ASO-S卫星HXI量能器探测单元的标定

先进天基太阳天文台卫星(Advanced Space-based Solar Observatory, ASO-S)是中国科学院第2批空间科学先导专项之一,其主要目标是同时观测太阳磁场、耀斑和日冕物质抛射,并对3者之间的相互关系和内在联系进行研究.硬X射线成像仪(HXI)是ASOS卫星的3大载荷之一,它通过对太阳活动发射的硬X射线进行傅里叶调制成像,实现高空间分辨率和高时间分辨率的太阳能谱成像观测.量能器单机是HXI的关键单机之一,其主要任务是精准测量通过每对光栅后太阳硬X射线的能量和通量.主要介绍了量能器单机的工作原理及其关键指标要求、标定设备及标定方案,最后给出了标定结果,从而验证了量能器单机方案设计的合理性.     

硬X射线成像望远镜系统初步研究

介绍了基于傅立叶变换成像技术的硬X射线成像望远镜,利用双层平行光栅对天体X射线源发出的光进行调制编码,调制后的光由闪烁晶体探测器捕捉并进行光电转换,最后由电子学系统读出.调制准直器型望远镜分为空间调制和时间调制两种类型,时间调制系统要求探测器系统的扫描运动,而空间调制系统不需要运动.对光栅制作工艺进行了研究,给出了准直器的基本结构设计,成功制作了空间调制方式硬X射线成像望远镜原型机所需的关键部件,包括8个碘化铯晶体的探测器模块(含光电倍增管PMT)、8通道成型放大器(其中两套为实验备份)和数据获取系统.对这些部件的设计作了介绍,并给出了电子学系统的测试结果.     

空间太阳硬X射线成像仪量能器读出电子学设计

先进天基太阳天文台(ASO-S)是中国科学院空间科学先导专项2期规划的太阳观测卫星,其针对第25个太阳活动峰年,同时观测太阳磁场、日冕物质抛射和太阳耀斑爆发.硬X射线成像仪(HXI)作为该卫星3个科学载荷之一,实现了高时间分辨率和空间分辨率的太阳硬X射线成像观测,其量能器由99套溴化镧闪烁晶体-光电倍增管探测单元和读出电子学板构成,实现了30–200 keV的硬X射线光子能谱测量.针对HXI量能器的观测需求,设计了一套空间高事例率读出电子学系统,并通过实验室测试,证明了该系统单事例读出死时间小于2μs,同时验证了该系统电子学噪声小于120 fC,积分非线性小于2%,满足HXI仪器要求.     

ASO-S/HXI太阳指向镜算法研究

硬X射线成像是研究太阳耀斑等爆发现象的重要手段.由于采用调制成像而非直接成像的原因, X射线图像在日面上的位置需要借助太阳指向镜提供的仪器指向的日面坐标来确定.因此,指向信息对于耀斑定位实现多波段研究,理解太阳耀斑的物理过程具有重要的科学意义.在此对两种太阳指向镜指向信息的获取算法进行了测试.结合太阳指向镜的设计方案,首先利用SDO (Solar Dynamics Observatory)/AIA (Atmospheric Imaging Assembly) 4500?的数据产生测试图像,其次对其进行二值化处理,分别提取日面轮廓和4个边角指定区域面积;最后分别利用最小二乘法和四象限法对太阳中心坐标进行反演.初步结果显示最小二乘法受随机噪声影响小,定位精度相对稳定约为0.25′′,并可提供四象限法解算的初值;后者的精度可以优于0.14′′,但受随机噪声影响较大.两种算法的精度都显著优于硬X射线成像仪(Hard X-ray Imager, HXI)太阳指向镜的设计要求,可为指向数据在将来科学分析中的实际应用提供参考.     

太阳硬X射线成像望远镜模拟研究

调制准直器型太阳硬X射线成像望远镜是目前较为通用的太阳观测设备.空间调制望远镜是基于中心轴不旋转的望远镜,适用于3轴稳定的卫星.针对我国可能的太阳观测计划,给出并比较了两组空间调制望远镜的配置方案,然后利用GEANT4高能物理通用软件模拟实际光子的计数情况,使用MATLAB实现图像重建.比较模拟光子计数得到的重建图与几...     

耀斑日冕硬X射线源观测研究

对于足点被日面边缘遮挡住的耀斑的观测研究是诊断日冕硬X射线辐射的一个重要方法.通过统计分析RHESSI (Reuven Ramaty High-Energy Solar Spectroscopic Imager)卫星观测到的71个此类耀斑硬X射线源发现,前人提出的两类源,即日冕X射线辐射中热辐射与非热辐射源区空间分离较小的源和分离较大的源,在能谱、成像、光变曲线以及GOES持续时间等方面都没有显著的区别,其中辐射区的面积、耀斑总热能以及GOES持续时间与分离距离之间有很好的相关性.这些结果支持近年来提出的一些耀斑统一模型.同时也表明Masuda耀斑只是一类非常特殊的事件,不具有日冕硬X射线辐射的一般特征.     

修正的Neupert效应

Neupert效应的定性描述是耀斑中脉冲分量(硬X射线、微波暴)与渐变分量(软X射线发射)之间存在的因果关系,即耀斑最初的能量是以加速粒子的形式释放,加速的电子在大气传输过程中产生非热硬X射线轫致辐射,并加热大气,耀斑软X射线发射是高能粒子注入大气的响应.根据经典Neupert效应的定量描述,硬X射线发射(表征非热电子注入)结束时软X射线应该立刻达到极大,但以往的观测发现一些耀斑软X射线峰值时间(t2)明显晚于硬X射线结束时间(t1)(τ=t2–t1,τ 0),热与非热辐射之间存在明显的偏离经典Neupert效应的情况.为了研究偏离经典Neupert效应的事件,在2002—2015年间的RHESSI (Reuven Ramaty High Energy Solar Spectroscopic Imager)和GOES (Geostationary Operational Environmental Satellites)耀斑列表中,按照在25–50 keV范围内光变较简单、软X射线有对应发射峰等判据,共选择276个耀斑样本,统计了这些耀斑的τ分布、环长d (用双足点源之间的距离来表征)与τ的关系.结果显示:(1)有227个耀斑τ 0,即有约82%的耀斑偏离经典Neupert效应;(2)τ与d之间存在一定的线性相关,即环越长,软X射线极大的时间越延后;(3)似乎存在一个临界距离,当环长小于临界距离时,经典Neupert效应成立.这些结果印证了修正Neupert效应的必要性,并对其物理意义进行了讨论.     

天宫2号POLAR探测器的低能X射线在轨定标

伽马暴偏振探测仪(POLAR)是天宫2号实验室上搭载的一个γ射线偏振仪,于2016年9月15日搭载在天宫2号进入低轨运行,主要用于探测在50-500 keV能区的硬X射线辐射的线偏振.POLAR由25个模块组成,每个模块有64个塑料闪烁体棒,总计有1600个塑料闪烁体棒,具有较大的有效探测面积和视场.在轨运行期间探测到多个小耀斑,它们的硬X射线光子能量通常小于50 keV,无法直接使用在轨和地面的高能定标结果来进行能谱分析.结合拉马第太阳高能光谱成像探测器(RHESSI)对耀斑SOL2016112907能谱的观测和蒙特卡洛模拟,对耀斑期间被激活的闪烁体棒进行能量低于50 keV的低能相对定标.虽然定标得到的能量阈值(～10 keV)和转换因子相对稳定,但是和高能定标给出的结果相比有显著差异,并且不同闪烁体棒显示出的差异没有明显的规律性.     

太阳耀斑硬X射线观测

这篇报告扼要地叙述了太阳耀斑硬X射线爆发的观测结果,着重介绍时间轮廓、能谱特征、X辐射的偏振以及硬X射线爆发源的位置和结构。全文共分六节,第一节简要地介绍太阳硬X射线爆发的观测史及“太阳峰年”卫星和“火鸟”卫星上的仪器,第二节描述两类太阳硬X射线爆发的特征,第三节描述能谱特征,第四节给出X辐射偏振的观测资料,第五节叙述太阳硬X射线源的位置和结构,最后,在第六节里提出我们对今后从事这项工作的看法。     

平场数据采集间隔对莱曼阿尔法太阳望远镜平场精度的影响分析

莱曼阿尔法太阳望远镜(LST)是先进天基太阳天文台(ASO-S)卫星的载荷之一,它包括白光太阳望远镜(WST),全日面太阳成像仪(SDI)和日冕仪(SCI)等仪器. 1991年Kuhn, Lin和Loranz提出的方法(简称KLL方法)是WST和SDI在轨平场定标的方法之一.为了研究WST和SDI的平场定标精度对KLL方法的相邻位置时间间隔的敏感性,使用太阳动力学观测卫星(SDO)的日震和磁成像仪(HMI)及太阳大气成像仪(AIA)的全日面成像观测数据测试和分析在使用KLL方法时相邻位置时间间隔对所得平场精度的影响.结果显示在LST使用KLL方法进行平场定标时,相邻位置时间间隔越短越好.具体分析表明,WST平场精度对相邻位置采样时间间隔不敏感,而SDI时间间隔需要在240 s范围内.分析结果对卫星姿态调整到稳定所需的时间给出了一定限制.     

Simulations and software development for the Hard X-ray Imager onboard ASO-S

China's first solar mission, the Advanced Space-based Solar Observatory(ASO-S), is now changing from Phase B to Phase C. Its main scientific objectives are summarized as '1M2B', namely magnetic field and two types of bursts(solar flares and coronal mass ejections). Among the three scientific payloads,Hard X-ray Imager(HXI) observes images and spectra of X-ray bursts in solar flares. In this paper, we briefly report on the progresses made by the HXI science team(data and software team) during the design phase(till May 2019). These include simulations of HXI imaging, optimization of HXI grids, development of imaging algorithms, estimation of orbital background, as well as in-orbit calibration plan. These efforts provided guidance for the engineering, improved HXI's imaging capability and reduced the cost of the instrument.     

Design and verification of the HXI collimator on the ASO-S mission

A space-borne hard X-ray collimator, comprising 91 pairs of grids, has been developed for the Hard X-ray Imager(HXI). The HXI is one of the three scientific instruments onboard the first Chinese solar mission: the Advanced Space-based Solar Observatory(ASO-S). The HXI collimator(HXI-C) is a spatial modulation X-ray telescope designed to observe hard X-rays emitted by energetic electrons in solar flares.This paper presents the detailed design of the HXI-C for the qualification model that will be inherited by the flight model. Series tests on the HXI-C qualification model are reported to verify the ability of the HXI-C to survive the launch and to operate normally in on-orbit environments. Furthermore, results of the X-ray beam test for the HXI-C are presented to indirectly identify the working performance of the HXI-C.     

Hard X-ray Imager (HXI) onboard the ASO-S mission

Hard X-ray Imager(HXI) is one of the three scientific instruments onboard the Advanced Spacebased Solar Observatory(ASO-S) mission, which is proposed for the 25th solar maximum by the Chinese solar community. HXI is designed to investigate the non-thermal high-energy electrons accelerated in solar flares by providing images of solar flaring regions in the energy range from 30 keV to 200 keV. The imaging principle of HXI is based on spatially modulated Fourier synthesis and utilizes about 91 sets of bi-grid sub-collimators and corresponding LaBr_3 detectors to obtain Fourier components with a spatial resolution of about 3 arcsec and a time resolution better than 0.5 s. An engineering prototype has been developed and tested to verify the feasibility of design. In this paper, we present background, instrument design and the development and test status of the prototype.     

The Hinode X-Ray Telescope (XRT): Camera Design, Performance and Operations

The X-ray Telescope (XRT) aboard the Hinode satellite is a grazing incidence X-ray imager equipped with a 2048×2048 CCD. The XRT has 1 arcsec pixels with a wide field of view of 34×34 arcmin. It is sensitive to plasmas with a wide temperature range from < 1 to 30 MK, allowing us to obtain TRACE-like low-temperature images as well as Yohkoh/SXT-like high-temperature images. The spacecraft Mission Data Processor (MDP) controls the XRT through sequence tables with versatile autonomous functions such as exposure control, region-of-interest tracking, flare detection, and flare location identification. Data are compressed either with DPCM or JPEG, depending on the purpose. This results in higher cadence and/or wider field of view for a given telemetry bandwidth. With a focus adjust mechanism, a higher resolution of Gaussian focus may be available on-axis. This paper follows the first instrument paper for the XRT (Golub et al., Solar Phys. 243, 63, 2007) and discusses the design and measured performance of the X-ray CCD camera for the XRT and its control system with the MDP.     

The Number of Magnetic Null Points in the Quiet Sun Corona

The coronal magnetic field above a particular photospheric region will vanish at a certain number of points, called null points. These points can be found directly in a potential field extrapolation or their density can be estimated from the Fourier spectrum of the magnetogram. The spectral estimate, in which the extrapolated field is assumed to be random and homogeneous with Gaussian statistics, is found here to be relatively accurate for quiet Sun magnetograms from SOHO’s MDI. The majority of null points occur at low altitudes, and their distribution is dictated by high wavenumbers in the Fourier spectrum. This portion of the spectrum is affected by Poisson noise, and as many as five-sixths of null points identified from a direct extrapolation can be attributed to noise. The null distribution above 1500 km is found to depend on wavelengths that are reliably measured by MDI in either its low-resolution or high-resolution mode. After correcting the spectrum to remove white noise and compensate for the modulation transfer function we find that a potential field extrapolation contains, on average, one magnetic null point, with altitude greater than 1.5 Mm, above every 322 Mm² patch of quiet Sun. Analysis of 562 quiet Sun magnetograms spanning the two latest solar minima shows that the null point density is relatively constant with roughly 10% day-to-day variation. At heights above 1.5 Mm, the null point density decreases approximately as the inverse cube of height. The photospheric field in the quiet Sun is well approximated as that from discrete elements with mean flux 〈|φ|〉=1.0×10¹⁹ Mx distributed randomly with density n=0.007 Mm⁻².     

RHESSI Microflares: I. X-Ray Properties and Multiwavelength Characteristics

We study the general X-ray and multiwavelength characteristics of microflares of GOES class A0.7 to B7.4 (background subtracted) detected by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) on 26 September 2003 comparing them with the properties of regular flares. All the events for which X-ray imaging was feasible originated in one active region and were accumulated in areas with intermixed magnetic polarities. During the events’ rise and peak phase, the RHESSI X-ray spectra show a steep nonthermal power-law component (4?γ?10) for energies ??10 keV. Further evidence for the presence of electron beams is provided by the association with radio type III bursts in 5 out of 11 events where AIP radio spectra were available. The strongest event in our sample shows radio signatures of a type II precursor. The thermally emitting flare plasma observed by RHESSI is found to be hot, 11?T?15 MK, with small emission measures, 10⁴⁶?EM?10⁴⁷ cm^?3, concentrated in the flare loop. In the EUV (TRACE 171 Å), the UV (TRACE 1600 Å) and Kanzelhöhe Solar Observatory Hα, impulsive brightenings at both ends of the RHESSI 3?–?6 keV X-ray loop source are observed, situated in opposite magnetic polarity fields. During the decay phase, a postflare loop at the location of the RHESSI loop source is observed in the TRACE 171 Å? channel showing plasma that is cooled from ??10 MK to ≈?1 MK. Correlations between various thermal and nonthermal parameters derived from the RHESSI microflare spectra compared to the same correlations obtained for a set of small and large flares by Battaglia et al. (Astron. Astrophys. 439, 737, 2005) indicate that the RHESSI instrument gives us a spectrally biased view since it detects only hot (T?10 MK) microflares, and thus the correlations between RHESSI microflare parameters have to be interpreted with caution. The thermal and nonthermal energies derived for the RHESSI microflares are \(\bar{E}_{\mathrm{th}}=7\times 10^{27}\) ergs and \(\bar{E}_{\mathrm{nth}}=2\times 10^{29}\) ergs, respectively. Possible reasons for the order-of-magnitude difference between the thermal and nonthermal microflare energies, which was also found in previous studies, are discussed. The determined event rate of 3.7 h^?1 together with the average microflare energies indicate that the total energy in the observed RHESSI microflares is far too small to account for the heating of the active region corona in which they occur.     

Particle distributions and X-ray spectra in single or multiple solar current sheets

The acceleration of charged particles in a site of magnetic reconnection is analysed by detailed numerical simulations. Single or multiple encounters of the particles with Harris-type reconnecting current sheets (RCSs) are modelled as an overall stochastic process taking place within an active region. RCS physical parameters are selected in a parameter space relevant to solar flares. Initially, the charged particles form a thermal (Maxwellian) distribution corresponding to coronal temperature  ≃2 × 10⁶ K  . Our main goal is to investigate how the acceleration process changes the shape of the particles' kinetic energy distribution. The evolution of the kinetic energy distribution, calculated numerically after one encounter of the particles with a single RCS, is found to be in good agreement with our previously published analytical formulae. In the case of consecutive encounters, we find that the kinetic distribution tends to converge to a practically invariant form after a relatively small number of encounters. We construct a discrete stochastic process that reproduces the numerical distributions and we provide a theoretical interpretation of the asymptotic convergence of the energy distribution. We finally compute the theoretical X-ray spectra that would be emitted by the simulated particles in a thick target model of radiation.