Plan‐form evolution of ancient meandering rivers reconstructed from longitudinal outcrop sections

The mode of channel‐bend transformation (i.e. expansion, translation, rotation or a combination thereof) has a direct bearing on the dimensions, shape, bedding architecture and connectivity of point‐bar sandstone bodies within a fluvial meander belt, but is generally difficult to recognize in vertical outcrops. This study demonstrates how the bend transformation mode and relative rate of channel‐floor aggradation can be deciphered from longitudinal outcrop sections aligned parallel to the meander‐belt axis, as a crucial methodological aid to the reconstruction of ancient fluvial systems and the development of outcrop analogue models for fluvial petroleum reservoirs. The study focuses on single‐storey and multi‐storey fluvial meander‐belt sandstone bodies in the Palaeogene piggyback Boyabat Basin of north‐central Turkey. The sandstone bodies are several hundred metres wide, 5 to 40 m thick and encased in muddy floodplain deposits. The individual channel‐belt storeys are 5 to 9 m thick and their transverse sections show lateral‐accretion bed packages representing point bars. Point bars in longitudinal sections are recognizable as broad mounds whose parts with downstream‐inclined, subhorizontal and upstream‐inclined bedding represent, respectively, the bar downstream, central and upstream parts. The inter‐bar channel thalweg is recognizable as the transition zone between adjacent point‐bar bedsets with opposing dip directions into or out of the outcrop section. The diverging or converging adjacent thalweg trajectories, or a trajectory migrating in up‐valley direction, indicate point‐bar broadening and hence channel‐bend expansion. A concurrent down‐valley migration of adjacent trajectories indicates channel‐bend translation. Bend rotation is recognizable from the replacement of a depositional riffle by an erosional pool zone or vice versa along the thalweg trajectory. The steepness of the thalweg trajectory reflects the relative rate of channel‐floor aggradation. This study discusses further how the late‐stage foreland tectonics, with its alternating pulses of uplift and subsidence and a progressive narrowing of the basin, has forced aggradation of fluvial channels and caused vertical stacking of meander belts.     

Architecture of a distal pre-vegetation braidplain: Cambrian middle member of the Wood Canyon Formation,southern Marble Mountains,California, USA

Architectural element analysis and detailed mapping of a 300 m along-strike exposure of the middle member Wood Canyon Formation, southern Marble Mountains, California, USA, provides new evidence for extensive braided–fluvial channel-belt deposits with adjacent overbank environments. Three-dimensional models constructed using ‘Structure from Motion’ techniques, combined with field-based observations, allowed interpretation of outcrop-scale trends, barforms, channel fills and fine-scale features. The ca 80 m thick member is divisible into five distinct units, including units M1 to M3 that form the bulk of the stratigraphy. Units are defined by stacking patterns of three facies associations (Facies Association 1 to Facies Association 3), each representing the product of a subenvironment within the fluvial system. In Facies Association 1, stacked cosets, interpreted as low-relief fluvial bars and channel fills, preserve vertical-accretion and downstream-accretion elements under unimodal north-north-west palaeoflow, with minor lateral accretion near bar edges. Deposits of Facies Association 2 to Facies Association 3, linked to overbank environments, are found only in unit M2, in the middle 27 m of the middle member. Floodplains, represented by Facies Association 2, include crumbly red-orange intervals of fine to medium-grained sandstone and thinner sets of cross-bedding than Facies Association 1, interbedded with thicker cross-stratification indicative of overbank splay or overland flow aggradation from adjacent channel belts during flood stage. Possible aeolian beds of Facies Association 3 preserve broad festooned trough cross-strata that average 23 cm in thickness; their small size, medium-grained sandstone and iron oxide cement suggest a high water table. The diverse assemblage of interpreted subenvironments, paired with bedform and facies patterns, implies a perennial fluvial system that gradually built large sand bars as the channel belt migrated and avulsed across an unconfined braided–fluvial reach, leaving the overbank area on its flanks subject to weathering and aeolian transport. Despite the occurrence of strata deposited in low-energy and ponded settings, and a marine influence proposed for nearby sections of middle member, no ichnofossils were encountered.     

Fine‐grained meandering systems of the Lower Permian Clear Fork Formation of north‐central Texas,USA: Lateral and oblique accretion on an arid plain

Facies models that adequately represent the diverse range of fine‐grained fluvial systems are currently lacking from the literature. In this paper, the spectrum of these systems on the arid plains of western equatorial Pangea is explored, as well as the source and nature of the fine‐grained sediments. Eight fluvial elements in the Early Permian Clear Fork Formation of north‐central Texas represent channel systems up to 7 m deep with coarse basal deposits, three types of lateral‐accretion deposits and sandstone sheets, with laminated, disrupted and massive mudstones laid down in abandoned channels and on floodplains. The three fine‐grained fluvial styles represent a continuum between two end‐members: sustained lateral accretion of bedload composed of quartzose sediments and mud aggregates on point bars, and oblique accretion of suspended sediment on steep accretionary benches and banks with limited lateral migration. This spectrum is controlled, in part, by grain size and the proportion of suspended to bedload sediments. The presence of rarely documented swept ripples on exhumed accretion surfaces is attributed to rapid decline in water levels and downstream re‐entry of overbank floodwaters into the channel. Rill casts, roots and disrupted mudstones low down in channel bodies indicate periods of near‐dryness. Laterally extensive sheet sandstones were formed by episodic flows in broad, sandbed channels. The fluvial sediments were primarily intrabasinally sourced with extrabasinal sediments brought in during major floods from upland source areas or reworked from local storage in the basin, representing a supply limited system. The upward change in cement composition from mainly calcite and ankerite to dolomite and gypsum with minor celestine implies increasingly saline groundwater and progressive aridification, supporting Late Palaeozoic palaeoclimatic models. By integrating petrographic data with sedimentology, a plethora of information about ancient landscapes and climate is provided, allowing a fuller comparison between the Clear Fork Formation and modern dryland alluvial plains.     

Signatures of climate vs. sea-level change within incised valley-fill successions: Quaternary examples from the Texas GULF Coast

The passive margin Texas Gulf of Mexico Coastal Plain consists of coalescing late Pleistocene to Holocene alluvial–deltaic plains constructed by a series of medium to large fluvial systems. Alluvial–deltaic plains consist of the Pleistocene Beaumont Formation, and post-Beaumont coastal plain incised valleys. A variety of mapping, outcrop, core, and geochronological data from the extrabasinal Colorado River and the basin-fringe Trinity River show that Beaumont and post-Beaumont strata consist of a series of coastal plain incised valley fills that represent 100 kyr climatic and glacio-eustatic cycles.

Valley fills contain a complex alluvial architecture. Falling stage to lowstand systems tracts consist of multiple laterally amalgamated sandy channelbelts that reflect deposition within a valley that was incised below highstand alluvial plains, and extended across a subaerially-exposed shelf. The lower boundary to falling stage and lowstand units comprises a composite valley fill unconformity that is time-transgressive in both cross- and down-valley directions. Coastal plain incised valleys began to fill with transgression and highstand, and landward translation of the shoreline: paleosols that define the top of falling stage and lowstand channelbelts were progressively onlapped and buried by heterolithic sandy channelbelt, sandy and silty crevasse channel and splay, and muddy floodbasin strata. Transgressive to highstand facies-scale architecture reflects changes through time in dominant styles of avulsion, and follows a predictable succession through different stages of valley filling. Complete valley filling promoted avulsion and the large-scale relocation of valley axes before the next sea-level fall, such that successive 100 kyr valley fills show a distributary pattern.

Basic elements within coastal plain valleys can be correlated with the record offshore, where cross-shelf valleys have been described from seismic data. Falling stage to lowstand channelbelts within coastal plain valleys were feeder systems for shelf-phase and shelf-margin deltas, respectively, and demonstrate that falling stage fluvial deposits are important valley fill components. Signatures of both upstream climate change vs. downstream sea-level controls are therefore interpreted to be present within incised valley fills. Signatures of climate change consist of the downstream continuity of major stratigraphic units and component facies, which extends from the mixed bedrock–alluvial valley of the eroding continental interior to the distal reaches, wherever that may be at the time. This continuity suggests the development of stratigraphic units and facies is strongly coupled to upstream controls on sediment supply and climate conditions within hinterland source regions. Signatures of sea-level change are critical as well: sea-level fall below the elevation of highstand depositional shoreline breaks results in channel incision and extension across the newly emergent shelf, which in turn results in partitioning of the 100 kyr coastal plain valleys. Moreover, deposits and key surfaces can be traced from continental interiors to the coastal plain, but there are downstream changes in geometric relations that correspond to the transition between the mixed bedrock–alluvial valley and the coastal plain incised valley. Channel incision and extension during sea-level fall and lowstand, with channel shortening and delta backstepping during transgression, controls the architecture of coastal plain and cross-shelf incised valley fills.     

Architecture and morphodynamics of a 1·6 Ga fluvial sandstone: Ellice Formation of Elu Basin,Arctic Canada

Precambrian fluvial deposits have been traditionally described as architecturally simple, forming shallow and wide braidplains with sheet‐like geometry. The varied architecture and morphodynamics of the 1·6 Ga Ellice Formation of Elu Basin, Nunavut, Canada, are examined from detailed studies of section and planform exposures along coastal platforms and stepped cliffs. The Ellice Formation overlies older Proterozoic sandstones and Archean crystalline rocks, recording sedimentation in fluvial, aeolian, coastal and nearshore‐marine environments. The fluvial deposits display palaeoflow towards the west/north‐west, while overlying shallow‐marine deposits record transgression towards the east/south‐east. The Ellice Formation displays dispersed palaeoflow at its base, and also at higher stratigraphic levels, where fluvial and aeolian deposits are associated. Elsewhere, mainly unimodal palaeoflow points to extensive low‐sinuosity fluvial deposition. Within the terrestrial deposits, fluvial, fluvial–aeolian and coastal architectural elements are recognized. Fluvial elements comprise cross‐bedded sandstone and minor conglomerate, exhibiting an overall fining‐upward trend with associated decrease in preservation, dimension and amalgamation of channel bodies. These motifs are interpreted to portray a shift in depositional environment from proximal trunk rivers to distal alluvial plains. Low‐sinuosity fluvial elements are the most common, and include major channel bodies, elongate side bars and mid‐channel bars with well‐developed scroll topography. High‐sinuosity channel‐bar complexes exhibit upbar‐flow rotation and yield evidence of bar expansion coupled with rotation and translation. Fluvial–aeolian elements are composed of aeolian dunes juxtaposed with isolated channel bodies and bank‐attached bars. Minor mixed fluvial–aeolian sheets record local deposition in unconfined settings (possibly floodbasins) or inter‐distributary highlands. Finally, coastal elements comprise small deltaic complexes composed of sand‐rich distributary‐channel bodies feeding heterolithic mouth bars. Overall, the sedimentary record of the Ellice Formation demonstrates an example from the Precambrian where alluvium was locally characterized by a higher geomorphic variability than previously recognized.     

Precambrian snapshots: Morphodynamics of Torridonian fluvial braid bars revealed by three‐dimensional photogrammetry and outcrop sedimentology

Pre‐vegetation fluvial channels have long been considered predominantly sheet‐like in geometry, owing to hydraulic sections that rapidly widened rather than incise during floods. This motif has been paralleled to that of modern dryland rivers subject to sharp discharge fluctuations during ephemeral floods. However, a number of Precambrian fluvial successions have been recently appraised as the product of deep‐channelled systems characterized by relatively stable – probably perennial – discharge regimes. One such example is the ca 1·0 Ga Applecross Formation, part of the well‐studied Torridon Group of Scotland. To contribute to this debate and to provide refined morphodynamic models for the Applecross Formation, this article presents an integration of three‐dimensional photogrammetry and outcrop sedimentology applied to key exposures at Stoer Peninsula, north‐western Scottish Highlands. Analysis of selected sandbodies reveals that high‐relief fluvial sand bars, both mid‐channel and bank‐attached, evolved within deep, braided‐channel belts. These bars grew through complex mechanisms of accretion and reactivation related to different flood stages: upstream and downstream accretion probably occurred during waning‐flood stages characterized by high hydrograph levels and abundant sediment availability; lateral accretion took place during later waning‐flood stages, and it was associated in some cases with helical recirculation and increase in bend sinuosity. Overall, the depicted morphodynamics are consistent with prolonged flood events that cannot be reconciled with sharply fluctuating discharge regimes. Critical comparisons between the internal geometry of the studied bars and modern counterparts corroborate the findings herein. Thus, this study recommends stricter comparisons between the products of modern braided channels and Precambrian fluvial rock records featuring thick and well‐developed bar forms.     

Facies model of a fine‐grained,tide‐dominated delta: Lower Dir Abu Lifa Member (Eocene), Western Desert,Egypt

Existing facies models of tide‐dominated deltas largely omit fine‐grained, mud‐rich successions. Sedimentary facies and sequence stratigraphic analysis of the exceptionally well‐preserved Late Eocene Dir Abu Lifa Member (Western Desert, Egypt) aims to bridge this gap. The succession was deposited in a structurally controlled, shallow, macrotidal embayment and deposition was supplemented by fluvial processes but lacked wave influence. The succession contains two stacked, progradational parasequence sets bounded by regionally extensive flooding surfaces. Within this succession two main genetic elements are identified: non‐channelized tidal bars and tidal channels. Non‐channelized tidal bars comprise coarsening‐upward sandbodies, including large, downcurrent‐dipping accretion surfaces, sometimes capped by palaeosols indicating emergence. Tidal channels are preserved as single‐storey and multilateral bodies filled by: (i) laterally migrating, elongate tidal bars (inclined heterolithic strata, 5 to 25 m thick); (ii) forward‐facing lobate bars (sigmoidal heterolithic strata, up to 10 m thick); (iii) side bars displaying oblique to vertical accretion (4 to 7 m thick); or (iv) vertically‐accreting mud (1 to 4 m thick). Palaeocurrent data show that channels were swept by bidirectional tidal currents and typically were mutually evasive. Along‐strike variability defines a similar large‐scale architecture in both parasequence sets: a deeply scoured channel belt characterized by widespread inclined heterolithic strata is eroded from the parasequence‐set top, and flanked by stacked, non‐channelized tidal bars and smaller channelized bodies. The tide‐dominated delta is characterized by: (i) the regressive stratigraphic context; (ii) net‐progradational stratigraphic architecture within the succession; (iii) the absence of upward deepening trends and tidal ravinement surfaces; and (iv) architectural relations that demonstrate contemporaneous tidal distributary channel infill and tidal bar accretion at the delta front. The detailed facies analysis of this fine‐grained, tide‐dominated deltaic succession expands the range of depositional models available for the evaluation of ancient tidal successions, which are currently biased towards transgressive, valley‐confined estuarine and coarser grained deltaic depositional systems.     

Point bar and floodplain formation of the meandering Beatton River, northeastern British Columbia, Canada

This study examines the morphology, sedimentology and genesis of the point bars and floodplain of the Beatton River. The formation of point bars occurs in distinct stages. An initial point bar platform composed mainly of coarse sediment is formed adjacent to the convex bank of a migrating meander bend, and is the base on which develops a single scroll bar of fine traction and suspended load. With continued sedimentation, the scroll bar grows, eventually supporting vegetation and becoming a floodplain ridge. Scroll bars form with greatest size and frequency in rapidly migrating bends, and the shape of the meander bend appears to determine both the location of the initial bar deposit, and its direction of growth up or downstream. Approximately one-half of the floodplain sediment is derived from suspended load, and the initiation of a scroll bar appears to be due to excessive deposition of suspended load in a zone of flow separation over a point bar platform. The critical flow condition for the initiation of a scroll bar does not occur with the same recurrence interval on different shaped meander bends, however, the average recurrence interval within the study reach is approximately every 30 years. Sedimentation rates on point bars and on the floodplain indicate two relatively distinct stages of floodplain alluviation. The most rapid is for surfaces less than 50 years old, although sediment accumulation still persists on surfaces up to 250 years in age. Although frequently flooded, surfaces older than this accumulate very little sediment. Despite 2–3 m of overbank deposition, the amplitude of floodplain ridges is maintained by secondary currents which sweep sediment from the swales towards the ridge crests.     

The anatomy of exhumed river-channel belts: Bedform to belt-scale river kinematics of the Ruby Ranch Member,Cretaceous Cedar Mountain Formation,Utah, USA

Many published interpretations of ancient fluvial systems have relied on observations of extensive outcrops of thick successions. This paper, in contrast, demonstrates that a regional understanding of palaeoriver kinematics, depositional setting and sedimentation rates can be interpreted from local sedimentological measurements of bedform and barform strata. Dune and bar strata, channel planform geometry and bed topography are measured within exhumed fluvial strata exposed as ridges in the Ruby Ranch Member of the Cretaceous Cedar Mountain Formation, Utah, USA. The ridges are composed of lithified stacked channel belts, representing at least five or six re-occupations of a single-strand channel. Lateral sections reveal well-preserved barforms constructed of subaqueous dune cross-sets. The topography of palaeobarforms is preserved along the top surface of the outcrops. Comparisons of the channel-belt centreline to local palaeotransport directions indicate that channel planform geometry was preserved through the re-occupations, rather than being obscured by lateral migration. Rapid avulsions preserved the state of the active channel bed and its individual bars at the time of abandonment. Inferred minimum sedimentation durations for the preserved elements, inferred from cross-set thickness distributions and assumed bedform migration rates, vary within a belt from one to ten days. Using only these local sedimentological measurements, the depositional setting is interpreted as a fluvial megafan, given the similarity in river kinematics. This paper provides a systematic methodology for the future synthesis of vertical and planview data, including the drone-equipped 2020 Mars Rover mission, to exhumed fluvial and deltaic strata.     

Formation of point bars through rising and falling flood stages: Evidence from bar morphology,sediment transport and bed shear stress

Flow processes and sediment transport in a channel bend and associated point bar have been studied in modern rivers, theoretical models and physical experiments: however, the relationship between flow process and point‐bar morphology has rarely been explained due to the complex nature of open channel flow. Plan‐view exposures of an ancient point‐bar complex, exposed at the top of the Cretaceous Ferron Sandstone Member of the Mancos Shale Formation, south‐central Utah, allowed reconstruction of bar morphology, sediment transport and bed shear stress, which were used to extrapolate flow processes. Studies of these outcrops show that compound point bars and scroll bars were probably formed during falling and rising flood stages, respectively. A simulation model of plan‐view channel form shows that channel dimensions, such as radius of curvature and sinuosity of the point‐bar complex, range between 205 m and 351 m and 1·04 and 1·22, respectively, throughout the evolution of the channel bend. Variations in strength of the helical flow were interpreted as the main control on facies architecture and bar morphology. Strong helical flow was related to the deposition of the scroll bars, while strength of helical flow is decreased for compound bars. The use of cross‐beds as a common palaeocurrent indicator was found to be inconsistent with mean flow directions and channel margin orientation.     

The application of high-resolution sequence stratigraphy to fluvial systems: a case study from the Upper Carboniferous Breathitt Group, eastern Kentucky, USA

The Pennsylvanian Pikeville, Hyden and Four Corners formations of the Breathitt Group in eastern Kentucky, USA, contain six major facies associations along with a number of subassociations. These facies associations are offshore siltstone, rhythmically bedded mouthbar heteroliths, predominantly fine-grained floodplain deposits, minor channel fills, major distributary channels and major, stacked fluvial bodies. The stacked fluvial bodies are incised into a variety of open marine and delta plain deposits, have widths of several kilometres and exhibit a range of sandy fill types. These fluvial complexes are interpreted as incised valley fills. Parasequences and parasequence sets are not identifiable. Nonetheless, it is possible to identify systems tracts on the basis of sequential position, facies associations and systematic changes in architectural style and sediment body geometries. The studied portion of the Breathitt Group comprises stacked 4th-order sequences, which occur in lowstand, transgressive and highstand sequence sets related to the development of a lower frequency base level cycle. In the lowstand sequence set, incision associated with successive 4th-order sequence boundaries has commonly removed all the HST and TST of the underlying sequences, such that succeeding 4th-order incised valley fills are amalgamated. Within the transgressive sequence set, incision is at a minimum and incised valley fills tend to stack discretely with the maximum amount of fine-grained TST and HST between them. The highstand sequence set is transitional between the lowstand and transgressive sequence sets in terms of the amount of transgressive and highstand deposits preserved. Incised valley fills tend to stack discretely.     

Architecture of a coarse‐grained channel–levée system: the Rosario Formation,Baja California,Mexico

Seafloor images of coarse‐grained submarine channel–levée systems commonly reveal complex braid‐plain patterns of low‐amplitude bedforms and zones of apparent bypass; however, mechanisms of channel evolution and the resultant channel‐fill architecture are poorly understood. At Playa Esqueleto the lateral relationships between various elements of a deep‐marine slope channel system are well‐exposed. Specifically, the transition from gravel‐dominated axial thalwegs to laterally persistent marginal sandstones and isolated gravel‐filled scours is revealed. Marginal sandstones pass into a monotonous thin‐bedded succession which built to form relatively low‐relief levées bounding the channel belt; in turn, the levées onlap the canyon walls. Three orders of confinement were important during the evolution of the channel system: (i) first‐order confinement was provided by the erosional canyon which confined the entire system; (ii) confined levées built of turbidite sandstones and mudstones formed the second‐order confinement, and it is demonstrated that these built from overspill at thalweg margins; and (iii) third‐order confinement describes the erosional confinement of coarse‐grained thalwegs and scours. Finer‐grained sediment was transported in suspension and largely was unaffected by topography at the scale of individual thalwegs. Facies and clast analyses of conglomerate overlying channel‐marginal scours reveal that they were deposited by composite gravity flows, which were non‐cohesive, grain‐dominant debris flows with more fluidal cores. These flows were capable of basal erosion but were strongly depositional; frictional freezing at flow margins built gravel levées, while the core maintained a more fluidal transport regime. The resultant architecture consists of matrix‐rich, poorly sorted levées bounding better‐sorted, traction‐dominated cores. The planform geometry is interpreted to have consisted of a low‐sinuosity gravel braid‐plain built by accretion around mid‐channel and bank‐attached bars. This part of the system may be analogous to fluvial systems; however, the finer‐grained sediment load formed thick suspension clouds, probably several orders of magnitude thicker than the relief of braid‐plain topography and therefore controlled by the levées and canyon wall confinement.     

Evolution and sedimentology of a channel fill in the sandy braided South Saskatchewan River and its comparison to the deposits of an adjacent compound bar

The depositional stratigraphy of within‐channel deposits in sandy braided rivers is dominated by a variety of barforms (both singular ‘unit’ bars and complex ‘compound’ bars), as well as the infill of individual channels (herein termed ‘channel fills’). The deposits of bars and channel fills define the key components of facies models for braided rivers and their within‐channel heterogeneity, knowledge of which is important for reservoir characterization. However, few studies have sought to address the question of whether the deposits of bars and channel fills can be readily differentiated from each other. This paper presents the first quantitative study to achieve this aim, using aerial images of an evolving modern sandy braided river and geophysical imaging of its subsurface deposits. Aerial photographs taken between 2000 and 2004 document the abandonment and fill of a 1·3 km long, 80 m wide anabranch channel in the sandy braided South Saskatchewan River, Canada. Upstream river regulation traps the majority of very fine sediment and there is little clay (< 1%) in the bed sediments. Channel abandonment was initiated by a series of unit bars that stalled and progressively blocked the anabranch entrance, together with dune deposition and stacking at the anabranch entrance and exit. Complete channel abandonment and subsequent fill of up to 3 m of sediment took approximately two years. Thirteen kilometres of ground‐penetrating radar surveys, coupled with 18 cores, were obtained over the channel fill and an adjacent 750 m long, 400 m wide, compound bar, enabling a quantitative analysis of the channel and bar deposits. Results show that, in terms of grain‐size trends, facies proportions and scale of deposits, there are only subtle differences between the channel fill and bar deposits which, therefore, renders them indistinguishable. Thus, it may be inappropriate to assign different geometric and sedimentological attributes to channel fill and bar facies in object‐based models of sandy braided river alluvial architecture.     

Interpreting complex fluvial channel and barform architecture: Carboniferous Central Pennine Province,northern England

The Bashkirian Lower Brimham Grit of North Yorkshire, England, is a fluvio‐deltaic sandstone succession that crops out as a complex series of pinnacles, the three‐dimensional arrangement of which allows high‐resolution architectural analysis of genetically‐related lithofacies assemblages. Combined analysis of sedimentary graphic log profiles, architectural panels and palaeocurrent data have enabled three‐dimensional geometrical relationships to be established for a suite of architectural elements so as to develop a comprehensive depositional model. Small‐scale observations of facies have been related to larger‐scale architectural elements to facilitate interpretation of the palaeoenvironment of deposition to a level of detail that has rarely been attempted previously, thereby allowing interpretation of formative processes. Detailed architectural panels form the basis of a semi‐quantitative technique for recording the variety and complexity of the sedimentary lithofacies present, their association within recognizable architectural elements and, thus, the inferred spatio‐temporal relationship of neighbouring elements. Fluvial channel‐fill elements bounded by erosional surfaces are characterized internally by a hierarchy of sets and cosets with subtly varying compositions, textures and structures. Simple, cross‐bedded sets represent in‐channel migration of isolated mesoforms (dunes); cosets of both trough and planar‐tabular cross‐bedded facies represent lateral‐accreting and downstream‐accreting macroforms (bars) characterized by highly variable, yet predictable, patterns of palaeocurrent indicators. Relationships between sandstone‐dominated strata bounded by third‐order and fifth‐order surfaces, which represent in‐channel bar deposits and incised channel bases, respectively, chronicle the origin of the preserved succession in response to autocyclic barform development and abandonment, major episodes of incision probably influenced by episodic tectonic subsidence, differential tilting and fluvial incision associated with slip on the nearby North Craven Fault system. Overall, the succession represents the preserved product of an upper‐delta plain system that was traversed by a migratory fluvial braid‐belt system comprising a poorly‐confined network of fluvial channels developed between major sandy barforms that evolved via combined lateral‐accretion and downstream‐accretion.     

Facies and architectural element analysis of a meandering fluvial succession: The Permian Warchha Sandstone, Salt Range, Pakistan

The 30 to 155 m thick Early Permian (Artinskian) Warchha Sandstone of the Salt Range, Pakistan is a conglomerate, sandstone and claystone succession within which seven lithofacies types (Gt, St, Sp, Sr, Sh, Fl and Fm) occur in a predictable order as repeated fining-upward cycles. Common sedimentary structures in the conglomerates and sandstones include planar and trough cross-bedding, planar lamination, soft sediment-deformed bedding, compound cosets of strata with low-angle inclined bounding surfaces and lags of imbricated pebbles. Structures in the finer-grained facies include desiccation cracks, raindrop imprints, caliche nodules and bioturbation. Groups of associated facies are arranged into nine distinct architectural elements (channels, gravel bars, sandy bedforms, downstream and laterally accreting barforms, sand sheets, crevasse splays, levees, floodplain units and shallow lakes), which is consistent with a fluvial origin for the succession. The types of architectural elements present and their relationship to each other demonstrate that the Warchha Sandstone preserves a record of a meandering river system that drained the northern margin of Gondwanaland. The dominance of fine-grained (floodplain) facies over gravel-grade (channel-base) facies and the widespread occurrence of large-scale lateral accretion elements supports the interpretation of a high-sinuosity, meandering fluvial system in which channel bodies accumulated via the lateral accretion of point bars but in which the active channels covered only a small part of a broad floodplain at any time instant. Although the regional and temporal distribution of these deposits is complex, in broad terms the lower part is dominated by stacked, multistorey channel bodies, whereas single-storey channel elements isolated in abundant fine-grained floodplain deposits dominate the middle and upper parts of the formation.     

Recognizing the product of concave-bank sedimentary processes in fluvial meander-belt strata

Downstream migration of point bars is an important process in meander belts. Inherent to downstream migration is sediment accumulation in concave channel banks, immediately adjacent to and downstream of convex point bars. Despite this, associated concave bank processes are often overlooked, with depositional products sparsely identified in the stratigraphic record. Counter-point-bar deposits are a type of concave-bank deposit that have been positively identified in subsurface three-dimensional seismic datasets, yet outcrop examples are not well-constrained. This study characterizes and establishes recognition criteria of counter-point-bar deposits in outcrop using extensive exposure of Late-Cretaceous meander-belt deposits in eastern Alberta, Canada. Using a combination of traditional field-based sedimentological analyses and three-dimensional outcrop mapping with an Uncrewed Aerial Vehicle and Structure-from-Motion photogrammetry, point bar, counter-point bar, and associated abandoned-channel deposits, as well as adjacent floodplain deposits are identified. Bed-scale characteristics of counter-point-bar deposits include interlaminated and interbedded siltstone and fine-grained sandstone, abundant organic detritus, and evidence of deformation and slumping. At the bend scale, accretion packages bounded by internal erosion surfaces are composed of dipping siltstone and minor sandstone beds that extend from the top to the base of the meander belt. At the belt scale, positive identification relies on concave accretion surface mapping, their orientation relative to the meander-belt edge (i.e. dipping away), and consideration of meander-bend evolution. These results have implications for recognition of counter-point-bar deposits in analogous, less-constrained data sets, which provides a foundation for more complete palaeoenvironmental interpretations.     

Architecture of an Oligocene fluvial ribbon sandstone in the Ebro Basin,North‐eastern Spain

Fluvial ribbon sandstone bodies are ubiquitous in the Ebro Basin in North‐eastern Spain; their internal organization and the mechanics of deposition are as yet insufficiently known. A quarrying operation in an Oligocene fluvial ribbon sandstone body in the southern Ebro Basin allowed for a three‐dimensional reconstruction of the sedimentary architecture of the deposit. The sandstone is largely a medium‐grained to coarse‐grained, moderately sorted lithic arenite. In cross‐section, the sandstone body is 7 m thick, occupies a 5 m deep incision and wedges out laterally, forming a ‘wing’ that intercalates with horizontal floodplain deposits in the overbank region. Three architectural units were distinguished. The lowest and highest units (Units A and C) mostly consist of medium‐grained to coarse‐grained sandstone with medium‐scale trough cross‐bedding and large‐scale inclined stratasets. Each of Units A and C comprises a fining‐up stratal sequence reflecting deposition during one flood event. The middle unit (Unit B) consists of thinly bedded, fine‐grained sandstone/mudstone couplets and represents a time period when the channel was occupied by low‐discharge flows. The adjoining ‘wing’ consists of fine‐grained sandstone beds, with mudstone interlayers, correlative to strata in Units A and C in the main body of the ribbon sandstone. In plan view, the ribbon sandstone comprises an upstream bend and a downstream straight reach. In the upstream bend, large‐scale inclined stratasets up to 3 m in thickness represent four bank‐attached lateral channel bars, two in each of Units A and C. The lateral bars migrated downflow and did not develop into point bars. In the straight downstream reach, a tabular cross‐set in Unit A represents a mid‐channel transverse bar. In Unit C, a very coarse‐grained, unstratified interval is interpreted as deposited in a riffle zone, and gives way downstream to a large mid‐channel bar. The relatively simple architecture of these bars suggests that they developed as unit bars. Channel margin‐derived slump blocks cover the upper bar. The youngest deposit is fine‐grained sandstone and mudstone that accumulated immediately before avulsion and channel abandonment. Deposition of the studied sandstone body reflects transport‐limited sediment discharges, possibly attaining transient hyperconcentrated conditions.     

Facies model for a coarse‐grained,tide‐influenced delta: Gule Horn Formation (Early Jurassic), Jameson Land,Greenland

Tide‐dominated deltas have an inherently complex distribution of heterogeneities on several different scales and are less well‐understood than their wave‐dominated and river‐dominated counterparts. Depositional models of these environments are based on a small set of ancient examples and are, therefore, immature. The Early Jurassic Gule Horn Formation is particularly well‐exposed in extensive sea cliffs from which a 32 km long, 250 m high virtual outcrop model has been acquired using helicopter‐mounted light detection and ranging (LiDAR). This dataset, combined with a set of sedimentological logs, facilitates interpretation and measurement of depositional elements and tracing of stratigraphic surfaces over seismic‐scale distances. The aim of this article is to use this dataset to increase the understanding of depositional elements and lithologies in proximal, unconfined, tide‐dominated deltas from the delta plain to prodelta. Deposition occurred in a structurally controlled embayment, and immature sediments indicate proximity to the sediment source. The succession is tide dominated but contains evidence for strong fluvial influence and minor wave influence. Wave influence is more pronounced in transgressive intervals. Nine architectural elements have been identified, and their internal architecture and stratigraphical distribution has been investigated. The distal parts comprise prodelta, delta front and unconfined tidal bar deposits. The medial part is characterized by relatively narrow, amalgamated channel fills with fluid mud‐rich bases and sandier deposits upward, interpreted as distributary channels filled by tidal bars deposited near the turbidity maximum. The proximal parts of the studied system are dominated by sandy distributary channel and heterolithic tidal‐flat deposits. The sandbodies of the proximal tidal channels are several kilometres wide and wider than exposures in all cases. Parasequence boundaries are easily defined in the prodelta to delta‐front environments, but are difficult to trace into the more proximal deposits. This article illustrates the proximal to distal organization of facies in unconfined tide‐dominated deltas and shows how such environments react to relative sea‐level rise.     

Counter point bar deposits: lithofacies and reservoir significance in the meandering modern Peace River and ancient McMurray Formation, Alberta, Canada

Counter point bar deposits in the meandering Peace River, North‐central Alberta, Wood Buffalo National Park, are distinct from point bar deposits in terms of morphology, lithofacies and reservoir potential for fluids. Previously referred to as the distal‐most parts of point bars, point bar tails and concave bank‐bench deposits, counter point bar deposits have concave morphological scroll patterns rather than convex as with point bars. The Peace is a large river (bankfull discharge 11 700 m³ sec^?1, width 375 to 700 m, depth 15 m, gradient 0·00004 or 4 cm km^?1) in which counter point bar deposits are dominated by silt (80% to 90%), which contrasts with sand‐dominant (90% to 100%) point bar deposits. Beginning at the meander inflection (transition from convex to concave), counter point bar deposit stratigraphy thickens as a wedge‐like architecture in the distal direction until the deposit is nearly as thick as the point bar deposits. The low permeability silt‐dominant lithofacies in counter point bar deposits will limit reservoir extent and movement of fluids in both modern and ancient subsurface fluvial deposits. In the exploration and extraction of bitumen and heavy oil in subsurface fluvial rocks, identification and mapping of reservoir potential of point bar deposits and counter point bar deposits is now possible in the fluvial‐dominated tidal estuarine Lower Cretaceous Middle McMurray Formation, North‐east Alberta. Recent geophysical advances have facilitated imaging of some ancient buried point bar deposits and counter point bar deposits which, on the basis of morphological shape of sedimentary bodies observed from seismic amplitude, can be interpreted and mapped as depositional elements or blocks that contain associated sandstone or siltstone dominant lithofacies, respectively. As counter point bar deposits exhibit poor permeability and thus limit reservoir potential for water, natural gas, light crude, heavy oil and bitumen, counter point bar deposits should be avoided in resource developments. Geophysical imaging, interpretation and mapping of point bar deposit and counter point bar deposit elements provide new opportunities to improve recovery of bitumen and heavy oil and reduce development costs in subsurface cyclic steam stimulation and steam‐assisted gravity drainage projects by not drilling into counter point bar deposits.     

海底扇规模优质储集体的分布模式与成因分析——以上新世—更新世孟加拉扇为例

利用高品质3D地震资料搜索刻画深水水道—朵叶复合体的沉积构成并揭示油气储集体的分布模式对于深水油气勘探具有重要的指导意义。利用PaleoScan全三维智能解释手段和三色(RGB)混相分频技术识别解剖了孟加拉扇上新统—更新统深水水道—天然堤体系6种富砂沉积单元,包括补给水道、分支水道、似点坝、决口扇、漫溢扇和末端朵叶。研究认为:补给水道、决口扇、末端朵叶是潜在的规模且优质深水油气储集体类型;而漫溢扇、分支水道和似点坝分别是潜在的规模非优质、非优质非规模以及优质非规模深水油气储层类型。补给水道主要分布在水道—朵叶复合体的上游和中游;决口扇、漫溢扇、分支水道和似点坝主要发育在水道—朵叶复合体的中游;而分支水道和末端朵叶主要分布在水道—朵叶复合体的下游。漫溢扇向供源水道一侧楔状增厚,形成“砂盖泥”的格局;而决口扇向供源水道一侧楔状减薄直至尖灭形成“泥包砂”的格局,相应形成海底扇岩性圈闭。