Petrogenesis of the mafic igneous rocks of the Betic Cordilleras: A field, petrological and geochemical study

Mafic igneous rocks are widespread in the Nevado-Filábride Complex, the lowermost metamorphic unit of the internal zones of the Betic Cordilleras. They form intrusive, small, discontinuous bodies, predominantly dikes with subordinate small lava flows. The entire complex underwent alpine compressional metamorphism during the Paleogene continental collision, resulting in eclogites and blueschists in the mafic bodies and high-pressure assemblages in the intruded metasediments. Locally, weakly metamorphosed or completely unmetamorphosed igneous rocks with the same textural features occur as patches surrounded by eclogitized igneous rocks. The bulk rock chemistry of unmetamorphosed and completely metamorphosed mafic igneous rocks is consistent with an alkaline to transitional tholeiitic magmatism with typical within-plate geochemical characteristics. All but a few samples are nepheline normative and display REE and trace element characteristics typical of continental, rift-related magmatism. This conclusion is strongly supported by the mineral chemistry of the major constituents, in particular the calcic Ti-rich character of clinopyroxene, the lack of orthopyroxene, and the occurrence of kaersutitic amphibole. Incompatible trace element abundances and Sr and Nd isotopes support the provenance of these magmas from a variably metasomatized previously depleted sub-continental lithospheric mantle source. Received: 5 July 1999 / Accepted: 28 February 2000     

CO2-rich thermomineral groundwater in the Betic Cordilleras, southeastern Spain: Genesis and tectonic implications

The CO₂-rich thermal groundwater in the Betic Cordilleras in Spain has been studied with regard to the geological and hydrogeological setting, physical and chemical characteristics, and ¹³C-isotope content. The study area is about 60 km northeast of Almería city, in southeastern Spain. The thermomineral waters are plentiful and are related to regional geothermal anomalies. Temperatures of 20 −41°C, high bicarbonate concentrations (183–1824 mg/L), and high amounts of PCO₂ (<1.1 bar) characterize the groundwater. CO₂ spatial variations are related to proximity to the Carboneras, Palomares, and Guadalentín fault systems, which may be the surface representation of the zone of crustal thinning and magmatism. δ ¹³C values probably indicate a deep source for the CO₂, either the mantle or perhaps carbonate rocks in the metamorphic substratum. The high amount of CO₂ in the groundwater causes problems in wells and severely restricts water usage. The hydrothermal features of this area are probably related to neotectonic activity. Received, September 1998/Revised, June 1999, September 1999/Accepted, December 1999     

Complex site effects and building codes: Making the leap

The engineering community is aware of the importance of site effects, but it lags behind seismological studies when it comes to incorporating site effect considerations in design spectra for seismic norms. This lag is reflected in the conspicuous fact that current building codes make allowance for 1D site effects but ignore complex site effects. The purpose of this paper is to explore a way for including complex site effects in a building code environment. We take as example Eurocode 8, which is a modern code that exemplifies the current approach to site effect consideration. We examine the restrictions that we have imposed to make the problem of a feasible size and discuss the approach we have taken. We propose a strategy to incorporate a class of complex site effects in a design elastic spectrum.     

About the Efficiency of Numerical 1-D and 2-D Modelling of Site Effects in Basin Structures

—In the present study we compare results obtained from experimental estimates of local site amplification effects with those from numerical modelling using four different techniques. We benefit from an extremely precise knowledge of the near-surface structure and experimental estimates of the local amplification factors which are determined from seismic weak-motion data recorded by a dense array across a sedimentary basin at a European test-site in Northern Greece. The possibilities and limitations of the different modelling techniques (a 1-D technique, and three 2-D techniques) to model the effects of local amplification effects are tested. Amplifications calculated by the numerical techniques are only qualitatively compared with observed data from experimental studies in the time domain and directly in the frequency domain.¶As a result we conclude that, in the case of a complex subsurface geometry, 1-D modelling underestimates the amplification patterns in terms of absolute amplification level, and cannot correctly account for resonant frequencies, at least for modes higher than the fundamental mode. If a more realistic incident wave field than just a plane wave is taken into account, 2-D modelling reveals the fundamental frequency and shows adequate amplifications not only at the fundamental frequency but also at higher frequencies. The general trend of the amplifications at the lowest frequencies is well determined by the 2-D numerical modelling, and can therefore supply information for seismic risk analysis.     

Recent Climate Warming: Surface Air Temperature Series and Geothermal Evidence

Long-term (1961 – 1996) meteorological air temperature series together with the reconstructed ground surface temperature histories, obtained by inverting borehole temperature-depth profiles, were used to project regional patterns of the recent (climate) warming rate on the territory of the Czech Republic. The characteristic magnitude of the warming rate of 0.02 –0.03 K/yr was confirmed by the results of several years of monitoring the temperature in two experimental boreholes. The monitoring of shallow temperatures at depths of about 30 –40 m, i.e. below the reach of the seasonal surface temperature variations, can serve as an alternative tool of direct quantitative assessment of the present warming rate. The data also seem to sustain a potential man-made component contributing to the more pronounced recent warming rate observed in the areas of large agglomeration.     

Contribution of Local Seismic Networks To The Regional Velocity Model of The Bohemian Massif

The routine location of regional seismic events using data from the Czech National Seismological Network (CNSN) is based on Pn, Pg, Sn, Sg phases. A simple velocity model derived from Kárník's (1953) interpretation of an earthquake in Northern Hungary in 1951 has hitherto been used. At present, numerous local seismic networks record and locate local events, which are occasionally recorded at regional distances as well. Due to the relatively small dimensions of local networks, hypocenters (and origin times) determined by a local network might be considered as nearly exact from the point of view of regional-scale CNSN. The comparison of common locations performed by CNSN and by a local network enables us to estimate the accuracy of CNSN locations, as well as to optimize a simple velocity model. The joint interpretation of the CNSN bulletin and the catalogues of four local seismic networks WEBNET, OSTRAVA, KLADNO and LUBIN produced a new ID velocity model. The most frequent epicentral error in this model is less than 5 km, and most foci lie up to 15 km from the true position. The performed analysis indicates bimodal distribution of Sn residuals.     

Tectonics of an extinct ridge-transform intersection,Drake Passage (Antarctica)

New swath bathymetric, multichannel seismic and magnetic data reveal the complexity of the intersection between the extinct West Scotia Ridge (WSR) and the Shackleton Fracture Zone (SFZ), a first-order NW-SE trending high-relief ridge cutting across the Drake Passage. The SFZ is composed of shallow, ridge segments and depressions, largely parallel to the fracture zone with an `en echelon' pattern in plan view. These features are bounded by tectonic lineaments, interpreted as faults. The axial valley of the spreading center intersects the fracture zone in a complex area of deformation, where N120° E lineaments and E–W faults anastomose on both sides of the intersection. The fracture zone developed within an extensional regime, which facilitated the formation of oceanic transverse ridges parallel to the fracture zone and depressions attributed to pull-apart basins, bounded by normal and strike-slip faults.On the multichannel seismic (MCS) profiles, the igneous crust is well stratified, with numerous discontinuous high-amplitude reflectors and many irregular diffractions at the top, and a thicker layer below. The latter has sparse and weak reflectors, although it locally contains strong, dipping reflections. A bright, slightly undulating reflector observed below the spreading center axial valley at about 0.75 s (twt) depth in the igneous crust is interpreted as an indication of the relict axial magma chamber. Deep, high-amplitude subhorizontal and slightly dipping reflections are observed between 1.8 and 3.2 s (twt) below sea floor, but are preferentially located at about 2.8–3.0 s (twt) depth. Where these reflections are more continuous they may represent the Mohorovicic seismic discontinuity. More locally, short (2–3 km long), very high-amplitude reflections observed at 3.6 and 4.3 s (twt) depth below sea floor are attributed to an interlayered upper mantle transition zone. The MCS profiles also show a pattern of regularly spaced, steep-inclined reflectors, which cut across layers 2 and 3 of the oceanic crust. These reflectors are attributed to deformation under a transpressional regime that developed along the SFZ, shortly after spreading ceased at the WSR. Magnetic anomalies 5 to 5 E may be confidently identified on the flanks of the WSR. Our spreading model assumes slow rates (ca. 10–20 mm/yr), with slight asymmetries favoring the southeastern flank between 5C and 5, and the northwestern flank between 5 and extinction. The spreading rate asymmetry means that accretion was slower during formation of the steeper, shallower, southeastern flank than of the northwestern flank.     

Effects of PCBs sorbed to algal paste and sediments on the stress protein response (HSP70 family) in the eastern oyster, Crassostrea virginica.

This study examined the stress protein response (HSP70 family) of reproductively inactive oysters fed 0.7 g algal paste containing 0, 0.35 and 3.5 micrograms polychlorinated biphenyls (PCBs) daily. A second set of treatment groups investigated the combined effect of PCBs and sediments (0.3 g sediments daily per oyster) on HSP70 response. After 8 weeks of PCB exposure, oyster tissues (mantle and gill) were sampled and analyzed for HSP70. Preliminary results did not show a significant effect in HSP70 response in oysters fed PCB sorbed to algal paste, albeit PCBs accumulated up to 1342 ng/g dry weight in the mantle, and up to 180 ng/g dry weight in gill tissues. However, the addition of sediments caused a significant increase in HSP70 levels of gills and mantle, although the mantle was less sensitive to the sediments.     

Environmental monitoring using acetylcholinesterase inhibition in vitro. A case study in two Mexican lagoons.

Cholinesterase inhibition is considered a specific biomarker of exposure and effect for organophosphorous pesticides. Its use for monitoring has been hindered, particularly in tropical countries where organophosphates are widely used for malaria and dengue control, because of the frequent lack of suitable controls. An in vitro technique is proposed as a biochemical method for monitoring pollutant mixtures in sediment toxicity tests. Brain homogenate from the fish Oreochromis niloticus is used as the enzyme source. Optimum incubation time, extraction solvent and effect of crude oil on acetylcholinesterase (AChE) are reported. The method described was used in sediments from two Mexican lagoons, located in an oil extraction area where pesticides are used in agriculture and vector control campaigns. AChE inhibitions from 3 to 21% were found in these lagoons, even in the presence of high concentrations of petroleum.     

A densification mechanism to model the mechanical effect of methane hydrates in sandy sediments

Recent pore-scale observations and geomechanical investigations suggest the lack of true cohesion in methane hydrate-bearing sediments (MHBSs) and propose that their mechanical behavior is governed by kinematic constrictions at pore-scale. This paper presents a constitutive model for MHBS, which does not rely on physical bonding between hydrate crystals and sediment grains but on the densification effect that pore invasion with hydrate has on the sediment mechanical properties. The Hydrate-CASM extends the critical state model Clay and Sand Model (CASM) by implementing the subloading surface model and introducing the densification mechanism. The model suggests that the decrease of the sediment available void volume during hydrate formation stiffens its structure and has a similar mechanical effect as the increase of sediment density. In particular, the model attributes stress-strain changes observed in MHBS to the variations in sediment available void volume with hydrate saturation and its consequent effect on isotropic yield stress and swelling line slope. The model performance is examined against published experimental data from drained triaxial tests performed at different confining stress and with distinct hydrate saturation and morphology. Overall, the simulations capture the influence of hydrate saturation in both the magnitude and trend of the stiffness, shear strength, and volumetric response of synthetic MHBS. The results are validated against those obtained from previous mechanical models for MHBS that examine the same experimental data. The Hydrate-CASM performs similarly to previous models, but its formulation only requires one hydrate-related empirical parameter to express changes in the sediment elastic stiffness with hydrate saturation.