共查询到17条相似文献,搜索用时 93 毫秒
1.
所谓“零基线”检验,就是将两台GPS接收机通过“功率分配器”连接到同一副GPS接收机天线上,并进行差分定位测量。在这个特殊的检验配置情况下,每一台接收机将接收到来自同一天线的完全相同的GPS信号。当进行差分定位解算时,将抑制大气传播影响、轨道误差、多路径效应和天线的缺陷.如此,两台GPS接收机之间的任何电性能的差异,便能得到完全的检验.我们给出了4台Trimble 4000 SST GPS接收机“零基线检验”的一些结果,提出了看法。 相似文献
2.
利用双频GPS接收机中的双频相位来监测伪距观测中的多路径效应,给出P码伪距、C/A码伪距中多路径效应的实例,及AS开放时AS对多路径效应的影响。 相似文献
3.
4.
5.
关于GPS测时精度与共视问题 总被引:2,自引:2,他引:0
讨论并澄清实际工作中发现的一些问题和模糊认识,这些问题涉及GPS在时间比对方面的方法、精度、国际GPS共视观测的意义.文章分析了GPS接收机时间比对中可能出现的问题及其影响。 相似文献
6.
一种提高车载单频GPS实时定位精度的方法 总被引:1,自引:1,他引:0
民用单频GPS接收机实时定位精度约为 1 0 0m。将民用单频GPS接收机装载到汽车上进行导航工作 ,如不用差分等方法 ,则其实时定位精度也只能为 1 0 0m。假设在车上另加测向测距装置 ,以此为基础 ,提出一种提高车载单频GPS接收机实时定位精度的算法。 相似文献
7.
8.
9.
10.
双频GPS接收机天线相位中心的测定 总被引:1,自引:0,他引:1
GPS接收机天线的相位中心,与厂家所确定的位置有偏差,在高精度定位测量中,是不容忽视的。讨论了用“旋转天线法”绘制GPS接收天线的相对相位方向图,来确定天线相位中心的原理方法.使用这种方法,天线相位中心位置的测定精度为1.5mm左右. 相似文献
11.
采用通过中国科学院国家授时中心(NTSC)GPS单、双频这2类观测设备得到的实测数据,进行了NTSC—PTB(physikalisch-technische bundesanstalt(Germary))链路的全视法比对计算和分析。利用这2类设备得到的GPS AV(全视)的结果与BIPM公布的AV方法的A类不确定度一致,从而确定国家授时中心的2类GPS观测设备的性能达到了国际同类水平。如果对双频观测设备时延校准后,采用P3类型进行比对,有望将NTSC现有的比对精度提高50%。 相似文献
12.
高精度国际时间比对的进展 总被引:12,自引:0,他引:12
在过去的45yr中原子频标的性能大约每7yr提高一个数量级,从国际标准时间和各国高精度守时的需要出发,远距离的高精度时间频率传递比对技术也有与之相适应的很大的发展。GPS卫星在近20yr中不仅成为导航定位不可缺少的工具,在时间、频率的方面也发挥出巨大威力;近年来多通道“全视接收”技术的发展钎时频传输比对的稳定性有了重大改善;GLONASS卫星系统在高精度时间比对方面正在成为GPS系统的重要补充手段 相似文献
13.
用于JATC远程时间比对的双频GPS接收机 总被引:1,自引:1,他引:0
中国科学院国家授时中心为“我国综合原子时(JATC)建立与保持的研究”项目研制的双频多通道GPS时间传递接收机NTSCGPS-2,不仅具有远程时间比对的功能,还增加了我国综合原子时需要的本地钟比对功能和精密定位功能。在不增加其它比对设备的情况下,满足JATC项目对远程时间比对的要求。NTSCGPS-2具有如下性能特点:(1)采用双频观测,可实测电离层时延;(2)远程(西安-上海、西安-澳门)时间比对精度达到2ns;(3)具有本地钟间的比对功能,在正常共视观测的同时,还可进行2个本地钟间的比对;(4)具有精密定位功能,相对定位精度为5cm。 相似文献
14.
15.
A. Kontogeorgos P. Tsitsipis C. Caroubalos X. Moussas P. Preka-Papadema A. Hilaris V. Petoussis C. Bouratzis J.-L. Bougeret C. E. Alissandrakis G. Dumas 《Experimental Astronomy》2006,21(1):41-55
We present the improved solar radio spectrograph of the University of Athens operating at the Thermopylae Satellite Telecommunication
Station. Observations now cover the frequency range from 20 to 650 MHz. The spectrograph has a 7-meter moving parabola fed
by a log-periodic antenna for 100–650 MHz and a stationary inverted V fat dipole antenna for the 20–100 MHz range. Two receivers
are operating in parallel, one swept frequency for the whole range (10 spectrums/sec, 630 channels/spectrum) and one acousto-optical
receiver for the range 270 to 450 MHz (100 spectrums/sec, 128 channels/spectrum). The data acquisition system consists of
two PCs (equipped with 12 bit, 225 ksamples/sec ADC, one for each receiver). Sensitivity is about 3 SFU and 30 SFU in the
20–100 MHz and 100–650 MHz range respectively. The daily operation is fully automated: receiving universal time from a GPS,
pointing the antenna to the sun, system calibration, starting and stopping the observations at preset times, data acquisition,
and archiving on DVD. We can also control the whole system through modem or Internet. The instrument can be used either by
itself or in conjunction with other instruments to study the onset and evolution of solar radio bursts and associated interplanetary
phenomena. 相似文献
16.
在采用GPS进行共视时问比对过程中,当两站位置相隔不大长(小于1000km)时,由于卫星轨道误差、电离层和对流层延迟修正的误差可减少至只有几纳秒,可以主为接收天线位置的误差是其主要误差来源.利用GPS本身的时间比对数据,不必增加别的数据来源和设备,采用相对定位的方法可提高定位精度,从而提高时间比对的精度.本文利用日本(CRL)和北京天文台(BAO)之间五天的共视时间比对数据,对(BAO)的天线坐标进行修正.在水平方向和高程方向的修正偏差分别为2.9m和5.6m.如果试验数据足够,修正64效果会更好. 相似文献
17.
A general analysis of phased array noise properties and measurements, applied to one square meter tiles of the Thousand Element Array (THEA), has resulted in a procedure to define the noise budget for a THEA-tile (Woestenburg and Dijkstra, 2003). The THEA system temperature includes LNA and receiver noise, antenna connecting loss, noise coupling between antenna elements and other possible contributions. This paper discusses the various noise contributions to the THEA system temperature and identifies the areas where improvement can be realized. We will present better understanding of the individual noise contributions using measurements and analysis of single antenna/receiver elements. An improved design for a 1-m2 Low Noise Tile (LNT) will be discussed and optimized low noise performance for the LNT is presented. We will also give future perspectives of the noise performance for such tiles, in relation to the requirements for SKA in the 1 GHz frequency range. 相似文献