分布热源作用下单裂隙岩体三维水流-传热的半解析计算方法

针对高放射性核废物地下处置库近场饱和裂隙岩体环境,提出一种由分布热源、饱和单裂隙和两侧无限大岩石构成的三维水流-传热简化模型,建立了控制微分方程和基于拉氏变换域格林函数的积分方程;采用矩形单元把裂隙面域离散化,利用极坐标下的解析方法计算包含奇点的单元积分,利用数值方法计算分布热源和不包含奇点的单元积分,建立拉氏变换域的线性代数方程组,求解后,利用拉氏数值逆变换,计算任意时刻裂隙水和岩石的温度分布。对两个无内热源、流场确定的计算模型进行了计算,与仅考虑岩石沿裂隙面法向一维热传导的解析解进行了对比。计算分析了分布热源作用下饱和单裂隙岩体的三维水流-传热特征及其对裂隙水流速、岩石热传导系数和热源热流集度的敏感度。计算结果表明：与直接采用高斯数值积分相比,提出的解析法奇异积分精度较高;就裂隙水温度而言,单裂隙岩体三维水流-传热半解析计算方法与解析法得到的结果基本一致,但由于半解析计算方法考虑了岩石的三维热传导,使得裂隙水的上游温度较低,而下游温度较高;无分布热源作用时,岩石热传导系数越大,裂隙水温度越低;裂隙水流速越大,裂隙进水温度对裂隙水和岩石温度分布的影响越明显;由于受到裂隙水流动传热的作用,分布热源对裂隙水温度和岩石温度的影响在裂隙水流的下游区域比较显著。     

米尺度裂隙岩体模型水流-传热试验的数值模拟分析

为了研究高放射性核废物地下处置库近场的水流-传热耦合问题,采用国内高放废物地下处置库预选场址--甘肃北山地区的花岗岩石块体,加工组合成米尺度的规则裂隙岩体模型,设置边界热源和裂隙水流,试验模拟裂隙水水流与传热之间的相互作用。作为该室内模型试验的前期理论研究,采用等效孔隙介质数值模型,着重分析了裂隙开度、裂隙流量和热源功率对流场和温度场的影响。在设定条件下,计算分析表明：热传导和裂隙水水流由热源作用初期的不耦合很快转化为耦合;不流动的裂隙水主要表现为热存储和热传导,而流动的裂隙水还引起流动传热和水与岩石之间的对流换热,使岩体温度场明显不同于单纯热传导的情况;如果保持裂隙水流量不变,则裂隙开度的变化对水流-传热影响不大;如果保持裂隙水流速不变,则裂隙开度的变化对水流-传热影响显著;热源功率越大,通过裂隙水的热流量越大,裂隙水压强越大,而当温度超过100 ℃时,裂隙水会因汽化而压强显著增大;加热7 d时,热量的输入和输出几乎相等,裂隙水流带走的热量接近热源供给的热量,模型系统基本达到了热平衡。     

分布热源作用下裂隙岩体渗流-传热的拉氏变换-格林函数半解析计算方法

以裂隙岩体高放射性核废物地下处置库性能评估为目标,提出了分布热源作用下单裂隙岩体渗流-传热的简化概念模型、控制微分方程和拉氏变换-格林函数半解析法,为进一步采用半解析法计算分布热源作用下多裂隙岩体的渗流-传热问题奠定了基础。针对单裂隙岩体的渗流-传热问题,建立考虑岩石内热源和二维热传导的控制微分方程,利用拉氏变换域微分方程的基本解建立格林函数积分方程,采用解析法处理其中的奇点,通过数值积分和拉氏数值逆变换求解,计算任意时刻裂隙水和岩石的温度分布。通过算例,与基于岩石一维热传导假定的解析解进行了对比,并计算分析了分布热源作用下单裂隙岩体的渗流-传热特征及其对裂隙开度、岩石热传导系数和热流集度的敏感度。算例表明,（1）就裂隙水温度而言,由于考虑了岩石的二维热传导,拉氏变换-格林函数半解析解小于基于岩石一维热传导假定的解析解;（2）裂隙水温度和岩石温度对裂隙开度和热流集度的敏感度较大,对岩石热传导系数的敏感度较小。     

A 2D coupled hydro-thermal model for the combined finite-discrete element method

Based on the combined finite-discrete element method (FDEM), a two-dimensional coupled hydro-thermal model is proposed. This model can simulate fluid flow and heat transfer in rock masses with arbitrary complex fracture networks. The model consists of three parts: a heat conduction model of the rock matrix, a heat-transfer model of the fluid in the fracture (including the heat conduction and convection of fluid), and a heat exchange model between the fluid and rock at the fracture surface. Three examples with analytical solutions are given to verify the correctness of the coupled model. Finally, the coupled model is applied to hydro-thermal coupling simulations of a rock mass with a fracture network. The temperature field evolution, the effect of thermal conductivity of the rock matrix thermal conductivity and the fracture aperture on the outlet temperature are studied. The coupled model presented in this paper will enable the application of FDEM to study rock rupture driven by the effect of hydro-thermo-mechanical coupling in geomaterials such as in geothermal systems, petroleum engineering, environmental engineering and nuclear waste geological storage.

     

低温裂隙岩体水-热耦合模型研究及数值分析

裂隙渗流会引起裂隙周围岩体中的温度场变化,在低温岩体中其影响更为明显;此外,裂隙水与周围低温岩石介质发生热交换会引起裂隙中的水冰相变过程发生,而裂隙水冻结将阻碍裂隙渗流,引起裂隙渗流场的变化。因此,低温下的裂隙岩体水-热相互作用是一个强耦合过程。考虑裂隙中的水冰相变过程和渗流作用,建立了低温冻结条件下裂隙岩体水-热耦合模型;以冻结法施工为例,考察了低温冻结过程中裂隙水渗流对裂隙冻结交圈的影响。研究结果表明：由于裂隙渗流的存在,距裂隙较远处岩石先冻结,裂隙冻结所需时间远大于周围岩石;裂隙宽度和裂隙水压力差都会影响冻结交圈时间,裂隙越宽、水压力差越大,裂隙冻结需要时间越长;随着冻结时间的推进,裂隙水渗流速度逐渐降低,当裂隙冻结后裂隙渗流停止。最后通过构建随机裂隙网络模型,利用所建立的水-热耦合模型考察了裂隙网络渗流对冻结交圈的影响,说明了在冻结法施工中考虑裂隙的重要性。     

裂隙岩体不稳定温度场的复合单元算法研究

基于复合单元法,结合三维热传导-对流方程和“充填模型”,提出了裂隙岩体不稳定温度场的复合单元模型。该模型前处理简便快捷,计算网格生成时无需考虑裂隙的存在,网格剖分不受限制,随后利用复合单元前处理程序,依据裂隙的位置和方位将其自动离散在单元内。对常规热传导-对流方程进行自伴随性调整,应用变分原理,推导出裂隙岩体不稳定温度场的复合单元算法,该算法可分别计算出岩块子单元和裂隙的温度值,且可真实反映裂隙中水流与相邻岩块间的热能量交换规律。将复合单元数值模型计算的不稳定温度场结果与相应的实测数据进行对比分析可知,数值计算结果与实测数据基本一致,验证了裂隙岩体不稳定温度场复合单元算法的可靠性与有效性。算例分析表明,裂隙中水流与相邻岩块间有明显的热传导和热对流作用。     

基于DDA方法一种流-固耦合模型的建立及裂隙体渗流场分析和应用

以非连续变形分析方法（DDA）为基础并采用稳态流体计算方法将二者结合进行裂隙岩体流-固耦合分析。利用DDA方法生成裂隙岩体模型,在此基础上采用矩阵搜索等方法形成新的裂隙水通网络模型。采用稳态迭代算法和立方定律求得裂隙水压力,并把裂隙水压力作为线载荷施加到块体边界,在DDA算法中每个迭代步完成后更新裂隙开度和水压值,与DDA算法结合研究裂隙水与块体之间相互作用关系。利用以上裂隙岩体流-固耦合计算方法研究了某水封油库开挖和运行过程洞室围岩流量和密封性,为该工程预测水封效果提供了有益的主要依据,也是国内首次采用DDA方法做大型工程的流-固耦合模型分析。     

Simulations of hydro-fracking in rock mass at meso-scale using fully coupled DEM/CFD approach

The paper deals with two-dimensional (2D) numerical modelling of hydro-fracking (hydraulic fracturing) in rocks at the meso-scale. A numerical model was developed to characterize the properties of fluid-driven fractures in rocks by combining the discrete element method (DEM) with computational fluid dynamics (CFD). The mechanical behaviour of the rock matrix was simulated with DEM and the behaviour of the fracturing fluid flow in newly developed and pre-existing fractures with CFD. The changes in the void geometry in the rock matrix were taken into account. The initial 2D hydro-fracking simulation tests were carried out for a rock segment under biaxial compression with one injection slot in order to validate the numerical model. The qualitative effect of several parameters on the propagation of a hydraulic fracture was studied: initial porosity of the rock matrix, dynamic viscosity of the fracking fluid, rock strength and pre-existing fracture. The characteristic features of a fractured rock mass due to a high-pressure injection of fluid were realistically modelled by the proposed coupled approach.

     

Hybrid analytical and finite element numerical modeling of mass and heat transport in fractured rocks with matrix diffusion

Quantification of mass and heat transport in fractured porous rocks is important to areas such as contaminant transport, storage and release in fractured rock aquifers, the migration and sorption of radioactive nuclides from waste depositories, and the characterization of engineered heat exchangers in the context of enhanced geothermal systems. The large difference between flow and transport characteristics in fractures and in the surrounding matrix rock means models of such systems are forced to make a number of simplifications. Analytical approaches assume a homogeneous system, numerical approaches address the scale at which a process is operating, but may lose individual important processes due to averaging considerations. Numerical stability criteria limit the contrasts possible in defining material properties. Here, a hybrid analytical–numerical method for transport modeling in fractured media is presented. This method combines a numerical model for flow and transport in a heterogeneous fracture and an analytical solution for matrix diffusion. By linking the two types of model, the advantages of both methods can be combined. The methodology as well as the mathematical background are developed, verified for simple geometries, and applied to fractures representing experimental field conditions in the Grimsel rock laboratory.     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。     

A semi‐analytical modeling approach for three‐dimensional heat transfer in sparsely fractured rocks with water flow and distributed heat source

A semi‐analytical approach is developed for modeling 3D heat transfer in sparsely fractured rocks with prescribed water flow and heat source. The governing differential equations are formulated, and the corresponding integral equations over the fracture faces and the distributed heat source are established in the Laplace transformed domain using the Green function method with local systems of coordinates. The algebraic equations of the Laplace transformed temperatures of water in the fractures are formed by dividing the integrals into elemental ones; in particular, the fracture faces are discretized into rectangular elements, over which the integrations are carried out either analytically for singular integrals when the base point is involved or numerically for regular integrals when otherwise. The solutions of the algebraic equations are inverted numerically to obtain the real‐time temperatures of water in the fractures, which may be employed to calculate the temperatures at prescribed locations of the rock matrix. Three example calculations are presented to illustrate the workability of the developed approach. The calculations found that water flux in the fractures may decrease the rate of temperature rise in regions close to the distributed heat source and increase the rate of temperature rise in regions downstream away from the distributed heat source and that the temperature distribution and evolvement in a sparsely fractured rock mass may be significantly influenced by water flow exchange at intersection of fractures. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of flow velocity on conservative solute transport in sets of parallel fractures with fracture skin

Analysis of contaminant transport through fractured crystalline rocks has received considerable attention, particularly with regard to subsurface nuclear waste repositories. Most of the studies have employed the dual continuum approach, with the fractures and the rock matrix as the two continuums, assuming that fractures control the overall conductivity of the rock and the porous matrix just provides storage. However, field observations of rock fractures have shown that the real situation can be very complex. Based on some recent investigations, it has been reported that the portion of the rock matrix adjacent to many open fractures is physically and chemically altered. These alterations, referred to as the fracture skin, can have different sorption and diffusion properties compared to those of the undisturbed rock matrix and this may influence the transport of solutes through such formations. In the present study, a numerical model is developed to simulate conservative solute transport in a fractured crystalline rock formation using the triple continuum approach ?? with the fracture, fracture skin and the rock matrix as the three continuums. The model is solved using a fully implicit finite difference scheme. Contaminant migration in the fractured formation with and without skin has been simulated. It is observed that contaminant penetration along the fracture is enhanced at large flow velocities. The effect of flow velocity on conservative solute transport is investigated for different fracture apertures and fracture skin thicknesses. The influence of flow velocity on contaminant transport is demonstrated to be more with change in fracture aperture than with change in skin thickness.     

稀疏不规则裂隙岩体模型三维水流-传热对温度和应力影响的试验研究

选取高放射核废物处置库重要预选场区甘肃北山地区的花岗岩,制作750 mm（宽）×300 mm（厚）×1 000 mm（高）的稀疏不规则裂隙岩体模型,该模型由18块花岗岩和竖向与斜向各两条裂隙组成,在裂隙及岩石内部埋置温度传感器、水压计、直角应变花,并在模型一侧设置局部热源,研究热源温度和裂隙水流速对岩石温度和应力的影响。结果表明,竖裂隙水主要从顶部进水口流向底部出水口,斜裂隙水主要从侧部进水口流向侧部出水口,竖裂隙与斜裂隙在交汇处存在微小流量交换;由于热源处在两条斜裂隙进水口之间,并且斜裂隙长度小于竖裂隙,岩石热传导与斜裂隙水流对岩石温度分布起控制作用,竖裂隙水流对岩石横向热传导起阻滞作用;由于热传导和水流传热的不规则性,上层岩石形成从左向右为主的传热路径,中层和下层岩石形成从上向下为主的传热路径;由于上、下层岩石温度梯度较小,岩石收缩受热拉应力,而中层岩石温度梯度较大,岩石膨胀受热压应力,大主应力的方向大致垂直于斜裂隙面与竖裂隙面的交线,岩石应力增量随斜平面方向的温度梯度增大而增大;热源温度越高,裂隙水流速越低,岩石温度越高、岩石应力越大,系统达到稳态需要的时间越长。     

A 2D mixed fracture–pore seepage model and hydromechanical coupling for fractured porous media

A novel two-dimensional mixed fracture–pore seepage model for fluid flow in fractured porous media is presented based on the computational framework of finite-discrete element method (FDEM). The model consists of a porous seepage model in triangular elements bonded by unbroken joint elements, as well as a fracture seepage model in broken joint elements. The principle for determining the fluid exchange coefficient of the unbroken joint element is provided to ensure numerical accuracy and efficiency. The mixed fracture–pore seepage model provides a simple but effective tool for solving fluid flow in fractured porous media. In this paper, examples of 1D and 2D seepage flow in porous media and porous media with a single fracture or multiple fractures are studied. The simulation results of the model match well with theoretical solutions or results obtained by commercial software, which verifies the correctness of the mixed fracture–pore seepage model. Furthermore, combining FDEM mechanical calculation and the mixed fracture–pore seepage model, a coupled hydromechanical model is built to simulate fluid-driven dynamic propagation of cracks in the porous media, as well as its influence on pore seepage and fracture seepage.

     

Isotopic effects in fracture-dominated reactive fluid-rock systems

A mathematical model is presented that describes the effects of pore fluid aqueous diffusion and reaction rate on the isotopic exchange between fluids and rocks in reactive geo-hydrological systems where flow is primarily through fractures. The model describes a simple system with parallel equidistant fractures, and chemical transport in the matrix slabs between fractures by aqueous diffusion through a stagnant pore fluid. The solid matrix exchanges isotopes with pore fluid by solution-precipitation at a rate characterized by a time constant, R (yr⁻¹), which is an adjustable parameter. The effects of reaction on the isotopes of a particular element in the fracture fluid are shown to depend on the ratio of the diffusive reaction length for that element (L) to the fracture spacing (b). The reaction length depends on the solid-fluid exchange rate within the matrix, the partitioning of the element between the matrix pore fluid and the matrix solid phase, the porosity and density of the matrix, and the aqueous diffusivity. For L/b < 0.3, fluid-rock isotopic exchange is effectively reduced by a factor of 2L/b relative to a standard porous flow (single porosity) model. For L/b > 1, the parallel fracture model is no different from a porous flow model. If isotopic data are available for two or more elements with different L values, it may be possible to use the model with appropriate isotopic measurements to estimate the spacing of the primary fluid-carrying fractures in natural fluid-rock systems. Examples are given using Sr and O isotopic data from mid-ocean ridge (MOR) hydrothermal vent fluids and Sr isotopes in groundwater aquifers hosted by fractured basalt. The available data for MOR systems are consistent with average fracture spacing of 1-4 m. The groundwater data suggest larger effective fracture spacing, in the range 50-500 m. In general, for fractured rock systems, the effects of fracture-matrix diffusive exchange must be considered when comparing isotopic exchange effects for different elements, as well as for estimating water age using radioactive and cosmogenic isotopes.     

裂隙岩体流-热耦合传热的三维数值模拟分析

通过对潘西煤矿水文地质条件的分析,基于裂隙岩体的流-热耦合数学模型,描述了裂隙岩体渗流场分布和水流及岩体的温度场分布,并结合边界条件及计算参数对裂隙岩体的流-热耦合传热进行了数值模拟和分析。数值模拟结果表明,岩体内裂隙水流所引发的热量迁移,对裂隙岩体的温度场分布有重要影响。断裂带及地下水流的存在改变了岩体的原有温度场分布。在渗流初期,温度梯度矢量沿渗流方向向两侧岩体方向流动,由于两侧岩体的渗透性系数低于断裂带处的渗透性系数,右侧等温线及温度梯度矢量方向逐渐向渗流方向移动,改变了两侧岩体的温度场分布。通过对断裂带内裂隙水流渗透性系数的折减,分析渗透性系数发生变化时对岩体温度场分布的影响,渗透性系数越大,伴随的热量迁移增大,对岩体的温度场分布的影响也越大。     

三维交叉裂隙渗流传质特性数值模拟

对交叉裂隙渗流传质特性的定量描述是研究整个裂隙网络渗透传质特性的基础。为真实模拟水流及溶质在三维交叉裂隙中的运移过程,首先通过三维轮廓仪获取天然岩石裂隙表面的形貌数据,再应用三维重构技术生成相应的三维交叉裂隙模型,随后求解Navier-Stokes方程,假定溶质运移满足Fick定律,模拟水流和溶质在三维交叉裂隙中的运移过程。通过对比粗糙裂隙模型与平行平板模型的模拟结果发现：粗糙度对流体的分布及流动状态存在显著的影响;不同进、出口工况下的流体流动及溶质运移状态亦表明：裂隙交叉的几何形貌会显著地影响溶质混合行为。这些结果表明,目前被广泛采用的平行平板模型在评估岩体内特别是交叉口的物质运移特性时将导致较大的偏差,在将来的研究中有必要针对裂隙交叉口的几何特征建立修正的模型以提高评估的准确性。     

An Approach for Modeling Rock Discontinuous Mechanical Behavior Under Multiphase Fluid Flow Conditions

In this paper, the two computer codes TOUGH2 and RDCA (for “rock discontinuous cellular automaton”) are integrated for coupled hydromechanical analysis of multiphase fluid flow and discontinuous mechanical behavior in heterogeneous rock. TOUGH2 is a well-established code for geohydrological analysis involving multiphase, multicomponent fluid flow and heat transport; RDCA is a numerical model developed for simulating the nonlinear and discontinuous geomechanical behavior of rock. The RDCA incorporates the discontinuity of a fracture independently of the mesh, such that the fracture can be arbitrarily located within an element, while the fluid pressure calculated by TOUGH2 can be conveniently applied to fracture surfaces. We verify and demonstrate the coupled TOUGH–RDCA simulator by modeling a number of simulation examples related to coupled multiphase flow and geomechanical processes associated with the deep geological storage of carbon dioxide—including modeling of ground surface uplift, stress-dependent permeability, and the coupled multiphase flow and geomechanical behavior of fractures intersecting the caprock.     

壁面局部接触裂隙岩体水流-传热的一种理论模型及计算分析

核废物地质处置、地热开发、石油开采等工程领域都可能涉及稀疏裂隙岩体中的水流-传热过程。现有的裂隙岩体水流-传热理论模型和计算方法基本上都是以平行光滑壁面裂隙模型为基础的,没有考虑裂隙的壁面局部接触对水流、水-岩热交换以及岩体传热的影响。针对粗糙壁面裂隙水流过程,阐述了基于Stokes方程的Reynolds润滑方程及Hele-Shaw裂隙模型,采用MATLAB软件中的PDE工具求解,并与Walsh的等效水力开度公式进行对比;分析壁面局部接触裂隙水流-传热与填充裂隙水流-传热的相似性,提出了瞬时局部热平衡假设的适用条件,并在裂隙局部接触体传热满足Biot数条件的前提下,计算分析裂隙局部接触体与水流之间的局部热平衡时间及其影响因素;在裂隙局部接触体与水流之间满足瞬时热平衡假设的前提下,利用填充裂隙水流-传热的解析解,计算了壁面局部接触裂隙水及两侧岩石的温度分布,并分析了裂隙局部接触面积率、裂隙开度、裂隙水平均流速对岩石温度和裂隙水温度的影响特征,结果表明：（1）在设定条件下,由于裂隙局部接触体与裂隙水流之间的热交换,裂隙水流对其两侧岩石温度的影响范围随接触面积率的增大而减小,裂隙两侧岩石对裂隙水流温度的影响程度随接触面积率的增大而增大;（2）裂隙开度和裂隙水流速对岩石温度和裂隙水温度的影响方式的影响是一致的,即由于裂隙水流量随裂隙开度和裂隙水流速的增大而增大,裂隙水流对其两侧岩石温度的影响范围随裂隙开度和裂隙水流速的增大而增大,裂隙两侧岩石对裂隙水流温度的影响程度随裂隙开度和裂隙水流速的增大而减小。     

Algorithm of Coupled Normal Stress and Fluid Flow in Fractured Rock Mass by the Composite Element Method

This paper presents a composite element algorithm of coupled normal stress and fluid flow process for fractured rock mass, developed from the composite element method (CEM). The coupled relation between the fracture flow and normal stress makes use of the “filled model”, which examines the asperities in the fracture as a layer of granular medium having high porosity and being clipped by the two parallel plates. The existence of fractures is not considered in the mesh generation, but it will be considered explicitly in the mapped composite element. The coupled normal stress and fluid flow process has been simulated by applying a cross iterative algorithm between the two fields. The proposed algorithm considers not only the flow through the fractures, but also the flow exchange between fractures and the surrounding rock blocks. In addition, it can be used for both the filled and non-filled fractures. The verification of the proposed algorithm has been conducted through the illustration of three examples by comparison with the conventional finite element method (FEM), from which the advantages and reliability of the proposed algorithm have been shown clearly.