胶东牟平邓格庄金矿床流体包裹体研究

邓格庄金矿是胶东牟平-乳山金成矿带内第二大石英脉型金矿,金主要产于黄铁矿和多金属硫化物石英腑/细脉中。流体包裹体研究表明,邓格庄金矿不同蚀变带岩石和各成矿阶段金矿石中的流体包裹体主要有三种类型:H_2O-CO_2包裹体、CO_2-H_2O±CH_4包裹体和 H_2O 溶液包裹体。早期乳白色石英中主要赋存原生的 H_2O-CO_2包裹体和次生的 CO_2-H_2O±CH_4包裹体;成矿期黄铁矿石英脉和多金属硫化物石英脉中的 CO_2-H_3O±CH_4包裹体主要为原生,随机分布,气液比变化较大,有时出现不同相比例的包裹体共存现象,而 H_2O 溶液包裹体明显沿愈合裂隙分布;在成矿晚期的石英和方解石中主要发育原生 H_2O 溶液包裹体。显微测温结果显示,成矿前(第1阶段)H_2O-CO_2包裹体的完全均一温度(T_(h,TOT),至液相)为254℃至365℃,成矿期(第Ⅱ和Ⅲ阶段)CO_2-H_2O±CH_4包裹体的完全均一温度(T_(h,TOT),至液相)为195～317℃,成矿后(第Ⅳ阶段)H_2O 溶液包裹体的均一温度(T_(h,TOT);至液相)为156～219℃。成矿的初始流体富 CO_2,主成矿期有 CH_4流体加入,成矿晚期则演化为低温的水溶液流体。水/岩反应及流体不混溶可能是邓格庄金矿金沉淀的主要原因。     

胶东蓬莱金矿区流体包裹体和氢氧同位素地球化学研究

蓬莱地区金矿床以石英脉型为主,其次是蚀变岩型;成矿条件与著名的玲珑金矿床相似。金主要产于黄铁矿和多金属硫化物石英脉中。流体包裹体研究表明,金矿床中主要存在两种类型的流体包裹体:CO_2-H_2O 包裹体和中低盐度的NaCl-H_2O 溶液包裹体。CO_2-H_2O 包裹体气相以 CO_2为主,可含少量 CH_4、H_4S、CO。其中,黄铁绢英岩的石英中含有丰富的CO_2-H_2O 包裹体,而黄铁矿石英脉和多金属硫化物石英脉中富 CO_2与富 H_2O 的 CO_2-H_2O 包裹体共存。显微测温结果显示,黄铁绢英岩中的 CO_2-H_2O 包裹体的均一温度范围为230℃～300℃;而黄铁矿和多金属硫化物石英包裹体的均一温度为220℃～390℃,鉴于这些包裹体是从不混溶的 CO_2-H_2O 流体中捕获的,因此它们的温度下限220℃～250℃左右,应该看作是它们的形成温度。成矿早期流体为富含挥发份(流体密度0.92～0.985g/cm~3)、中低盐度(4.15%～5.23%NaCl eqv)的流体;到主成矿期逐渐演化为温度升高,盐度变化范围大(1.02%～15.5%NaCl eqv),水溶液以 NaCl 为主,气体仍以 CO_2为主,但可含少量的 CH_2、H_2S、CO 及有机质等的流体(流体密度0.32～0.99g/cm~3);成矿期后的流体盐度、温度及 CO_2含量降至最低。本区矿床中石英的δ~(18)O 值变化在13.8‰～18.3‰,成矿流体的δ~(18)O 值在4.9‰～10.9‰之间,流体包裹体中δD变化范围很小,从-78‰变化到-101‰,主要集中在-78‰～-88‰之间。由此表明成矿流体以岩浆水为主,伴有大气降水的参与。在主成矿期成矿流体表现出明显的多期、多来源特征。温度降低和流体不混溶是导致金等成矿元素沉淀和富集的重要机制。     

甘肃干沙鄂博稀土矿床熔体和流体包裹体对成矿的制约

甘肃天祝干沙鄂博稀土矿床产于霓辉正长岩和霓辉正长斑岩中,矿体形态呈不规则脉状、透镜状和板状。成矿过程可分为岩浆期、岩浆-热液期、热液期和表生期,其中岩浆-热液期为主要成矿期。本矿床中的包裹体有熔体包裹体、流体-熔体包裹体、H_2O包裹体、CO_2包裹体、CO_2-H_2O包裹体、含子矿物H_2O包裹体和含子矿物CO_2-H_2O包裹体7类,并以富含流体-熔体包裹体、CO_2-H_2O包裹体为显著特征。包裹体组合从熔体包裹体→流体-熔体包裹体、H_2O包裹体、CO_2包裹体和CO_2-H_2O包裹体→H_2O包裹体的变化,反映本矿床的形成经历了从岩浆→岩浆+热液→热液的演化过程。岩浆期熔体包裹体均一温度为780℃;岩浆-热液期均一温度为191~700℃,盐度为5.26%~22.24%,属中低盐度,成矿压力为68~95 MPa,相应的成矿深度为2.6~3.6 km;热液期均一温度为129~225℃,盐度为0.35%~7.73%,为低盐度。从岩浆期到岩浆-热液期再到热液期,温度逐渐降低,矿化作用主要发生在岩浆-热液期,属中高温、中深成岩浆-热液过渡型矿床。     

新疆托里县哈西金矿床包裹体-同位素地球化学及成因探讨

哈西金矿床位于哈萨克斯坦―准噶尔板块(Ⅰ级)唐巴勒―卡拉麦里沟弧带(Ⅱ级)西准南部扎依尔推覆体(Ⅲ级)玛依勒―哈图构造块体(Ⅳ)。通过矿床流体包裹体岩相学、显微测温学和包裹体激光拉曼光谱分析研究成矿流体性质,探讨矿床成因类型。研究结果表明,流体包裹体有气液两相、含纯液相和纯气相包裹体3种类型。气相成分以CO_2为主,其次是H_2O,总体属于CH_4-H_2O-CO_2体系;结合氢氧同位素地球化学特征(δD值为-60‰~-67.4‰;δ~(18)O值为14.3‰~16.8‰),以及稀土配分和同位素定年证据,确定本区成矿物质来于深部,成矿流体主要来源于火山-次火山岩浆热液,矿床形成于海西期具两阶段成矿特点,属中低温热液矿床。     

浙江中部火山岩地区金矿床流体包裹体的研究

本文主要记述了治岭头、八宝山和庄山三个矿区,通过与金矿有关的流体包裹体的研究,阐明了成矿的物理化学条件和矿床的成因。它们的成矿温度主要集中于140～330℃,为低温矿床。成矿的压力集中于12～41MPa,成矿深度约为0.3～1.2km。气体组分的还原参数较低,平均为0.4,fo_2约为10~(-32)～10~(-41),成矿溶液富水和CO_2。治岭头成矿溶液为NaCl-KCl-CaSO_4-H_2O体系,而八宝山为KCl-NaCl-CaSO_4-H_2O体系,属于弱酸性。成矿溶液的含盐度为(0.7～2.5)wt%NaCl,属于低盐度,其密度值为0.7～0.85g/c1m~3。流体包裹体氢氧同位素δD(‰)为-58.5至91.1,δ~(18)O_(H_2O)(‰)为+3至-9,成矿溶液主要由大气降水(或地下水)和岩浆热液混合组成。     

辽宁白云金矿床成矿流体特征、成矿物质来源及成因研究

辽宁白云金矿是辽东-吉南裂谷带内典型的大型金矿床,其成矿作用复杂,为了深入揭示其成矿流体、成矿物质来源及成矿模式特征,针对白云金矿石进行流体包裹体、H,O,S及与成矿有关的岩体的研究,结果显示:5块金矿石流体包裹体的均一温度范围为152℃~370℃,主要分布在240℃~310℃,激光拉曼成分主要为CO_2和CH_4,有少量H_2O,极少数有N_2;5块金矿石δ~(34)S值为-8.5‰~+1.6‰(平均为-4.85‰),赋矿围岩(黑云片岩、变粒岩)中δ~(34)S值为+10.0‰~+17.0‰(平均为+14.57‰),地层大理岩的δ~(34)S值为-0.5‰~+13.2‰(平均为+7.17‰);5块金矿石石英中δ~(18)O为8.0‰~15.5‰,δD为-96.3‰~-73.6‰;与成矿有关的新岭岩体SHRIMP U-Pb年龄为217.6Ma±2.2Ma。流体包裹体特征表明:成矿流体为中温低盐度低密度的水盐流体,属于含N_2的H_2O-CO_2-CH_4-NaCl体系。流体中CO_2及CH_4形成与大理岩有关,极少数的N_2含量可能与大气水有关。氢氧同位素结果显示,成矿热液主要来源于深部岩浆水,后期混有部分大气降水。硫同位素特征表明,成矿物质可能主要来自岩浆热液。综上,白云金矿床的主成矿期为印支期,白云金矿床属于岩浆热液型金矿。     

豫西南高庄金矿床流体包裹体组合研究及其成矿流体特征

高庄金矿床形成于华北板块和扬子板块造山后的板内伸展环境,矿体是二郎坪群中充填于平行造山带走向的脆韧性剪切带中的石英-金多金属硫化物矿脉。本次运用"流体包裹体组合"(FIA)方法进行流体包裹体特征研究。研究表明,高庄金矿含矿石英中包裹体主要有CO_2-H_2O型三相包裹体、CO_2包裹体和水溶液包裹体3种类型,其中,CO_2-H_2O型三相包裹体为主体类型,完全均一温度变化范围为286~349℃,w(Na Cleq)为0.41%~4.14%,估算流体密度为0.788~0.874 g/cm3,成矿压力为130~160 MPa,成矿深度为4.8~5.9 km,成矿流体具有中温,富CO_2、低盐度的特征。在同一视域内可见CO2-H2O型三相包裹体和水溶液包裹体共存,均一方式各异,且均有相近的均一温度,指示存在流体不混溶作用。成矿流体中水的δDH_2O=-83.4‰~-76.3‰,δ18OH_2O=5.8‰~7.1‰,显示成矿流体来自于岩浆热液。结合区域构造背景,认为高庄金矿床为形成于华北板块与扬子板块碰撞造山作用后,板块内部构造变形过程中形成的中温岩浆热液型金矿。     

三道湾子金矿床流体包裹体及稳定同位素地球化学特征

三道湾子金矿位于大兴安岭燕山期成矿带东南部,为典型的石英脉型金矿.通过对矿床地质特征、成矿期次及硫、氢、氧同位素组成和流体包裹体测温研究,讨论了成矿流体的来源及矿床形成的温度.黄铁矿δ34S值为-1.1‰～1.7‰,显示硫具地幔来源的特点;石英δ18O水值为-15.3‰～-9.9‰,δDV-SMOW值为-110‰～-85‰,说明成矿流体主要为大气降水;流体包裹体均一温度为181～267℃;表明三道湾子金矿为与火山热液有关的中-低温浅成热液矿床.     

胶东乳山脉状金矿床成矿流体性质与演化

位于胶东牟平-乳山金矿带中部的乳山金矿(原称金青顶金矿)是目前我国单脉金储量最大的矿床,金主要产于黄铁矿和多金属硫化物石英脉/细脉中。流体包裹体研究表明,乳山金矿不同蚀变带岩石和各成矿阶段金矿石中的流体包裹体有两种类型:CO_2～H_2O 包裹体和水溶液包裹体。钾长石化蚀变岩、黄铁绢英岩和弱蚀变花岗岩的石英中含有丰富的 CO_2-H_2O 包裹体,而黄铁矿石英脉和多金属硫化物石英脉中 CO_2-H_2O 包裹体数量逐渐减少,以富水的 CO_2-H_2O 两相包裹体和水溶液包裹体为主。显微测温结果显示,弱蚀变花岗岩、钾长石化岩石和黄铁绢英岩石英中的 CO_2-H_2O 包裹体的均一温度范围为236～377℃;而黄铁矿和多金属硫化物石英包裹体的均一温度为170～324℃。成矿早期流体为富含挥发份(X_(CO_2)高达0.53)、中低盐度(3.33～10.48 wt% NaCl)的流体,到主成矿期逐渐演化为以含较低的 CO_2的富水流体(X_(CO_2)为0.01～0.05) 和水溶液流体,盐度为1.23～12.55Wt% NaCl。金和硫化物(尤其是黄铁矿)紧密共生,说明金主要以金硫络合物形式被搬运,CO_2包裹体的广泛存在则表明其对成矿流体的 pH 变化起着重要的抑制作用。水/岩反应、温度下降和压力降低引起的流体不混溶可能是乳山金矿金沉淀成矿的主要原因。     

甘肃阳坝铜多金属矿床流体包裹体及S、Pb同位素组成特征

甘肃省阳坝铜多金属矿床位于碧口地体的东北部,矿体呈层状、似层状赋存于碧口群阳坝组细碧凝灰岩和凝灰质千枚岩的过渡部位,根据矿床地质特征,将成矿期划分为海底火山喷流沉积期和变质热液叠加改造期。基于对阳坝矿床详细的野外观察和矿相学的研究,通过对矿床流体包裹体和S、Pb同位素的研究,总结矿床的成矿流体性质和成矿物质来源,探讨成矿机制。研究表明,阳坝矿床海底火山喷流沉积期流体包裹体类型主要为水溶液包裹体,成矿流体均一温度为135～336℃,盐度w(NaCl_(eq))为0.70%～10.61%,密度为0.58～0.97g/cm~3;包裹体气相成分以H_2O为主,含少量的CO_2和N_2,属于中低温、低盐度的H_2O-NaCl流体体系,与典型VMS型矿床成矿流体特征相似;变质热液叠加改造期流体包裹体类型主要为水溶液包裹体、CO_2-H_2O包裹体和纯CO_2包裹体,成矿流体均一温度为179～384℃,盐度w(NaCl_(eq))为3.39%～14.78%,密度为0.61～0.99 g/cm~3,包裹体气相成分富含CO_2及少量N_2,属于中高温、低盐度的H_2O-CO_2-NaCl±N_2流体体系,与区域上造山型金矿成矿流体特征一致,均为来自深部的变质流体。喷流沉积期矿石硫化物的δ~(34)S为-7.5‰～3.4‰,均值为-0.46‰,成矿热液δ~(34)S_(∑S)值≈3.73‰,变质热液叠加改造期硫化物的δ~(34)S为-6.7‰～3.3‰,均值-0.575‰,均显示幔源硫的特征。喷流沉积期(~(206)Pb/~(204)Pb=17.505～18.008、~(207)Pb/~(204)Pb=15.521～15.558、~(208)Pb/~(204)Pb=37.494～37.851)与变质热液叠加改造期(~(206)Pb/~(204)Pb=17.293～17.947、~(207)Pb/~(204)Pb=15.498～15.542、~(208)Pb/~(204)Pb=37.388～37.640)的矿石硫化物的Pb同位素组成相近,认为2期矿石铅具有相同来源。通过与阳坝组火山岩、阳坝岩体的Pb同位素组成对比,并结合Pb同位素源区特征值、构造模式图解和△β-△γ成因分类图解分析,认为矿石铅来自上地壳和地幔的混合。阳坝铜多金属矿床属于海底火山喷流沉积-变质热液叠加改造型矿床。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.