Temperature and Water Vapor Weighting Functions from Radiative Transfer Equation with Surface Emissivity and Solar Reflectivity

Linearization of Radiative Transfer Equation (RTE) is the key step in physical retrieval of atmospheric temperature and moisture profiles from InfRared (IR) sounder observations. In this paper, the successive forms of temperature and water vapor mixing ratio component weighting functions are derived by applying one term variation method to RTE with surface emissivity and solar reflectivity contained. Retrivals of temperature and water vapor mixing ratio profiles from simulated Atmospheric Infrared Sounder (AIRS) observations with surface emissivity and solar reflectivity are presented.     

RETRIEVING ATMOSPHERIC SOUNDING PROFILES AROUND TYPHOON YUNNA USING INFRARED HYPERSPECTRAL MEASUREMENTS AIRS

In this study,we derived atmospheric profiles of temperature,moisture,and ozone,along with surface emissivity,skin temperature,and surface pressure,from infrared-sounder radiances under clear sky (cloudless) condition.Clouds were detected objectively using the Atmospheric Infrared Sounder under a relatively low spatial resolution and cloud-mask information from the Moderate Resolution Imaging Spectroradiometer under a high horizontal resolution;this detection was conducted using space matching.Newton’s nonlinear physical iterative solution technique is applied to the radiative transfer equation (RTE) to retrieve temperature profiles,relative humidity profiles,and surface variables simultaneously.This technique is carried out by using the results of an eigenvector regression retrieval as the background profile and using corresponding iterative forms for the weighting functions of temperature and water-vapor mixing ratio.The iterative forms are obtained by applying the variational principle to the RTE.We also compared the retrievals obtained with different types of observations.The results show that the retrieved atmospheric sounding profile has great superiority over other observations by accuracy and resolution.Retrieved profiles can be used to improve the initial conditions of numerical models and used in areas where conventional observations are sparse,such as plateaus,deserts,and seas.     

A COMPARISON OF THE RETRIEVAL OF ATMOSPHERIC TEMPERATURE PROFILES USING OBSERVATIONS OF THE 60 GHZ AND 118.75 GHZ ABSORPTION LINES

The Microwave Temperature Sounder-Ⅱ(MWTS-Ⅱ) and Microwave Humidity and Temperature Sounder(MWHTS) onboard the Fengyun-3 C(FY-3 C) satellite can be used to detect atmospheric temperature profiles. The MWTS-II has 13 temperature sounding channels around the 60 GHz oxygen absorption band and the MWHTS has 8 temperature sounding channels around the 118.75 GHz oxygen absorption line. The data quality of the observed brightness temperatures can be evaluated using atmospheric temperature retrievals from the MWTS-Ⅱ and MWHTS observations. Here, the bias characteristics and corrections of the observed brightness temperatures are described. The information contents of observations are calculated, and the retrieved atmospheric temperature profiles are compared using a neural network(NN) retrieval algorithm and a one-dimensional variational inversion(1 D-var) retrieval algorithm. The retrieval results from the NN algorithm show that the accuracy of the MWTS-Ⅱ retrieval is higher than that of the MWHTS retrieval, which is consistent with the results of the radiometric information analysis. The retrieval results from the 1 D-var algorithm show that the accuracy of MWTS-Ⅱ retrieval is similar to that of the MWHTS retrieval at the levels from 850-1,000 h Pa, is lower than that of the MWHTS retrieval at the levels from 650-850 h Pa and 125-300 h Pa, and is higher than that of MWHTS at the other levels. A comparison of the retrieved atmospheric temperature using these satellite observations provides a reference value for assessing the accuracy of atmospheric temperature detection at the 60 GHz oxygen band and 118.75 GHz oxygen line. In addition, based on the comparison of the retrieval results, an optimized combination method is proposed using a branch and bound algorithm for the NN retrieval algorithm, which combines the observations from both the MWTS-Ⅱand MWHTS instruments to retrieve the atmospheric temperature profiles. The results show that the optimal combination can further improve the accuracy of MWTS-Ⅱ retrieval and enhance the detection accuracy of atmospheric temperatures near the surface.     

Atmospheric profile retrieval with AIRS data and validation at the ARM CART site

The physical retrieval algorithm of atmospheric temperature and moisture distribution from the Atmospheric InfraRed Sounder （AIRS） radiances is presented. The retrieval algorithm is applied to AIRS clear-sky radiance measurements. The algorithm employs a statistical retrieval followed by a subsequent nonlinear physical retrieval. The regression coefficients for the statistical retrieval are derived from a dataset of global radiosonde observations （RAOBs） comprising atmospheric temperature, moisture, and ozone profiles. Evaluation of the retrieved profiles is performed by a comparison with RAOBs from the Atmospheric Radiation Measurement （ARM） Program Cloud And Radiation Testbed （CART） in Oklahoma, U. S. A.. Comparisons show that the physically-based AIRS retrievals agree with the RAOBs from the ARM CART site with a Root Mean Square Error （RMSE） of 1K on average for temperature profiles above 850 hPa, and approximately 10% on average for relative humidity profiles. With its improved spectral resolution, AIRS depicts more detailed structure than the current Geostationary Operational Environmental Satellite （GOES） sounder when comparing AIRS sounding retrievals with the operational GOES sounding products.     

Research on the Application of the Radiative Transfer Model Based on Deep Neural Network in One-dimensional Variational Algorithm

As a typical physical retrieval algorithm for retrieving atmospheric parameters, one-dimensional variational (1DVAR) algorithm is widely used in various climate and meteorological communities and enjoys an important position in the field of microwave remote sensing. Among algorithm parameters affecting the performance of the 1DVAR algorithm, the accuracy of the microwave radiative transfer model for calculating the simulated brightness temperature is the fundamental constraint on the retrieval accuracies of the 1DVAR algorithm for retrieving atmospheric parameters. In this study, a deep neural network (DNN) is used to describe the nonlinear relationship between atmospheric parameters and satellite-based microwave radiometer observations, and a DNN-based radiative transfer model is developed and applied to the 1DVAR algorithm to carry out retrieval experiments of the atmospheric temperature and humidity profiles. The retrieval results of the temperature and humidity profiles from the Microwave Humidity and Temperature Sounder (MWHTS) onboard the Feng-Yun-3 (FY-3) satellite show that the DNN-based radiative transfer model can obtain higher accuracy for simulating MWHTS observations than that of the operational radiative transfer model RTTOV, and also enables the 1DVAR algorithm to obtain higher retrieval accuracies of the temperature and humidity profiles. In this study, the DNN-based radiative transfer model applied to the 1DVAR algorithm can fundamentally improve the retrieval accuracies of atmospheric parameters, which may provide important reference for various applied studies in atmospheric sciences.     

Use of total precipitable water classification of a priori error and quality control in atmospheric temperature and water vapor sounding retrieval

This study investigates the use of dynamic a priori error information according to atmospheric moistness and the use of quality controls in temperature and water vapor profile retrievals from hyperspectral infrared (IR) sounders. Temperature and water vapor profiles are retrieved from Atmospheric InfraRed Sounder (AIRS) radiance measurements by applying a physical iterative method using regression retrieval as the first guess. Based on the dependency of first-guess errors on the degree of atmospheric moistness, the a priori first-guess errors classified by total precipitable water (TPW) are applied in the AIRS physical retrieval procedure. Compared to the retrieval results from a fixed a priori error, boundary layer moisture retrievals appear to be improved via TPW classification of a priori first-guess errors. Six quality control (QC) tests, which check non-converged or bad retrievals, large residuals, high terrain and desert areas, and large temperature and moisture deviations from the first guess regression retrieval, are also applied in the AIRS physical retrievals. Significantly large errors are found for the retrievals rejected by these six QCs, and the retrieval errors are substantially reduced via QC over land, which suggest the usefulness and high impact of the QCs, especially over land. In conclusion, the use of dynamic a priori error information according to atmospheric moistness, and the use of appropriate QCs dealing with the geographical information and the deviation from the first-guess as well as the conventional inverse performance are suggested to improve temperature and moisture retrievals and their applications.     

Remote Sensing of Tropical Cyclone Thermal Structure from Satellite Microwave Sounding Instruments: Impacts of Background Profiles on Retrievals

A variational retrieval system often requires background atmospheric profiles and surface parameters in its minimization process. This study investigates the impacts of specific background profiles on retrievals of tropical cyclone(TC) thermal structure. In our Microwave Retrieval Testbed(MRT), the K-means clustering algorithm is utilized to generate a set of mean temperature and water vapor profiles according to stratiform and convective precipitation in hurricane conditions. The Advanced Technology Microwave Sounder(ATMS) observations are then used to select the profiles according to cloud type. It is shown that the cloud-based background profiles result in better hurricane thermal structures retrieved from ATMS observations. Compared to the Global Positioning System(GPS) dropsonde observations, the temperature and specific humidity errors in the TC inner region are less than 3 K and 2.5 g kg~(–1), respectively, which are significantly smaller than the retrievals without using the cloud-based profiles. Further experiments show that all the ATMS observations could retrieve well both temperature and humidity structures, especially within the inner core region. Thus, both temperature and humidity profiles derived from microwave sounding instruments in hurricane conditions can be reliably used for evaluation of the storm intensity with a high fidelity.     

0-10 KM TEMPERATURE AND HUMIDITY PROFILES RETRIEVAL FROM GROUND-BASED MICROWAVE RADIOMETER

Deviation exists between measured and simulated microwave radiometer sounding data. The bias results in low-accuracy atmospheric temperature and humidity profiles simulated by Back Propagation artificial neural network models. This paper evaluated a retrieving atmospheric temperature and humidity profiles method by adopting an input data adjustment-based Back Propagation artificial neural networks model. First, the sounding data acquired at a Nanjing meteorological site in June 2014 are inputted into the MonoRTM Radiative transfer model to simulate atmospheric downwelling radiance at the 22 spectral channels from 22.234GHz to 58.8GHz, and we performed a comparison and analysis of the real observed data; an adjustment model for the measured microwave radiometer sounding data was built. Second, we simulated the sounding data of the 22 channels using the sounding data acquired at the site from 2011 to 2013. Based on the simulated rightness temperature data and the sounding data, BP neural network-based models were trained for the retrieval of atmospheric temperature, water vapor density and relative humidity profiles. Finally, we applied the adjustment model to the microwave radiometer sounding data collected in July 2014, generating the corrected data. After that, we inputted the corrected data into the BP neural network regression model to predict the atmospheric temperature, vapor density and relative humidity profile at 58 high levels from 0 to 10 km. We evaluated our model’s effect by comparing its output with the real measured data and the microwave radiometer’s own second-level product. The experiments showed that the inversion model improves atmospheric temperature and humidity profile retrieval accuracy; the atmospheric temperature RMS error is between 1K and 2.0K; the water vapor density’s RMS error is between 0.2 g/m3 and 1.93g/m3; and the relative humidity’s RMS error is between 2.5% and 18.6%.     

Retrieval of tropospheric co profiles using correlation radiometer: I. retrieval experiments for a clear atmosphere

This paper discusses the retrieval scheme associated with the gas correlated radiometer- MOPITT which will be on board of EOS-AM1 to measure the global vertical profiles of car-bon monoxide. The vertical resolution and retrieval errors caused by errors in the temperature profiles and in the surface temperature have been assessed. The main results are: a. Assuming the noise equivalent radiance (NER) of 1.8 × 105 W m-2 sr-1, the surface tem?perature can be deduced from the wide band signals with uncertainly less than 1 K, and the atmospheric term of the modulated signal can be deduced with errors almost equal to the NER which does not significantly increase errors in the retrieved CO profiles. b. With typical uncertainty in temperature profiles, errors in the retrieved profiles at lati-? tudes lower than 70o are generally less than 20% with the first guess of 100 ppbv. (If a better first guess was used, the errors may decrease). c. By incorporating the total column CO amount derived from the reflected solar radiation in 2.3 μm spectral region into the retrieval, the accuracy of the retrieved CO profile below 6 km may be greatly improved. d. In the retrieval experiment with 10 CO profiles representing the typical CO profiles, the r.m.s. relative / absolute errors of the retrieved CO profiles are about 10% / 15-20 ppbv.     

Calculation of updated coefficients for atmospheric temperature retrieval

In older to calculate updated coefficients for atmospheric temperature retrieval from satellite sounding data and radiosonde data, it is necessary to form statistical samples of real radiance and radiosonde data match-ups. A procedure is presented here for the data matchups. And a method of eigenvectors of statistical covariance matrices is used to produce updated coefficients for atmospheric temperature retrieval. The updated coefficients produced are tested using radiance observations from NOAA-7 satellite. Comparisons of these real-time retrieved data with radiosonde data show that the atmospheric temperature profiles retrieved have an accu-racy of RMS 2－3 degrees (oC). In addition, the error sources are also discussed.     

The Capability of Atmospheric Profile Retrieval from Satellite High Resolution Infrared Sounder Radiances

ＴｈｅＣａｐａｂｉｌｉｔｙｏｆＡｔｍｏｓｐｈｅｒｉｃＰｒｏｆｉｌｅＲｅｔｒｉｅｖａｌｆｒｏｍＳａｔｅｌｌｉｔｅＨｉｇｈＲｅｓｏｌｕｔｉｏｎＩｎｆｒａｒｅｄＳｏｕｎｄｅｒＲａｄｉａｎｃｅｓＬｉＪｕｎ（李俊）（Ｃｏｏｐｅｒａｔｉｖｅｉｎｓｔｉｔｕｔｅｆｏ...     

大气遥感辐射传输模式的一种有效的Jacobian算法

介绍并验证了一种快速、精确地计算Jacobian的解析方法(辐射传输方程的线性化,简称LR方法),将其结果与NAST-I真正的线性模式及数值方法(差分方法)的Jacobian值进行比较。结果表明,这种解析算法不仅快速、精确,而且独立于辐射传输方程,在有效Jacobian计算中只需要输入大气透过率,可适用于任何垂直探测器权重函数的计算。     

A New Temperature Channel Selection Method Based on Singular Spectrum Analysis for Retrieving Atmospheric Temperature Profiles from FY-4A/GIIRS

Hyperspectral data have important research and application value in the fields of meteorology and remote sensing.With the goal of improving retrievals of atmospheric temperature profiles, this paper outlines a novel temperature channel selection method based on singular spectrum analysis(SSA) for the Geostationary Interferometric Infrared Sounder(GIIRS), which is the first infrared sounder operating in geostationary orbit. The method possesses not only the simplicity and rapidity of the principal component analysis method, but also the interpretability of the conventional channel selection method. The novel SSA method is used to decompose the GIIRS observed infrared brightness temperature spectrum(700-1130 cm~(-1)), and the reconstructed grouped components can be obtained to reflect the energy variations in the temperature-sensitive waveband of the respective sequence. At 700-780 cm~(-1), the channels selected using our method perform better than IASI(Infrared Atmospheric Sounding Interferometer) and Cr IS(Cross-track Infrared Sounder)temperature channels when used as inputs to the neural network retrieval model.     

利用AIRS卫星资料反演大气廓线Ⅰ.特征向量统计反演法

引进美国威斯康星大学的IMAPP（International MODIS／AIRS Preprocessing Package）软件包，介绍了利用高光谱分辨率大气红外探测器AIRS（Atmospheric Infrared Sounder）观测辐射值，用特征向量统计法反演大气温度、湿度等垂直廓线的算法，采用亮度温度分类和扫描角分类回归后，减小了反演误差。并将其应用到中国地区，通过与无线电探空值及欧洲中期天气预报中心ECMWF（European Center of Medium-range Weather Forecasts）客观分析场的比较，结果表明：该方法所获得的温度、水汽反演结果与探空观测及ECMWF大气廓线分布一致，且AIRS因其高光谱分辨率（即高垂直空间分辨率）显示了精细的大气结构。     

A Study on Retrieving Atmospheric Profiles from EOS/AIRS Observations

1. IntroductionThe development of global climate and weathermodels requires accurate monitoring of atmospherictemperature and moisture profiles, as well as the con-tents of trace gases and aerosols. It is quite difficultto monitor continuously these parameters on a globalscale.Until recently. AIRS (Atmospheric InfraredSounder) offers a new opportunity to improve globalmonitoring of temperature, moisture, and ozone distri-butions and changes therein. The high spectral resolu-tion (v/Δv ? 12…     

晴空时大气红外遥感及其反演问题研究 II. 反演试验研究

前文给出了卫星红外观测资料的反演处理方法，并对方法作了理论上的分析，在本文中，我们将此方法应用到TOVS、GOES-8实际资料及AIRS模拟观测资料处理中并重点对TOVS资料进行试验。在反演中，我们将大气温度廓线和水汽混合比（lnq）廓线用各自的经验正交函数（EOF）表示以提高反演的稳定性并缩短计算时间，同时采用一种过滤操作以加速迭代的收敛速度。除了用本文提出的方法对TOVS资料进行处理外，还用国际TOVS处理软件包（ITPP-4.0）对同样的资料进行反演。试验表明，本文方法的反演结果优于ITPP的结果。AIRS模拟反演结果表明，高分辨率红外垂直探测器的遥感精度能够达到温度1 K、水汽10%。     

Estimating the Retrievability of Temperature Profiles from Satellite Infrared Measurements

A method is developed to assess retrievability, namely the retrieval potential for atmospheric temperature profiles, from satellite infrared measurements in clear-sky conditions. This technique is based upon generalized linear inverse theory and empirical orthogonal function analysis. Utilizing the NCEP global temperature reanalysis data in January and July from 1999 to 2003, the retrievabilities obtained with the Atmospheric Infrared Sounder （AIRS） and the High Resolution Infrared Radiation Sounder/3 （HIRS/3） sounding channel data are derived respectively for each standard pressure level on a global scale. As an incidental result of this study, the optimum truncation number in the method of generalized linear inverse is deduced too. The results show that the retrievabilities of temperature obtained with the two datasets are similar in spatial distribution and seasonal change characteristics. As for the vertical distribution, the retrievabilities are low in the upper and lower atmosphere, and high between 400 hPa and 850 hPa. For the geographical distribution, the retrievabilities are low in the low-latitude oceanic regions and in some regions in Antarctica, and relatively high in mid-high latitudes and continental regions. Compared with the HIRS/3 data, the retrievability obtained with the AIRS data can be improved by an amount between 0.15 and 0.40.