Sedimentology of a sandur formed by multiple jökulhlaups,Kverkfjöll,Iceland

The Kverkfjöll sandur in north Iceland is the furthest upstream of a suite of fluvial landforms extending for 200 km along the Jökulsá á Fjöllum river. Incision of the sandur exposes over 3 km of sedimentary sections, up to 15 m in height. A sandur wide, well-bedded succession of matrix-rich cobble-gravel and pebble/granule gravel, with individual beds 0.2 to 0.5 m thick indicates that the sandur is primarily the product of sandur-wide sheet-floods, with sediment-rich hyperconcentrated flows and also some debris flows and channelised turbulent flows. This interpretation is evidenced by bedded hyperconcentrated flow deposits occurring as laterally extensive tabular depositional units that dominate the entire sandur, reflecting the unconfined nature of the flow. Clast-supported boulder-gravel units interpreted as the product of macroturbulent flow occur in relatively narrow, but deep channels. The sedimentary succession is interpreted as the product of at least six volcanically generated catastrophic outburst floods (jökulhlaups) during the Little Ice Age. The sedimentology of these Little Ice Age flood deposits, on a small, high-gradient sandur, contrasts strongly with the deposits of volcanically-generated jökulhlaups on large, low-gradient coastal sandar, and sandar associated with retreating glaciers which have been the basis for most previous models of jökulhlaup sedimentation.     

Basic Lithofacies-Succession Model for the Wumishan Cyclothems: Their Markov Chain Analysis and Regularly Vertical Stacking Patterns in the Third-Order Sequences

The Mesoproterozoic Wumishan Formation in the Jixian section of Tianjin is a succession of 3300-m-thick carbonate strata formed in a period of about 100 Ma (1310±20 Ma-1207±10 Ma). In this succession of strata, the carbonate metre-scale cyclic sequences belonging to peritidal type with an approximately symmetrical lithofacies-succession are best developed. The wide development of 1:4 stacking patterns shows that these metre-scale cyclic sequences are genetically related to the short-eccentricity cycles, which are called the Wumishan cyclothems that could truly represent sedimentary cycles. Generally, massive and thick-bedded calcareous dolomites and dolomitic limestones of stromatolite biostromes and thrombolite bioherms constitute the central part of the Wumishan cyclothems. The lower and upper parts consist of tidal flat dolostones, sandy-muddy dolostone and the top part is composed of lagoonal facies dolomitic shales with a paleosol cap. Therefore, an approximately symmetrical lithofacies-successio     

The Late Devensian glaciation along the western margin of the Cheshire-Shroshire Iowland

The glacial succession in the western part of the Cheshire-Shropshire lowland records the advance, coalescence and subsequent uncoupling of Irish Sea and Welsh ice-sheets during the Late Devensian stage. During advance a discontinuous sheet of basal till was emplaced across the floor of the region by subglacial lodgement. On retreat, compression of the Irish Sea ice sheet against bedrock obstruction generated a zone of supraglacial sedimentation resulting in the creation of the Wrexham-Ellesmere-Wem-Whitchurch moraine system, and the formation of a wide range of sedimentary environments, including ice-marginal sandur troughs, ice-front alluvial fans, proglacial ribbon sandur, and subglacial, ice-contact and proglacial lakes. The geometry of sedimentary units, and their lithologic and geomorphic characteristics, display spatially ordered patterns of sediment-landform assemblage which show that the statigraphic succession is a response to rapidly changing depositional conditions at a retreating supraglacial ice-margin punctuated by minor still-stands and ice-front oscillations.     

民和盆地南缘盐锅峡组的建立及其地质意义

民和盆地下白垩统地层出露广泛,在其中部有一整套以水下沉积构造和其中特有的蓝灰色标志层为主体的细碎屑岩系,与上、下地层有着极大差异,命名为“盐锅峡组”。该组地层剖面连续,出露甚好,顶底清楚,具独特的岩性、岩相特征。该组岩石地层单位的正式建立,不但便于区内地层划分与对比的需要,而且对盆内层序地层、构造演化、作用相分析都具重要作用。     

Cyclic sedimentation of the Barren Measures Formation (Damuda Group), Talchir Gondwana basin: Statistical appraisal from borehole logs

The succession of lithofacies of a part of the Barren Measures Formation of the Talchir Gondwana basin has been studied by statistical techniques. The lithologies have been grouped under five facies states viz coarse-, medium-, and fine-grained sandstones, shale and coal for statistical analyses. Markov chain analysis indicates the arrangement of Barren Measures lithofacies in the form of fining upward cycles. A complete cycle consists of conglomerate or coarse-grained sandstone at the base sequentially succeeded by medium-and fine-grained sandstones, shales and coal at the top. The entropy analysis puts the Barren Measures cycles into A-4 type cyclicity, which consists of different proportions of lower, upper and side truncated cycles of lithologic states. Regression analysis indicates a sympathetic relationship between total thickness of strata (net subsidence) and number of cycles and an antipathic relationship between average thickness and number of sedimentary cycles. The cyclic sedimentation of the Barren Measures Formation was controlled by autocyclic process which occurred due to the lateral migration of streams triggered by intrabasinal differential subsidence. In many instances, the clastic sediments from the laterally migrating rivers interrupted the cyclic sedimentation resulting in thinner cycles in areas where the number of cycles are more. Principal component and multivariate regression analyses suggest that the net subsidence of the basin is mostly controlled by the thickness of sandstones, shale beds and coal stringers.     

Palaeoenvironmental reconstruction of a middle Miocene alluvial fan to cyclic shallow lacustrine depositional system in the Calatayud Basin (NE Spain)

ABSTRACT The middle Miocene sedimentary fill of the Calatayud Basin in north‐eastern Spain consists of proximal to distal alluvial fan‐floodplain and shallow lacustrine deposits. Four main facies groups characteristic of different sedimentary environments are recognized: (1) proximal and medial alluvial fan facies that comprise clast‐supported gravel and subordinate sandstone and mudstone, the latter exhibiting incipient pedogenic features; (2) distal alluvial fan facies, formed mainly of massive mudstone, carbonate‐rich palaeosols and local carbonate pond deposits; (3) lake margin facies, which show two distinct lithofacies associations depending on their distribution relative to the alluvial fan system, i.e. front (lithofacies A), comprising massive siliciclastic mudstone and tabular carbonates, or lateral (lithofacies B) showing laminated and/or massive siliciclastic mudstone alternating with tabular and/or laminated carbonate beds; and (4) mudflat–shallow lake facies showing a remarkable cyclical alternation of green‐grey and/or red siliciclastic mudstone units and white dolomitic carbonate beds. The cyclic mudflat–shallow lake succession, as exposed in the Orera composite section (OCS), is dominantly composed of small‐scale mudstone–carbonate/dolomite cycles. The mudstone intervals of the sedimentary cycles are interpreted as a result of sedimentation from suspension by distal sheet floods, the deposits evolving either under subaerial exposure or water‐saturated conditions, depending on their location on the lacustrine mudflat and on climate. The dolomite intervals accumulated during lake‐level highstands with Mg‐rich waters becoming increasingly concentrated. Lowstand to highstand lake‐level changes indicated by the mudstone/dolomite units of the small‐scale cycles reflect a climate control (from dry to wet conditions) on the sedimentation in the area. The spatial distribution of the different lithofacies implies that deposition of the small‐scale cycles took place in a low‐gradient, shallow lake basin located in an interfan zone. The development of the basin was constrained by gradual alluvial fan aggradation. Additional support for the palaeoenvironmental interpretation is derived from the isotopic compositions of carbonates from the various lithofacies that show a wide range of δ¹⁸O and δ¹³C values varying from ?7·9 to 3·0‰ PDB and from ?9·2 to ?1·7‰ PDB respectively. More negative δ¹⁸O and δ¹³C values are from carbonate‐rich palaeosols and lake‐margin carbonates, which extended in front of the alluvial fan systems, whereas more positive values correspond to dolomite beds deposited in the shallow lacustrine environment. The results show a clear trend of δ¹⁸O enrichment in the carbonates from lake margin to the centre of the shallow lake basin, thereby also demonstrating that the lake evolved under hydrologically closed conditions.     

Cyclic sedimentation of the Karharbari Formation (Damuda Group), Talchir Gondwana basin, Orissa

The cyclic arrangement of lithofacies of the Karharbari Formation of the Damuda Group from a part of the Talchir Gondwana basin has been examined by statistical techniques. The lithologies have been condensed into five facies states viz. coarse-, medium-, fine-grained sandstones, shale and coal for the convenience of statistical analyses. Markov chain analysis indicates the arrangement of Karharbari lithofacies in form of fining upward cycles. A complete cycle consists of conglomerate or coarse-grained sandstone at the base sequentially succeeded by medium-and fine-grained sandstones, shale and coal at the top. The entropy analysis categorizes the Karharbari cycles into the C-type cyclicity, which is essentially a random sequence of lithologic states. Regression analysis undertaken in the present study indicates the existence of sympathetic relationship between total thickness of strata (net subsidence) and number and average thickness of sedimentary cycle and antipathic relationship between number and average thickness of sedimentary cycle. These observations suggest that cyclic sedimentation of the Karharbari Formation was controlled by autocyclic process by means of lateral migration of streams activated by intrabasinal differential subsidence, which operated within the depositional basin and the channels carrying coarse grade clastic sediments, which make the cycles thicker, tend to be more common in the areas of maximum subsidence. Clastic sediments issued from the laterally migrating rivers interrupted the cyclic sedimentation of the Karharbari Formation in many instances.     

Sheet-flow deposits of graded beds and mudstones on an alluvial sandflat-playa system: Upper Triassic Blomidon redbeds, St Mary's Bay, Nova Scotia

The 400 m of Blomidon redbeds accumulated in a semi-arid rift valley in the subtropics. At St Mary's Bay, these redbeds are 64% sandy mudstone (playa mudflats), 25% graded beds (sandflats at the toes of alluvial fans), 10% fissile claystone (playa lakes), and 1% channel sandstone (stream channels). Flash floods in mountains south of the valley flowed down alluvial fans to spread out to the north-east as sheet flows on sandflats and playa mudflats. Deceleration of the sheet flows deposited graded beds 2–83 cm in thickness on the sandflats and thin layers of mud on the playas. Nine sequences, consisting of arrangements of six lithologies, compose 90% of the graded beds. In order of decreasing abundance, these are: ripple cross-laminated siltstone → horizontally laminated mudstone; fining-upward, ripple cross-laminated siltstone; ripple cross-laminated sandstone → horizontally laminated mudstone; cross-bedded sandstone horizontally laminated mudstone; ripple cross-laminated sandstone → ripple cross-laminated siltstone; rippledrift cross-laminated siltstone horizontally laminated mudstone; fining-upward, ripple-drift cross-laminated siltstone; cross-bedded sandstone → ripple cross-laminated siltstone; and cross-bedded sandstone → ripple cross-laminated siltstone → horizontally laminated mudstone. The sheet flows, perhaps up to 1 m in depth, had a high concentration of suspended load. Deposition was dominantly during lower flow regime conditions and moderate to rapid flow deceleration. There are 32 thinning and fining-up cycles where a sandflat package of graded beds is transitionally followed by a playa package of sandy mudstone. The cycles range in thickness from 1·3 to 13·3 m, averaging 4·6 m. Each cycle is initiated by avulsion to a new active channel network on a fan. Gradual abandonment of the channel network produces the thinning and fining-up cycle. The cycles are grouped in three 60–70 m fining-up megacycles. Upwards within each megacycle, the packages of sandy mudstone compose a progressively larger proportion of the cycles. Each megacycle evidently was initiated by a brief period of tectonic movement on the border faults that produced greater relief of the highlands relative to the valley floor. Subsequent erosion gradually lowered the relief to yield a fining-up megacycle.     

Anatomy of an Upper Triassic continental to marginal‐marine system: the mixed siliciclastic–carbonate Travenanzes Formation (Dolomites,Northern Italy)

The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply.     

Depositional features of a late Weichselian outwash fan; central East Jylland,Denmark

Four major sedimentary facies are present in coarse-grained, ice-marginal deposits from central East Jylland, Denmark. Facies A and B are matrix-supported gravels deposited by subaerial sediment gravity flows as mudflows (facies A) and debris flows (facies B). Facies C consists of clast-supported, water-laid gravels and facies D are cross-bedded sand and granules. The facies can be grouped into three facies associations related to the supraglacial and proglacial environments: (1) the flow-till association is made up of alternating beds of remobilized glacial mixton (facies A) and well-sorted cross-bedded sand (facies D); (2) the outwash apron association resembles the sediments of alluvial fans in containing coarse-grained debris-flow deposits (facies B), water-laid gravel deposited by sheet floods (facies C) and cross-bedded sand and granules (facies D) from braided distributaries; (3) the valley sandur association comprises water-laid gravel (facies C) interpreted as sheet bars and longitudinal bars interbedded with cross-bedded sand and granules (facies D) deposited in channels between bars in a braided environment.The general coarsening-upward trend of the sedimentary sequences caused by the transition of bars and channel-dominated facies to debris-flow-dominated facies indicate an increasing proximality of the outwash deposits, picturing the advance and still stand of a large continental lowland ice-sheet. The depositional properties suggest that sedimentation was caused by melting along a relatively steep, active glacier margin as a first step towards the final vanishing of the Late Weichselian icesheet (the East Jylland ice) covering eastern Denmark.     

Glacier outburst floods and outwash plain development: Skeiäarársandur, Iceland

Outwash plains, such as Skeiäarársandur, serve as prototypes for braided river facies and analogs for the Mars Pathfinder and Viking 1 landing sites on the margins of the Chryse Basin. Glacier outburst floods (jökulhlaups) have generated some of the largest known terrestrial freshwater flows and recent studies suggest that the stratigraphy of outwash plains (sandur) is dominated by sedimentary sequences laid down during jökulhlaups, rather than by braided river facies produced by an ablation-related flow regime. The modern point-source drainage configuration on Skeiäarársandur evolved from a diffuse, multipoint distributary system during glacier retreat, when meltwater began to be routed parallel to the ice front. The contemporary pattern of water and sediment dispersal across Skeiäarársandur differs from the conditions that prevailed when the ice front was coupled to the sandur, and the November 5–6 1996 outburst flood from Skeiäarárjökull had little impact on the proximal surface of Skeiäarársandur beyond the confines of the entrenched channels that traverse it. Thus, the point-source dispersal system on Skeiäarársandur may not provide an exact analogue for the pattern of meltwater dispersal responsible for the sediment assemblage laid down during past jökulhlaups, and caution may be required when comparing conditions on Skeiäarársandur to those presumed to have been experienced during massive outburst floods elsewhere.     

Magnitude and frequency in proglacial rivers: a geomorphological and sedimentological perspective

Proglacial fluvial sedimentary systems receive water from a variety of sources and have variable discharges with a range of magnitudes and frequencies. Little attention has been paid to how these various magnitude and frequency regimes interact to produce a distinctive sedimentary record in modern and ancient proglacial environments. This paper reviews the concept of magnitude and frequency in relation to proglacial fluvial systems from a geomorphic and sedimentary perspective rather than a hydrological or statistical perspective. The nature of the meltwater inputs can be characterised as low-magnitude–high-frequency, primarily controlled by ablation inputs from the source glacier, or high-magnitude–low-frequency, primarily controlled by ‘exceptional’ inputs. The most important high-magnitude–low-frequency inputs are catastrophic outburst floods, often referred to by the term jökulhlaup (Icelandic for glacier-burst). Glacier surges are an additional form of cyclical variation impacting the proglacial environment, which briefly alter the volumes and patterns of meltwater input. The sedimentary consequences of low-magnitude–high-frequency discharges are related to frequent variations in stage, the greater directional variability that sediment will record, and the increased significance of channel confluence sedimentation. In contrast, the most significant characteristics of high-magnitude–low-frequency flooding include the presence of large flood bars and mid-channel ‘jökulhlaup’ bars, hyperconcentrated flows, large gravel dunes, and the formation of ice-block kettle hole structures and rip-up clasts. Glacier surges result in a redistribution of low-magnitude–high-frequency processes and products across the glacier margin, and small floods may occur at the surge termination. Criteria for distinguishing magnitude and frequency regimes in the proglacial environment are identified based on these major characteristics. Studies of Quaternary proglacial fluvial sediments are used to determine how the interaction of the various magnitude and frequency regimes might produce a distinctive sedimentary record. Consideration of sandur architecture and stratigraphy shows that the main controls on the sedimentary record of proglacial regions are the discharge magnitude and frequency regime, sediment supply, the pattern of glacier advance or retreat, and proglacial topography. A model of sandur development is suggested, which shows how discharge magnitude and frequency, in combination with sandur incision and aggradation (controlled by glacier advance and retreat) can control sandur stratigraphy.     

High-Frequency Sequence Stratigraphy Using Syntactic Methods and Clustering Applied to the Upper Limestone Coal Group (Pendleian, E1) of the Kincardine Basin, United Kingdom

We define a distance between sedimentary successions to compare their dissimilarity formally. Distance definition is based on attributed syntactic representation. One-dimensional successions can be represented by a string of lithofacies symbols sequentially or vertically. Each symbol can also have a vector of attributes that can provide other information on lithofacies such as thickness. The distance of any two successions is then defined consisting of its syntactic and attribute subdistances. Syntactic distance measures difference of vertical lithofacies change between two successions and attribute distance measures difference of thickness of corresponding lithofacies. Clustering is used to test validity of distance definition and its potential application to analysis of cycle-dominated sedimentary successions. Example is from the Namurian-A succession in Kincardine basin, central Scotland. There are 56 cycles in intervals of about 300 m each in two boreholes. Recognition of intermediate cycles depends on correctly determining of types of these short cycles and their vertical stacking pattern. Intermediate cycles have better potential in high-resolution stratal correlation regionally. Syntactic clustering results show that 56 short cycles can be classified into four groups with distinctive geological interpretation, which further helps reveal hierarchical cyclic architecture of the whole succession.     

A pre‐LGM sandur at Fiskarheden in NW Dalarna,central Sweden – sedimentology and glaciotectonic deformation

The Fiskarheden quarry, situated in NW Dalarna, central Sweden, reveals thick coarse‐grained sediments of Scott type facies association representing a sandur deposited in an ice‐proximal proglacial environment. Optically Stimulated Luminescence (OSL) dating of the sandur sediments suggests a pre‐Last Glacial Maximum (LGM) age. Most acquired ages are pre‐Saalian (>200 ka) and we regard each of these ages to represent non/poorly bleached sediment except for one small‐aliquot OSL age of 98±6 ka. This age comes from the top surface of an arguably well‐bleached sand bed deposited on the lee‐side of a braid‐bar, putting the sandur build‐up into the Early Weichselian. Large‐scale glaciotectonic structures show an imbricate thrust fan involving both ductile and brittle deformation. The deformation was from the WNW, which largely coincides with the formative trend of the predominating streamlined terrain and Rogen moraine tracts surrounding Fiskarheden. It is suggested that the deformation of the sandur sediments took place when the advancing glacier approached and pushed its own proglacial outwash sediment, during an ice‐marginal oscillation either at the inception of one of the Early Weichselian glaciations in the area, or during a general ice retreat amid a deglacial phase. The Fiskarheden sandur deposits are covered by a subglacial traction till deposited from the NE/NNE. This direction corresponds with younger streamlined terrain flowsets cross‐cutting the older NNW–SSE system and probably represents deglaciation in the area following the LGM. This study will add to the understanding of the formation and deformation of Pleistocene sandur successions and their relationship to past ice‐sheet behaviour.     

Markov chain analysis applied to an ancient alluvial plain succession

Markov chain analysis is a comparatively simple statistical technique for the detection of repetitive processes in space or time. Coal measure cyclothems or fluvial fining-upward cycles are good examples of sedimentary successions laid down under the control of Markovian processes. Analyses of stratigraphic sections commence with a transition count matrix, a two-dimensional array in which all possible vertical lithologic transitions are tabulated. Various probability matrices may be derived from this raw data, and these are then subjected to chi-square tests to determine the presence or absence of the Markov property. This technique is applied to four types of stratigraphic succession which occur in the Devonian rocks of Prince of Wales Island, Arctic Canada. (1) A conglomerate succession of alluvial fan origin. Markov analysis is of little or no assistance in the interpretation of these rocks, in which only two principal lithologies are present. (2) A conglomerate-sandstone succession. Fluvial fining-upward cycles are detectable by visual examination of the sections and are strongly indicated by Markov analysis. (3) A sandstone-carbonate succession, of marginal marine origin, and including both marine and non-marine strata. Cyclicity is weak in these rocks, but analysis suggests that regressions took place much more rapidly than transgressions during their period of deposition. (4) A succession in which the relative proportions of the various lithologies vary markedly with age. The varying nature of the cyclic tendencies is emphasized in this case by dividing the succession into two subintervals, for the purpose of analysis.     

Depositional facies of the subsurface Neogene Surma Group in the Sylhet Trough of the Bengal Basin,Bangladesh: record of tidal sedimentation

The Bengal Basin, in the north-eastern part of the Indian subcontinent, contains a thick (± 22 km) early Cretaceous-Holocene sedimentary succession. The Neogene succession in the Sylhet Trough of the basin reaches a thickness of more than 6 km of which the Surma Group contains important sandstone reservoirs. Lithologically, the group consists of a succession of alternating shales, siltstones, sandy shales and sandstones, with minor conglomerates. This research work is a sedimentological analysis of the subsurface Neogene succession encountered in the petroleum exploration wells in the Sylhet Trough of the Bengal Basin. Detailed lithologic logs of the cores, based on considering texture and sedimentary structure, permit a subdivision into eight lithofacies, e.g., a shale-dominated facies, interbedded fine sandstones and mudstones, ripple-laminated sandstones, parallel-laminated sandstones, massive sandstones, cross-bedded sandstones, cross-bedded sandstones with pebble/granule lag and conglomerates. Characteristic sedimentary structures of the Surma Group, such as flaser-, wavy- and lenticular-bedding, bipolarity of ripple cross-stratification, evenly laminated sand/silt-streaked shales, reactivation surfaces within cross-bedded sandstone sets, mud-drapes on foreset laminae and herringbone cross-stratification as well as small-scale vertical sequences (several fining-upward cycles) are diagnostic for tidal influence. On the basis of the lithofacies associations and prograding character of the deposits revealed from the electrofacies associations, the Surma Group sediments have been interpreted as representing deposits of tide-dominated deltaic depositional setting.     

Stratigraphy and Sedimentology of Middle Jurassic Sequence of Chorar Island,Patan District,Kachchh Basin,Gujarat

Chorar Island exposes ～109 m thick middle Jurassic (Bathonian-Callovian) succession in the eastern most part of the Kachchh Basin, Patan District, Gujarat and is divided into two, Khadir and Gadhada formations. It mainly comprises of mixed siliciclastic-carbonate sediments and limestones; the shales dominate the lower part of the succession while the top of the succession is marked by ferruginous sandstone which also forms the vast, prominent peripheral zone of the Chorar dome. The field and laboratory analysis of the succession reveals nine lithofacies which includes ferruginous sandstone, cross bedded white sandstone, micritic sandstone, allochemic sandstone, sandy micrite, mudstone, sandy allochemic limestone, coralline limestone and shale. The mix siliciclastic-carbonate sediments and ferruginous facies are fossiliferous in nature and display sedimentary structures, like ripple marks, cross- and planar- lamination with biogenic sedimentary structures. Coralline limestone facies comprise of large size (>1m diameter) corals, which are diagenetically modified severely and have lost its original internal structures. The sediment characteristics and associated bioclasts indicates low to moderate wave and current energy in shoreface-offshore subsequently changing to wave dominated shoreface during the deposition of the middle Jurassic sediments of the Chorar Island.     

Sedimentary facies analysis and depositional model of gravity-flow deposits of the Yanchang Formation,southwestern Ordos Basin,NW China

During the deposition of the Chang-7 (Ch-7) and Chang-6 (Ch-6) units in the Upper Triassic, gravity flows were developed widely in a deep lake in the southwestern Ordos Basin, China. Based on cores, outcrops, well-logs and well-testing data, this paper documents the sedimentary characteristics of the gravity-flow deposits and constructs a depositional model. Gravity-flow deposits in the study area comprise seven lithofacies types, which are categorised into four groups: slides and slumps, debris-flow-dominated lithofacies, turbidity-current-dominated lithofacies, and deep-water mudstone-dominated lithofacies. The seven lithofacies form two sedimentary entities: sub-lacustrine fan and the slump olistolith, made up of three and two lithofacies associations, respectively. Lithofacies association 1 is a channel–levee complex with fining-/thinning-upward sequences whose main part is characterised by sandy debris flow-dominated, thick-bedded massive sandstones. Lithofacies association 2 represents distributary channelised lobes of sub-lacustrine fans, which can be further subdivided into distributary channel, channel lateral margin and inter-channel. Lithofacies association 3 is marked by non-channelised lobes of sub-lacustrine fans, including sheet-like turbidites and deep-lake mudstones. Lithofacies association 4 is represented by proximal lobes of slump olistolith, consisting of slides and slumps. Lithofacies association 5 is marked by distal lobes of slump olistolith, comprising tongue-shaped debris flow lobes and turbidite lobes. It is characterised by sandy debris flow, muddy debris flow-dominated sandstone and sandstone with classic Bouma sequences. Several factors caused the generation of gravity flows in the Ordos Basin, including sediment supply, terrain slope and external triggers, such as volcanisms, earthquakes and seasonal floods. The sediment supply of sub-lacustrine fan was most likely from seasonal floods with a high net-to-gross and incised channels. Triggered by volcanisms and earthquakes, the slump olistolith is deposited by the slumping and secondary transport of unconsolidated sediments in the delta front or prodelta with a low net-to-gross and no incised channels.     

Cyclostratigraphy and high-frequency carbon isotope fluctuations in Upper Cretaceous shallow-water carbonates, southern Italy

Abstract A detailed carbon isotope study has been carried out on a Santonian (Upper Cretaceous) carbonate platform succession that crops out at Monte Sant'Erasmo (southern Italy). Previous centimetre‐scale studies on this succession have shown that high‐frequency eustatic changes, resulting from the Earth's orbital fluctuations, controlled the hierarchical organization of the depositional and early diagenetic features in elementary cycles, bundles (groups of three to five elementary cycles) and superbundles (groups of three or four bundles). The elementary cycles, which correspond to single beds, suggest a control caused by Earth's precession; the bundles and superbundles record the short (≈ 100 kyr) and long (≈ 400 kyr) eccentricity periodicity respectively. The δ¹³C signal of the Monte Sant'Erasmo succession is cyclic in nature and may be considered to be a reliable proxy for the sedimentary evolution (and related sea‐level history) of the analysed sequence. The carbon isotope cyclicity is recorded at bundle and superbundle level, but it is not evident at the scale of the elementary cycles, at least with the sampling interval used in this study. Spectral analysis of the δ¹³C record shows two main peaks corresponding to the short‐ and long‐eccentricity periodicity, whereas the precession signal is not evident in the power spectrum. In addition, lithofacies analysis shows that, in each bundle (and superbundle), higher C isotope values occur in sediments characterized by marine cements, whereas lower values are normally found in more restricted deposits overprinted by early meteoric diagenesis. Early diagenesis, driven by periodic sea‐level fluctuations, developed in either shallow‐subtidal (marine diagenesis) or subaerial‐exposed (meteoric overprint) sedimentary environments and directly influenced the carbon isotope signature. As a consequence, the δ¹³C record at Monte Sant'Erasmo reflects high‐frequency climatic oscillations controlling both environmental and early diagenetic changes. The long‐term isotopic record is similar to that of contemporaneous pelagic sections in England and elsewhere in Italy. It is concluded that the δ¹³C signature of shallow‐water carbonates, such as those of Monte Sant'Erasmo, offers great potential for correlation with coeval sections, including those of the pelagic realm.     

Sheetflow fluvial processes in a rapidly subsiding basin, Altiplano plateau, Bolivia

Although facies models of braided, meandering and anastomosing rivers have provided the cornerstones of fluvial sedimentology for several decades, the depositional processes and external controls on sheetflow fluvial systems remain poorly understood. Sheetflow fluvial systems represent a volumetrically significant part of the non‐marine sedimentary record and documented here are the lithofacies, depositional processes and possible roles of rapid subsidence and arid climate in generating a sheetflow‐dominated fluvial system in the Cenozoic hinterland of the central Andes. A 6500 m thick succession comprising the Late Eocene–Oligocene Potoco Formation is exposed continuously for >100 km along the eastern limb of the Corque syncline in the high Altiplano plateau of Bolivia. Fluvial sandstone and mudstone units were deposited over an extensive region (>10 000 km²) with remarkably few incised channels or stacked‐channel complexes. The Potoco succession provides an exceptional example of rapid production of accommodation sustained over a prolonged period of time in a non‐marine setting (>0·45 mm year⁻¹ for 14 Myr). The lower ≈4000 m of the succession coarsens upward and consists of fine‐grained to medium‐grained sandstone, mudstone and gypsum deposits with palaeocurrent indicators demonstrating eastward transport. The upper 2500 m also coarsens upward, but contains mostly fine‐grained to medium‐grained sandstone that exhibits westward palaeoflow. Three facies associations were identified from the Potoco Formation and are interpreted to represent different depositional environments in a sheetflow‐dominated system. (i) Playa lake deposits confined to the lower 750 m are composed of interbedded gypsum, gypsiferous mudstone and sandstone. (ii) Floodplain deposits occur throughout the succession and include laterally extensive (>200 m) laminated to massive mudstone and horizontally stratified and ripple cross‐stratified sandstone. Pedogenic alteration and root casts are common. (iii) Poorly confined channel and unconfined sheet sandstone deposits include laterally continuous beds (50 to >200 m) that are defined primarily by horizontally stratified and ripple cross‐stratified sandstone encased in mudstone‐rich floodplain deposits. The ubiquitous thin‐sheet geometry and spatial distribution of individual facies within channel sandstone and floodplain deposits suggest that confined to unconfined, episodic (flash) flood events were the primary mode of deposition. The laterally extensive deposition and possible distributary nature of this sheetflow‐dominated system are attributed to fluvial fan conditions in an arid to semi‐arid, possibly seasonal, environment. High rates of sediment accumulation and tectonic subsidence during early Andean orogenesis may have favoured the development and long‐term maintenance of a sheetflow system rather than a braided, meandering or anastomosing fluvial style. It is suggested here that rapidly produced accommodation space and a relatively arid, seasonal climate are critical conditions promoting the generation of sheetflow‐dominated fluvial systems.