鄂尔多斯西缘褶皱—逆冲断层带的构造特征和找气前景

野外地质观察和地震反射剖面分析表明,鄂尔多斯西缘褶皱山系和覆盖地区发育北东、北西向褶皱和西倾东冲的逆冲断层,组成褶皱—逆冲断层带。按其构造特征可归纳为以下六种类型: 1.褶皱—逆冲断层型 以桌子山褶皱—逆冲断层带为代表,构造特征为轴面西倾的不对称背向斜,逆冲断层发生在背斜陡翼上。 2.褶皱—逆冲推覆型 以小松山逆冲断层和推覆体为代表,构造特征为断面西倾东冲的逆冲断层,其上盘呈弧形突出,覆盖在下盘年轻的褶皱地层之上。 3.褶皱—犁式逆冲断层型 其典型地区是大、小罗山至马家滩地区,断面西倾东冲,上陡下缓呈犁式和坐椅式。 4.同沉积逆冲断层型 以铁克苏庙逆冲断层和其控制发育的深凹陷为代表。 5.同生基底正断层反转逆冲型 以西来蜂逆冲断层和北西向“河西系”逆冲断层为代表。 6.反向逆断层型 以断面东倾高角度呈叠瓦状错列的横山堡地区为代表。 初步认为,鄂尔多斯西缘褶皱—逆冲断层带的区域背景与A-俯冲作用有关的逆冲断层带有较大的差异,它们是在克拉通内地壳拆离作用的产物,其逆冲—推覆规模和缩短程度比A-俯冲带低, 鄂尔多斯西缘褶皱—逆冲断层的形成主要受侧向挤压力的控制。其形成方式有:（1）由于纵弯作用,先形成褶皱后产生逆冲断层。（2）受侧向挤压沿早期正断层逆转形成逆冲断层?     

柴达木盆地北缘第四纪左旋斜冲推覆构造运动

柴达木盆地北缘第四纪发育比较强烈的左旋斜冲构造运动,形成长达百余公里、宽度超过30km的大型推覆构造,由斜冲断层、逆冲岩席和褶皱构造等组成。根据野外观测相关资料,柴达木盆地北缘第四纪发生两期构造变形： 早更新世不同规模的逆冲岩席如中新元古代中深变质岩、古生代浅变质岩与中生代沉积地层沿北西西－北西向断层发生左旋斜冲构造运动,导致下伏中新统和上新统湖相沉积地层强烈褶皱变形,上覆不同规模的逆冲岩席; 晚更新世中晚期构造运动导致中晚更新世砾石层发生宽缓褶皱变形。估算柴达木盆地北缘第四纪斜冲推覆构造运动产生的最小缩短量约为 17～18km,平均缩短速率约为 6.6～6.9mm/a。柴达木盆地北缘第四纪斜冲推覆构造运动是青藏高原北部新生代逆冲推覆构造运动自南向北扩展迁移的重要表现形式。     

鄂尔多斯西缘北段大型陆缘逆冲推覆体系

鄂尔多斯西缘北段是一个自中生代末以来形成的、结晶基底和早古生代大陆边缘沉积盖层同时卷入的巨型陆缘逆冲推覆构造体系。根据区域地层发育、变形岩石属性、冲断层几何学以及它们与联冲断层的关系,大体上可以分为不同形成阶段的3个冲断层构造组合,包括9个次级构造单元(B₁—B₇,B_N,B_S)。受冲断层运动自西向东的一致推进,整体呈现一个局部被近东西走向联冲断层切错、向东凸出的弧形:前端为陆缘褶皱冲断带;中部表现为一系列"原地"或"异地"推覆体和冲断席,发育低角度滑脱层和双冲构造;后部又被最晚期的冲断体叠置。侏罗-白垩纪为逆冲推覆构造的主要发展阶段,经历了3期主要的冲断层作用。第Ⅰ期发生在侏罗纪末,沿阿拉善—华北两类不同性质结晶基底之间的主滑脱面发生大规模冲断层作用,形成桌子山—岗德尔山褶皱冲断带。第Ⅱ期冲断层作用的持续位移,形成了具有上、下两个构造层的石嘴山—尖山大型异地推覆体,主滑脱面为石炭纪煤系地层,其中发育典型的双冲构造。新生代(距今65Ma)以来,印度—欧亚板块挤压碰撞和青藏高原早期向北推挤,加剧了鄂尔多斯西缘逆冲推覆构造的进一步发育,第Ⅲ期冲断层作用在东部陆缘褶皱冲断带形成了苏海图反冲构造的同时,在西部将异地推覆体下部的奥陶系再次推至地表。第Ⅰ期和第Ⅱ期冲断层作用累计位移幅度可能达到60~80km,第Ⅲ期冲断层作用的位移幅度为8km。相邻冲断席之间位移矢量的差异,通过近东西走向的联冲断层得到了调整。     

青藏高原中部色林错—伦坡拉逆冲推覆构造系统

通过野外地质观测结合地震反射剖面综合构造解释,在青藏高原中部色林错—伦坡拉古近纪沉积凹陷及邻区厘定3条较大规模的逆冲推覆构造,由逆冲断层、逆冲岩席、飞来峰、构造窗及伴生褶皱组成。沿班公—怒江缝合带发育赛布错—扎加藏布逆冲推覆构造,伦坡拉盆地北部发育双重推覆构造,拉萨地块北缘发育色林错—吴如错逆冲推覆构造,估算推覆距离分别为38~50 km。羌塘地块南缘自北向南逆冲推覆,拉萨地块北缘自南向北逆冲推覆,两者对冲导致色林错古近纪盆地及沉积地层发生比较强烈的褶皱变形,形成宽约20 km大型向斜构造。色林错—伦坡拉逆冲推覆构造运动开始时间为晚白垩世晚期,古近纪不同时期均发育逆冲断层,前锋逆冲断层和底部拆离滑脱构造主要形成时期为古近纪晚期—中新世早期。古近纪逆冲推覆构造对伦坡拉和色林错河湖相沉积盆地、烃源岩形成演化、油气成藏及保存条件具有显著控制作用。     

青藏高原羌塘盆地南部古近纪逆冲推覆构造系统

西藏羌塘地块南部古近纪发育肖茶卡-双湖逆冲推覆构造、多玛-其香错逆冲推覆构造、赛布错-扎加藏布逆冲推覆构造,构成古近纪大型逆冲推覆构造系统。沿逆冲推覆构造的前锋断层,二叠系白云岩与大理岩化灰岩、三叠系砂岩与页岩、侏罗系碎屑岩与碳酸盐岩和三叠纪—侏罗纪蛇绿岩自北向南逆冲推覆于古近纪红色砂砾岩之上,形成规模不等的构造岩片与飞来峰。羌塘盆地南部主要的逆冲断层和下伏的褶皱红层被中新世湖相沉积地层角度不整合覆盖,表明逆冲推覆构造运动自中新世以来基本停止活动。羌塘盆地南部古近纪逆冲推覆构造运动在近南北方向产生的最小位移为90km,指示新生代早期上地壳缩短率约为47%。古近纪逆冲推覆构造对羌塘盆地油气资源具有重要影响。     

帕米尔-西昆仑北麓新生代前陆褶皱冲断带构造剖面分析

依据帕米尔—西昆仑北麓新生代前陆褶皱冲断带 3条构造剖面的详细分析,发现帕米尔—西昆仑北麓除山根地带发育高角度断层外,基本上以低角度逆掩断层为主,形成与逆冲推覆构造相关的褶皱变形。乌泊尔地区表现为由山脉向塔里木盆地滑移的隐伏冲断层和上覆褶皱;苏盖特—齐姆根—甫沙地区表现为山前的三角带和向盆地扩展的两排背斜带。帕米尔—西昆仑北麓前陆褶皱冲断带的主要构造变形时间始于上新世早期(距今约 4.6Ma),断层、褶皱的变形时代由山前向盆地逐步变新,变形强度由山脉向塔里木盆地逐步减弱。帕米尔—西昆仑北麓前陆褶皱冲断带的构造缩短量为 20～70km,缩短率为 35%～50%。     

帕米尔弧东段逆冲推覆构造特征

帕米尔弧形构造带是青藏高原碰撞挤压表现最明显的地区之一。通过构造剖面和地震剖面解释,认为帕米尔弧东段逆冲推覆构造具有分带性特点,自南西向北东方向可以划分为逆冲推覆构造的根带、中带、锋带与锋前带,相应地发育叠瓦状逆冲断层、冲断褶皱、断层相关褶皱、单斜构造等不同的构造组合。对逆冲推覆锋带中苏盖特和阿克陶生长背斜、生长地层及形成时序分别进行了研究,确定了帕米尔弧形逆冲推覆构造以前展式（背驮式）向前陆方向扩展,逆冲推覆始于上新世,并一直持续到早更新世。弧形构造东西两段逆冲推覆运动方式和地层缩短量有很大差异：西段为与挤压方向垂直的逆冲,而东段为斜冲兼顺时针走滑;西段地层缩短量大于东段。     

黔南地区古生代正断层对构造特征的制约

黔南地区发育东西向的古生代正断层以及南北向的中、新生代逆冲断层和褶皱。通过对地层、褶皱和断层的平面展布、野外地质调查以及地震剖面的解释,结合雪峰隆起的逆冲推覆特征,研究黔南地区古生代正断层对构造特征的制约作用。研究结果表明东西向的古生代正断层在中、新生代的构造变形过程中起构造转换带的作用。通过建立区内构造转换带的几何学模型,对地震线上的构造变形特征进行了解释。在构造转换带（正断层）附近,断层上盘逆冲推覆不明显;在远离断层处,逆冲断层和与断层相关的褶皱发育。随着距离断层面越来越远,构造转换带（正断层）下盘地层的逆冲推覆特征逐渐消失。     

藏北改则新生代早期逆冲推覆构造系统

藏北改则及邻区新生代早期发育大型逆冲推覆构造系统,由不同方向的逆冲断层、不同时代的构造岩片、不同规模的飞来峰和构造窗、不同类型的褶皱构造组成。羌塘中部发育羌中薄皮推覆构造,石炭系板岩和二叠系白云质灰岩自北向南逆冲推覆于上白垩统与古近系红层之上,形成大型逆冲岩席和弧形逆冲断层,原地系统古近纪红层下伏三叠系—侏罗系海相烃源岩。羌塘南部发育南羌塘薄皮推覆构造,导致班公—怒江蛇绿岩、三叠系—侏罗系海相地层及侏罗纪混杂岩自北向南逆冲推覆于古近纪红层与下白垩统海相沉积岩层之上,形成三条蛇绿岩片带、大量飞来峰和厚度较大的构造片岩。中新世早期火山岩层和湖相沉积呈角度不整合覆盖逆冲断层、褶皱构造和逆冲岩席,不整合面上覆火山岩年龄为23.7～19.1Ma,指示中新世早期改则及邻区基本结束了强烈逆冲推覆构造运动。估算羌中逆冲推覆构造的推覆距离约100～115km,南羌塘逆冲推覆构造的推覆距离约82～110km;新生代早期改则逆冲推覆构造系统近南北方向逆冲推覆总距离为182～225km,对应地壳缩短率为(50.3±2.7)%。     

论内蒙古大青山地区逆冲推覆构造

大青山逆冲推覆构造发育在石拐断陷盆地南侧,由一系列规模大小不等向南倾的叠瓦状逆冲推覆断层构成,由南南西向北北东方向推覆,是单冲型逆冲推覆构造。由北向南分为前缘挤压滑脱构造带、斜歪倒转褶皱—逆冲断层带和逆冲推覆岩席及叠瓦状逆冲断层带。     

鄂尔多斯盆地西缘中部微小断层的成因机制与控藏特征

鄂尔多斯盆地西缘作为南北构造带的一部分,不仅是研究该盆地形成、演化及油气成藏的重要窗口,也是探讨中生代特提斯洋关闭、新生代青藏高原隆升的热点地区。本文将盆地西缘中部及以东的新生界覆盖区作为一个整体,利用二维和三维地震资料进行精细构造解释,在天环坳陷中生界发现大量微小断层。地震解释表明：地震剖面上,微小断层具有正、逆断层并存,切穿层位差异大,挤压褶皱相伴生的特点;平面上,微小断层呈北西西—南东东向规律性展布,与西部前缘带的大型断层共同构成扫帚状展布的断层发育带。晚侏罗世燕山运动主幕,北东东向构造挤压应力由南向北传递,由于受东西向横向构造转换带的阻挡,在本区产生压扭作用,微小断层的形成受此压扭作用控制。微小断层形成后,主要经历了早白垩世伸展作用和晚白垩世—至今的后期改造。依据断层切穿的层位及改造阶段,将微小断层划分为3个期次,井震联合分析认为：Ⅰ期断层主要改善了延长组致密储层的物性,一般在延长组内部成藏;Ⅱ期断层主要促进了石油的运移,在延长组和延安组均能成藏;Ⅲ期断层对早期油藏具有一定的破坏作用。     

鄂尔多斯盆地南缘寒武纪同沉积伸展断裂系统及其成因机制分析

由于复杂的构造叠加及严重的覆盖,人们对鄂尔多斯盆地早古生代深部结构的研究仍很薄弱。本文主要通过地震数据处理和解释,结合野外地质调查,发现在寒武纪时期,盆地的南缘发育了一套北东向和近东西向的正断裂系统。作者对这套断裂系统的平面及剖面特征进行了详细的描述和分析,并结合区域地质背景探讨了其成因机制,结果表明该套断裂系统主要是由于先存的元古宙北东向基底断层在寒武纪时期发生了继承性活动而形成,同时在断裂系统的局部区段派生出了东西向展布的小规模新生断层。这套断裂系统的发现可能对鄂尔多斯盆地南缘在寒武纪的演化认识及油气勘探具有一定的启示意义。     

富蕴地区阿尔泰造山带有限应变测量和应变恢复

本文采用褶皱等倾线法，砾石三维应变和S－C夹角等应变测量方法，对富蕴地区阿尔泰造山带一个50km的剖面进行了系统的有限应变测算，得出其顺层缩短和剪应变剖面图，测量结果表明，该剖面褶皱压扁的顺层缩短最高达78％，断层处的剪应变（γ）最大可达8左右，三维应变分析和Finn图解表明该区应变主要为平面应变，断层活动为简单剪切，利用分段积分和正态曲线恢复方法对剖面的缩短和剪切进行应变恢复，结果表明该剖面由原宽为267.2km的原始剖面经缩短和剪切而形成。     

柴达木盆地西部地区晚新生代构造变形及其意义

青藏高原东北缘构造变形研究是认识整个青藏高原隆升过程、机制以及印欧板块碰撞远程效应的重要途径。受控于昆仑山断裂、阿尔金断裂、祁连山断裂的柴达木盆地,新生代地层发育,较完整地记录了高原东北缘的构造变形信息。尤其柴达木盆地西部地区,构造变形强烈,晚新生代地层出露完整,是研究其晚新生代构造变形历史及驱动机制的理想地区。文中应用平衡剖面和古地磁构造旋转方法,结合最新的磁性地层年代,定量恢复该地区的构造变形历史。结果表明,在挤压应力的控制下该地区自22 Ma以来,构造变形主要表现为地层缩短与构造旋转,且其强度呈阶段性增长,具体又可划分为3个阶段：22~9.1 Ma构造活动平静期、9.1~2.65 Ma构造变形相对加强期、2.65 Ma以来构造变形顶峰期。研究表明,造成柴西地区地层持续缩短和顺时针旋转的关键推动力是印欧板块晚新生代的持续向北推挤、昆仑山-祁曼塔格山向柴达木盆地强烈挤压推覆以及阿尔金左旋走滑断裂大规模的复活。     

Balanced cross-section restoration in a complicated folded hinterland structure: Shilbilisaj profile,Talas ridge,Caledonian Tien Shan

Conventional cross-section balancing techniques based on layer length measuring can be applied only for foreland structures. To analyse complicated hinterland structure with numerous small-scale folds, this balancing technique requires the reliable and detailed tracing of the morphology of any layer throughout the cross-section, which is unattainable. We present a special kinematic method of balancing cross sections based “on the geometry of the folded domain” which enables the structural restoration of hinterland regions. We apply the method to restore the detailed structural section along the Shilbilisaj River, having a length of 26 km. We divided this section into 40–60 so-called “domains” each including 2–7 folds. Our method uses the fold's morphology to determine the strain ellipsoid, which describes the deformation of each domain and is used to restore its pre-folded state. By combining the pre-folded states of the domains, we reconstruct the entire profile, and calculate shortening values as K = L₀/L₁ (initial to final length). The overall shortening value for the profile is 4.49, incrementally varying along the section from 3.79 to 5.53. The comparable results of two independently performed reconstructions emphasize the reliability of the applied balancing method.     

Transverse fold evolution in the External Sierra,southern Pyrenees,Spain

Fault-slip data are used to reconstruct varying tectonic regimes associated with transverse fold development along the eastern and southern margins of the Jaca basin, southern Pyrenees, Spain. The Spanish Pyrenean foreland consists of thrust sheets and leading-edge décollement folds which developed within piggyback basins. Guara Formation limestones on the margins of the Jaca basin were deposited synchronously with deformation and are exposed in the External Sierra. Within the transverse folds, principal shortening axes determined from P and T dihedra plots of fault-slip data show a shift from steep shortening in stratigraphically older beds to NNE–SSW horizontal shortening in younger beds. Older strata are characterized by extensional faults interpreted to result from halotectonic (salt tectonics) deformation, whereas younger strata are characterized by contraction and strike-slip faults interpreted to result from thrust sheet emplacement. The interpretation of the timing for the shortening axes in the younger strata is supported by the observation that these axes are parallel to shortening axes determined from finite strain analysis, calcite twins, and regional thrusting directions determined from fault-related folds and slickenlines. This study shows that fault population analysis in syntectonic strata provides an opportunity to constrain kinematic evolution during orogeny.     

The Interrelationship of Micro-Meso and Macroscopic Structures on the Western Limb of the Hazara Kashmir Syntaxis, Pakistan

Detailed micro-meso to macroscopic structural analyses reveal two deformation phases in the western limb of the Hazara-Kashmir Syntaxis(HKS). Bulk top to NW shearing transformed initially symmetrical NNE-SSW trending meso to macroscopic folds from asymmetric to overturned ones without changing their trend. Sigmoidal en-echelon tension gashes developed during this deformation,that were oblique to bedding parallel worm burrows and bedding planes themselves. Strain analyses of deformed elliptical ooids using the R_f/φ method constrain the internal strain patterns of the NNE-SSW structures. The principal stretching axis(S_3) defined by deformed elliptical ooids is oriented N27°E at right angles to WNW-ESE shortening. The deformed elliptical ooids in sub-vertical bedding vertical planes contain ooids that plunge ~70° SE due to NW-directed tectonic transport. Finite strain ratios are1.45(R_(xy)) parallel to bedding plane and 1.46(R_(yz)) for the vertical plane. From these 2D strain values, we derive an oblate strain ellipsoidal in 3D using the Flinn and Hsu/Nadai techniques. Strains calculated from deformed elliptical ooids average-18.10% parallel to bedding and-18.47% in the vertical plane.However, a balanced cross-section through the study area indicates a minimum of~-28% shortening.Consequently, regional shortening was only partially accommodated by internal deformation.     

琼东南盆地新生代伸展量的时空分布研究

以琼东南盆地新生代20条骨干地震剖面的构造解释为基础,利用平衡剖面技术计算了各剖面不同位置的伸展量、伸展率和伸展系数,并分析了伸展量的时空分布规律。同时采用分形法对平衡剖面技术所得到的伸展量产生的差值进行补偿分析,以验证平衡剖面技术在琼东南盆地的适应性。研究表明,琼东南盆地新生代具有多期伸展特点,伸展量时空分布不均匀。空间上,伸展量主要由盆地主控断层位移造成,主控断层位移较大处对应的伸展量大,盆地东区伸展率高于西区;时间上,水平伸展运动可分为始新世、渐新世和中新世3个时期,水平伸展量分布不均匀,伸展量主要发生在陵水和崖城组时期。其中,始新世伸展主要发生在乐东长昌凹陷,渐新世伸展主要发生在盆地中部。     

Neotectonics of the Somogy hills (Part II): Evidence from seismic sections

The Somogy hills are located in the Pannonian Basin, south of Lake Balaton, Hungary, above several important tectonic zones. Analysis of industrial seismic lines shows that the pre-Late Miocene substratum is deformed by several thrust faults and a transpressive flower structure. Basement is composed of slices of various Palaeo-Mesozoic rocks, overlain by sometimes preserved Paleogene, thick Early Miocene deposits. Middle Miocene, partly overlying a post-thrusting unconformity, partly affected by the thrusts, is also present. Late Miocene thick basin-fill forms onlapping strata above a gentle paleo-topography, and it is also folded into broad anticlines and synclines. These folds are thought to be born of blind fault reactivation of older thrusts. Topography follows the reactivated fold pattern, especially in the central-western part of the study area.

The map pattern of basement structures shows an eastern area, where NE–SW striking thrusts, folds and steep normal faults dominate, and a western one, where E–W striking thrusts and folds dominate. Folds in Late Neogene are also parallel to these directions. A NE–SW striking linear normal fault and associated N–S faults cut the highest reflectors. The NE–SW fault is probably a left-lateral master fault acting during–after Late Miocene. Gravity anomaly and Pleistocene surface uplift maps show a very good correlation to the mapped structures. All these observations suggest that the main Early Miocene shortening was renewed during the Middle and Late Miocene, and may still persist.

Two types of deformational pattern may explain the structural and topographic features. A NW–SE shortening creates right-lateral slip along E–W faults, and overthrusts on NE–SW striking ones. Another, NNE–SSW shortening creates thrusting and uplift along E–W striking faults and transtensive left-lateral slip along NE–SW striking ones. Traces of both deformation patterns can be found in Quaternary exposures and they seem to be consistent with the present day stress orientations of the Pannonian Basin, too. The alternation of stress fields and multiple reactivation of the older fault sets is thought to be caused by the northwards translation and counter-clockwise rotation of Adria and the continental extrusion generated by this convergence.