Examining the geometry,age and genesis of buried Quaternary valley systems in the Midland Valley of Scotland,UK

Buried palaeo‐valley systems have been identified widely beneath lowland parts of the UK including eastern England, central England, south Wales and the North Sea. In the Midland Valley of Scotland palaeo‐valleys have been identified yet the age and genesis of these enigmatic features remain poorly understood. This study utilizes a digital data set of over 100 000 boreholes that penetrate the full thickness of deposits in the Midland Valley of Scotland. It identified 18 buried palaeo‐valleys, which range from 4 to 36 km in length and 24 to 162 m in depth. Geometric analysis has revealed four distinct valley morphologies, which were formed by different subglacial and subaerial processes. Some palaeo‐valleys cross‐cut each other with the deepest features aligning east–west. These east–west features align with the reconstructed ice‐flow direction under maximum conditions of the Main Late Devensian glaciation. The shallower features appear more aligned to ice‐flow direction during ice‐sheet retreat, and were therefore probably incised under more restricted ice‐sheet configurations. The bedrock lithology influences and enhances the position and depth of palaeo‐valleys in this lowland glacial terrain. Faults have juxtaposed Palaeozoic sedimentary and igneous rocks and the deepest palaeo‐valleys occur immediately down‐ice of knick‐points in the more resistant igneous bedrock. The features are regularly reused and the fills are dominated by glacial fluvial and glacial marine deposits. This suggests that the majority of infilling of the features happened during deglaciation and may be unrelated to the processes that cut them.     

Late Quaternary multiple incised valley systems: An unusually well‐preserved stratigraphic record of two interglacial valley‐fill successions from the Arno Plain (northern Tuscany,Italy)

Un‐fragmented stratigraphic records of late Quaternary multiple incised valley systems are rarely preserved in the subsurface of alluvial‐delta plains due to older valley reoccupation. The identification of a well‐preserved incised valley fill succession beneath the southern interfluve of the Last Glacial Maximum Arno palaeovalley (northern Italy) represents an exceptional opportunity to examine in detail evolutionary trends of a Mediterranean system over multiple glacial–interglacial cycles. Through sedimentological and quantitative meiofauna (benthic foraminifera and ostracods) analyses of two reference cores (80 m and 100 m long) and stratigraphic correlations, a mid‐Pleistocene palaeovalley, 5 km wide and 50 m deep, was reconstructed. Whereas valley filling is chronologically constrained to the penultimate interglacial (Marine Isotope Stage 7) by four electron spin resonance ages on bivalve shells (Cerastoderma glaucum), its incision is tentatively correlated with the Marine Isotope Stage 8 sea‐level fall. Above basal fluvial‐channel gravels, the incised valley fill is formed by a mud‐prone succession, up to 44 m thick, formed by a lower floodplain unit and an upper unit with brackish meiofauna that reflects the development of a wave‐dominated estuary. Subtle meiofauna changes towards less confined conditions record two marine flooding episodes, chronologically linked to the internal Marine Isotope Stage 7 climate‐eustatic variability. After the maximum transgressive phase, recorded by coastal sands, the interfluves were flooded around 200 ka (latest Marine Isotope Stage 7). The subsequent shift in river incision patterns, possibly driven by neotectonic activity, prevented valley reoccupation guiding the northward formation of the Last Glacial Maximum palaeovalley. The applied multivariate approach allowed the sedimentological characterization of the Marine Isotope Stage 7 and Marine Isotope Stage 1 palaeovalley fills, including shape, size and facies architecture, which revealed a consistent river‐coastal system response over two non‐consecutive glacial–interglacial cycles (Marine Isotope Stages 8 to 7 and Marine Isotope Stages 2 to 1). The recurring stacking pattern of facies documents a predominant control exerted on stratigraphy by Milankovitch and sub‐Milankovitch glacio‐eustatic oscillations across the late Quaternary period.     

Late Neogene sequence stratigraphic evolution of the Foz do Amazonas Basin,Brazil

The margin of the Foz do Amazonas Basin saw a shift from predominantly carbonate to siliciclastic sedimentation in the early late Miocene. By this time, the Amazon shelf had also been incised by a canyon that allowed direct influx of sediment to the basin floor, thus confirming that the palaeo‐Amazon fan had already initiated by that time (9.5–8.3 Ma). Above this interval, during a prolonged lowstand, Messinian third‐order sequences are preserved only in the incised‐valley fills of the canyon with no equivalent strata on the shelf. Third‐ and fourth‐order sequences younger than Messinian are preserved on the shelf after sea‐level rise above the shelf by the early Pliocene. Sequences younger than 3.8 Ma often show fourth‐order cyclicity with an average duration of 400 ka (larger scale eccentricity cycles) often preserved in high‐sedimentation‐rate areas of river deltas. Mass wasting and transportation of slope sediments to the basin began to play an important role in sediment dispersal at least as far back as the mid‐Pliocene, after rapid progradation had produced steeper slopes more prone to failure.     

Geomorphic expression of the southern Central Andes forebulge (37°S,Argentina)

We present a geomorphologic analysis of an east‐west transect located east of the southern Andes of Argentina (~37°S). We observe a succession of zones that underwent erosion and deposition during the Pleistocene. If the proximal Andean foothills are incised, a proximal depozone receives sediments feeding the megafan of the Rio Colorado on the Chadileuvú plain. More distally, the abandoned palaeo‐valleys and bending of the valley floors reflect a localized uplift. Further to the east, another depozone corresponds to the Pampa Deprimida lowland. This pattern is consistent with the presence of a classical flexural geometry of the lithosphere. The distal uplift of the foreland corresponds in terms of location, length (150 km) and amplitude (240 m) to the Andean forebulge modelled by a geophysical approach. In this study, we identify the morphological imprint of this bulge and show its effect on the fluvial activity.     

Shelf‐margin clinothem progradation,degradation and readjustment: Tanqua depocentre,Karoo Basin (South Africa)

Degradation of basin‐margin clinothems around the shelf‐edge rollover zone may lead to the generation of conduits through which gravity flows transport sediment downslope. Many studies from seismic‐reflection data sets show these features, but they lack small‐scale (centimetre to metre) sedimentary and stratigraphic observations on process interactions. Exhumed basin‐margin clinothems in the Tanqua depocentre (Karoo Basin) provide seismic‐reflection‐scale geometries and internal details of architecture with depositional dip and strike control. At the Geelhoek locality, clinothem parasequences comprise siltstone‐rich offshore deposits overlain by heterolithic prodelta facies and sandstone‐dominated deformed mouth bars. Three of these parasequences are truncated by a steep (6 to 22°), 100 m deep and 1·5 km wide asymmetrical composite erosion surface that delineates a shelf‐incised canyon. The fill, from base to top comprises: (i) thick‐bedded sandstone with intrabasinal clasts and multiple erosion surfaces; (ii) scour‐based interbedded sandstone and siltstone with tractional structures; and (iii) inverse‐graded to normal‐graded siltstone beds. An overlying 55 m thick coarsening‐upward parasequence fills the upper section of the canyon and extends across its interfluves. Younger parasequences display progressively shallower gradients during progradation and healing of the local accommodation. The incision surface resulted from initial oversteepening and high sediment supply triggering deformation and collapse at the shelf edge, enhanced by a relative sea‐level fall that did not result in subaerial exposure of the shelf edge. Previous work identified an underlying highly incised, sandstone‐rich shelf‐edge rollover zone across‐margin strike, suggesting that there was migration in the zone of shelf edge to upper‐slope incision over time. This study provides an unusual example of clinothem degradation and readjustment with three‐dimensional control in an exhumed basin‐margin succession. The work demonstrates that large‐scale erosion surfaces can develop and migrate due to a combination of factors at the shelf‐edge rollover zone and proposes additional criteria to predict clinothem incision and differential sediment bypass in consistently progradational systems.     

Geological controls on the geometry of incised‐valley fills: Insights from a global dataset of late‐Quaternary examples

Incised valleys that develop due to relative sea‐level change are common features of continental shelves and coastal plains. Assessment of the factors that control the geometry of incised‐valley fills has hitherto largely relied on conceptual, experimental or numerical models, else has been grounded on case studies of individual depositional systems. Here, a database‐driven statistical analysis of 151 late‐Quaternary incised‐valley fills has been performed, the aim being to investigate the geological controls on their geometry. Results of this analysis have been interpreted with consideration of the role of different processes in determining the geometry of incised‐valley fills through their effect on the degree and rate of river incision, and on river size and mobility. The studied incised‐valley fills developed along active margins are thicker and wider, on average, than those along passive margins, suggesting that tectonic setting exerts a control on the geometry of incised‐valley fills, probably through effects on relative sea‐level change and river behaviour, and in relation to distinct characteristics of basin physiography, water discharge and modes of sediment delivery. Valley‐fill geometry is positively correlated with the associated drainage‐basin size, confirming the dominant role of water discharge. Climate is also inferred to exert a potential control on valley‐fill dimensions, possibly through modulations of temperature, peak precipitation, vegetation and permafrost, which would in turn affect water discharge, rates of sediment supply and valley‐margin stability. Shelves with slope breaks that are currently deeper than 120 m contain incised‐valley fills that are thicker and wider, on average, than those hosted on shelves with breaks shallower than 120 m. No correlation exists between valley‐fill thickness and present‐day coastal‐prism convexity, which is measured as the difference in gradient between lower coastal plains and inner shelves. These findings challenge some concepts embedded in sequence stratigraphic thinking, and have significant implications for analysis and improved understanding of ‘source to sink’ sediment route‐ways, and for attempting predictions of the occurrence and characteristics of hydrocarbon reservoirs.     

Evolution of an incised valley system in the southern Adriatic Sea (Apulian margin): an onshore–offshore correlation

Seismic surveys with sub‐bottom profiler were carried out in the Manfredonia Gulf in the southern Adriatic Sea. Here, a buried surface was recognized on which three valleys, located about 80 km from the shelf edge, were deeply incised. Beneath this surface, a pre‐upper Würm seismic unit (PW) was identified. Above, two seismic units were recognized: the transgressive system tract (TST) and highstand system tract (g₂)_. On the basis of regional correlation with onshore and offshore data, these units and their boundaries were dated and correlated with phases of the last glacial–interglacial cycle. The incised valley system was attributed to the Marine Isotopic Stage (MIS) 2. The TST and g₂ units fill the valleys and were attributed to the post‐glacial sea‐level rise and highstand. The incised valleys are anomalous with respect to published models; despite having many characteristics that would have limited the fluvial incision (the lowstand shoreline that remained on the shelf, the low gradient of the shelf, the subsidence that affected the study area since MIS 5), the valleys appear to be deeply incised on the shelf, with valley flanks that can exceed 40 m in height. The model to explain the formation of the valleys comprises enhanced river discharge as the key factor in increasing river energy and promoting erosion across the low gradient shelf. Copyright © 2014 John Wiley & Sons, Ltd.     

Sedimentology of magmatically and structurally controlled outburst valleys along rifted volcanic margins: examples from the Nuussuaq Basin, West Greenland

ABSTRACT After a period of early Palaeocene faulting and uplift of the Nuussuaq Basin, West Greenland, two valley systems were incised into the underlying sediments. Incision of the older Tupaasat valley took place during a single drainage event of large water masses, which resulted in catastrophic deposition. The valley was cut along early Palaeocene NW‐ to SE‐trending normal faults, clearly showing that the trend and the relief of the valley were structurally controlled. The valley fill is up to 120 m thick and consists of a lower part of sandstones and conglomerates deposited from catastrophic flows characterized by very high concentrations of suspended coarse‐grained sediment load. Catastrophic deposition was followed by rapid decrease in flow discharge and the establishment of a lacustrine environment within the valley characterized by the deposition of heterolithic sediments. The younger Paatuutkløften valley system was mainly cut into the Tupaasat valley fill, which was completely or nearly completely eroded away in many places. The younger valley is 1–2 km wide and up to 190 m deep. Incision of the Paatuutkløften valley probably reflected renewed tectonic activity and uplift of the basin. This phase was shortly followed by rapid major subsidence. The valley‐fill deposits comprise a uniform succession of fluvial and estuarine sandstones. The valley fill is topped by shoreface sandstones, which are succeeded abruptly by offshore mudstones deposited shortly before and during the initial extrusion of a thick hyaloclastite succession. The Paatuutkløften valley fill is attributed to a very rapid rise in relative sea level contemporary with extensive volcanism. It is suggested that this sequence of events coincided with the arrival of the North Atlantic mantle plume. In several respects, the early Palaeocene valley‐fill deposits of the Nuussuaq Basin are different from idealized facies models for incised valley systems and represent very special cases of incised valleys. Major differences from published examples include the dominance of catastrophic deposits and indications of large changes in relative sea level of several hundreds of metres taking place rapidly in less than 1 Myr. These changes were governed by the rise of the North Atlantic mantle plume.     

Late‐glacial to Holocene depositional architecture of the Ombrone palaeovalley system (Southern Tuscany,Italy): Sea‐level,climate and local control in valley‐fill variability

The Ombrone palaeovalley was incised during the last glacial sea‐level fall and was infilled during the subsequent Late‐glacial to Holocene transgression. A detailed sedimentological and stratigraphic study of two cores along the palaeovalley axis led to reconstruction of the post‐Last Glacial Maximum valley‐fill history. Stratigraphic correlations show remarkable similarity in the Late‐glacial to early‐Holocene succession, but discrepancy in the Holocene portion of the valley fill. Above the palaeovalley floor, about 60 m below sea‐level, Late‐glacial sedimentation is recorded by an unusually thick alluvial succession dated back to ca 18 cal kyr bp . The Holocene onset was followed by the retrogradational shift from alluvial to coastal facies. In seaward core OM1, the transition from inner to outer estuarine environments marks the maximum deepening of the system. By comparison, in landward core OM2, the emplacement of estuarine conditions was interrupted by renewed continental sedimentation. Swamp to lacustrine facies, stratigraphically equivalent to the fully estuarine facies of core OM1, represent the proximal expression of the maximum flooding zone. This succession reflects location in a confined segment of the valley, just landward of the confluence with a tributary valley. It is likely that sudden sediment input from the tributary produced a topographic threshold, damming the main valley course and isolating its landward segment from the sea. The seaward portion of the Ombrone palaeovalley presents the typical estuarine backfilling succession of allogenically controlled incised valleys. In contrast, in the landward portion of the system, local dynamics completely overwhelmed the sea‐level signal, following marine ingression. This study highlights the complexity of palaeovalley systems, where local morphologies, changes in catchment areas, drainage systems and tributary valleys may produce facies patterns significantly different from the general stratigraphic organization depicted by traditional sequence‐stratigraphic models.     

Conceptual models for short‐eccentricity‐scale climate control on peat formation in a lower Palaeocene fluvial system,north‐eastern Montana (USA)

Fluvial systems in which peat formation occurs are typified by autogenic processes such as river meandering, crevasse splaying and channel avulsion. Nevertheless, autogenic processes cannot satisfactorily explain the repetitive nature and lateral continuity of many coal seams (compacted peats). The fluvial lower Palaeocene Tullock Member of the Fort Union Formation (Western Interior Williston Basin; Montana, USA ) contains lignite rank coal seams that are traceable over distances of several kilometres. This sequence is used to test the hypothesis that peat formation in the fluvial system was controlled by orbitally forced climate change interacting with autogenic processes. Major successions are documented with an average thickness of 6·8 m consisting of ca 6 m thick intervals of channel and overbank deposits overlain by ca 1 m thick coal seam units. These major coal seams locally split and merge. Time‐stratigraphic correlation, using a Cretaceous–Palaeogene boundary event horizon, several distinctive volcanic ash‐fall layers, and the C29r/C29n magnetic polarity reversal, shows consistent lateral recurrence of seven successive major successions along a 10 km wide fence panel perpendicular to east/south‐east palaeo‐flow. The stratigraphic pattern, complemented by stratigraphic age control and cyclostratigraphic tests, suggests that the major peat‐forming phases, resulting in major coal seams, were driven by 100 kyr eccentricity‐related climate cycles. Two distinct conceptual models were developed, both based on the hypothesis that the major peat‐forming phases ended when enhanced seasonal contrast, at times of minimum precession during increasing eccentricity, intensified mire degradation and flooding. In model 1, orbitally forced climate change controls the timing of peat compaction, leading to enhancement of autogenic channel avulsions. In model 2, orbitally forced climate change controls upstream sediment supply and clastic influx determining the persistence of peat‐forming conditions. At the scale of the major successions, model 2 is supported because interfingering channel sandstones do not interrupt lateral continuity of major coal seams.     

Sedimentary architecture of detached deep‐marine canyons: Examples from the East Coast Basin of New Zealand

Submarine canyons are conduits for the distribution of sediment across continental margins. Although many canyons connect directly with fluvial or marine littoral system feeders, canyons detached from direct hinterland supply are also recognized. The fill of detached canyons remains enigmatic, because their deep‐water setting restricts analysis of their evolution and stratigraphic architecture. Therefore, this study aims to investigate the sedimentary processes that infilled deep‐water canyons and the resulting architecture. Miocene outcrops of an exhumed deep‐water system from the East Coast Basin, New Zealand, are documented and compared with the morphology and seismic scale architecture of a modern detached canyon system on the same convergent margin. The outcropping system preserves the downstream margin of a sub‐basin deposited at palaeo‐water depths >700 m. A 6 km wide by 430 m deep incision is filled by heterogeneous siliciclastic sediments, 50% of which comprise graded thin‐beds with traction structures, interpreted to result from oscillatory flows. These are intercalated with concave‐up lenses, up to 15 m thick, of sigmoidally‐bedded, amalgamated sandstones, which preserve ripple casts on bed bases, interpreted as deposits at the head of a deep‐marine canyon. Palaeo‐flow was eastward, into the sub‐basin margin. On the adjacent margin of the sub‐basin down‐dip, stacked and amalgamated sandstones and conglomerates represent the fill of a submarine channel complex, at least 3 km wide. The channels are inferred to have been fed by the up‐dip canyon, which traversed the intervening structural high; similar relationships are seen in the bathymetry data. Seismic studies on this margin demonstrate that multiple phases of canyon cut and fill may occur, with downstream architectural evolution comparable to that seen at outcrop, demonstrating that detached canyons may act as sediment conduits. Breaching of developing sea‐floor structures by detached canyons can modify tortuous sediment pathways, supplying sediment to otherwise starved areas of the slope.     

Development of an incised valley‐fill at an evolving rift margin: Pleistocene eustasy and tectonics on the southern side of the Gulf of Corinth,Greece

This study from the southern margin of the Gulf of Corinth documents a Late Pleistocene incised valley‐fill succession that differs from the existing facies models, because it comprises gravelly shoal‐water and Gilbert‐type deltaic deposits, shows strong wave influence and lacks evidence of tidal activity. The valley‐fill is at least 140 m thick, formed in 50 to 100 ka between the interglacials Marine Isotope Stage 9a and Marine Isotope Stage 7c. The relative sea‐level rise left its record both inside and outside the incised valley, and the age of the valley‐fill is estimated from a U/Th date of coral‐bearing deposits directly outside the palaeovalley outlet. Tectonic up‐warping due to formation of a valley‐parallel structural relay ramp contributed to the valley segmentation and limited the landward extent of marine invasions. The valley segment upstream of the ramp crest was filled with a gravelly alluvium, whereas the downstream segment accumulated fluvio‐deltaic deposits. The consecutive deltaic systems nucleated in the ramp‐crest zone, forming a bathymetric gradient that promoted the ultimate growth of thick Gilbert‐type delta. The case study contributes to the spectrum of conceptual models for incised valley‐fill architecture. Four key models are discussed with reference to the rates of sediment supply and accommodation development, and it is pointed out that not only similarity, but also all departures of particular field cases from these end‐member models may provide valuable information on the system formative conditions. The Akrata incised valley‐fill represents conditions of high sediment supply and a rapid, but stepwise development of accommodation that resulted from the spatiotemporal evolution of normal faulting at the rift margin and overprinted glacioeustatic signals. This study adds to an understanding of valley‐fill architecture and provides new insights into the Pleistocene tectonics and palaeogeography of the Corinth Rift margin.     

Sequence stratigraphy of the upper Millstone Grit (Yeadonian,Namurian), North Wales

The upper Millstone Grit strata (Yeadonian, Namurian) of North Wales have been studied using sedimentological facies analysis and sequence stratigraphy. These strata comprise two cyclothems, each containing prodelta shales (Holywell Shale) that pass gradationally upwards into delta‐front and delta‐plain deposits (Gwespyr Sandstone Formation). The deltas formed in shallow water (<100 m), were fluvial‐dominated, had elongate and/or sheet geometries and are assigned to highstand systems tracts. Two delta complexes with distinctive sandstone petrographies are identified: (1) a southerly derived, quartzose delta complex sourced locally from the Wales‐Brabant Massif, and (2) a feldspathic delta complex fed by a regional source(s) to the north and/or west. The feldspathic delta complex extended further south in the younger cyclothem. A multistorey braided‐fluvial complex (Aqueduct Grit, c. 25 m thick) is assigned to a lowstand systems tract, and occupies an incised valley that was eroded into the highstand feldspathic delta complex in the younger cyclothem. A candidate incised valley cut into the highstand feldspathic delta complex in the older cyclothem is also tentatively identified. Transgressive systems tracts are thin (<5 m) and contain condensed fossiliferous shales (marine bands). The high‐resolution sequence stratigraphic framework interpreted for North Wales can be readily traced northwards into the Central Province Basin (‘Pennine Basin’), supporting the notion that high‐frequency, high‐magnitude sea‐level changes were the dominant control on stratigraphic architecture. Copyright © 2007 John Wiley & Sons, Ltd.     

Deep incision in an Aptian carbonate succession indicates major sea‐level fall in the Cretaceous

Long‐term relative sea‐level cycles (0·5 to 6 Myr) have yet to be fully understood for the Cretaceous. During the Aptian, in the northern Maestrat Basin (Eastern Iberian Peninsula), fault‐controlled subsidence created depositional space, but eustasy governed changes in depositional trends. Relative sea‐level history was reconstructed by sequence stratigraphic analysis. Two forced regressive stages of relative sea‐level were recognized within three depositional sequences. The first stage is late Early Aptian age (intra Dufrenoyia furcata Zone) and is characterized by foreshore to upper shoreface sedimentary wedges, which occur detached from a highstand carbonate platform, and were deposited above basin marls. The amplitude of relative sea‐level drop was in the order of tens of metres, with a duration of <1 Myr. The second stage of relative sea‐level fall occurred within the Late Aptian and is recorded by an incised valley that, when restored to its pre‐contractional attitude, was >2 km wide and cut ≥115 m down into the underlying Aptian succession. With the subsequent transgression, the incision was backfilled with peritidal to shallow subtidal deposits. The changes in depositional trends, lithofacies evolution and geometric relation of the stratigraphic units characterized are similar to those observed in coeval rocks within the Maestrat Basin, as well as in other correlative basins elsewhere. The pace and magnitude of the two relative sea‐level drops identified fall within the glacio‐eustatic domain. In the Maestrat Basin, terrestrial palynological studies provide evidence that the late Early and Late Aptian climate was cooler than the earliest part of the Early Aptian and the Albian Stage, which were characterized by warmer environmental conditions. The outcrops documented here are significant because they preserve the results of Aptian long‐term sea‐level trends that are often only recognizable on larger scales (i.e. seismic), such as for the Arabian Plate.     

Controls on large‐scale patterns of fluvial sandbody distribution in alluvial to coastal plain strata: Upper Cretaceous Blackhawk Formation,Wasatch Plateau,Central Utah,USA

Current models of alluvial to coastal plain stratigraphy are concept‐driven and focus on relative sea‐level as an allogenic control. These models are tested herein using data from a large (ca 100 km long and 300 m thick), continuous outcrop belt (Upper Cretaceous Blackhawk Formation, central Utah, USA). Many channelized fluvial sandbodies in the Blackhawk Formation have a multilateral and multistorey internal character, and they generally increase in size and abundance (from ca 10% to ca 30% of the strata) from base to top of the formation. These regional, low‐resolution trends exhibit much local variation, but are interpreted to reflect progressively decreasing tectonic subsidence in the upper Blackhawk Formation and overlying Castlegate Sandstone. The trend may also incorporate progressively more frequent channel avulsion during deposition of the lower Blackhawk Formation. Laterally extensive coal zones formed on the coastal plain during shallow‐marine transgressions, and define the high‐resolution stratigraphic framework of the lower Blackhawk Formation. Large (up to 25 m thick and 1 to 6 km wide), multistorey, multilateral, fluvial channel‐complex sandbodies that overlie composite erosion surfaces occur at distinct stratigraphic levels, and are interpreted as fluvial incised valley fills. Low amplitude (<30 m) relative sea‐level variations are interpreted as the dominant control on stratigraphic architecture in the lower Blackhawk Formation, which was deposited up to 50 km inland from the coeval shoreline. In contrast, the high‐resolution stratigraphy of the upper Blackhawk Formation is poorly defined, and channelized fluvial sandbodies are poorly organized. Vertical and laterally offset stacking of a small proportion (<10%) of sandbodies produced ‘clusters’ that are not confined by ‘master’ erosion surfaces. Avulsion is interpreted to dominate the stratigraphic architecture of the upper Blackhawk Formation. This data‐driven analysis indicates that alluvial to coastal plain stratigraphic architecture reflects a combination of various allogenic controls and autogenic behaviours. The relative sea‐level control emphasized in sequence stratigraphic models is only rarely dominant.     

The palaeo‐valley infilling glaciogenic Sarah Formation,an example from Rahal Dhab palaeo‐valley,Saudi Arabia

The Sarah Formation is a glaciogenic sedimentary unit deposited along the Gondwana margin during the latest Ordovician ice age and represents a major hydrocarbon reservoir in northern Saudi Arabia. Large‐scale glacial palaeo‐valleys cut into the Qasim Formation and were infilled by the Sarah Formation. Post‐glacial transgression in the earliest Silurian resulted in the deposition of the Qusaiba Shale Member and associated organic‐rich basal source rocks, which cap the Sarah Formation infilled palaeo‐valleys. This unique setting makes the Sarah Formation an important emerging exploration target in Saudi Arabia. This study focuses on the facies and depositional architecture in seismic‐scale outcrops of the Sarah Formation in north‐western Saudi Arabia. The Rahal Dhab palaeo‐valley provides a 100 km long dip‐oriented cross‐section which has been covered by 24 vertical sections, sedimentary architectural analyses at metre to kilometre scale and by three cored shallow boreholes. In the Rahal Dhab palaeo‐valley, the Sarah Formation was deposited in a proglacial setting that ranged from marginal marine to offshore prodelta and is made up of three units: (i) the Sarah Sandstone; (ii) the Sarah Shale; and (iii) the Uqlah Member. This study shows the relationships between these three units and architectural controls on reservoir quality in this system. This paper contributes to the regional understanding of the Sarah Formation, and the new depositional model of the Rahal Dhab palaeo‐valley provides an outcrop‐reservoir analogue for hydrocarbon exploration in adjacent areas.     

The incised valley of Baffin Bay,Texas: a tale of two climates

Baffin Bay, Texas is the flooded Last Glacial Maximum incised valley of the Los Olmos, San Fernando and Petronila Creeks along the north‐western Gulf of Mexico. Cores up to 17 m in length and high‐resolution seismic profiles were used to study the history of Baffin Bay over the last 10 kyr and to document the unusual depositional environments within the valley fill. The deposits of the Baffin Bay incised valley record two major and two minor events. Around 8·0 ka, the estuarine environments backstepped more than 15 km in response to an increase in the rate of sea‐level rise. Around 5·5 ka, these estuarine environments changed from environments similar to other estuaries of the northern Gulf of Mexico to the unusual suite of environments found today. Another minor flooding event occurred around 4·8 ka in which several internal spits were flooded. Some time after 4·0 ka, the upper‐bay mud‐flats experienced a progradational event. Because of its semi‐arid climate and isolation from the Gulf of Mexico, five depositional environments not found in the other incised‐valley fills of the northern Gulf of Mexico are found today within Baffin Bay. These deposits include well‐laminated carbonate and siliciclastic open‐bay muds, ooid beaches, shelly internal spits and barrier islands, serpulid worm‐tube reefs and prograding upper‐bay mud‐flats. Based on these unusual deposits, and other characteristics of Baffin Bay, five criteria are suggested to help identify incised valleys that filled in arid and semi‐arid climates. These criteria include the presence of: (i) hypersaline‐tolerant fauna; (ii) aeolian deposits; and (iii) carbonate and/or evaporite deposits; and the absence of: (iv) peat or other organic‐rich deposits in the upper bay and bay‐margin areas; and (v) well‐developed fluvially dominated bayhead deltas.     

Interplay between an axial channel belt,slope gullies and overbank deposition in the Puchkirchen Formation in the Molasse Basin,Austria

Deep‐water sediments in the Molasse Basin, Austria, were deposited in a narrow foreland basin dominated by a large channel belt located between the steep Alpine fold and thrust belt to the south and the gentler northern slope off the Bohemian Massif. Several gas fields occur outside the channel belt, along the outer bend of a large meander. Accumulation of these overbank sediments reflects a complicated interplay between slope accommodation and debris‐flow and turbidity‐flow interaction within the channel. The tectonically oversteepened northern slope of the basin (ca 2 to 3°) developed a regionally important erosional surface, the Northern Slope Unconformity, which can be traced seismically for >100 km in an east–west direction and >20 km from the channel to the north. The slope preserves numerous gullies sourced from the north that eroded into the channel belt. These gullies were ca 20 km long, <1 km wide and ca 200 m deep. As the channel aggraded, largely inactive and empty gullies served as entry points into the overbank area for turbidity currents within the axial channel. Subsequently, debris‐flow mounds, 7 km wide and >15 km long, plugged and forced the main channel to step abruptly ca 7 km to the south. This resulted in development of an abrupt turn in the channel pathway that propagated to the east and probably played a role in forming a sinuous channel later. As debris‐flow topography was healed, flows spread out onto narrow area between the main channel and northern slope forming a broad fine‐grained apron that serves as the main gas reservoir in this area. This model of the overbank splay formation and the resulting stratigraphic architecture within the confined basin could be applied in modern and ancient systems or for subsurface hydrocarbon reservoirs where three‐dimensional seismic‐reflection data is limited. This study elucidates the geomorphology of the oversteepened slope of the under‐riding plate and its effects on the sedimentation.