituting 88.5% of the total abundance and 30.7% of the total biomass. The number of species (seven per 0.2 m² at >176 m depth range in Chennai to 46 per 0.2 m² at 30–50 m in Cheyyur), abundance (216 per 0.2 m² at >176 m in Karaikkal to 353 per 0.2 m² at 30–50 m in Cheyyur) and biomass (0.09 g per 0.2 m² at 151–175 m in Karaikkal and 4.6 g per 0.2 m² at 30–50 m in Cheyyur) of macrobenthos decreased with increase in depth. DO decreased gradually from 30 m depth; beyond 150 m, the decrease was pronounced due to the presence of the oxygen minimum zone. Using the distance based linear model (DISTLM), it was found that the environmental variables explained about 73.3% of the total variability in macrofaunal distribution. The heavy metals cobalt and mercury, as well as water pressure (proxy for depth), showed a significant relationship with macrofauna, explaining respectively 9, 7.3 and 7% of the total variability. The contribution of other variables was smaller.     

Evaluation of the intermediate-term periodicities in solar and cosmic ray activities during cycle 23

In this paper we investigate the presence and temporal evolution of galactic cosmic rays (GCRs) time-series and three solar parameters, namely the daily sunspot number, the coronal green line and the 10.7 cm solar radio flux over the period 1996–2003 by the wavelet technique. A number of short- and intermediate-term quasi-periodicities were also detected in both GCR and solar parameters. For the short-term range, we have identified quasi-periods of 16–30 days, 40–55 days, 60–70 days, 80–90 days and 80–100 days. In the case of intermediate range, the significant periods were 120–140 days, 150–170 days, 190–210 days, 240–260 days, ≈1.09 yr. and ≈1.23 yr. The wavelet power spectra show that all the above-mentioned periods are intermittent in nature and occurred in different time-series in different intervals. The result exhibits that the well-known “Rieger period” of (150–160 days) was prominent in both GCR and solar data sets during the ascending phase of cycle 23. Possible reasons behind the observed periods were discussed with the help of previous results and existing numerical models.     

Multi-stage reaction history in different eclogite types from the Pakistan Himalaya and implications for exhumation processes

Metabasites were sampled from rock series of the subducted margin of the Indian Plate, the so-called Higher Himalayan Crystalline, in the Upper Kaghan Valley, Pakistan. These vary from corona dolerites, cropping out around Saif-ul-Muluk in the south, to coesite–eclogite close to the suture zone against rocks of the Kohistan arc in the north. Bulk rock major- and trace- element chemistry reveals essentially a single protolith as the source for five different eclogite types, which differ in fabric, modal mineralogy as well as in mineral chemistry. The study of newly-collected samples reveals coesite (confirmed by in situ Raman spectroscopy) in both garnet and omphacite. All eclogites show growth of amphiboles during exhumation. Within some coesite-bearing eclogites the presence of glaucophane cores to barroisite is noted whereas in most samples porphyroblastic sodic–calcic amphiboles are rimmed by more aluminous calcic amphibole (pargasite, tschermakite, and edenite). Eclogite facies rutile is replaced by ilmenite which itself is commonly surrounded by titanite. In addition, some eclogite bodies show leucocratic segregations containing phengite, quartz, zoisite and/or kyanite. The important implication is that the complex exhumation path shows stages of initial cooling during decompression (formation of glaucophane) followed by reheating: a very similar situation to that reported for the coesite-bearing eclogite series of the Tso Morari massif, India, 450 km to the south-east.     

Estimation of aquifer hydraulic parameters from surface geophysical measurements: a case study of the Upper Cretaceous aquifer, central Sinai, Egypt

The integration of geophysical data with direct hydrogeological measurements can provide a minimally invasive approach to characterize the subsurface at a variety of resolutions and over many spatial scales. The field of hydrogeophysics has attracted much attention during the last two decades. In this domain, the geophysical data inverted to geophysical models are interpreted in terms of the hydrogeology to serve as a basis for the definition of hydraulic models in the areas of interest. The hydraulic conductivity (K) value measured in a reference borehole has been combined with the electrical conductivity obtained from nearby geo-electromagnetic sounding data in the Cenomanian (Upper Cretaceous) aquifer, central Sinai, Egypt. The resulting relation was interpreted with Dar Zarrouk parameters to infer the transmissivity variations at other vertical electrical sounding locations, where K values are unknown. Coincident transient electromagnetic data have been adopted to increase accuracy while interpreting the aquifer geoelectrical properties. The results indicate that the transmissivity values in the aquifer of interest vary from 2,446 to 9,694 m²/day, and K varies from 12.9 to 57.0 m/day throughout the studied area.     

Modelling underground cadastral survey data in CityGML

In underground environments, survey elements such as survey points and observations provide the information required to define legal boundaries. These elements are also used to connect underground legal spaces to a geodetic survey network. Due to the issues of current 2D approaches for managing underground cadastral data, prominent 3D data models have been extended to support underground land administration. However, previous studies mostly focused on defining underground legal spaces and boundaries, with less emphasis on survey elements. This research aims to extend CityGML to support underground cadastral survey data. The proposed extension is based on the survey elements elicited from underground cadastral plans, which is then implemented for an underground case study area in Melbourne, Australia. This extension integrates underground survey data with legal and physical data in a 3D digital environment and provides an improved representation of survey elements, facilitating the management and communication of underground cadastral survey data.     

Prediction of the Caspian Sea level using ECMWF seasonal forecasts and reanalysis

The hydrological budget of the Caspian Sea (CS) is investigated using the European Centre for Medium-Range Weather Forecasts interim reanalysis (ERAi) and seasonal forecast (FCST) data with the aim of predicting the Caspian Sea Level (CSL) some months ahead. Precipitation and evaporation are used. After precipitation events over the Volga River, the discharge (Volga River discharge (VRD)) follows with delays, which are parameterized. The components of the water budget from ERAi and FCSTs are integrated to obtain time series of the CSL. Observations of the CSL and the VRD are used for comparison and tuning. The quality of ERAi data is sufficiently good to calculate the time variability of the CSL with a satisfactory accuracy. Already the storage of water within the Volga Basin allows forecasts of the CSL a few months ahead, and using the FCSTs of precipitation improves the CSL forecasts. The evaporation in the seasonal forecasts is deficient due to unrealistic sea surface temperatures over the CS. Impacts of different water budget terms on the CSL variability are shown by a variety of validation tools. The importance of precipitation anomalies over the catchment of the Volga River is confirmed, but also impacts from the two southern rivers (Sefidrud and Kura River) and the evaporation over the CS become obvious for some periods. When pushing the FCSTs beyond the limits of the seasonal FCSTs to 1 year, considerable forecast skill can still be found. Validating only FCSTs by the present approach, which show the same trend as one based on a statistical method, significantly enhances the skill scores.     

Gravity anomalies,flexure, and deformation of the converging Indian lithosphere in Nepal and Sikkim–Darjeeling Himalayas

Researchers ubiquitously noted that the common processes of partitioning oblique convergence in response to drag from the trench-hanging plate simultaneously produce radial slips, along-strike translation, and extension parallel to the deformation front. Here, we focus on the area between Nepal and Sikkim–Darjeeling Himalayas, and carry out gravity and finite-element stress modeling of the strike-orthogonal converging Indian lithosphere. We delineate the geometries of different layers and their interfaces through gravity modeling. The optimum model parameters along with rheological parameters of different layers are used for finite-element modeling. Finite-element modeling is done with boundary conditions of keeping the upper surface free and rigidly fixing the section of the northern boundary below the Main Himalayan Thrust. We impart on its frontal section an amount of 6 × 10¹² N/m force, equivalent to resistive force of the Himalayan–Tibet system, and analyze the maximum and minimum compressive stress fields evolved in the lithosphere. We testify our observations with earthquake database and other geophysical and geological studies. We note that an increasing flexing of the Indian lithosphere beyond the Main Boundary Thrust becomes maxima between the Main Central Thrust and South Tibetan Detachment in both the areas; however, more steepening of the Moho boundary is identified in the Sikkim–Darjeeling Himalaya. This abrupt change in lithospheric geometry beneath the Greater Himalaya is likely correlated with the sharp elevation changes in the topography. Although the highest seismicity concentration is dominant in this zone, the Lesser and the Tethys Himalayas in Sikkim–Darjeeling area also record relatively fair seismic activity. More compressive stress field in different layers right within the sharp bending zone supports this observation. We thus propose that the sharp bending zone beneath the Greater Himalaya is suffering maximum deformation, and the deformation is continued in the mantle too. We also identify both right-lateral shear and radial vergence slip, which are presumably associated with the general dynamics and kinematics of the Himalaya.     

Optimization of sample preparation method of total sulphur measurement in mine tailings

A sample preparation method of total sulphur measurement of reactive mine tailings was optimized. The total sulphur was measured by inductively coupled plasma optical emission spectroscopy, and ultrasound technique was used for sample digestion. The optimization process was adopted by a combined approach of experimental design and response surface methodology. The digestion time, temperature and acid-oxidant combination (i.e. effect of H₂O₂ with a fixed amount of acid mixture) were investigated. A two-level and three-factor (2³) full factorial design of experiment was applied to identify the most significant factors, and a central composite design was used to optimize the digestion procedure. KZK-1, a sericite schist, was selected as the certified reference material. The optimum methodology at 95 % confidence level (P < 0.05) was identified to be 10 min of digestion at 77 °C, with a solution of 1 ml HNO₃:1 ml HCl:1.35 ml H₂O₂. This combination resulted in 100 % sulphur recovery. The investigated method was verified by X-ray diffraction analysis. The optimum digestion level was applied to a reactive mine tailings, which achieved satisfactory results with a percentage relative standard deviation < 3 %.