SPOT卫星影像在德尔尼铜矿区域地质研究中的应用

利用卫星遥感影像对青海省德尔尼铜矿区的区域地质做了判释性研究：（１）判释出３条左旋平移断层及一组羽式构造,并测得其中一条断层的左旋平移距离为１２５０ｍ,而在以往１：２０万和１：５万的地质填图中均末发现这３条断层的平移性质;（２）判释出作为蛇绿岩组成部分的地幔橄榄岩呈现与一般岩浆岩不同的影像特征。     

基于卫星影像解析的碳酸盐岩地区地质构造研究——以江苏徐州大北望地区为例

本文通过区域地质背景分析与卫星影像解析,建立了岩性、地层、产状、褶皱和断层发育的影像判识模型,结合野外地质勘察校验与构造变形特征分析,对徐州大北望地区的地质构造进行了研究。研究表明:卫星影像解析对碳酸盐岩地区的岩性、产状和构造均具有很好的判识程度,利于快捷准确地开展地质调查工作,为野外地质工作研究提供了新思路。根据地形地貌、岩层露头、"V"字形法则、地层分布、褶皱和断层识别标志在卫星影像中的响应特征,建立了岩性、地层、产状、褶皱和断层发育的影像判识模型,并对大北望地区进行了构造识别和野外地质校验。大北望地区地质构造较为发育,NE向直立水平家后山背斜构造整体控制该区的地层分布和地形地貌特征,大型NE向纵向和斜交逆断层的发育造成局部地层缺失,NW向和NWW向斜向平移断层的发育造成了局部地层错移和山谷发育。     

青海西南部乌丽活动断裂系的地质特征及灾害效应

乌丽活动断裂系发育于乌丽山地，是青藏高原北部重要的区域性活动构造体系，由乌丽北山活动断裂、乌丽盆缘活动断裂和乌丽南山活动断裂所组成，主要包括17条不同规模、不同性质的活动断层。大部分活动断层属左旋斜滑断层，部分活动断层为左旋走滑断层。据地质观测资料估算，典型活动断层全新世左旋走滑速度分量为1．2—3．5mm／a、垂直下滑速度分量为0．5—3．5mm／a。沿乌丽活动断裂系发育5条宽100—400m的构造裂缝带、大量串珠状冰丘群与少量移动冰丘，构造裂缝产生的高密度地表破裂和移动冰丘造成的地表拱曲变形是影响青藏铁路、公路线路工程安全的主要地质灾害。     

甘肃省巴藏幅1∶50 000矿产地质图数据库

甘肃省巴藏幅(I48E013009)1∶50 000 矿产地质图数据库在《矿产地质调查成果图件编制指南(1∶50 000)》(讨论稿)和三位一体找矿预测地质模型的指导下编制完成。采用数据为既往1∶50 000区域地质调查实际材料图、矿产勘查报告、科学研究报告、论文和1∶50 000专项填图采集的数据，共形成数据记录：产状811条、地质界线102条、同位素年龄5条、化石2条、矿产信息21条、矿化蚀变带22条、断层86条、褶皱111条、建造65条。图面以主图和角图相结合地方式全面客观地表达了区域地质界线、岩石建造、年代、断层、褶皱轴迹、节理、劈理、皱纹线理、窗棂构造、断层面擦痕、矿化蚀变、矿产信息及典型矿床的成矿地质特征，其中包括加里东期风暴沉积和褶皱变形、早石炭世铁质结核及一系列新发现和新认识。在“建造构造”图层的属性中强调了含矿建造、矿化蚀变；在“断层”图层及“褶皱”构造图层的属性中强调了成矿构造。该数据库为区域成矿规律及工程地质、环境地质等领域的调查研究提供了基础资料，可供使用者根据需求进行检索。本文提交的巴藏幅MapGIS空间数据库数据量约为90.2 MB，Access数据库2.51 MB。     

蒙古戈壁天山断裂带晚新生代构造变形与构造地貌研究

跨越中蒙边境线的戈壁天山断裂带是一条大型左旋走滑断裂带,东西展布约700 km。通过解译分析Landsat ETM卫星遥感影像和SRTM数字高程模型(DEM)数据,对戈壁天山断裂带晚新生代构造活动及其地貌特征进行了研究。结果表明,沿戈壁天山断裂带发育了一系列断层陡坎、系统的水系错位、挤压脊等典型的走滑构造地貌类型。遥感影像解译结果还显示3处系统水系错位,均受戈壁天山断裂左旋走滑运动的影响,表现出系统的左旋水平位错。结合历史地震数据、先存的基底构造和断层系统,本区地震活动性呈现出不可预测性和复杂性。此外,发育在断裂带上的3个大型挤压脊构造中:Karlik Tagh和Gurvan Sayhan就位于走滑断裂的终端,其走滑分量减弱并逐渐转为以逆冲分量为主的构造特征。Nemegt Uul位于2条不连续的走滑断裂的汇合和叠置部位。走滑断层均穿过了挤压脊构造,同时伴随有逆冲作用分量,造成了挤压脊沿走向和垂直走向上的构造地貌生长,显示了是陆内造山带演化的重要过程。     

龙门山小鱼洞断裂在汶川地震中的地表破裂及地质意义

在龙门山中段小鱼洞地区映秀－北川断裂和彭县－灌县断裂发生了同震位移,同时在该地区新出现了一条北西向的同震破裂带——小鱼洞断裂的破裂带,并分割了两条近于平行的北东向逆冲－走滑型的主断裂。汶川特大地震发生后重点对小鱼洞断裂的地表破裂开展了详细的野外地质填图,利用全站仪和GPS对地表破裂进行了精确的测量。初步调查的结果表明,小鱼洞断裂位于映秀－北川断裂与彭县－灌县断裂之间,走向近于北西向,延伸约15km,以脆性破裂为特征,穿过小鱼洞大桥,并切割了多种类型的地貌单元,使道路发生拱曲、破坏和桥梁垮塌或移位。单个破裂长度在几米到300m不等,其南西盘为上升盘,北东盘为下降盘,平均垂直位错为1.0m,平均水平位错为2.3m,垂直与水平位错量之比1 ∶1～1 ∶2,显示为逆冲分量小于或等于左旋走滑分量,并以左旋走滑作用为主。同时,研究表明小鱼洞断裂属于映秀－北川断裂与彭县－灌县断裂之间的捩断层,其主要特征包括： 1)是在汶川地震中由于龙门山逆冲体之间的差异逆冲运动过程中而形成的断裂; 2)其走向近于北西向,垂直于龙门山北东向的主干断裂,而平行于逆冲体的逆冲运动方向; 3)具有高角度断面的断层,以左旋走滑作用为主。     

试论断层分类

对传统的根据断层两盘相对运动方向的形态分类提出补充意见,它们应该包括:(1)正断层;(2)逆断层;(3)平移断层;(4)水平断层;(5)垂直断层;(6)开口断层。同时提出原生断层与借生断层,真正断层与视正断层等新概念及其分类。     

基于地表数据及产状数据的交切断层建模方法研究

三维地质建模是地质研究的有力工具,断层的三维建模比其他地质体建模具有更大的难度,其中一个主要难题是交切断层切割关系的处理。本文以广西珊瑚矿田为例,探讨了基于地表数据和产状数据的交切断层建模方法,采用地表断层线-剖面断层轨迹-系列断层线-断层面的技术路线进行切割断层建模,采用初始断层面-断后约束条件-交切处理-约束插值的技术路线进行被切割断层的建模,并与其他建模方法的建模效果进行对比和讨论。最终形成了如下建模方法:(1)以旋转法求取部分切割断层的错开部位约束,以平移法求取完全切割断层的错开部位约束;以断层错开部位约束、地表断层线约束及断层面边界约束为控制条件,进行断层面DSI插值,实现断层错动;(2)局部法建模、分段断层线的平移连接及过度追求完全切割关系建模可能分别引起断层面延展可控性差、断面整体偏移误差及沿走向过度延伸问题,与地质事实相悖,故本文优选采用了整体法建模、顺延连接分段断层线及遵从原有切割关系的处理方法,获得了较好的建模效果。     

高密度电法在和田隐伏断层探测中的应用

西昆仑山前一系列的新生代背斜的翼部往往伴生向南斜倾的逆断裂,这些断裂隐伏于早更新世或中更新世洪积砂砾石层,构成了和田隐伏断裂带。该断裂带由2条陡坎状断层组成,宽约10.6km,深度20~300m,落差110~270m。根据卫星影像和地质工作成果,和田隐伏断裂的一支从和田市南部穿过,但南郊飞机场附近没有露头,为探查断层在该区域的位置及深度,沿垂直于推测的断层走向布设2条测线,采用温纳（WN）测量系统对其进行探测。探测结果表明：2条测线皆发现了逆断层,均上切错断了上覆晚更新世地层,其中测线1存在2处断层,一处断层倾向南,倾角50°左右,另一处断层倾向北,倾角约55°;测线2存在一处断层,倾向北,倾角近80°。通过比对高密度电法资料和地质出露点剖面,推断和田断层在第四系以来有过两次明显的活动,导致晚更新世砂砾石土层被断错。     

济阳坳陷内正断层与平移断层关系

以精细三维地震资料和构造解释成果为基础,通过将济阳坳陷内平移断层分成五个发育带,本文研究了各区带平移断层特征及其成因,并将正断层与平移断层的关系划分成了调节、派生、叠加三大类:调节关系包括平移断层斜断调节和变换调节正断层伸展,派生关系包括平移断层在两盘派生和在盖层中派生正断层,叠加关系包括断层先期平移一后期伸展和先期伸展一后期平移。晚中生代,济阳坳陷内断层形成于边界郯庐断裂的走滑作用,正断层与平移断层之间为派生关系;新生代,济阳坳陷受控于区域伸展应力场,平移断层形成于正断层的差异伸展,两种断层之间为调节关系;在上述两期构造演化中,若同一条断层经历了正断和平移两期变形,则称之为叠加关系。     

青藏高原北部晚第四纪应力场在遥感影像上的响应

青藏高原北部发育一系列北西向大型左行走滑断裂带,目前普遍认为这些左行走滑断裂至今仍在活动,在左行走滑作用下,青藏高原东部向东挤出并伴随强烈的地块旋转运动。本文以介于东昆仑左行走滑断裂带与玉树左行走滑断裂带之间的巴颜喀拉山中央断裂（及其周缘的构造形迹）为主要研究对象,根据断层构造的直接解译标志——清晰的线性形迹和构造地貌标志如断层陡坎、断层谷地、挤压脊、地裂缝、断层走滑造成的水系错动、新老洪积扇的侧向叠加等,在高分辨率的SPOT5及中等分辨率ETM遥感影像上对研究区内北西向活动断层与北东向活动断层的空间分布、规模、活动性质、相对活动时代及活动幅度等进行了遥感分析和野外验证,并结合对断层周缘沿共轭张裂隙展布的水系与地裂缝的规模、展布方向等的统计分析,对晚第四纪应力场进行了恢复。研究表明:北西向活动断层具右行走滑兼有逆冲运动特征,北东向活动断层具左行走滑兼有正滑运动特征,二者为晚第四纪NNE向（2°）挤压应力条件下产生的北西向与北东向走滑作用的产物。北西向右行走滑作用的发现,预示着青藏高原北部第四纪以来普遍存在的北西向左行走滑作用可能在晚更新世就已终止。在此基础上,探讨了处于不同展布方向上的湖盆在同一应力条件下表现出的不同演化趋势:即在NNE向挤压应力作用下,呈北东向展布的错坎巴昂日东湖处于近东西向拉张状态,呈北西向展布的卡巴纽尔多湖变化不明显。     

Neotectonics of the Eastern Margin of the Tibetan Plateau: New Geological Evidence for the Change from Early Pleistocene Transpression to Late Pleistocene-Holocene Strike-slip Faulting

We present in this paper some new evidence for the change during the Quaternary in kinematics of faults cutting the eastern margin of the Tibetan Plateau. It shows that significant shortening deformation occurred during the Early Pleistocene, evidenced by eastward thrusting of Mesozoic carbonates on the Pliocene lacustrine deposits along the Minjiang upstream fault zone and by development of the transpressional ridges of basement rocks along the Anninghe river valley. The Middle Pleistocene seems to be a relaxant stage with local development of the intra-mountain basins particularly prominent along the Minjiang Upstream and along the southern segment of the Anninghe River Valley. This relaxation may have been duo to a local collapse of the thickened crust attained during the late Neogene to early Pleistocene across this marginal zone. Fault kinematics has been changed since the late Pleistocene, and was predominated by reverse sinistral strike-slip along the Minshan Uplift, reverse dextral strike-slip on the Longmenshan fault zone and pure sinistral strike-slip on the Anninghe fault. This change in fault kinematics during the Quaternary allows a better understanding of the mechanism by which the marginal ranges of the plateau has been built through episodic activities.     

Deformation at the Easternmost Altyn Tagh Fault: Constraints on the Growth of the Northern Qinghai–Tibetan Plateau

How the Altyn Tagh fault(ATF) extends eastwards is one of the key questions in the study of the growth of the Qinghai–Tibetan Plateau. Detailed fieldwork at the easternmost part of the ATF shows that the ATF extends eastward and bypasses the Kuantan Mountain; it does not stop at the Kuantan Mountain, but connects with the northern Heishan fault in the east. The ATF does not enter the Alxa Block but extends eastward along the southern Alxa Block to the Jintanan Mountain. The Heishan fault is not a thrust fault but a sinistral strike-slip fault with a component of thrusting and is a part of the ATF. Further to the east, the Heishan fault may connect with the Jintananshan fault. A typical strike-slip duplex develops in the easternmost part of the ATF. The cut and deformed Quaternary sediments and displaced present gullies along the easternmost ATF indicate that it is an active fault. The local highest Mountain(i.e., the Kuantan Mountain) in the region forms in a restraining bend of the ATF due to the thrusting and uplifting. The northward growth of the Qinghai–Tibetan Plateau and the active deformation in South Mongolia are realized by sinistral strike-slipping on a series of NE–SW-trending faults and thrusting in restraining bends along the strike-slip faults with the northeastward motion of blocks between these faults.     

赣江断裂带中生代的演化及其地球动力学背景

赣江断裂带是江西省境内醒目的北北东向平移断裂构造带,由一系列北北东向、北东向和北西向断裂束组成,表现为一个大规模的左行走滑脆性剪切带并兼具伸展断陷和右旋走滑的成份。赣江断裂带在重力、航磁异常呈现为显著的梯度带,是一条晚中生代的岩浆岩带,控制了以鄱阳盆地为代表的一系列白垩纪-古近纪沉积盆地的形成与发育。该带在中生代的演化可分为早-中侏罗世压扭、晚侏罗早-白垩世左行平移和晚白垩世上盘斜落的右行平移3个阶段。在侏罗纪以来太平洋板块对欧亚大陆斜向俯冲的大背景下,赣江断裂带的形成和演化与华南广为发育的燕山期陆内造山作用密切相关,北北东向断裂的发育则直接受郯庐断裂早白垩世左行走滑活动控制,因而表现出“北强南弱”和“北早南晚”的特点。白垩纪时赣江断裂的活动方式与郯庐断裂一致,可认为是后者的南延。     

Initiation Timing of the Jiamusi–Yitong Fault Zone in NE China

The NE–striking Jiamusi–Yitong fault zone(JYFZ) is the most important branch in the northern segment of the Tancheng–Lujiang fault zone. The precise shearing time of its large–scale sinistral strike–slip has yet to determined and must be constrained. Detailed field investigations and comprehensive analyses show that strike–slip faults or ductile shear belts exist as origination structures along the western region of Yitong Graben. The strike of the shear belts trend to the NE–SW with steep mylonitic foliation. The zircon U–Pb dating result for the granite was 264.1±1 Ma in the ductile shear belt of the JYFZ. The microstructural observation(rotated feldspar porphyroclasts, S–C fabrics, and quartz c–axis fabrics, etc.) demonstrated the sinistral shearing of the ductile shear zones. Moreover, the recrystallized quartz types show a transitional stage of the subgrain rotation toward the recrystallization of the grain boundary migration(SR–GBM). Therefore, we suggest that the metamorphic grade of the shear zone in the ductile shear zones should have reached high greenschist facies conditions, and the deformation temperatures should approximately 450–500°C, which is obviously higher than the blocking temperature of muscovite(300–400°C). Hence, the ~(40)Ar/~(39)Ar isochron age of muscovite from ductile shear zones should be a cooling age(162.7±1 Ma). We infer that the sinistral strike–slipping event at the JYFZ occurred in the late Jurassic period, and it was further inferred from the ages of the main geological events in this region that the second sinistral strike–slip age of the Tancheng–Lujiang fault zone occurred during the period of tectonic movements in the Circum–Pacific tectonic domain. This discovery also indicates the age of the Tancheng–Lujiang fault zone that stretches to northeastern China. The initiation of the JYFZ in the late Jurassic is related to the speed and direction of oblique subduction of the west Pacific Plate under the Eurasian continent and is responsible for collision during the Jurassic period.     

The onset of the Tan–Lu fault movement in eastern China: constraints from zircon (SHRIMP) and 40Ar/39Ar dating

In eastern China, the Dabie Shan–Su–Lu orogenic belt has been separated by the Tan–Lu sinistral strike–slip fault. Mylonites are exposed along the strike–slip fault system in the southern segment, and along the eastern margin of the Dabie Shan orogenic belt. The country rocks of the mylonites are retrograde UHP eclogites, gneissic granites, muscovite granites and gneisses. The ductile strike–slip shear zone trends 30–40°N (NE30–40°‐trending) and exhibits stretching lineations and nearly vertical, SE‐dipping foliations. Most of the zircon grains separated from mylonites have a weighted average radiometric age of 233 ± 6–225 ± 6 Myr. These data constrain the onset of the Tan–Lu sinistral strike–slip movement and imply that the Tan–Lu sinistral strike–slip motion developed after retrograde UHP metamorphism. The related phengite within the eclogite rocks on the western side of the Tan–Lu fault, with ⁴⁰Ar/³⁹Ar plateau ages of c. 182–190 Myr, is also deformed and aligned parallel to the almost NE trending stretching lineations. Non‐metamorphosed granites exhibit sinistral strike–slip shearing and indicate that the Tan–Lu fault initially developed after 182–190 Myr. Muscovite collected from the mylonite yields ⁴⁰Ar/³⁹Ar plateau ages of 162 ± 1–156 ± 2 Myr. The zircon SHRIMP age data, the muscovite ⁴⁰Ar/³⁹Ar plateau ages, together with structural and petrological field information support the interpretation that the Tan–Lu strike–slip fault was not related to the Yangtze–north China plates collision, but corresponded to the formation of a NE‐trending tectonic framework in eastern China starting c. 165–160 Ma.     

Structural Analysis of the Luowei Orefield in Xidamingshan,Guangxi, China

Many types of hydrothermal deposits (e.g. W, Bi, Pb, Zn, Ag) are confined by faults and hidden granodiorite in the Luowei Orefield in Xidamingshan, Guangxi, China. The orebodies in the Luowei W–Bi deposit are predominantly layered and distributed along bedding in sandstones of the Cambrian Xiaoneichong Formation. The orebodies in the Lujing Pb–Zn deposit are controlled mainly by west‐south‐west (WSW)‐trending faults, and those in the Fenghuangshan Ag deposit are controlled mainly by west‐north‐west (WNW)‐trending faults, which were reverse faults during mineralization and were later reactivated as sinistral strike‐slip faults. The Luowei fault was formed postmineralization and resulted in sinistral displacement of the subsurface granodiorite and the Cambrian strata. A tectonomagmatic mineralization model of the Luowei Orefield is proposed, and the following conclusions were made. (i) Under a regional N–S compressive stress regime, WSW‐ and WNW‐trending reverse faults and N–S‐trending tensional fractures were formed. (ii) Magma intruded along the tensional fractures. Under the force of magmatic thermodynamics, mineralizing fluid migrated along bedding planes in sandstones and formed W–Bi orebodies at favorable sites. Some fluid migrated along WSW‐ and WNW‐trending faults to sites farther from the magma source, forming vein‐type Pb–Zn and Ag orebodies. (iii) After mineralization, under ~E–W compression, a NW‐trending left‐lateral slip fault was formed, cutting the subsurface granodiorite and orebodies. Concurrently, sinistral shear slip occurred on WNW‐trending ore‐controlling faults. However, the small displacement on these faults did not change the overall distributions of the rock mass and orebodies.     

红河断裂活动对琼东南盆地环崖南凹陷构造-沉积-成藏的影响

琼东南盆地西部环崖南凹陷的油气勘探亟需寻找接替领域。针对勘探研究中存在的3个地质问题,利用丰富的钻井和地震资料对红河断裂活动特征及其对环崖南凹陷构造-沉积-成藏的影响开展深入分析。认为红河断裂的走滑活动通过F1断层向琼东南盆地西部传递剪切应力,其演化与环崖南凹陷的构造-沉积作用具有良好的时空耦合关系,并控制了环崖南凹陷的油气运移。晚渐新世,红河断裂左行走滑活动,通过F1断层在琼东南盆地西部诱导产生EW向挤压应力和SN向拉张应力,加剧了盆地西部的南北向快速拉张裂陷,形成了崖北凹陷和崖南凹陷两个沉积中心。中中新世—晚中新世,红河断裂处于平静期,受区域右旋张扭应力控制及海南岛物源减少的影响,环崖南凹陷呈现局部隆升,碳酸盐台地发育,梅山组一段及黄流组二段大范围缺失。上新世至今,红河断裂右行走滑活动,通过F1断层在琼东南盆地西部诱导产生SN向挤压应力和EW向拉张应力,对盆地西部的拉张具有约束作用,并造成NEE、NE走向断层受挤压作用而处于封闭状态,NW走向断层受张扭应力作用而处于开启状态。上新世为盆地生排烃高峰期,NW走向断层可有效输导油气,而NEE、NE走向断层的油气输导能力较差,这合理解释了已钻构造的油气发现情况。环崖南凹陷下一步油气勘探应重点围绕NW走向断裂带展开。     

准噶尔西北缘斜向挤压构造与走滑断裂

古板块构造研究表明古生代以来,准噶尔地块以斜向方式拼合到阿尔泰（Altaids）造山带构造域内,导致准噶尔西北缘一直处在斜向挤压构造背景之下,并发育高角度逆冲推覆构造带以及横向走滑断裂。地面地质调查、遥感卫星影像解译、大地电磁测深剖面和地震剖面构造解释资料综合研究表明,准噶尔西北缘边界断裂为达拉布特左行走滑断裂,西北缘逆冲推覆构造带为基底卷入的高角度逆冲断裂褶皱带; 在与逆冲带走向相垂直方向,发育有北西向横向走滑断裂,这些断裂为同一斜向挤压构造背景下形成的同期构造,形成时间约在晚二叠到侏罗纪之间。大地电磁测深和地震剖面解释表明,达拉布特走滑断裂控制了西北缘高角度逆冲断裂的分布与性质。西北缘二维和三维地震剖面解释表明,横向走滑断裂样式为正花状构造或者负花状构造,同时具有向南东或北西方向逆冲和拉伸的特征。横向走滑断裂为西北缘逆冲构造南北方向分段的主要断裂,并控制了西北缘中生代地层的沉积。西北缘构造是形成于主边界断裂的斜向挤压作用,而基底卷入逆冲断裂则属非纯挤压形成的逆冲构造。     

AGE OF THE ALTYN TAGH STRIKE—SLIP FAULT

AGE OF THE ALTYN TAGH STRIKE—SLIP FAULT