Reappraisal of Precambrian sheet‐braided rivers: Evidence for 1·9 Ga deep‐channelled drainage

The repetitive sedimentology of many Precambrian sheet‐dominated fluvial sandstones favoured their attribution to unconfined depositional processes. This article presents outcrop evidence for deep‐channelled drainage in the 1·9 Ga Burnside River Formation of Kilohigok Basin, Arctic Canada. On the ground, sheet‐like sandbodies with ubiquitous cross‐bedding are at first consistent with classic, unconfined depositional models. However, satellite and oblique‐aerial imagery of sections up to 15 km wide and 500 m thick reveals the occurrence of incised palaeovalleys hosting clustered, kilometre‐scale, channel bodies with attached large foreset bars pointing to downstream‐lateral accretion, sand sheets with aspect ratios (i.e. width to thickness) as high as 2500, and scattered aeolian intervals. The genetic association of these architectural elements points to aggradational fluvial piedmonts composed of low‐relief unit bars generated by braidplain channels several metres deep. Preservation of aeolianites was facilitated by fluctuating groundwater table and accommodation. Fluvial piedmonts were transected by weakly sinuous channel belts up to 25 m deep and characterized by through‐going or tributary planform. Aspect ratios comparable with those of late Palaeozoic to modern braided channels disprove the inference that all Precambrian streams readily widened in response to increased discharge. Previous facies models for large‐scale Precambrian sheet‐braided rivers failed to depict entire channel forms, possibly because they could not be resolved by ground‐based observations. Based on their limited geomorphic variability and abundance of architectural elements with very high aspect ratios, this study recommends that large sheet‐braided fluvial systems should still be considered separately from their post‐Silurian (i.e. vegetated) braided counterparts. Parallels between sheet‐braided and modern dryland rivers do not, however, reconcile with the deep, perennial, channelized processes described here. Yet, distal sand‐bed and perennial reaches of modern sandur plains remain the closest analogue to sheet‐braided rivers. This conjecture contradicts the assumption that all Precambrian rivers were prone to simulate seasonal behaviours independently from their actual climate regime.     

南苏丹Melut盆地Palogue油田古近系Yabus组河型演化规律及主控因素分析*

针对南苏丹Melut盆地Palogue油田Yabus组独特的辫状河—曲流河沉积体系,利用定量统计和成因动态分析方法,通过引入“微相砂体密度”变量,深入总结了辫状河和曲流河不同的垂向岩相序列,从空间演化角度详细阐述了辫状河和曲流河的差异沉积过程及其河型转化规律,建立了同一物源体系下不同阶段河型转化的沉积模式,并明确了河型转化的主控因素。研究表明: Yabus组河流沉积体系先后经历了3个演化阶段。早期辫状河形成阶段,沉积物顺流加积形成垂向沙坝;中期辫—曲交汇沉积阶段,河流下切作用明显减弱,河流沉积作用转变为侧向加积,在辫状河道中形成斜列砂坝,且辫流坝开始向河道边部迁移形成曲流河点坝;晚期曲流河发育阶段,河道弯度大且砂体沉积规模小。     

River functioning prior to the rise of land plants: A uniformitarian outlook

The study of geomorphic processes in barren landscapes, Precambrian and modern, has wide implications for planetary science. A long‐held status quo has been that, prior to the Palaeozoic evolution of vegetation, fluvial channels would have been invariably shallow, wide, braided in planform and flashier in discharge than vegetated ones. These assumptions are challenged through a threefold analysis of channel morphometry, discharge regimes and planform style. Measurements of modern and Proterozoic channel sections reveal overlapping morphometric ranges irrespective of climate and vegetation, pointing to shared scalar properties. Discharge regimes and planform styles inferred from Proterozoic records are akin to the spectrum observed in modern systems. Current criteria employed to identify meandering planforms are biased towards mud‐prone systems, and fail to address the sand‐rich nature of prevegetation alluvium. Vegetation forcing on river functioning cannot be entirely downplayed, although available data are construed towards an uniformitarian appraisal of pre‐Silurian fluvial dynamics.     

Unincised fluvial and tide-dominated estuarine systems from the Mesoproterozoic Lower Tombador Formation,Chapada Diamantina basin,Brazil

The Mesoproterozoic Lower Tombador Formation is formed of shallow braided fluvial, unconfined to poorly-channelized ephemeral sheetfloods, sand-rich floodplain, tide-dominated estuarine, and shallow marine sediments. Lowstand braided fluvial deposits are characterized by a high degree of channel amalgamation interbedded with ephemeral, intermediate sheetflood sandstones. Sand-rich floodplain sediments consist of intervals formed by distal sheetflood deposits interbedded with thin layers of eolian sandstones. Tide-dominated estuarine successions are formed of tide-influenced sand-bed braided fluvial, tidal channel, tidal sand flat and tidal bars. Shallow marine intervals are composed of heterolithic strata and tidal sand bars. Seismic scale cliffs photomosaics calibrated with vertical sections indicate high lateral continuity of sheet-like depositional geometry for fluvial–estuarine successions. These geometric characteristics associated with no evidence of incised-valley features nor significant fluvial scouring suggest that the Lower Tombador Formation registers deposition of unincised fluvial and tide-dominated systems. Such a scenario is a natural response of the interplay between sedimentation and fluctuations of relative sea level on the gentle margins of a sag basin. This case study indicates that fluvial–estuarine successions exhibit the same facies distributions, irrespective of being related to unincised or incised-valley systems. Moreover, this case study can serve as a starting point to better understand the patterns of sedimentation for Precambrian basins formed in similar tectonic settings.     

Recognition of strong seasonality and climatic cyclicity in an ancient,fluvially dominated,tidally influenced point bar: Middle McMurray Formation,Lower Steepbank River,north‐eastern Alberta,Canada

Inclined heterolithic stratification in the Lower Cretaceous McMurray Formation, exposed along the Steepbank River in north‐eastern Alberta, Canada, accumulated on point bars of a 30 to 40 m deep continental‐scale river in the fluvial–marine transition. This inclined heterolithic stratification consists of two alternating lithologies, sand and fine‐grained beds. Sand beds were deposited rapidly by unidirectional currents and contain little or no bioturbation. Fine‐grained beds contain rare tidal structures, and are intensely bioturbated by low‐diversity ichnofossil assemblages. The alternations between the sand and fine‐grained beds are probably caused by strong variations in fluvial discharge; that are believed to be seasonal (probably annual) in duration. The sand beds accumulated during river floods, under fluvially dominated conditions when the water was fresh, whereas the fine‐grained beds accumulated during the late stages of the river flood and deposition continued under tidally influenced brackish‐water conditions during times of low‐river flow (i.e. the interflood periods). These changes reflect the annual migration in the positions of the tidal and salinity limits within the fluvial–marine transition that result from changes in river discharge. Sand and fine‐grained beds are cyclically organized in the studied outcrops forming metre‐scale cycles. A single metre‐scale cycle is defined by a sharp base, an upward decrease in sand‐bed thickness and upward increases in the preservation of fine‐grained beds and the intensity of bioturbation. Metre‐scale cycles are interpreted to be the product of a longer term (decadal) cyclicity in fluvial discharge, probably caused by fluctuations in ocean or solar dynamics. The volumetric dominance of river‐flood deposits within the succession suggests that accumulation occurred in a relatively landward position within the fluvial–marine transition. This study shows that careful observation can reveal much about the interplay of processes within the fluvial–marine transition, which in turn provides a powerful tool for determining the palaeo‐environmental location of a deposit within the fluvial–marine transition.     

Architecture and morphodynamics of a 1·6 Ga fluvial sandstone: Ellice Formation of Elu Basin,Arctic Canada

Precambrian fluvial deposits have been traditionally described as architecturally simple, forming shallow and wide braidplains with sheet‐like geometry. The varied architecture and morphodynamics of the 1·6 Ga Ellice Formation of Elu Basin, Nunavut, Canada, are examined from detailed studies of section and planform exposures along coastal platforms and stepped cliffs. The Ellice Formation overlies older Proterozoic sandstones and Archean crystalline rocks, recording sedimentation in fluvial, aeolian, coastal and nearshore‐marine environments. The fluvial deposits display palaeoflow towards the west/north‐west, while overlying shallow‐marine deposits record transgression towards the east/south‐east. The Ellice Formation displays dispersed palaeoflow at its base, and also at higher stratigraphic levels, where fluvial and aeolian deposits are associated. Elsewhere, mainly unimodal palaeoflow points to extensive low‐sinuosity fluvial deposition. Within the terrestrial deposits, fluvial, fluvial–aeolian and coastal architectural elements are recognized. Fluvial elements comprise cross‐bedded sandstone and minor conglomerate, exhibiting an overall fining‐upward trend with associated decrease in preservation, dimension and amalgamation of channel bodies. These motifs are interpreted to portray a shift in depositional environment from proximal trunk rivers to distal alluvial plains. Low‐sinuosity fluvial elements are the most common, and include major channel bodies, elongate side bars and mid‐channel bars with well‐developed scroll topography. High‐sinuosity channel‐bar complexes exhibit upbar‐flow rotation and yield evidence of bar expansion coupled with rotation and translation. Fluvial–aeolian elements are composed of aeolian dunes juxtaposed with isolated channel bodies and bank‐attached bars. Minor mixed fluvial–aeolian sheets record local deposition in unconfined settings (possibly floodbasins) or inter‐distributary highlands. Finally, coastal elements comprise small deltaic complexes composed of sand‐rich distributary‐channel bodies feeding heterolithic mouth bars. Overall, the sedimentary record of the Ellice Formation demonstrates an example from the Precambrian where alluvium was locally characterized by a higher geomorphic variability than previously recognized.     

Planform architecture,stratigraphic signature and morphodynamics of an exhumed Jurassic meander plain (Scalby Formation,Yorkshire, UK)

Modern fluvial meander plains exhibit complex planform transformations in response to meander‐bend expansion, downstream migration and rotation. These transformations exert a fundamental control on lithology and reservoir properties, yet their stratigraphic record has been poorly evaluated in ancient examples due to the lack of extensive three‐dimensional exposures. Here, a unique exhumed meander plain exposed to the north of Scarborough (Yorkshire, UK) is analysed in terms of architecture and morphodynamics, with the aim of developing a comprehensive model of facies distribution. The studied outcrop comprises tidal platforms and adjacent cliffs, where the depositional architecture of un‐tilted deposits was assessed on planform and vertical sections, respectively. In its broader perspective, this study demonstrates the potential of architectural mapping of extensive planform exposures for the reconstruction of ancient fluvial morphodynamics. The studied exhumed meander plain is part of the Scalby Formation of the Ravenscar Group, and originally drained small coastal incised valleys within the Jurassic Cleveland Basin. The meander plain is subdivided into two storeys that contain in‐channel and overbank architectural elements. In‐channel elements comprise expansional and downstream‐migrating point bars, point‐bar tails and channel fills. Overbank elements comprise crevasse complexes, levées, floodplain fines and lake fills. The evolution of the point bars played a significant role in dictating preserved facies distributions, with high flood‐stage nucleation and accretion of meander scrolls later reworked during waning flood‐stages. At a larger scale, meander belt morphodynamics were also a function of valley confinement and contrasts in substrate erodibility. Progressive valley infilling decreased the valley confinement, promoting the upward transition from prevalently downstream migrating to expansional meander belts, a transition associated with enhanced preservation of overbank elements. Strikingly similar relations between valley confinement, meander‐bend transformations and overbank preservation are observed in small modern meandering streams such as the Beaver River of the Canadian prairies and the Powder River of Montana (USA).     

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.     

黄河下游游荡段过流能力调整对水沙条件与断面形态的响应

河道过流能力与主槽形态有关，而主槽形态又取决于上游水沙条件，分析过流能力与这两者之间的关系对研究黄河下游游荡段河床演变规律有重要意义。从典型断面和河段平均两个尺度，定量分析了黄河下游游荡段1986—2015年平滩流量与水沙条件（来沙系数和水流冲刷强度）及汛前主槽形态（河相系数）之间的响应关系。结果表明：① 1986年至小浪底水库运行前，游荡段淤积严重，主槽萎缩，河道过流能力急剧下降，自小浪底水库运行后，游荡段发生强烈冲刷，其断面持续趋向窄深，过流能力逐年恢复；②建立了断面和河段平滩流量与水沙条件及河相系数的幂函数关系，二者相关系数均在0.5以上，但河段尺度相比于断面尺度的相关系数至少可提高17%；③河段平滩流量与前5年汛期平均水流冲刷强度及河相系数的相关系数接近0.94，相应计算公式能较好地反映平滩流量的变化过程，为分析其他河段平滩流量的变化提供了参考方法。     

黄河下游游荡段过流能力调整对水沙条件与断面形态的响应

河道过流能力与主槽形态有关,而主槽形态又取决于上游水沙条件,分析过流能力与这两者之间的关系对研究黄河下游游荡段河床演变规律有重要意义。从典型断面和河段平均两个尺度,定量分析了黄河下游游荡段1986-2015年平滩流量与水沙条件(来沙系数和水流冲刷强度)及汛前主槽形态(河相系数)之间的响应关系。结果表明:①1986年至小浪底水库运行前,游荡段淤积严重,主槽萎缩,河道过流能力急剧下降,自小浪底水库运行后,游荡段发生强烈冲刷,其断面持续趋向窄深,过流能力逐年恢复;②建立了断面和河段平滩流量与水沙条件及河相系数的幂函数关系,二者相关系数均在0.5以上,但河段尺度相比于断面尺度的相关系数至少可提高17%;③河段平滩流量与前5年汛期平均水流冲刷强度及河相系数的相关系数接近0.94,相应计算公式能较好地反映平滩流量的变化过程,为分析其他河段平滩流量的变化提供了参考方法。     

Fine‐grained meandering systems of the Lower Permian Clear Fork Formation of north‐central Texas,USA: Lateral and oblique accretion on an arid plain

Facies models that adequately represent the diverse range of fine‐grained fluvial systems are currently lacking from the literature. In this paper, the spectrum of these systems on the arid plains of western equatorial Pangea is explored, as well as the source and nature of the fine‐grained sediments. Eight fluvial elements in the Early Permian Clear Fork Formation of north‐central Texas represent channel systems up to 7 m deep with coarse basal deposits, three types of lateral‐accretion deposits and sandstone sheets, with laminated, disrupted and massive mudstones laid down in abandoned channels and on floodplains. The three fine‐grained fluvial styles represent a continuum between two end‐members: sustained lateral accretion of bedload composed of quartzose sediments and mud aggregates on point bars, and oblique accretion of suspended sediment on steep accretionary benches and banks with limited lateral migration. This spectrum is controlled, in part, by grain size and the proportion of suspended to bedload sediments. The presence of rarely documented swept ripples on exhumed accretion surfaces is attributed to rapid decline in water levels and downstream re‐entry of overbank floodwaters into the channel. Rill casts, roots and disrupted mudstones low down in channel bodies indicate periods of near‐dryness. Laterally extensive sheet sandstones were formed by episodic flows in broad, sandbed channels. The fluvial sediments were primarily intrabasinally sourced with extrabasinal sediments brought in during major floods from upland source areas or reworked from local storage in the basin, representing a supply limited system. The upward change in cement composition from mainly calcite and ankerite to dolomite and gypsum with minor celestine implies increasingly saline groundwater and progressive aridification, supporting Late Palaeozoic palaeoclimatic models. By integrating petrographic data with sedimentology, a plethora of information about ancient landscapes and climate is provided, allowing a fuller comparison between the Clear Fork Formation and modern dryland alluvial plains.     

Architecture and development of the alluvial sediments of the Upper Jurassic Tordillo Formation in the Cañada Ancha Valley, northern Neuquén Basin, Argentina

The Upper Jurassic Tordillo Formation at Cañada Ancha area, northern Neuquén Basin, Argentina, comprises a multi-stage suit of predominantly alluvial sediments that is heterolithic in nature. In that suit, several lithofacies, architectural elements, and bounding surfaces of different order have been identified and their lateral and vertical distribution characterized. This analysis allowed the differentiation of 3 main units (lower, middle and upper), 20 subunits (C-1 to C-20), and the characterization of their alluvial styles.The lower unit (which comprises subunits C-1 to C-4) is mainly formed by fine- to medium-grained sandstones, which become medium- to coarse-grained towards the top. These sandstones characterize settings ranging from floodplains with isolated, unconfined flows, to more complex, vertically stacked, multi-storey sheet sandstones of braided fluvial systems. The middle unit (C-5 to C-10) is dominated by pale brown-grey fine-to coarse-grained sands and medium size subangular to angular conglomerates, which reflect amalgamated complexes of sandstone sheets and downstream accretion macroforms. Remarkably, this alluvial sedimentation was episodically punctuated by volcaniclastic flows. The upper unit (C-11 to C-20) consists of finer sediments, mainly pink to white fine-to medium grained sandstones and red to green siltstones. Towards the top, bioturbation becomes important, and also the presence of volcanosedimentary flows is noticeable. Fluvial settings include braided sheet sandstones with waning flood deposits evolving to isolated high-sinuosity fluvial systems, with flash flood deposits. At the top of this unit, facies may suggest marine influence.Vertical changes in the fluvial style result from both climatic and tectonic controls. A semiarid to arid climate and the active tectonism linked to the eastward migration of the Andean volcanic arc determined major bounding surfaces, fluvial style evolution and the presence of the volcano-sedimentary deposits. Different stages of high and low subsidence rates has been deduced from the vertical stacking of sediments.     

A quantitative, three-dimensional depositional model of gravelly braided rivers

A quantitative, three‐dimensional depositional model of gravelly, braided rivers has been developed based largely on the deposits of the Sagavanirktok River in northern Alaska. These deposits were described using cores, wireline logs, trenches and ground‐penetrating radar profiles. The origin of the deposits was inferred from observations of: (1) channel and bar formation and migration and channel filling, interpreted from aerial photographs; (2) water flow during floods; and (3) the topography and texture of the river bed at low‐flow stage. This depositional model quantitatively represents the geometry of the different scales of strataset, the spatial relationships among them and their sediment texture distribution. Porosity and permeability in the model are related to sediment texture. The geometry of a particular type and scale of strataset is related to the geometry and migration of the bedform type (e.g. ripples, dunes, bedload sheets, bars) associated with deposition of the strataset. In particular, the length‐to‐thickness ratio of stratasets is similar to the wavelength‐to‐height ratio of associated bedforms. Furthermore, the wavelength and height of bedforms such as dunes and bars are related to channel depth and width. Therefore, the thickness of a particular scale of strataset (i.e. medium‐scale cross‐sets and large‐scale sets of inclined strata) will vary with river dimensions. These relationships between the dimensions of stratasets, bedforms and channels mean that this depositional model can be applied to other gravelly fluvial deposits. The depositional model can be used to interpret the origin of ancient gravelly fluvial deposits and to aid in the characterization of gravelly fluvial aquifers and hydrocarbon reservoirs.     

Distinct styles of fluvial deposition in a Cambrian rift basin

Process‐based and facies models to account for the origin of pre‐vegetation (i.e. pre‐Silurian) preserved fluvial sedimentary architectures remain poorly defined in terms of their ability to account for the nature of the fluvial conditions required to accumulate and preserve architectural elements in the absence of the stabilizing influence of vegetation. In pre‐vegetation fluvial successions, the repeated reworking of bars and minor channels that resulted in the generation and preservation of broad, tabular, stacked sandstone‐sheets has been previously regarded as the dominant sedimentary mechanism. This situation is closely analogous to modern‐day poorly vegetated systems developed in arid climatic settings. However, this study demonstrates the widespread presence of substantially more complex stratigraphic architectures. The Guarda Velha Formation of Southern Brazil is a >500 m‐thick synrift fluvial succession of Cambrian age that records the deposits and sedimentary architecture of three distinct fluvial successions: (i) an early rift‐stage system characterized by coarse‐grained channel elements indicative of a distributive pattern with flow transverse to the basin axis; and two coeval systems from the early‐ to climax‐rift stages that represent (ii) an axially directed, trunk fluvial system characterized by large‐scale amalgamated sandy braid‐bar elements, and (iii) a distributive fluvial system characterized by multi‐storey, sandy braided‐channel elements that flowed transverse to the basin axis. Integration of facies and architectural‐element analysis with regional stratigraphic basin analysis, palaeocurrent and pebble‐provenance analysis demonstrates the mechanisms responsible for preserving the varied range of fluvial architectures present in this pre‐vegetation, rift‐basin setting. Identified major controls that influenced pre‐vegetation fluvial sedimentary style include: (i) spatial and temporal variation in discharge regime; (ii) the varying sedimentological characteristics of distinct catchment areas; (iii) the role of tectonic basin configuration and its direct role in influencing palaeoflow direction and fluvial style, whereby both the axial and transverse fluvial systems undertook a distinctive response to syn‐depositional movement on basin‐bounding faults. Detailed architectural analyses of these deposits reveal significant variations in geometry, with characteristics considerably more complex than that of simple, laterally extensive, stacked sandstone‐sheets predicted by most existing depositional models for pre‐vegetation fluvial systems. These results suggest that the sheet‐braided style actually encompasses a varied number of different pre‐vegetation fluvial styles. Moreover, this study demonstrates that contemporaneous axial and transverse fluvial systems with distinctive architectural expressions can be preserved in the same overall tectonic and climatic setting.     

Architecture of a distal pre-vegetation braidplain: Cambrian middle member of the Wood Canyon Formation,southern Marble Mountains,California, USA

Architectural element analysis and detailed mapping of a 300 m along-strike exposure of the middle member Wood Canyon Formation, southern Marble Mountains, California, USA, provides new evidence for extensive braided–fluvial channel-belt deposits with adjacent overbank environments. Three-dimensional models constructed using ‘Structure from Motion’ techniques, combined with field-based observations, allowed interpretation of outcrop-scale trends, barforms, channel fills and fine-scale features. The ca 80 m thick member is divisible into five distinct units, including units M1 to M3 that form the bulk of the stratigraphy. Units are defined by stacking patterns of three facies associations (Facies Association 1 to Facies Association 3), each representing the product of a subenvironment within the fluvial system. In Facies Association 1, stacked cosets, interpreted as low-relief fluvial bars and channel fills, preserve vertical-accretion and downstream-accretion elements under unimodal north-north-west palaeoflow, with minor lateral accretion near bar edges. Deposits of Facies Association 2 to Facies Association 3, linked to overbank environments, are found only in unit M2, in the middle 27 m of the middle member. Floodplains, represented by Facies Association 2, include crumbly red-orange intervals of fine to medium-grained sandstone and thinner sets of cross-bedding than Facies Association 1, interbedded with thicker cross-stratification indicative of overbank splay or overland flow aggradation from adjacent channel belts during flood stage. Possible aeolian beds of Facies Association 3 preserve broad festooned trough cross-strata that average 23 cm in thickness; their small size, medium-grained sandstone and iron oxide cement suggest a high water table. The diverse assemblage of interpreted subenvironments, paired with bedform and facies patterns, implies a perennial fluvial system that gradually built large sand bars as the channel belt migrated and avulsed across an unconfined braided–fluvial reach, leaving the overbank area on its flanks subject to weathering and aeolian transport. Despite the occurrence of strata deposited in low-energy and ponded settings, and a marine influence proposed for nearby sections of middle member, no ichnofossils were encountered.     

Gravelly flood deposits of Irvine Creek, Ontario, Canada

In May 1974 a powerful flood flushed the Grand River basin, Ontario. The effects on the bedload were drastic in a narrow (30 m) and deep (40 m) rock walled and floored gorge near Elora, Ontario. Along Irvine Creek, the tributary occupying the gorge, the gravel cover was reworked in several types of bars, predominantly transverse and point bars. The bars formed very rapidly in response to essentially steady, non-uniform flow that developed during a brief period of high flood. Superimposed on major bars are several minor sedimentary features such as coarse transverse ribs, chute channels and bars, longitudinal ribs, imbrication clusters, backsets with well developed imbrication, that were formed under very high stream discharge. Structures like imbrication clusters, transverse ribs and small riffle bars require a ‘live bed’ situation to form, and they develop when stones come to a stop either because they cluster during transport, or because keystone effects occur along shallow channels. In Irvine Creek, very few sedimentary features were formed during waning and low flood stages: only some shadow deposits and a few Ostler lenses. The few fines that were available were lost downstream or filled in lower parts of gravel beds. This study confirms that in streams that experience strong seasonal fluctuations in discharge, bedforms that develop during high floods have a high probability of preservation. In gravelly deposits, foreset structures and plane beds are most commonly preserved, although they may be difficult to recognize in old deposits, which may appear massive, particularly if the gravel has been infilled with finer pebbles and sand. In the case of Irvine Creek, all deposits are organized, and lateral and vertical variations in textures, particularly imbrication and packing, are very useful in the recognition of sedimentary structures.     

Anatomy of an Upper Triassic continental to marginal‐marine system: the mixed siliciclastic–carbonate Travenanzes Formation (Dolomites,Northern Italy)

The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply.     

Changing late Holocene flooding frequencies on the Columbia River, Washington

Data from prehistoric fluvial deposits can be used to extend the flood history of a river valley beyond historical records, thus increasing our understanding of variability in large, low-frequency flood events and providing a valuable means for paleoenvironmental reconstruction. We have applied this form of analysis to fluvial deposits from an archaeological site on the upper Columbia River in the state of Washington dating from 120 A.D.^* to 1948 A.D. It was our expectation that, had flood frequencies remained constant, sedimentation event frequency would conform to an exponential function derived from the Wolman and Leopold model of vertical floodplain accretion. Our findings deviate from this model, showing that flood frequencies comparable to those of the twentieth century existed prior to 1020 A.D.^* and after 1390 A.D.^* Large floods were three to four times more common during the intervening centuries. On the basis of field evidence, we can rule out changing channel geometry, leaving climatic conditions as the most probable factors controlling this variation in flood frequency.     

The Ridgeway Conglomerate Formation of SW Wales,and its implications. The end of the Lower Old Red Sandstone?

The Devonian Old Red Sandstone Ridgeway Conglomerate Formation crops out in Pembrokeshire, SW Wales. It was deposited as part of a dryland alluvial fan, axial fluvial valley deposystem. It conformably overlies the mid Lochkovian Freshwater West Formation and probably predates deposition of the Lower Cosheston Group Mill Bay Formation indicating an Early Devonian (latest Lochkovian to earliest Pragian) age, rather than a Middle Devonian age as suggested by previous workers. It therefore represents the youngest preserved formation of the Milford Haven Group south of the Ritec Fault. The Formation thickens drastically into the Ritec Fault, indicating its control on sedimentation. The half‐graben topography initiated deposition of a hangingwall alluvial fan that was sourced from a southerly Lower Palaeozoic/Precambrian provenance within the present‐day Bristol Channel. The Formation is heterolithic in nature, with deposits on the fan reflecting a mixture of processes. Conglomerates were deposited primarily by laterally extensive sheetfloods, and as bars in low‐relief, laterally accreted channels. Sandstones were also predominantly deposited by sheetfloods. Gritty mudrocks in comparison demonstrate deposition by cohesive debris flows. The fan prograded northward and interfingered with a low‐gradient, high‐sinuosity fluvial channel system dominated by inclined and non‐inclined heterolithic stratification. Thinly laminated mudstone and sandstone interbeds were deposited in ephemeral fan‐toe and axial valley lakes that may have developed during sub‐humid climatic episodes. The lacustrine heterolithic association has associated matgrounds and possible ‘algal roll‐up’ structures. Calcretized peetee structures and root traces comprise a lake margin calcrete association. Fan gravels prograded into the axial fluvial valley during periods of increased sediment flux that may represent semi‐arid conditions and/or episodes of tectonic activity. Calcretes of varying development were established in both the fan and axial valley zones. Calcretes with lower stages of development are more proximal to the Ritec Fault reflecting decreased soil residence times and high deposition rates within the axial valley. More strongly developed soil profiles on the fan may indicate sequence boundaries associated with low sediment flux, or increased soil residence time due to active fan‐channel migration (the pedofacies concept). Groundwater calcretes have sharp‐based and layer‐bound calcrete profiles. Gully‐bed cements are locally developed within the fan gravels. Copyright © 2007 John Wiley & Sons, Ltd.