Transverse fault zones of subtle geomorphic signature in northern Evia island (central Greece extensional province): An introduction to the Quaternary Nileas graben

Reconnaissance level geomorphological observations in the northern part of Evia (Euboea) Island, suggest that a major topographic feature, the 17 km long and 15 km wide Nileas depression (NDpr), corresponds to a previously undetected graben structure, bounded by fault zones of ENE–WSW to NE–SW general strike. These fault zones have been active in the Quaternary, since they affect the Neogene deposits of the Limni–Histiaia basin. They strike transverse to the NW–SE active fault zones that bound northern Evia in the specific area and are characterised along most of their length by subtle geomorphic signatures in areas of extensive forest cover and poor exposure.The NDpr was formed during the Early–Middle Quaternary, after the deposition of the Neogene basin fill. During the Middle–Late Quaternary, the NW–SE fault zones that bound northern Evia have been the main active structures, truncating and uplifting the NDpr to a perched position in relation to the northern Gulf of Evia graben and the submarine basin on the Aegean side of the island. The present-day morphology of the NDpr, with an interior (floor) comprised of Middle Pleistocene erosional surfaces extensively dissected by drainages, was shaped by erosion during this uplift. Judging from their geomorphic signatures, the fault zones that bound the NDpr must have been characterised by low or very low rates of activity during the Late Quaternary. Yet, that they may still be accommodating strain today is suggested by moderate earthquakes that have been recorded within the NDpr.The fault zone at the SE flank of the NDpr (Prokopi–Pelion fault zone) may be very important in terms of earthquake segmentation of the active NW–SE Dirfys fault zone that controls the Aegean coast of northern Evia, given that the intersection between the two presents striking morpho-structural similarities with the intersection of two fault zones with the same directions on the mainland (the Atalanti and Hyampolis fault zones), which is known to have acted as a barrier to the propagation of the Atalanti earthquake ruptures in 1894.     

A new interpretation of terraces in the Taranto Gulf: the role of extensional faulting

The Taranto Gulf of southern Italy provides an excellent case where it is possible to document the importance of normal faults in displacing terraced deposits. The study area is located at the front of the southern Apennines, that is a fold-and-thrust belt developed following the closure of the Mesozoic Tethys Ocean, and the deformation of the Adriatic passive margin during Tertiary and Quaternary times. The outer, eastern parts of the belt were structured in Quaternary, i.e. up to Middle Pleistocene times.The front of the chain is partially sealed by Pliocene–Pleistocene foredeep deposits, which represent the infill of the Bradanic Trough. The upper portion of the middle Pleistocene succession consists of marine sands and conglomerates that in the previous literature have been arranged in several orders of terraces. Analysis of aerial photographs and geomorphological mapping has shown the occurrence of prominent geomorphic lineaments, which appear to control the local drainage pattern. Some of these structures coincide with the map trace of normal faults that produce vertical offsets of the marine terrace surfaces in the order of ca. 10 m each. Many of the fault escarpments reduce their elevation and terminate laterally. In other cases fault escarpments are laterally continuous and can be traced for up to 3–4 km. Scarp height is between 2 and 10 m. Their mean trend ranges from NNE–SSW to ENE–WSW and defines an arcuate pattern that mimics the present coastline.An accurate geomorphological, sedimentological and stratigraphic analysis has been carried out in a selected area of the Bradanic Trough (Pisticci transect) to investigate in detail the relationships between normal faults and the development of the terraces. This analysis allowed us to recognise five facies associations related to the upper and lower beachface and to the neritic clays which represent the substratum of the terraces. More importantly, we observed that all the terraced deposits in the Pisticci transect could be referred to a single sedimentary body displaced by faults. The terraced deposits are related to an event of beach progradation, of Middle Pleistocene age, which has been documented in other areas of the Italian peninsula. These results outline an intimate relationship between the arcuate trend of the recognised fault set and the present coastline pattern. The development of the normal faults can be related to large-scale gravitational processes developed after the general tilting towards the SE of the Bradanic Trough.     

Geomorphic appraisals of active tectonics associated with uplift of the Gohpur–Ganga section in Itanagar, Arunachal Pradesh, India

The Gohpur–Ganga section is located southwest of Itanagar, India. The study area and its adjacent regions lie between the Main Boundary Thrust (MBT) and the Himalayan Front Fault (HFF) within the Sub-Himalaya of the Eastern Himalaya. The Senkhi stream, draining from the north, passes through the MBT and exhibits local meandering as it approaches the study area. Here, five levels of terraces are observed on the eastern part, whereas only four levels of terraces are observed on the western part. The Senkhi and Dokhoso streams show unpaired terraces consisting of very poorly sorted riverbed materials lacking stratification, indicating tectonic activity during deposition. Crude imbrications are also observed on the terrace deposits. A wind gap from an earlier active channel is observed at latitude 27°04′42.4″ N and longitude 93°35′22.4″ E at the height of about 35 m from the present active channel of Senkhi stream. Linear arrangements of ponds trending northeast–southwest on the western side of the study section may represent the paleochannel of Dokhoso stream meeting the Senkhi stream abruptly through this gap earlier. Major lineament trends are observed along NNE–SSW, NE–SW and ENE–WSW direction. The Gohpur–Ganga section is on Quaternary deposits, resting over the Siwaliks with angular contact. Climatic changes of Pleistocene–Holocene times seem to have affected the sedimentation pattern of this part of the Sub-Himalaya, in association with proximal tectonism associated with active tectonic activities, which uplifted the Quaternary deposits. Older and younger terrace deposits seem to mark the Pleistocene–Holocene boundary in the study area with the older terraces showing a well-oxidized and semi-consolidated nature compared to the unoxidized nature of the younger terraces.     

Late Pleistocene tectonic-geomorphological development within a passive margin — The Cariatá trough, northeastern Brazil

Studies on the geomorphological evolution of the South American passive margin have been based on the pediplanation model, which predicts that its morphology is a response to regional uniform uplift and concomitant development of erosion surfaces. We combined remote sensing, geological mapping, lithostratigraphic and facies analyses, and luminescence dating in the Cariatá trough, northeastern Brazil, in order to determine how brittle tectonics and climate influenced colluviation and the shaping of local landforms in the Quaternary. Our work indicates that Cariatá is an asymmetrical trough  40 km long,  25 km wide, 250–550 m deep, and delimited by ENE–WSW-trending faults to the north and south. We recognized an ENE–WSW-oriented compression related to a strike-slip faulting regime, which corresponds to the present-day stress field in the region. This faulting event led to the deposition of colluvial fans, shed from adjacent uplifted crustal blocks, in a tectonically controlled depression. The colluvial succession is  45 m thick and presents two facies assemblages that filled the southern and, in particular, the northern borders of the trough: non-cohesive debrisflow and mudflow deposits. Optically stimulated luminescence dates of the sedimentary infill yielded ages at 224–128 ka and 45–28 ka, dominated by debrisflow and mudflow deposits, respectively. These ages may be over-estimated due to poor bleaching of colluvium, but they and our field data suggest that the margins of the trough were tectonically uplifted and eroded twice in the Late Pleistocene. The spasmodic colluvial accretion reflects the occurrence of high-magnitude, low-recurrence episodes probably associated with climate shifts in a semi-arid hillslope system. It follows that the present-day low-lying piedmont in which the Cariatá trough occurs is a juxtaposition of surfaces of various ages. This trough may have counterparts across the region. These conclusions do not corroborate the application of the cyclical pediplanation hypothesis in the area.     

High-altitude Plio–Quaternary fluvial deposits and their implication on the tilt of a horst, western Anatolia, Turkey

This study investigates the origin and regional tectonic implications of high-altitude Plio (?)–Quaternary fluvial deposits developed over the Bozdağ horst which is an important structural element within the horst–graben system of western Anatolia, Turkey.A total of 23 deposits occur near the modern drainage divide comprising fluvial to occasionally lacustrine deposits. The deposits are all elongated in N–S direction with a width / length ratio of 1 / 10. The largest of them is of 13 km in length with a maximum observable thickness of about 100–110 m. Morphological, lithological, deformational characteristics of these deposits and the drainage system of the area all suggest that the deposits were formed due to uplift and southward tilting of the Bozdağ horst. This tilting which is estimated as 1.2° to 2.2° caused accumulation of the stream load along channels flowing from south to north. All the deposits were later dissected by the same streams with the exception of one deposit which still preserves its original lake form. These deposits are of Quaternary age, which corresponds to the latest N–S directed extensional tectonic phase in the region.     

Influence of structural framework on mountain slope deformation in the Maiella anticline (Central Apennines, Italy)

Relationships between tectonic framework and gravity-driven phenomena have been investigated in an area of the Central Apennines (Italy) characterised by high relief. The north–south, half-dome shaped Maiella anticline lies in the easternmost part of the Apennine fold-and-thrust belt. Its backlimb is bordered by the Caramanico Fault, a normal fault with a maximum downthrown of about 3.5 km that separates the western slope of the Maiella Massif from the Caramanico Valley. The southwestern Maiella area is affected by deep-seated gravitational slope deformation indicated by major double crest lines, down-hill and up-hill facing scarps, a pattern of crossing trenches, bulging at the base of slopes and the presence of different types of landslide and talus slope deposits.The onset and development of deep-seated gravitational slope deformations and the location of Quaternary, massive rockslope failures have been strongly influenced by the structural framework and tectonic pattern of the anticline. Deep-seated gravitational slope deformation at Mt. Macellaro–Mt. Amaro ridge has developed along the Maiella western, reverse slope in correspondence with the anticline axial culmination; it is bordered at the rear by a NNW–SSE oriented, dextral, strike-slip fault zone and has an E–W direction of rock mass deformation. Closer to the southern plunging area of the anticline, gravity-driven phenomena show instead a N–S and NW–SE direction, influenced by bedding attitude.3D topographic models illustrate the relationship between deep-seated gravitational slope deformation and massive rockslope failures. The Campo di Giove rock avalanche, a huge Quaternary failure event, was the result of an instantaneous collapse on a mountaine slope affected by a long-term gravity-driven deformation.     

Cenozoic tectonic activity in a Variscan basement: Evidence from geomorphological markers and structural mapping (NW Iberian Massif)

The NW Iberian Massif is part of an ancient basement that has been considered a seismically stable area with no outstanding Cenozoic tectonics. However, recent seismic activity revealed the need for better knowledge of the Cenozoic structures in the area. Because of the lack of Mesozoic deposits and the scarcity of Cenozoic sediments, as well as the intense deformation of the Pre-Mesozoic Variscan basement, it is difficult to study the Cenozoic tectonic structures. In this work, the combination of detailed structural mapping and study of geomorphological markers in the Variscan basement has allowed recognition of Cenozoic tectonic structures, kinematics and processes that otherwise would not have been identified. The identified structures have been gathered into three groups: a) NE–SW-trending strike-slip faults, mainly sinistral, b) NNW-vergent thrusts that uplift the Caurel Mountains and Galaico-Leoneses Mountains, and c) E–W and ENE–WSW thrusts that uplift the Ancares Mountains in a pop-up structure. The structures cut the Pre-Cenozoic erosion surface and affect the drainage network that shows patterns characteristic of tectonic activity. The three groups of structures define sectors with different relief showing a strong link between geomorphological elements and tectonic structures. The intense drainage reorganisations observed in the area and the deformation of Miocene–Pliocene deposits, point out to a significant Late Miocene tectonic activity in the region. Thus, the Cenozoic tectonic activity in the northwest of the Iberian Peninsula takes place during an extensive period of time which started with the episodes of compression in the Cantabrian Margin and it is identified nowadays by the recent seismic activity recorded in the north-western Iberian Peninsula (1995 and 1997 Lugo events). The seismicity is related to the Cenozoic structures identified in the area, which move under the present SE–NW horizontal maximum compression and coincide with the proposed seismogenic faults.     

Re-exposed basement landforms in the Disko region, West Greenland — disregarded data for estimation of glacial erosion and uplift modelling

Classifications of large-scale landscapes in Greenland have traditionally been based on type and intensity of glacial erosion, with the general idea that present landforms are mainly the result of erosion from ice sheets and glaciers. However, on southern Disko and in areas offshore in Disko Bugt, a basement surface has preserved remnants of weathered gneiss and pre-Paleocene landforms, recently exhumed from Paleocene basalt. Isolated hills and lineaments have been mapped in a digital terrain model and aerial photographs. Offshore have hills been mapped from seismic lines. The medium size bedrock forms on southern Disko as tors, clefts and roche moutonées have been studied in the field. Remnant saprolites were inventoried, sampled and analysed according to grain size and clay mineralogy. The basement surface retains saprolites up to 8 m thick in close relation to the cover rocks. The landforms in the basement rocks belong essentially to an etched surface only slightly remodelled by glacial erosion and, below the highest coastline, also by wave action. The outline of hills is governed by two lineament directions, ENE–WSW representing the schistocity of the gneiss and NW–SE fracture zones. These structures are thus interpreted to have been exploited by the deep weathering while the frequent N–S lineaments have not and thus might be younger. Main ice-flow has been from the NE and has resulted in plucking of SW facing lee sides, however the resulting bedrock forms are mainly controlled by structures and orientation of joints. The identification of re-exposed sub-Paleocene etch forms on Disko and the hills of similar size offshore, forming a hilly relief, have implications for identification of a hilly relief south of Disko Bugt, its relation to younger planation surfaces as well as for conclusions of uplift events.     

Late Quaternary geomorphic evolution of the lower Narmada valley, Western India: implications for neotectonic activity along the Narmada–Son Fault

Geomorphic data combined with stratigraphic studies provide significant information to constrain timing and amount of fault movement. The lower Narmada valley lies astride the Narmada–Son Fault (NSF), an important ENE–WSW-trending tectonic element responsible for the current intraplate seismicity being experienced in the central part of the Indian plate. Varying nature and degree of tectonic movements along the NSF during Late Pleistocene and Holocene have produced four geomorphic surfaces in the lower Narmada valley: the alluvial plain (S₁), ravine surface (S₂), a gravelly fan surface (S₃) and the valley fill terrace surface (S₄). Two major phases of tectonic movements in a compressive stress regime are recorded along the NSF: slow synsedimentary subsidence of the basin during Late Pleistocene due to differential movement, followed by inversion of the basin during the Holocene marked by differential uplift along the NSF. The study suggests that the inversion of the basin is in response to the significant increase in the intensity of compressive stresses in the Indian plate mainly during the Early Holocene. The present incisive drainage and recent seismic activity indicate that the compressive stresses continue to accumulate along the NSF due to continued northward movement of the Indian plate.     

Late Quaternary activity of faults and recurrence interval of earthquakes in the eastern Hokuriku region, northern central Japan, on the basis of precise cryptotephra analysis of fluvial terrace sequences

About 2000 active faults are known to exist within the land area of Japan. Most of these active faults have deformed the topographic surfaces which were formed in the late Quaternary, including fluvial terraces; and the formative ages of these terraces are estimated mainly by tephrochronology. Fluvial terraces in the eastern Hokuriku region, comprising the Toyama, Tonami, and Kanazawa Plains, northern central Japan, are widely distributed and have been deformed by reverse active faults. The formative age of terraces in this area has not been reported, as volcanic ash deposits are rarely visible within terrace deposits and the overlying loamy soil, and outcrops of fluvial terraces are quite scarce in this area. In the present study, we carried out a drilling survey on these terraces to obtain samples of the overlying loamy soil and upper part of terrace deposits. From these samples, we extracted some well-known widespread volcanic ash, from which we were able to estimate the approximate age of the terraces and the vertical slip rate of the active faults. Late Quaternary fluvial terraces in eastern Hokuriku are divided into 12 levels: Terraces 1 to 12 in descending order. Widespread tephras such as the Kikai-Tozurahara Tephra (K-Tz: 95 ka) are contained in the lowest part of the loamy soil in Terrace 4 and the Daisen-Kurayoshi Pumice (DKP: 55 ka) is present in the lowest part of the loamy soil in Terrace 6. From the ages and the vertical displacements of the fluvial terraces, the late Quaternary average vertical slip rates of active faults in eastern Hokuriku are estimated to be 0.2–0.9 mm/year (Uozu fault), 0.1–0.4 mm/year (Kurehayama fault), 0.1–0.3 mm/year (Takashozu fault), 0.1–0.4 mm/year (Hohrinji fault), and 0.5–0.8 mm/year (Morimoto-Togashi fault). We also estimated the recurrence interval of earthquakes related to active faults from displacement per event and ages of terraces and no significant difference in vertical displacement per single earthquake for different active faults, and recurrence intervals tend to be inversely proportional to vertical displacement rates. This study demonstrates that a combination of drilling of loamy soil and precise cryptotephra analysis of fluvial terraces can be used to estimate the formative age of the terraces and the average slip rate of active faults in areas where volcanic ash deposits are rare.     

Morphologic evidence of active motion of the Zambapala Fault, Gulf of Guayaquil (Ecuador)

The Zambapala Fault Zone (ZFZ) is located at the link between the offshore structures of the Gulf of Guayaquil and the Guayaquil Caracas Megashear (GCM) that accommodates the northeastward motion of the North Andean Block. We use morphological observations of drainage offset to assess the active motion of the Zambapala Fault. The relation between the horizontal offset amount D of the stream channel and the upstream length L from the offset segment, and offset of beach morphology provide a measurement of the average slip rate of the motion of the fault to an accuracy of a fraction of millimeters per year. The drainage network is short, running down the southeastern slopes of the Zambapala Cordillera (297 m), a Quaternary dome uplifted along a positive flower structure. We measure the D (drainage offset along the fault)/L (drainage length from the fault) relation for the upper and more recent part of the drainage network. The relation suggests that the fault is active at present. Capture occurs along the middle slopes and channel straightening near the littoral plain, hiding part or most of the fault offset. The fault trace crosses the littoral plain, showing 35–40 m offset of the inner beach ridge, and delimiting variations of the beach morphology. The attribution of a maximum age of 5000–6000 years to the oldest beach ridge (the postglacial transgression) allows us to calculate a minimal mean slip rate of 5.8–8 mm year⁻¹. This result confirms that the Guayaquil Caracas Megashear extends to the Gulf of Guayaquil through the Zambapala Fault Zone, which accommodate at least 60–80% of the slip motion of the Guayaquil Carcas Megashear.     

Quaternary sediments in the Dien Bien Phu fault zone, NW Vietnam: a record of young tectonic processes in the light of OSL-SAR dating results

The Dien Bien Phu fault zone (DBP), orientated NNE to N, is one of the most seismically active zones in Indochina. In NW Vietnam, this zone is 160 km long and 6–10 km wide, cutting sedimentary and metamorphic rocks of the Late Proterozoic, Palaeozoic and Mesozoic age, as well as Palaeozoic and Late Triassic granitoids. Along the DBP relatively small, narrow pull-apart basins occur, the three largest of which (Chan Nua, Lai Chau and Dien Bien Phu) have been studied in detail. All of them are bounded by sinistral and sinistral-normal faults, responsible for offset and deflected drainage, presence of numerous shutter ridges and displaced terraces and alluvial fans. The normal component of motion is testified to by well-preserved triangular facets on fault scarps, highly elevated straths in river watergaps, overhanging tributary valleys, as well as high and uneven river-bed gradients.Our observations indicate a minimum recent sinistral offset ranging from 6–8 to 150 m for Holocene valleys to 1.2–9.75 km for middle–late Pleistocene valleys in different fault segments. The thickness of Quaternary sediments varies from 5–25 m in the Lai Chau area to some 130 m in the Dien Bien Phu Basin. In the Lai Chau Basin, the middle terrace (23 m) alluvia of Nam Na River at Muong Te bridge have been optically stimulated luminescence/single aliquot regenerative dose technique (OSL-SAR) dated at 23–40 to 13 ka. These sediments were normal-faulted by some 11 m after 13 ka, and mantled by vari-coloured slope loams, 8–12 m thick, containing colluvial wedges composed of angular debris. These wedges were probably formed due to at least three palaeoseismic events postdating 6 ka. In the Dien Bien Phu Basin, in turn, alluvium of the upper Holocene terraces has been OSL-SAR dated to 6.5–7 and 1.7–1.0 ka, whereas the younger (sub-recent) terrace sediments give ages of 0.5–0.2 ka.Displaced terraces and alluvial fans allow us to suppose that the sinistral and sinistral-normal faults bounding narrow pull-apart basins in the southern portion of the DBP fault reveal minimum rates of left-lateral strike-slip ranging from 0.6 to 2 mm/year in Holocene and 0.5–3.8 mm/year in Pleistocene times, whereas rates of Holocene uplift tend to attain 1 mm/year north of Lai Chau and 0.4–0.6 mm/year west of Dien Bien Phu. More precise estimations, however, are difficult to obtain due to poor age control of the displaced drainage. Rates of Quaternary strike-slip are comparable with those of the Red River fault; the sense of movement being, however, opposite. Taking into account the presence of two phases of Late Cenozoic strike-slip of contrasting sense of motion, as well as the geometry of the two fault zones, we hypothesize that the Red River and Dien Bien Phu faults are conjugate faults capable of generating relatively strong earthquakes in the future.     

Geomorphological and sedimentological features in Quaternary fluvial systems affected by solution-induced subsidence (Ebro Basin, NE-Spain)

The Quaternary evolution and the morpho-sedimentary features of some of the most important rivers in Spain (Ebro and Tagus rivers among others) have been controlled by subsidence due to alluvial karstification of the evaporitic bedrock. The subsidence mechanism may range from catastrophic collapse to slow sagging of the alluvium by passive bending. In the Ebro Basin, the mechanisms and processes involved in karstic subsidence were studied through the analysis of present-day closed depressions as well as through old subsidence depressions (palaeocollapses and solution-induced basins) and associated deformations recorded in the Quaternary alluvial sediments. The Gállego–Ebro river system is presented as a case study of channel adjustments and geomorphic and sedimentary evolution of fluvial systems in dissolution-induced subsidence areas. In this fluvial system, evaporite dissolution during particular Quaternary time intervals (namely early and middle Pleistocene) have lead to the development of a solution-induced basin, approximately 30 km-long by 8 km-wide, filled by Quaternary deposits with a total thickness in excess of 190 m. The main river response to balance the subsidence in the alluvial plain was aggradation in the central reach of the subsiding area, and degradation both in the upstream reach and in the valley sides where alluvial fans and covered pediments may prograde over the fluvial sediments. The main sinking areas are recognized in the sedimentary record by anomalous thickenings in the alluvial deposits and fine-grained sediments deposited in backswamp and ponded areas.     

Tectonic geomorphology of the Ash Hill fault, Panamint Valley, California

ABSTRACT
Panamint Valley, in eastern California, is an extensional basin currently bounded by active, dextral-normal oblique-slip faults. There is considerable debate over the tectonic and topographic evolution of the valley. The least-studied structure, the Ash Hill fault, runs for some 50 km along the valley's western edge, and active strands of the fault continue south into the neighbouring Slate Range. Vertical displacement on the fault is valley-side up, creating topography that conflicts with the gross morphology of the valley itself. We use this topography, along with kinematic and geological markers, to constrain the Quaternary slip rate and orientation of the Ash Hill fault. The fault offsets all but the active channel deposits in the valley, and slickenlines indicate a strike-slip to dip-slip ratio of 3.5:1. An offset volcanic unit dated at 4 Ma provides a minimum slip rate of 0.3±0.1 mm yr⁻¹, and a long-term strike-slip to dip-slip ratio of 5.2:1. Slip on the fault has warped a palaeolake shoreline within the valley. Simple elastic dislocation modelling of the vertical deformation of the shoreline suggests total fault slip of ≈60 m, valley-side up. The shoreline probably dates to 120–150 ka, implying a late Quaternary slip rate of 0.4–0.5 mm yr⁻¹. We suggest two possible mechanisms for the apparently anomalous slip behaviour of the Ash Hill fault. The fault may be a listric structure related to the proposed low-angle fault underlying Panamint Valley. Alternatively, the Ash Hill fault is a high-angle fault, implying that the valley is currently bounded by high-angle dextral-slip faults. Lack of detailed subsurface information precludes any knowledge of the true relationships between the presently active faults.     

Chronology of relict lake deposits in the Spiti River, NW Trans Himalaya: Implications to Late Pleistocene–Holocene climate-tectonic perturbations

The Spiti River that drains through the arid Trans-Himalayan region is studied here. The relict deposits exposed along the river provide an opportunity to understand the interaction between the phases of intense monsoon and surface processes occurring in the cold and semi arid to-arid Trans-Himalayan region. Based on geomorphological observation the valley is broadly divided into the upper and lower Spiti Valley. The braided channel and the relict fluvio-lacustrine deposits rising from the present riverbed characterize the upper valley. The deposits in the lower valley occur on the uplifted bedrock strath and where the channel characteristics are mainly of meandering nature. Conspicuous is the occurrence of significantly thick lacustrine units within the relict sedimentary sequences of Spiti throughout the valley. The broad sedimentary architecture suggests the formation of these palaeolakes due landslide-driven river damming. The Optically Stimulated Luminescence (OSL) dating of quartz derived from the bounding units of the lacustrine deposits suggests that the upper valley preserves the phase of deposition around 14–6 ka and in the lower valley around 50–30 ka. The review of published palaeoclimatic palaeolake chronology of Spiti Valley indicates that the lakes were probably formed during the wetter conditions related to Marine Isotope Stage III and II. The increased precipitation during these phases induced excessive landsliding and formation of dammed lakes along the Spiti River. The older lacustrine phase being preserved on the uplifted bedrock strath in the lower valley indicates late Pleistocene tectonic activity along the Kaurick Chango normal fault.     

Luminescence chronology of incision and channel pattern changes in the River Ganga, India

The River Ganga in the central Gangetic plain shows the incision of 20 m of Late Quaternary sediments that form a vast upland terrace (T₂). The incised Ganga River Valley shows two terraces, namely the river valley (terrace-T₁) and the present-day flood plain (terrace-T₀). Terrace-T₁ shows the presence of meander scars, oxbow lakes, scroll plains, which suggests that a meandering river system prevailed in the past. The present-day river channel flows on terrace-T₀ and is braided, sensu stricto. It is thus inferred that the River Ganga experienced at least two phases of tectonic adjustments: (1) incision and (2) channel metamorphosis from meandering to braided.Optical dating of samples from three different terraces has bracketed the phase of incision to be <6 and 4 ka. Different ages of the top of terrace-T₂ show that this surface experienced differential erosion due to tectonic upwarping in the region, which also caused the river incision. River metamorphosis occurred some time during 4 and 0.5 ka.     

Fluvial process and morphology of the Brahmaputra River in Assam, India

The Brahmaputra River finds its origin in the Chema Yundung glacier of Tibet and flows through India and Bangladesh. The slope of the river decreases suddenly in front of the Himalayas and results in the deposition of sediment and a braided channel pattern. It flows through Assam, India, along a valley comprising its own Recent alluvium. In Assam the basin receives 300 cm mean annual rainfall, 66–85% of which occurs in the monsoon period from June through September. Mean annual discharge at Pandu for 1955–1990 is 16,682.24 m³ s^{− 1}. Average monthly discharge is highest in July (19%) and lowest in February (2%). Most hydrographs exhibit multiple flood peaks occurring at different times from June to September. The mean annual suspended sediment load is 402 million tons and average monthly sediment discharge is highest in June (19.05%) and lowest in January (1.02%). The bed load at Pandu was found to be 5–15% of the total load of the river. Three kinds of major geomorphic units are found in the basin. The river bed of the Brahmaputra shows four topographic levels, with increasing height and vegetation. The single first order primary channels of this braided river split into two or more smaller second order channels separated by bars and islands. The second order channels are of three kinds. The maximum length and width of the bars in the area under study are 18.43 km and 6.17 km, respectively. The Brahmaputra channel is characterised by mid-channel bars, side bars, tributary mouth bars and unit bars. The geometry of meandering tributary rivers shows that the relationship between meander wavelength and bend radius is most linear. The Brahmaputra had been undergoing overall aggradation by about 16 cm during 1971 to 1979. The channel of the Brahmaputra River has been migrating because of channel widening and avulsion. The meandering tributaries change because of neck cut-off and progressive shifting at the meander bends. The braiding index of the Brahmaputra has been increasing from 6.11 in 1912–1928 to 8.33 in 1996. During the twentieth century, the total amount of bank area lost from erosion was 868 km². Maximum rate of shift of the north bank to south resulting in erosion was 227.5 m/year and maximum rate of shift of the south bank to north resulting in accretion was 331.56 m/year. Shear failure of upper bank and liquefaction of clayey-silt materials are two main causes of bank erosion.     

Effects of tectonics and lithology on long profiles of 16 rivers of the southern Central Massif border between the Aude and the Orb (France)

The analysis of longitudinal profiles of river channels and terraces in the southern Central Massif border, between the Aude and the Orb, allows the detection of anomalies caused by lithology and/or tectonic distortions. The rivers which have abnormally high slope and non-lithological knickzones indicate the main uplifted zones: the Montagne Noire and the Saint-Chinian ridge. A geomorphological and sedimentological analysis of detrital deposits was carried out as a basis for correlating the different formations, reconstructing the palaeodrainage and finding the main uplift and fluvial incision stages. During the Miocene, uplift remains limited as it is shown by the correlative fine deposits in the Languedocian piedmont. The Messinian incision (5.7–5.3 Ma) does not cross the Saint-Chinian ridge. On the other hand, fluvial incision becomes widespread in the Montagne Noire during the Upper Pliocene (3.4–2 Ma) when coarse deposits overlie either the Pliocene clay in the Orb palaeovalley or the Messinian conglomerates at the Cesse outlet. An Upper Pliocene uplift of the Montagne Noire and of the Saint-Chinian ridge is the cause of this incision and also of the diversion of the Cesse towards the Aude. Where the uplift rate was higher than incision rate, knickzones have developed like in the Avant-Monts south-side. The knickzones of lithological origin maintain a strong vertical stability during all the river incision stages. On the other hand, those of tectonic origin or base level lowering record upstream migration and their rate of retreat is controlled by the river discharge. As incision occurs only during the cold/temperate transition periods during the Quaternary, upward erosion slowly migrates (15 km since the Upper Pliocene, on the Orb) and so does not reach the riverheads.     

Rock varnish microlamination dating of late Quaternary geomorphic features in the drylands of western USA

Varnish microlamination (VML) dating is a correlative age determination technique that can be used to date and correlate various geomorphic features in deserts. In this study, we establish a generalized late Quaternary (i.e., 0–300 ka) varnish layering sequence for the drylands of western USA and tentatively correlate it with the SPECMAP oxygen isotope record. We then use this climatically correlated varnish layering sequence as a correlative dating tool to determine surface exposure ages for late Quaternary geomorphic features in the study region. VML dating of alluvial fan deposits in Death Valley of eastern California indicates that, during the mid to late Pleistocene, 5–15 ky long aggradation events occurred during either wet or dry climatic periods and that major climate shifts between glacial and interglacial conditions may be the pacemaker for alteration of major episodes of fan aggradation. During the Holocene interglacial time, however, 0.5–1 ky long brief episodes of fan deposition may be linked to short periods of relatively wet climate. VML dating of alluvial desert pavements in Death Valley and the Mojave Desert reveals that pavements can be developed rapidly (< 10 ky) during the Holocene (and probably late Pleistocene) in the arid lowlands (< 800 m msl) of these regions; but once formed, they may survive for 74–85 ky or even longer without being significantly disturbed by geomorphic processes operative at the pavement surface. Data from this study also support the currently accepted, “being born at the surface” model of desert pavement formation. VML dating of colluvial boulder deposits on the west slope of Yucca Mountain, southern Nevada, yields a minimum age of 46 ka for the emplacement of these deposits on the slope, suggesting that they were probably formed during the early phase of the last glaciation or before. These results, combined with those from our previous studies, demonstrate that VML dating has great potential to yield numerical age estimates for various late Quaternary geomorphic features in the western USA drylands.     

华南与中南半岛三角洲发育特征之比较

韩江、珠江、红河、湄公河、湄南河三角洲同处东亚季风热带。河流丰水少沙,径流强劲, 洪枯流量比值大,洪泛平原和湿地发育,有珊瑚礁和红树林堆积,平原推进速率较大,出海口门多,这些都是热带三角洲的特色。各三角洲的构造基础都是断陷盆地,由于断陷的幅度和时代不相同,故而第四系的厚度和年龄差异很大。受全球海平面变化的影响,末次冰期以来,各三角洲经历了相似的沉积过程,发育3期三角洲。所处位置(湾内或湾外)、滨外陆架坡度、海洋动力等条件,使各三角洲的地貌类型、地面高程、平原推进速率、水下三角洲、水动力类型等有较大的差异。