Geology and Re-Os Geochronology of Mineralization of the Miduk Porphyry Copper Deposit, Iran

The Miduk porphyry copper deposit is located in Kerman province, 85 km northwest of the Sar Cheshmeh porphyry copper deposit, Iran. The deposit is hosted by Eocene volcanic rocks of andesitic–basaltic composition. The porphyry‐type mineralization is associated with two Miocene calc‐alkaline intrusive phases (P1 and P2, respectively). Five hypogene alteration zones are distinguished at the Miduk deposit, including magnetite‐rich potassic, potassic, potassic–phyllic, phyllic and propylitic. Mineralization occurs as stockwork, dissemination and nine generations (magnetite, quartz–magnetite, barren quartz, quartz‐magnetite‐chalcopyrite‐anhydrite, chalcopyrite–anhydrite, quartz‐chalcopyrite‐anhydrite‐pyrite, quartz‐molybdenite‐anhydrite ± chalcopyrite ± magnetite, pyrite, and quartz‐pyrite‐anhydrite ± sericite) of veinlets and veins. Early stages of mineralization consist of magnetite rich veins in the deepest part of the deposit and the main stage of mineralization contains chalcopyrite, magnetite and anhydrite in the potassic zone. The high intensity of mineralization is associated with P2 porphyry (Miduk porphyry). Based on petrography, mineralogy, alteration halos and geochemistry, the Miduk porphyry copper deposit is similar to those of continental arc setting porphyry copper deposits. The Re‐Os molybdenite dates provide the timing of sulfide mineralization at 12.23 ± 0.07 Ma, coincident with U/Pb zircon ages of the P2 porphyry. This evidence indicates a direct genetic relationship between the Miduk porphyry stock and molybdenite mineralization. The Re‐Os age of the Miduk deposit marks the main stage of magmatism and porphyry copper formation in the Central Iranian volcano‐plutonic belt.     

Geology and Hydrothermal Alteration of the Duobuza Gold‐Rich Porphyry Copper District in the Bangongco Metallogenetic Belt,Northwestern Tibet

The Duobuza gold‐rich porphyry copper district is located in the Bangongco metallogenetic belt in the Bangongco‐Nujiang suture zone south of the Qiangtang terrane. Two main gold‐rich porphyry copper deposits (Duobuza and Bolong) and an occurrence (135 Line) were discovered in the district. The porphyry‐type mineralization is associated with three Early Cretaceous ore‐bearing granodiorite porphyries at Duobuza, 135 Line and Bolong, and is hosted by volcanic and sedimentary rocks of the Middle Jurassic Yanshiping Formation and intermediate‐acidic volcanic rocks of the Early Cretaceous Meiriqie Group. Simultaneous emplacement and isometric distribution of three ore‐forming porphyries is explained as multi‐centered mineralization generated from the same magma chamber. Intense hydrothermal alteration occurs in the porphyries and at the contact zone with wall rocks. Four main hypogene alteration zones are distinguished at Duobuza. Early‐stage alteration is dominated by potassic alteration with extensive secondary biotite, K‐feldspar and magnetite. The alteration zone includes dense magnetite and quartz‐magnetite veinlets, in which Cu‐Fe‐bearing sulfides are present. Propylitic alteration occurs in the host basic volcanic rocks. Extensive chloritization‐silicification with quartz‐chalcopyrite or quartz‐molybdenite veinlets superimposes on the potassic alteration. Final‐stage argillic alteration overlaps on all the earlier alteration. This alteration stage is characterized by destruction of feldspar to form illite, dickite and kaolinite, with accompanying veinlets of quartz + chalcopyrite + pyrite and quartz + pyrite assemblages. Cu coexists with Au, which indicates their simultaneous precipitation. Mass balance calculations show that ore‐forming elements are strongly enriched during the above‐mentioned three alteration stages.     

The San Jorge porphyry copper deposit, Mendoza, Argentina: a combination of orthomagmatic and hydrothermal mineralization

The San Jorge porphyry copper deposit (SJPCD) is hosted by Carboniferous clastic sedimentary rocks and Permian intrusions located within the Permo-Triassic belt of Chile and Argentina. Its hypogene mineralization and alteration are products of superposed orthomagmatic and hydrothermal events that were strongly fault controlled. Copper related to orthomagmatic processes includes disseminated chalcopyrite in the matrix of porphyritic granodiorite and andesite, and chalcopyrite with tourmaline and quartz in breccias, both of which have accompanying potassic alteration. Soon thereafter, disseminated chalcopyrite is associated with a structurally controlled silicification of the sedimentary sequence. Finally, multiple episodes of hydrofracturing, probably driven by a deep-seated intrusion, deposited sulfide minerals in veinlets throughout the sedimentary sequence; the centers of these systems are characterized by potassic alteration. Total sulfides, which include chalcopyrite, pyrite, arsenopyrite, and pyrrhotite, and pyrite:chalcopyrite form a linear NNE trend, parallel to the main faults. Quartz–sericite is the dominant alteration and is ubiquitous. Zones of potassic alteration can be delineated even though phyllic alteration can be superposed. Much of the system evolved under reducing conditions. Despite uplift along a reverse fault during the Tertiary, and subsequent erosion, the system is preserved at high levels. Supergene processes redistributed copper in secondary oxides and sulfides. These processes were more effective where the deposit is covered by unconsolidated alluvial sediments. The unique history of the San Jorge deposit renders it an important variation of porphyry copper-style mineralization.     

Metallogeny of the Mont-de-l’Aigle IOCG deposit, Gaspé Peninsula, Québec, Canada

The Mont-de-l’Aigle deposit is located in the northern part of Dome Lemieux, in the Connecticut Valley-Gaspé Synclinorium, Gaspé Peninsula, Québec. The Dome Lemieux is a subcircular antiform of Siluro–Devonian sedimentary rocks that is cut by numerous mafic and felsic sills and dikes of Silurian to Late Devonian age. Plutonism occurred in a continental within-plate extensional setting typical of orogenic collapse. The Cu−Fe (± Au) mineralization of Mont-de-l’Aigle occurs in veins, stockworks, and breccias. Mineralization is located near or within N−S and NW−SE faults cutting sedimentary rocks. IOCG mineralization postdates intrusions, skarns, hornfels, and epithermal mineralization typical of the southern part of the Dome Lemieux. The paragenetic sequence comprises: (1) pervasive sodic, potassic, chlorite, and silica alteration, (2) hematite, quartz, pyrite, magnetite, and chalcopyrite veins, stockworks and breccias and, (3) dolomite ± hematite veins and veinlets cutting the earlier mineralization. Intrusions display proximal sodic and potassic alteration, whereas sedimentary rocks have proximal decalcification, silicification, and potassic alteration. Both intrusive and sedimentary rocks are affected by a pervasive distal chlorite (± silica) alteration. The sulfur isotope composition of pyrite and chalcopyrite (δ³⁴S=−1.5 to 4.8‰) suggests that sulfur was derived mainly from igneous rocks. Fluid δ¹⁸O (−0.4 to 2.65‰) indicates meteoric or seawater that reacted with the country rocks. Mixing of hot magmatic fluids with a cooler fluid, perhaps meteoric or seawater is suggested for mineral deposition and alteration of the Mont-de-l’Aigle deposit. The mineralogy, alteration, and sulfur isotope composition of the Mont-de-l’Aigle deposit compare well with IOCG deposits worldwide, making the Mont-de-l’Aigle deposit a rare example of Paleozoic IOCG mineralization, formed at shallow depth, within a low metamorphic grade sedimentary rock sequence.     

Palladium, Platinum and Gold Concentrations in Fengshan Porphyry Cu–Mo Deposit, Hubei Province, China

Abstract: The Fengshan porphyry-skarn copper–molybdenum (Cu–Mo) deposit is located in the south-eastern Hubei Province in east China. Cu–Mo mineralization is hosted in the Fengshan granodiorite porphyry stock that intruded the Triassic Daye Formation carbonate rocks in the early Cretaceous (~140 Ma), as well as the contact zone between granodiorite porphyry stock and carbonate rocks, forming the porphyry-type and skarn-type association. The Fengshan granodiorite stock and the immediate country rocks are strongly fractured and intensely altered by hydrothermal fluids. In addition to intense skarn alteration, the prominent alteration types are potassic, phyllic, and propylitic, whereas argillation is less common. Mineralization occurs as veins, stock works, and disseminations, and the main ore minerals are chalcopyrite, pyrite, molybdenite, bornite, and magnetite. The contents of palladium, platinum and gold (Pd, Pt and Au) are determined in nine samples from fresh and mineralized granodiorite and different types of altered rocks. The results show that the Pd content is systematically higher than Pt, which is typical for porphyry ore deposits worldwide. The Pt content ranges from 0.037 to1.765 ppb, and the Pd content ranges between 0.165 and 17.979 ppb. Pd and Pt are more concentrated in porphyry mineralization than skarn mineralization, and have negative correlations with Au. The reconnaissance study presented here confirms the existence of Pd and Pt in the Fengshan porphyry-skarn Cu–Mo deposit. When compared with intracontinent and island arc geotectonic settings, the Pd, Pt, and Au contents in the Fengshan porphyry Cu–Mo deposit in the intracontinent is lower than the continental margin types and island are types. A combination of available data indicates that Pd and Pt were derived from oxidized alkaline magmas generated by the partial melting of an enriched mantle source.     

希腊斯克瑞斯斑岩型铜-金-铂族元素矿床地质特征和成矿模型

斯克瑞斯斑岩型铜矿位于希腊北部哈尔基迪基半岛,塞尔维亚马其顿成矿带。矿体赋存于侵入到韦尔蒂斯科斯组的古近纪—新近纪碱性岩体中,岩体的分布受深部断裂影响。截至2011年,斯克瑞斯矿床已开采5.2×108t铜,Cu平均品位为0.5%,Au平均品位为0.8×10-6,Pd平均品位为110×10-9,Pt平均品位为17×10-9。铜-金矿化呈脉状、网脉状及浸染状分布于岩体及围岩中。矿石矿物主要为黄铜矿、斑铜矿、黄铁矿等,与矿化有关的围岩蚀变主要有钾长石化、硅化、青磐岩化、绢云母化等。锆石U-Pb年龄、全岩Ar-Ar年龄和矿床地球化学特征均显示,岩浆侵位与成矿作用之间关系密切,其形成时代约为19Ma。该矿床以Pd-Pt含量较高为特征。对斯克瑞斯斑岩型富铂族元素斑岩铜矿特点及成矿规律的系统总结,可以为在中国境内寻找同类矿床提供参考。     

安徽庐枞沙溪斑岩铜矿蚀变及矿化特征研究

沙溪斑岩铜矿是长江中下游成矿带中部庐枞火山岩盆地外围的一个大型铜矿床.本文在前人工作基础上,基于详细的野外观察和系统的岩相学、矿相学工作,详细研究了矿床的蚀变特征及分带.结果表明,矿床的蚀变类型有钾硅酸盐化、青磐岩化、长石分解蚀变和高岭土化,从深到浅依次发育有钾硅酸盐化、长石分解蚀变叠加钾硅酸盐化、长石分解蚀变和高岭土化等蚀变.确定了矿化特征、矿物生成顺序并划分了成矿阶段,即:钾硅酸盐阶段、石英硫化物阶段和石英碳酸盐阶段,其中,石英硫化物阶段又可进一步分为石英硫化物亚阶段和绿帘石-绿泥石亚阶段.基于蚀变及矿化特征认为,沙溪铜矿床的矿化始于钾硅酸盐阶段的晚期,石英硫化物亚阶段是黄铜矿主要的沉淀阶段,石英碳酸盐阶段也对成矿贡献了部分铜质.与世界上不同构造环境的典型斑岩铜矿床对比认为,沙溪矿床总体上与这些矿床的蚀变、矿化特征类似;与陆缘弧、岛弧、陆内碰撞造山后伸展环境矿床在矿体产出位置、蚀变分带方面相似;而由于围岩性质的差异,与板内环境的德兴矿床在矿体位置、蚀变分带方面存在差异,但是二者在脉体类型特别是与矿化关系密切的脉体特征上较为一致.因此,对于斑岩型矿床而言,构造背景可能控制了其岩浆的形成、演化以及含矿性,而岩浆岩最终定位的深度、围岩等条件则控制了其蚀变、矿化特征.     

Alteration, zoning model, and mineralogical structure considering lithogeochemical investigation in Northern Dalli Cu–Au porphyry

Dalli Cu–Au porphyry deposit was occurred in the igneous diorite, quartz diorite porphyry (QDP), and volcanic rocks such as porphyritic amphibole andesite, andesite (AND), dacite, and pyroclastics during the late Miocene to Pliocene. Regolith investigations and Advanced Spaceborne Thermal Emission and Reflection Radiometer images were used to identify the anomalous areas. According to lithogeochemical survey (from boreholes and trenches) in Northern Dalli Cu–Au porphyry, the potassic, chlorite, sericite, propylitic, and argillic alterations have been found and mineralization was basically associated with potassic and quartz–sericite alterations. The alteration is dominantly moderate quartz chlorite?±?sericite magnetite with 1–10 mm wide quartz?±?magnetite veinlets. The elevated copper–gold values are correlated with density of stockworking and mineralization. The intensity of the mineralization is high in the contact of QDP and AND with increases in pyrite and chalcopyrite values. Malachite, native Cu, and bornite were used to identify supergene, transition, and hypogene zone. In addition, molybdenum increased near to the center of granodiorite intrusion. And besides, from depth to surface in DDH03 and wall rock to mineralization zones, a sequence of Mo→Cu (Au)→Au (Cu) was recorded and the mineralization temperature cooled down (from high to low). The alteration is characterized by specific pattern and structure in Dalli Cu–Au porphyry deposit. The alteration model was followed from the modified Lowell and Gilbert model. The porphyry is stockworked by quartz veins and by quartz magnetite veins. Vein distribution and ore mineralogy vary between the different alteration zones. Due to the formation of an iron cap in the supergene, especially in the southern hills, supergene grade was higher than hypogene zone. Also, hematite, as a dominant Fe oxide in DDH03 borehole with minor limonite, jarosite, and goethite created thickness about 150–270 m in supergene zone; finally, this finding show a possibility of an extensive mineralization.     

Zircon U–Pb,Molybdenite Re–Os and K‐feldspar 40Ar/39Ar Dating of the Bolong Porphyry Cu–Au Deposit,Tibet, China

The Bolong porphyry Cu–Au deposit is a newly discovered deposit in the central Tibetan Plateau, and is ranked as the second largest copper deposit discovered to date in the Bangong‐Nujiang metallogenic belt in China. Three granodiorite porphyry phases occur within the Bolong porphyry Cu–Au deposit. Phyllic alteration is widespread on the surface of the deposit, and potassic alteration occurs at depth, associated with granodiorite porphyries. The copper and gold mineralization is clearly related to the potassic and phyllic alteration. Multiple chronometers were applied to constrain the timing of magmatic–hydrothermal activity at the Bolong deposit. Zircon U–Pb geochronology reveals that the granodiorite porphyry phases were emplaced at ca. 120 Ma. Re–Os data of four molybdenite samples from quartz–molybednite veinlets yielded an isochron age of 119.4 ± 1.3 Ma. The plateau age of hydrothermal K‐feldspar from the potassic alteration zone, analyzed by ⁴⁰Ar/³⁹Ar dating, is 118.3 ± 0.6 Ma, with a similar reverse isochron age of 118.5 ± 0.7 Ma. Therefore, the magmatic–hydrothermal activity occurred at ca. 120–118 Ma, which is similar in age to the neighboring Duobuza porphyry copper deposit. The period of 120–118 Ma is therefore important for the development of porphyry Cu–Au mineralization in the central Tibetan Plateau, and these porphyry deposits were formed during the final stages of the northward subduction of the Neo‐Tethys Ocean.     

碰撞造山型斑岩铜矿蚀变分带模式--以西藏冈底斯斑岩铜矿带为例

岛弧环境斑岩铜矿蚀变分带模式已为人们所熟知 ,但碰撞造山环境的斑岩铜矿蚀变分带特征尚不清楚。对此 ,文中以西藏冈底斯斑岩铜矿带为例 ,选择驱龙、冲江、厅宫 3个典型斑岩铜矿 ,对其蚀变系统进行了系统研究。依据蚀变矿物组合可分为 3个蚀变带 ,呈环带状分布。从中心向外依次为钾硅酸盐化带、石英绢云母化带、青磐岩化带。泥化带不太发育 ,通常叠加在其它蚀变带之上。钾硅酸盐化带主要蚀变矿物为钾长石、黑云母、石英、硬石膏 ,伴有大量的黄铜矿与辉钼矿 ,是成矿物质的主要堆积区。石英绢云母化带与钾硅酸盐化带渐变过渡或叠加其上 ,是次于钾硅酸盐化带的储矿部位。蚀变矿物组合为绢云母 +石英 +钾长石 ,金属硫化物有黄铁矿、黄铜矿、辉钼矿、斑铜矿 ,少量的方铅矿、闪锌矿。主要的辉钼矿以石英 +辉钼矿脉的形式出现于本矿带。青磐岩化在斑岩体内不发育 ,矿化极微弱。蚀变岩石组分分析表明 ,岩石蚀变及其分带是岩浆流体 /岩石反应时K ,Na ,Ca ,Mg等组分迁移的结果 ,矿化伴随着蚀变发生。钾硅酸盐化带、石英绢云母化带和青磐岩化带的蚀变岩石与未 (弱 )蚀变斑岩具有一致的稀土配分模式 ,REE含量有规律地变化 ,说明蚀变岩石均经历了源于岩浆的流体的交代 ,不同的蚀变形成于岩浆流体演化的不同阶段。蚀?     

Characteristics of Porphyry Cu Mineralization at Waisoi (Namosi District), Viti Levu, Fiji

The porphyry Cu deposits at Waisoi in Namosi district, Viti Levu are separated into two deposits: the Waisoi East deposit and the Waisoi West deposit. In the Waisoi East deposit, quartz porphyry is exposed and in the Waisoi West deposit, diorite porphyry is sporadically exposed in addition to a small body of quartz porphyry. The mineralization in the Waisoi East deposit is characterized by the bornite–chalcopyrite–pyrite assemblage associated with traces of molybdenite and native gold. Polyphase fluid inclusions in stockwork quartz veinlets show homogenization temperatures ranging from 210 to >500°C. The high‐grade Cu mineralization in the Waisoi West deposit is characterized by the bornite–chalcopyrite–pyrite assemblage accompanied with sheeted and stockwork quartz veinlets. Polyphase fluid inclusions occasionally containing hematite flakes in quartz veinlets in the center of the Waisoi West deposit homogenize at temperatures ranging from 450°C to >500°C. However, fluid inclusions in stockwork quartz veinlets in the periphery, homogenize at lower temperatures around 210°C. Both in the Waisoi East and Waisoi West deposits, primary bornite–chalcopyrite–pyrite assemblage in the high Cu‐grade zone was deposited at the upper stability limit of chalcopyrite with respect to sulfur fugacity. Thus, the principal Cu mineralization at the Waisoi deposits occurred at a relatively high sulfur fugacity, that is, in a high‐sulfidation environment.     

Formation of albitite-hosted uranium within IOCG systems: the Southern Breccia,Great Bear magmatic zone,Northwest Territories,Canada

Uranium and polymetallic U mineralization hosted within brecciated albitites occurs one kilometer south of the magnetite-rich Au–Co–Bi–Cu NICO deposit in the southern Great Bear magmatic zone (GBMZ), Canada. Concentrations up to 1 wt% U are distributed throughout a 3 by 0.5 km albitization corridor defined as the Southern Breccia zone. Two distinct U mineralization events are observed. Primary uraninite precipitated with or without pyrite–chalcopyrite?±?molybdenite within magnetite–ilmenite–biotite–K-feldspar-altered breccias during high-temperature potassic–iron alteration. Subsequently, pitchblende precipitated in earthy hematite–specular hematite–chlorite veins associated with a low-temperature iron–magnesium alteration. The uraninite-bearing mineralization postdates sodic (albite) and more localized high-temperature potassic–iron (biotite–magnetite ± K-feldspar) alteration yet predates potassic (K-feldspar), boron (tourmaline) and potassic–iron–magnesium (hematite ± K-feldspar ± chlorite) alteration. The Southern Breccia zone shares attributes of the Valhalla (Australia) and Lagoa Real (Brazil) albitite-hosted U deposits but contains greater iron oxide contents and lower contents of riebeckite and carbonates. Potassium, Ni, and Th are also enriched whereas Zr and Sr are depleted with respect to the aforementioned albitite-hosted U deposits. Field relationships, geochemical signatures and available U–Pb dates on pre-, syn- and post-mineralization intrusions place the development of the Southern Breccia and the NICO deposit as part of a single iron oxide alkali-altered (IOAA) system. In addition, this case example illustrates that albitite-hosted U deposits can form in albitization zones that predate base and precious metal ore zones in a single IOAA system and become traps for U and multiple metals once the tectonic regime favors fluid mixing and oxidation-reduction reactions.     

Variation of Cl and SO3 Contents of Microphenocrystic Apatite in Intermediate to Silicic Igneous Rocks of Cenozoic Japanese Island Arcs: Implications for Porphyry Cu Metallogenesis in the Western Pacific Island Arcs

Abstract. Determinations of SO₃ and Cl contents of igneous accessory apatite were carried out on Late Cenozoic intermediate to silicic intrusive and volcanic rocks in the Japanese island arcs of the western Pacific rim including the southwestern Kuril arc (eastern Hokkaido), Northeast Japan arc (southwestern Hokkaido through northeastern Honshu to central Honshu), Izu‐Bonin arc, Kyushu‐Palau ridge, Southwest Japan arc (northern Kyushu) and northern Ryukyu arc (southern Kyushu). These were compared to those from the Western Luzon arc, Philippines, to better understand the metallogenesis of porphyry Cu deposits in the western Pacific island arcs. In addition, SO₃ and Cl contents of accessory apatite in the Cretaceous magnetite‐series granitic rocks in the Kitakami belt (northeastern Honshu) and the Miocene ilmenite‐series granitic rocks in the Outer Zone of Southwest Japan (southern Kyushu) were also examined. Microphenocrystic apatites in shallow intrusions associated with porphyry Cu deposits in the Western Luzon arc contain >0.1 wt% S as SO₃. Such high SO₃ contents of microphenocrystic apatite are a common characteristic of hydrous mag‐matism in the Western Luzon arc, from 15 Ma old tonalitic plutonic rocks of the Luzon Central Cordillera to present‐day volcanism at Mount Pinatubo. The accessory apatite in intrusive rocks associated with porphyry Cu deposits, especially those at the Santo Tomas II deposit, show significantly high Cl contents (>2 wt%). The SO₃ contents of microphenocrystic apatite in most of the hydrous silicic rocks along the volcanic front, in andesites related to native sulfur deposits, and in Miocene and younger shallow granitic intrusions in northeastern Honshu, are generally <0.1 wt%. On the other hand, the SO₃ contents of apatite in such rocks from eastern Hokkaido, southwestern Hokkaido, Izu, northern Kyushu and southern Kyushu are similar to those from the Western Luzon arc. The SO₃ contents of accessory apatite in the Cretaceous magnetite‐series granitic rocks in the Kitakami belt are variable, whereas those of the Miocene ilmenite‐series granitic rocks in southern Kyushu are extremely low. The Cl contents of accessory apatite in some rocks of the Northeast Japan arc, Izu‐Bonin arc and Southwest Japan arc are significantly high. In terms of the Cl and SO₃ contents of microphenocrystic apatite, Cenozoic Japanese arc magmatism show similarities with arc magmatism associated elsewhere with porphyry Cu mineralization, except for the most of northeastern Honshu of the Northeast Japan arc. Apatite commonly occurs as inclusions in other phenocrystic phases. Thus the variation in SO₃ contents of apatite is a feature of early stage magmatic differentiation. The SO₃ contents of microphenocrystic apatite are considered to reflect the redox state of the magma source region or fluids encountered during magma generation.     

Characteristics of Mineralizing Fluids of the Darreh‐Zerreshk and Ali‐Abad Porphyry Copper Deposits,Central Iran,Determined by Fluid Inclusion Microthermometry

The Darreh‐Zereshk (DZ) and Ali‐Abad (AB) porphyry copper deposits are located in southwest of the Yazd city, central Iran. These deposits occur in granitoid intrusions, ranging in composition from quartz monzodiorite through granodiorite to granite. The ore‐hosting intrusions exhibit intense hydrofracturing that lead to the formation of quartz‐sulfide veinlets. Fluid inclusions in hydrothermal quartz in these deposits are classified as a mono‐phase vapor type (Type I), liquid‐rich two phase (liquid + vapor) type (Type IIA), vapor‐rich two phase (vapor + liquid) type (Type IIB), and multi‐phase (liquid + vapor + halite + sylvite + hematite + chalcopyrite and pyrite) type (Types III). Homogenization temperatures (Th) and salinity data are presented for fluid inclusions from hydrothermal quartz veinlets associated with potassic alteration and other varieties of hypogene mineralization. Ore precipitation occurred between 150° to >600°C from low to very high salinity (1.1–73.9 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized are recognized; one which shows relatively high Th and lower salinity fluid (Type IIIa; Th_(L‐V) > Tm_(NaCl)); and one which shows lower Th and higher salinity (Type IIIb; Th_(L‐V) < Tm_(NaCl)). The high Th_(L‐V) and salinities of Type IIIa inclusions are interpreted to represent the initial existence of a dense fluid of magmatic origin. The coexistence of Type IIIb, Type I and Type IIB fluid inclusions suggest that these inclusions resulted either from trapping of boiling fluids and/or represent two immiscible fluids. These processes probably occurred as the result of pressure fluctuations from lithostatic to hydrostatic conditions under a pressure of 200 to 300 bar. Dilution of these early fluids by meteoritic water resulted in lower temperatures and low to moderate salinity (<20 wt% NaCl equiv.) fluids (Type IIA). Fluid inclusion analysis reveals that the hydrothermal fluid, which formed mineralized quartz veinlets in the rocks with potassic alteration, had temperatures of ～500°C and salinity ～50 wt% NaCl equiv. Cryogenic SEM‐EDS analyses of frozen and decrepitated ore‐bearing fluids trapped in the inclusions indicate the fluids were dominated with NaCl, and KCl with minor CaCl₂.     

巴基斯坦贾盖火山岩浆岩带斑岩型铜-金矿床地质特征、成矿作用及找矿潜力

贾盖火山岩浆岩带是巴基斯坦境内西部第二大岩浆弧,属于特提斯成矿域的重要组成部分之一。晚渐新世—中新世,随着新特提斯洋的闭合,阿拉伯板块、印度板块与欧亚板块不断碰撞。在持续的挤压条件下,巴基斯坦西部发育了一系列逆冲褶皱系统,并且先后经历了中—晚始新世(43~37 Ma)、早中新世(24~22 Ma和18~16 Ma)、中中新世(13~10 Ma)和晚中新世—早上新世(6~4 Ma)4次大规模的岩浆作用,形成了贾盖火山岩浆岩带,赋存有48个斑岩型铜金矿床(点)、远景区。根据区域地质及矿化情况,可将贾盖火山岩浆岩带内的斑岩型铜-金矿床分为东、西两部分。前者主要分布在贾盖侵入体的边缘或与围岩接触带中,矿体产于晚白垩世辛贾拉尼群碎屑岩和始新世贾盖侵入体中;后者则分布在索尔科侵入体的岩株中,矿体产于古新世和更年轻的碎屑岩和火山岩中。矿体主要与磁铁矿系列的石英闪长斑岩和花岗闪长斑岩相关,具有钙碱性系列的特征,围岩热液蚀变分带明显,自岩体中心向外依次为钾硅酸化(钾化)、泥化、石英绢云母化、青磐岩化。境内外斑岩铜矿产出特征显示,索尔科侵入岩可能符合"小岩体成大矿"的现实情况,贾盖侵入岩的大型复合岩基中也可能存在斑岩铜矿床,具有很好的找矿潜力。最新勘查资料显示,贾盖火山岩浆岩带已发现的48个矿床(点)、远景区可能都具有很好的找矿前景和巨大的资源潜力,如萨因达克、雷克迪克、塔拉鲁格、科·伊·达利尔等矿床(点)、远景区,以及Western War Chah斑岩体,尤其是贾盖火山岩浆岩带西部和Koh Dalil(Rackodiq)矿点。     

Distribution of gold and silver and its relation with hypogene ore minerals in the Esperanza porphyry deposit,Antofagasta Region,Chile

Modes of occurrence of Au‐ and Ag‐bearing phases and their relation with associated hypogene ore minerals were examined with the objective to elucidate Au‐Ag distribution at the Esperanza porphyry deposit in the Eocene Centinela copper belt, using ore‐microscope modal analysis, semi‐quantitative analyses by automated mineralogy, electron probe microanalysis, and secondary ion mass spectrometer. The Esperanza hypogene mineralization is characterized by early‐stage chalcopyrite‐rich veinlets in the potassic alteration zone and later polymetallic stage with tennantite and galena in the chlorite‐sericitic alteration zone. Only the early‐stage chalcopyrite contains fine‐grained electrum (Au₆₈Ag₃₂ ‐ Au₈₁Ag₁₉) and hessite (Ag₂Te), and thus yields positive correlations in Cu vs. Au and Cu vs. Ag grades that are clearly recognized in the hypogene sulfide zone. The early‐stage chalcopyrite grains frequently exhibit polysynthetic twinning suggestive of inversion from intermediate solid solution. These features suggest that the fine‐grained electrum and hessite are products exsolved in the cooling process with the intermediate solid solution to chalcopyrite inversion. In contrast, tennantite and galena of the later‐stage mineralization contain no detectable Ag, and it is thus proposed that the early‐stage inverted chalcopyrite is the principal storage of economically important precious metals.     

Generation and Evolution of Ore Fluids for Porphyry Cu-Au Mineralization of the Santo Tomas II (Philex) Deposit, Philippines

Abstract: The Santo Tomas II (Philex) deposit is a porphyry Cu‐Au deposit, located in the southern part of the Baguio mineral district, Benguet Province, northern Luzon, Philippines. The Santo Tomas II deposit is associated with an intrusive complex consisting of four rock types that are distinguished based on petrography. They are 1) post‐ore clinopyroxene‐bearing hornblende andesite porphyry, 2) ore‐generating hornblende andesite porphyry, 3) hornblende quartz diorite porphyry and 4) porphyritic hornblende quartz diorite. K‐Ar age of hydrothermal biotitization was estimated to be 1.5±0.4 Ma. A number of intrusive bodies having broadly similar petrography and K‐Ar age occur in the vicinity of the Santo Tomas II deposit, such as at Clifton, Ligay (Binang), Bumolo (Waterhole) and Philex Main Camp areas. The intrusions at the Santo Tomas II deposit and in the vicinity are characterized by high X_Mg (Mg/[Mg+Fe] atomic ratio, about 0.7 or higher) of mafic silicate phenocrysts such as hornblende, and high sulfur contents (> 0.2 wt% as SO₃) in accessory microphenocrystic apatite, suggesting a highly oxidizing condition. Sulfur is accommodated dominantly as oxidized species since the crystallization of phe‐nocrysts. Sub‐dendritic rim of tremolitic amphibole on hornblende phenocryst in the ore‐generating andesite porphyry at the Santo Tomas II deposit suggests interaction of magma and aqueous fluid(s) exsolved due to decompression during intrusion. Dissemination of magnetite is associated with hydrothermal biotitization and is followed by sheeted and stockwork quartz veinlets having silician magnetite and rare titanohematite instead of Cu‐Fe sulfides. The silician magnetite‐rich quartz veinlet was formed at f_O2 near the hematite‐magnetite buffer at nearly magmatic temperature, where sulfur dominantly existed as oxidized species such as SO₂. Chalcopyrite and bornite, which commonly exhibit micrographic texture often accompanying Pd telluride and native gold/Au‐rich electrum, are associated with subsequent anhydrite (‐quartz) veinlets and stringers. Both intermediate solid solution (iss) and bornite solid solution (bnss) are thought to have coprecipitated primarily at above 500°C based on fluid inclusion microthermometry and sulfur isotope thermometry applied for anhydrite and associated chal‐copyrite and bornite. The initial iss is considered to have converted to chalcopyrite partly replacing bnss during cooling. The hypersaline polyphase fluid inclusions abundantly found in the sheeted and stockwork quartz as well as anhydrite veinlets with scarce gaseous inclusions suggest that they have been trapped in the two aqueous fluid immiscible region. The western Luzon arc associated with porphyry Cu mineralization is characterized by oxidized hydrous magmatism and shallow emplacement, and by the source of sulfur enriched in ³⁴S.     

巴布亚新几内亚奥克泰迪铜金矿床成矿特征和控制因素

巴布亚新几内亚西部Fubilan山奥克泰迪矿床是一个世界级铜金矿床,在大地构造上位于新几内亚造山带的巴布亚褶皱带。该矿床的铜金矿化赋存于Fubilan二长斑岩及其周边的磁铁矿夕卡岩和硫化物夕卡岩中。矿石类型以原生硫化物矿石为主,金属矿物包括磁铁矿、黄铁矿、磁黄铁矿、白铁矿、黄铜矿、斑铜矿等。蚀变类型包括夕卡岩化、钾化、泥化和青盘岩化。矿床氧化次生富集带发育,表生矿石矿物为蓝辉铜矿、辉铜矿、自然铜、铜蓝和银金矿。成矿作用主要受区域构造、侵入杂岩体、Darai组灰岩地层、断裂等因素的控制。根据矿床的主岩、矿石特征、蚀变特征和控矿因素,认为该矿床成因类型属于较为典型的夕卡岩一斑岩型矿床。     

Ordovician Intrusive-related Gold-Copper Mineralization in West-Central New South Wales, Australia

Three major types of Ordovician intrusive-related gold-copper deposits are recognized in central-west New South Wales, Australia: porphyry, skarn and high sulphidation epithermal deposits. These deposits are mainly distributed within two Ordovician volcano-intrusive belts of the Lachlan Fold Belt: the Orange-Wellington Belt and the Parkes-Narromine Belt. Available isotopic age data suggest that mineralization of the three types of deposits is essentially coeval with the Ordovician intrusive rocks (480-430 Ma).Porphyry gold-copper deposits can be further divided into two groups. The first group is associated with monzonite showing shoshonitic features, represented by Cadia and Goonumbla. The second group is associated with diorite and dacite, including the Copper Hill and Cargo gold-copper deposits. Gold skarn is associated with Late Ordovician (430-439 Ma) monzonitic intrusive complexes in the Junction Reefs area (Sheahan-Grants, Frenchmans, and Cor-nishmens), Endeavour 6, 7 and 44, Big and Little Cadia     

Geological,mineralogical, and oxygen isotope studies of the Chandmani Uul iron oxide–copper–gold deposit in Dornogobi Province,Southeastern Mongolia

The Chandmani Uul deposit is located in Dornogovi province, Southeastern Mongolia. Iron oxide ores are hosted in the andesitic rocks of the Shar Zeeg Formation of Neoproterozoic to Lower‐Cambrian age. Middle‐ to Upper‐Cambrian bodies of granitic rocks have intruded into the host rocks in the western and southern regions of the deposit. The wall rocks around the iron oxide ore bodies were hydrothermally altered to form potassic, epidote, and sericite–chlorite alteration zones, and calcite and quartz veinlets are ubiquitous in the late stage. Since granitic rocks also underwent potassic alteration, the activity of the granitic rocks must have a genetic relation to the ore deposit. The ore mineral assemblage is dominated by iron oxides such as mushketovite, euhedral magnetite with concentric and/or oscillatory zoning textures, and cauliflower magnetite. Lesser amounts of chalcopyrite and pyrite accompany the iron oxides. Among all these products, mushketovite is dominant and is distributed throughout the deposit. Meanwhile, euhedral magnetite appears in limited amounts at relatively shallow levels in the deposit. By contrast, cauliflower magnetite appears locally in the deeper parts of the deposit, and is associated with green‐colored garnet and calcite. Sulfide minerals are ubiquitously associated with these iron oxides. The oxygen isotope (δ¹⁸O) values of all types of magnetite, quartz, and epidote were found to be ?5.9 to ?2.8‰, 10.5 to 14.9‰, and 3.6 to 6.6‰, respectively. The δ¹⁸O values of quartz–magnetite pairs suggest an equilibrium isotopic temperature near 300°C. The calculated values of δ¹⁸O for the water responsible for magnetite ranged from 2 to 10‰. All the data obtained in this study suggest that the iron oxide deposit at the Chandmani Uul is a typical iron oxide–copper–gold deposit, and that this deposit was formed at an intermediate depth with potassic and sericite–chlorite alteration zones under the oxidized conditions of a hematite‐stable environment. The δ¹⁸O range estimated implies that the ore‐forming fluid was supplied by a crystallizing granodioritic magma exsolving fluids at depth with a significant contribution of meteoric water.