自升式平台桩脚在含硬壳层地基中的插深分析

存在硬壳层的层状地基承载能力分析是自升式钻井平台桩脚插深分析的关键,但是目前对硬壳层承载能力的确定还没有成熟可行的理论计算方法。一般的针对非均质层状地基的承载力计算方法,因参数较多,计算步骤繁琐,很难广泛应用于实际的平台桩脚入泥深度分析中。文中主要介绍了存在硬壳层的层状地基承载力的分析方法与过程,根据应力扩散原理推导并做适当的简化得到硬壳层承载力修正方法。简化后的修正方法能满足一般硬壳层承载力分析的需要,并使平台插桩深度分析计算过程变得简便。通过在实际工程的应用,得到的实测结果与理论计算值也较为一致,说明了用此方法分析硬壳层地基的平台插桩是合理、实用的。     

Experimental investigation of the system behaviour of a model three-legged jack-up on clay

Results from combined loading experiments dedicated to evaluating the capacity and stiffness of a single footing have significantly improved the understanding of the response of circular shallow foundations. However, due to experimental practicalities, little corroborative evidence is available to confirm predicted behaviour when multiple footings act within a structural system. This paper addresses this concern by presenting the results of a series of experimental tests on a three-legged model jack-up unit founded on soft, heavily overconsolidated clay. The model adopted geometric features representative of a large prototype rig by appropriately scaling leg height, leg separation and flexural stiffness, as well as the ‘spudcan’ footing diameter and profile. Pushover events were considered by subjecting the model jack-up to monotonic horizontal loading at hull level. By measuring loads and displacements at the hull and at each spudcan, the system behaviour of the jack-up could be analysed. Nine separate tests were performed, revealing how load orientation, leg length and preload ratio changed the system capacity and affected the load–displacement paths of the jack-up and spudcan system. The test results are compared with those derived from single spudcan experiments, and are interpreted within the combined load yield surface approach gaining acceptance within the offshore industry.     

Design of A Bionic Spudcan and Analysis of Penetration and Extraction Performances for Jack-up Platform

The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan.     

自升式平台冰激动力响应分析

应用ANSYS软件建立了平台和冰相互作用的有限元模型,构建了自升式平台的冰激振动模型,并计算基于2种冰力模型的自升式平台的动力响应。此动力分析方法具有建模方便和计算精度高的特点。以某自升式平台为例,计算了冰和平台结构相互作用的耦合效应,为自升式平台冰激振动安全评估提供了参考依据。     

冰区自升式平台桩腿动强度的安全评估

应用ANSYS软件建立了自升式平台和冰相互作用的数学仿真模型,对自升式平台进行了动力分析和桩腿的极限强度和疲劳强度校核。应用本模型对渤海某自升式平台桩腿进行的强度校核和不同海冰参数下平台桩腿的冰激疲劳损伤实例分析表明,本文的研究结果为自升式平台冰激疲劳设计提供了一个有效的方法,并为自升式平台在冰区的使用提供了依据。     

具有结构-桩-土相互作用的海洋平台结构体系承载能力的概率分析

本文研究了桩在竖向荷载和横向荷载作用下承载能力的计算模型,给出了单桩承载能力的概率分析以及不同支承条件对海洋平台结构体系承载能力的影响;提出了具有结构－桩－土相互作用的海洋平台结构体系承载能力的概率特性和在极端荷载作用下海洋平台结构体系的可靠度计算方法。研究结果表明：对于桩支承海洋平台结构体系的承载能力,结构－桩－土相互作用的影响是不容忽视的,其偏差影响取决于土性的离散度。     

Evaluation method for Green jack-up drilling platform design scheme based on improved grey correlation analysis

This paper presents an evaluation method for green jack-up drilling platform(GJDP) design scheme based on the improved grey correlation analysis(IGCA). Under the situation of the low-carbon economy it is important and complicated for jack-up drilling platform design to select the optimum design scheme from the feasible schemes. In this paper, the evaluation index system for GJDP has been proposed which includes 3 factors: advanced technology, economic feasibility and environmental coordination, as well as 13 sub-indices. At the same time, a multi-objective combinatorial optimization model is established by using IGCA, in which the analysis hierarchy process (AHP) is used to obtain the weight values of the indices. The IGCA method is fully considered the connection of the indices reflecting the objective true nature of the things, and the subjective interest of the platform owner and the needs of the designer. This research can not only conduct to green design of jack-up drilling platform, but also can contribute to the development, popularization and application of low-carbon technology on offshore platform. Finally, the case study results demonstrate the feasibility and efficiency of the proposed evaluation method.     

自升式海洋平台地基强度稳定性分析

自升式海洋平台地基强度稳定性是保证作业安全的基本条件。结合土力学理论及有限元分析,提出一套较完整的地基强度稳定性分析方法,并结合一个实际算例,探讨影响地基强度稳定性的几个关键因素,对平台设计人员及使用者具有一定的参考价值。     

深海吸力锚水平极限承载力研究

深海吸力锚基础的极限承载能力是海洋工程锚固系统的一个关键问题。基于Coulomb摩擦接触对原理,给出一种模拟吸力锚承载能力的有限元模型。在该数值模型基础上,利用通用有限元分析软件ABAQUS,研究系泊点位置、吸力锚长径比对极限承载力的影响,并给出深海吸力锚失稳模式。结果表明,系泊点位置极大地影响着吸力锚的极限承载力与稳定性,系泊点位置的变化会导致吸力锚出现前倾转动、平移滑动和后仰转动失稳模式,同时吸力锚失稳模式受长径比的影响。为工程实际和理论分析提供了技术支持和理论指导。     

自升式钻井平台插桩深度探析

针时目前带桩靴的自升式桩基平台插桩深度计算中存在的问题,通过考虑插桩过程中桩靴对地层物理力学性质的影响,运用最小二乘法求得桩靴对地层承载力的影响系数,从而时Terzaghi和Peck公式进行修正,提高插桩深度预测的准确性.     

Recent contributions of geotechnical centrifuge modelling to the understanding of jack-up spudcan behaviour

The paper presents an overview of the recent contributions of centrifuge modelling to the understanding of soil-structure interaction and the development of design and predictive methods in the field of mobile jack-up drilling rig foundations. Both advantages and limitations of the centrifuge methods are detailed and key examples are presented. The benefits provided by centrifuge modelling to the development of analysis methods that are now being used within the jack-up industry are highlighted. To conclude, industry trends and research opportunities are discussed, as is the possible role of the geotechnical centrifuge in finding solutions to these new needs.     

梁板式高桩码头结构整体可靠度计算方法

在环境条件和使用荷载作用下,高桩码头结构损伤和承载力降低是普遍存在的问题。在役梁板式高桩码头结构安全评估,是保证港口设施安全运行的必要措施。结构整体可靠度是结构安全评估的核心指标,但目前尚未建立结构整体可靠度计算的有效方法。基于非线性有限元数值模型,采用蒙特卡罗模拟技术确定了典型梁板式高桩码头结构整体极限承载力概率分布模型及其统计参数,研究了损伤位置、损伤程度和损伤数量等对极限承载力概率分布及其统计参数的影响,明确了无损结构整体极限承载力概率分布模型及其统计参数可用于损伤结构分析。将结构整体极限承载力作为结构抗力随机变量,采用一次二阶矩法计算结构的可靠指标,建立了一种在役梁板式高桩码头结构整体可靠度计算的有效方法。     

自升式钻井平台拔桩机理探析

海上自升式钻井平台完成预定工作后,将收起桩靴迁航到下一个目的地,桩靴的拔出是由支撑状态向漂浮状态过渡的重要过程,是自升式钻井平台正常作业不可缺少的重要组成部分。在这个过程中,拔桩阻力的预测对于桩靴上拔安全至关重要。笔者通过对平台拔桩阻力进行分析,并结合中油海平台近几年的拔桩作业经验,提出了施工中的注意事项,具有一定的指导意义。     

基于拔桩能力的自升式平台海外作业优选

针对某海外项目中可能遇到的钻井平台压载后入泥深度过大和拔桩困难的问题,开展平台优选计算。首先搜集了预定作业井位周围井位的地质勘查资料,利用二次插值法进行作业井位地质勘察数据计算,据此计算了桩脚入泥深度,并根据作业平台结构参数计算了平台的拔桩阻力。为解决平台极限拔桩能力小于拔桩阻力的问题,设计了可控冲桩阀和冲桩系统以消除或减小桩靴底部的吸附力、桩靴侧部土体剪切力和桩靴上部土重。最后将平台拔桩能力与最终拔桩阻力进行对比,给出平台推荐结果。     

Discussion on key points of wind load of jack-up unit

The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for calculating the wind load. However, the calculated results are conservative and not good for structure optimization design. In this paper, a 400 ft jack-up is studied as an example. Based on the wind tunnel test and numerical simulation method, some key points of wind load calculation, such as shielding effect, lift effect and shape coefficient of component, are discussed. The study shows that the points mentioned above, which are ignored in the MODU rule calculation, result in the conservative result.     

海洋平台液压升降系统仿真研究

对平台液压升降模拟仿真系统研究的必要性进行分析,针对自升式平台作业工况和机理,提出总体设计方案,进行各部分的研究设计。在软件方面,建立虚拟仪器测试系统,该系统的建立实现了平台升降系统的仿真及液压阀件的测试。     

地基承载力特征值和桩端承载力特征值的比较研究

工程中常涉及到地基承载力特征值fa及桩端阻力qpa,作为同量纲的地基指标,对同一土层后者往往要比前者高得多。运用梅耶霍夫地基极限承载力理论,分析了随基础埋深的加大地基土破坏形式的变化,对浅基础及桩基础破坏形式、地基承载力特征值fa与桩端承载力特征值qpa作了对比。研究结果将有利于建立及区别地基承载力特征值及桩端端阻力特征值的物理概念,对实际工程具有指导意义。     

Influence of the Spudcan Angle on the Ultimate Bearing Capacity of Jack-up Platform

Jack-up platforms of the Ocean engineering structures always withstand the vertical gravity loads which are applied to the seabed by spudcan, so it is important to determine the bearing capacity and the penetration depth of the spudcan for its geometry. In fact, it is up to the deformation law and the failure modes of soil surrounding the spudcan which can calculate the ultimate bearing capacity of the spudcan foundation on the soil seabed. By using the finite element analysis software Abaqus, the deformation law of soil around the spudcan is analyzed in detail, and the failure modes of soil surrounding the spudcan foundation are achieved. At the same time, based on the limit equilibrium theory, by use of static permissible slip-line field, the ultimate bearing capacity of the spudcan foundation is analyzed and the lower limit solution is derived theoretically, and the effect of the spudcan angle on the ultimate bearing capacity is investigated. The numerical results are compared with those obtained by the theoretical formulas deduced in this paper. On the basis of the lower limit solutions in this paper, the effect of the spudcan angle on the ultimate bearing capacity is revealed, and a practical bearing capacity formula is given to take the effect of the spudcan angle into consideration.     

我国海洋资源环境承载力评价指标体系和评价方法

为促进我国海洋生态环境保护和海洋资源优化配置,文章结合已有研究成果,构建海洋资源环境承载力评价指标体系,并提出基于熵值法的评价方法。研究结果表明:海洋资源环境承载力评价指标体系包括目标层、3个要素层和18个指标层组成,其中海洋资源环境供给能力包括人均滨海湿地面积等6个评价指标,海洋资源环境承压能力包括海洋生物多样性等6个评价指标,人类经济社会发展能力包括人均海洋生产总值等6个评价指标;基于熵值法的评价方法包括评价指标标准化处理、评价指标权重确定和海洋资源环境承载力指数计算3个步骤;该评价指标体系和评价方法具有较强的可操作性,将在实践中逐渐完善。     

黏土地基上海洋平台桩靴峰值阻力上限分析

在自升式平台的预压载过程中，桩靴在层状地基上较易发生“穿刺”现象，很大程度上影响着平台的安全运行。准确地分析桩靴峰值阻力，避免平台桩靴发生“穿刺”是非常重要的。采用极限分析上限定理，合理构建运动许可速度场，从理论上推导了层状地基上桩靴峰值阻力的上限解答。为了进一步验证峰值阻力理论解答的准确性，采用ABAQUS有限元软件构建了“桩靴—弹塑性海床”的三维数值模型，对桩靴贯入海床的过程进行了数值模拟，分析桩靴周围土体的塑性变形演变规律，研究土体的破坏机理。研究结果表明：推导的桩靴峰值阻力上限解答，能够较好地计算层状地基极限承载能力，通过与离心机试验和数值结果对比，计算误差在18%以内；给出的运动许可速度场能够较好地反映桩靴周围土体破坏模式；桩靴阻力达到峰值时，下层软土中的土塞高度约为桩靴直径的0.2倍。