双层滑脱构造的物理模拟：对准噶尔盆地南缘褶皱冲断带的启示

为了研究双层滑脱构造变形的主控因素,设计了3类砂箱模型,对滑脱层材料、滑脱层厚度、滑脱层黏度、上覆砂层厚度、受力边界条件等主控因素进行物理模拟试验研究。试验结果表明：不同滑脱层材料产生的变形样式不同。以微玻璃珠组成的滑脱层主要产生前展型逆冲叠瓦式断裂构造,下部滑脱层起主控滑脱作用,上部滑脱层厚度、滑脱层之上砂层厚度越大越容易形成滑脱断层;挤压方向与受力边界间的夹角较大时,上部滑脱层容易先形成滑脱断层,其推覆体前缘水平位移较快。以不同黏度硅胶组成的滑脱层产生不同的分层滑脱构造变形样式,当下部滑脱层硅胶黏度为500～1 000Pa.s时,形成分层滑脱前展型叠瓦式构造;当硅胶黏度为2 000～2 500Pa.s时,靠近挤压端先形成背冲构造,然后在上部滑脱层形成叠瓦式构造,在下部滑脱层形成对冲三角带构造、冲起背斜构造。地震和钻井资料显示,准噶尔盆地南缘西段霍尔果斯—安集海褶皱冲断带具有双层滑脱变形特征;模拟结果认为,斜向受力边界、侏罗纪煤层以及古近纪泥岩层的分层滑脱作用是控制变形过程的主要因素。     

滇西兰坪盆地金顶铅锌矿盐构造发育特征及其与成矿关系

滇西兰坪中新生代盆地广泛发育盐岩层系。通过对金顶超大型铅锌矿区的露天采厂和地下采坑的最新野外调查及大量钻孔资料的综合分析,研究区盐岩层系具有多期、多阶段运动的特点,厚度分布极不均一,它们作为区域推覆构造作用的滑脱层,对盐上层构造变形起着重要控制作用,形成一系列储矿构造。研究表明,矿区盐构造主要包括盐枕、盐背斜、盐焊接、盐穿刺、盐推覆、盐岩滑脱-断层相关褶皱组合等多种盐构造变形样式。这些盐构造的形成演化及变形机制主要受到推覆挤压缩短作用、基底断层作用和塑性流动汇聚作用、盐下和盐上层断裂滑脱作用等控制,主要沿推覆断裂构造带呈串珠状分布。金项矿区盐构造分为两个阶段:古新世–始新世挤压–拗陷层内变形阶段,形成盐枕、隆升较低的盐背斜等整合型盐构造;渐新世的逆冲推覆–盐岩滑脱阶段,受强烈的挤压推覆作用而形成盐墙、盐株等盐穿刺型构造。盐构造不同阶段的变形演化对金属元素富集成矿起到关键作用,其流动变形而形成的盐构造圈闭促使了金属聚集成矿。     

Evolution of thrust system deformation in an intracratonic chain: Study of the Southern-Central Tunisian Atlas

The development of belt structures in intracratonic chains is guided by the convergence system. In the Southern-Central Tunisian Atlas, several parameters control the evolution of thrust folds during different tectonic phases. One of these phases is tectonic inheritance, which leads to the reactivation of pre-existing normal faults during compressive phases. The angle between the direction of these faults and the shortening axis (NNW-SSE) is the most important parameter for interpreting the mode of the evolution of thrust folds. Jebel Elkebar is an example of a structure developed on NW-SE-oriented faults that is perpendicular to the shortening axis. Based on the geometry of its folds, Jebel Elkebar is interpreted as a 'Fault Related Fold'. The E-W-oriented Orbata structure is oblique to the direction of the shortening axis and is interpreted through the model 'Fault Propagation Fold' with 'Breakthrough'. The Gafsa Fault, which is parallel to the shortening axis, is a transpressional fault interpreted through the 'Strain Partitioning' mode, which is associated with the oblique ramp fold. The development of various thrust folds requires the presence of a basal decollement level during the Triassic succession. In the Southern-Central Tunisian Atlas, the deformation is variable (geometry of fold closure) and is correlated with the depth of the decollement level; indeed, the intensity of deformation is proportional to the depth of the decollement level. Consequently, the most important deformation is in the higher successions and is a vertical migration of the decollement level associated with thin-skinned deformation.     

塔里木盆地西南坳陷周缘的滑脱构造

西南坳陷主要发育两套滑脱层序,一套是中寒武统和田河组膏盐岩,另一套是古近系底部阿尔塔什组和齐姆根组的夹灰岩、白云岩的膏泥岩;前者厚度500 m左右,后者厚度在100 ～700 m左右.和田河组膏盐岩主要影响中生代及中新世末的构造变形,古近系底部的膏泥岩主要影响上新世末及第四纪的构造变形,构造变形样式均以顺层滑脱构造为主...     

Kinematic evolution of thrusts wedge and erratic line length balancing: insights from deformed sandbox models

Kinematic evolution of fold-thrust structures has been investigated by analogue models that include syntectonic sedimentation. Different decollement dips and basement thicknesses produced different wedge geometries and propagating characteristics. A model with one decollement level was characterized by a closely spaced thrust system during early stages of shortening as compared to the late stages. The frequency of fault nucleation was rapid during the early stages of deformation. Conversely, the frequency of fault nucleation was low and thrust spacing was significantly wider in a model with two decollement levels. Individual faults became locked at steep dips and deformation stepped forward as a new fault nucleated in-sequence in front of the older locked structure. Once the thrust system was established up to 27 % overall shortening, an overlying bed was introduced to simulate syntectonic deformation. Model sand wedge did not grow self similarly but rather its length and height increased episodically with deformation. Restoration of deformed models show that layer parallel shortening accommodated for approximately half of the total model shortening across the multilayers. Calculated error in apparent layer shortening from the restored layers revealed a direct relation with depth of the layers in the models. The experimental results are comparable to a natural example from the Northern Apennines fold-and-thrust belts.     

湘东太湖逆冲推覆构造基本特征研究

通过地表地质调查和钻探资料,厘定了湘东太湖逆冲推覆构造.推覆构造总体呈北东走向,自北西往南东依次由前缘逆断裂(螺丝桥断裂)、推覆体前带和上部滑脱构造、下断坡(铁铺坳-龙凤桥隐伏断裂)及推覆体后带、反冲断裂(中湾断裂)、后缘向斜等组成.在前缘断裂北西面发育青洞倒转向斜.后缘向斜呈向NW凸出的弧形,其中段发育丫江桥穹状隆起和印支期丫江桥花岗岩体.青洞向斜走向中分点、后缘向斜弧形前凸部位及丫江桥岩体(穹状隆起)中心组成NW向直线,并与丫江桥岩体长轴重合.基于以上特征,分析提出太湖逆冲推覆构造及丫江桥穹状隆起和丫江桥岩体形成的动力机制:印支运动中在区域NW(W)向挤压下,发生深部和浅部滑脱以及沿下断坡的逆冲,形成太湖逆冲推覆构造.太湖推覆体向北西运动过程中存在自青洞向斜至丫江桥岩体的具有更强的挤压和更大距离滑移的中轴带,使丫江桥地区形成穹状隆起,并使后缘向斜轴迹因后拽牵引而组成-向北西凸出的弧形构造.丫江桥穹状隆起区由于更强的挤压剪切作用及更大幅度的地壳增厚,深部地壳发生更大幅度的升温,在强挤压过后应力松弛环境下减压熔融、岩浆上侵而形成丫江桥花岗岩体.太湖逆冲推覆构造为华南中生代构造演化提供了一定程度的制约.     

宣东二号煤矿滑脱构造特征及其形成机制探讨

据钻探资料分析,宣东二号煤矿发育有以F2为主滑脱面的滑覆型滑脱构造,滑脱面主要发育在下花园组煤系中,上覆系统包括Ⅲ3煤层及其以上地层,而Ⅳ1煤层及其以下地层则构成下伏系统。区内滑脱构造属于鸡鸣山—黄羊山推覆构造伴生的次一级构造,它的发育使部分压应力得到释放,从而使煤层避免了类似下花园附近的强烈褶皱和断裂。发育于Ⅲ3等煤层内部的滑脱构造,导致了煤变质程度的提高和物理力学性质的改变。     

扎格罗斯褶皱冲断带构造变形特征

扎格罗斯褶皱冲断带是扎格罗斯碰撞造山带的前陆褶皱冲断带,也是波斯湾周缘前陆盆地的楔顶带,自北东到南西垂直于构造线方向可分为高扎格罗斯冲断带和扎格罗斯简单褶皱带;自北西到南东沿构造线方向可分为洛雷斯坦区(Lorestan)、迪兹富勒湾区(Dezful Embayment)和法尔斯区(Fars)。扎格罗斯褶皱冲断带的形成始于晚白垩世阿拉伯板块的洋壳向北俯冲到欧亚板块之下,褶皱冲断构造从北东部缝合带向南西方向伸展,并在上新世基本定型。本文选取了横切扎格罗斯褶皱冲断带的3条地质剖面和两条局部地震剖面进行构造变形分析。剖面分析显示研究区垂向上由一条大滑脱面将扎格罗斯褶皱冲断带剖面分为上、下两个构造层;褶皱冲断变形从北东到南西向由强变弱。研究区发育走滑、挤压和拉张3种构造变形,挤压构造变形占主导地位。挤压构造变形又包括滑脱褶皱、断展褶皱、断弯褶皱和双重构造等。     

柯坪褶皱冲断带构造变形特征解析

柯坪褶皱冲断带位于塔里木盆地西北缘,勘探程度低,地表、地下构造变形复杂,构造模型存在多解性.本文通过对最新地震资料的解释,结合地质露头和钻井资料,建立起该地区新的构造模型.柯坪褶皱冲断带构造变形具有东西分段、南北分带的特征.东西向具有“跷跷板式”的沉积特征.中部皮羌段中寒武统盐层厚度大,主要发育盐下冲断构造和盐上反向滑脱构造;东、西两段主要发育基底卷入构造.石炭纪柯坪褶皱冲断带存在一期古隆起构造.晚石炭世一早二叠世沉积的康克林组具有填平补齐的特征.皮羌段发育两期断裂.早期为海西期断裂,晚期为喜山期断裂.石炭纪古隆起受控于早期断裂.喜山期形成的盐上滑脱构造对下伏潜在的古油藏具有封闭和保存作用.     

黔东南地区褶皱构造样式及其断层突破模式

黔东南地区发育隔槽式褶皱组合和逆冲断层.通过对褶皱和地层的平面展布、断层的产状和性质以及滑脱层的分析, 结合典型地震剖面解释和平衡剖面恢复, 对黔东南地区构造特征及其成因进行了探讨.结果表明, 隔槽式褶皱的发育不仅与滑脱深度和剥蚀差异有关, 而且与逆冲断层的推覆距离、逆冲断层的产状、断坪断坡长度比、断层突破方式和多层次滑脱等方面存在着密切联系.结合区域构造演化和推覆距离的制约, 建立了黔东南地区的隔槽式褶皱构造样式的几何学和运动学模型, 确定其主要影响因素是断坪断坡长度比较小、多种方式断层突破和多层次滑脱.      

湖南桑植-石门复向斜走廊剖面构造特征分析

为了查明桑植—石门复向斜的地表、地下构造特征及其相互间的关系,采取了详细的地表走廊剖面的测量,以及结合地震勘探资料和大地电磁测深(MT)资料的综合解释。桑植—石门复向斜可进一步划分为四个次一级的构造带,从北向南依此是:堰塘湾构造带、四望山构造带、江垭构造带及教子垭构造带。江垭构造带和教子垭构造带的地面构造特征与地下构造特征具有一致性,基本上为构造简单的北倾斜坡;而四望山构造带的地面构造特征与地下构造特征存在着明显的不协调性。这种变形特征可解释为沿盖层间滑脱面的逆冲,以及断弯背斜的形成,上覆构造层中的褶皱向下消失在滑脱面上,形成所谓的“无根褶皱”。     

豫西马超营断裂带的构造演化及其与金等成矿的关系

马超营断裂带是豫西华北地台南缘一条重要的控矿构造带 ,具有复杂的构造演化史 ,至少发生过 5个旋回、7个世代的构造事件。其中海西—印支期的伸展滑脱构造体制和燕山期的逆冲推覆构造体制 ,对该构造带的发展演化和金、多金属成矿起着重要的作用。     

歧口凹陷滑脱构造剖析及对油气地质意义

重力滑脱构造在盆地演化中较为常见,地层或岩体在重力作用下向下方滑动所产生的构造变动存在广泛。歧口凹陷为渤海湾新生代盆地内一个次级构造单元凹陷,其特点是新生代沉积巨厚且构造活动强烈,为重力滑脱和相关构造形成提供了发育条件。按照滑脱面性质的不同,将歧口凹陷的滑脱构造分为3类:地层-断裂复合滑脱、顺层滑脱和断裂滑脱。在该凹陷中选其各自具代表性的构造,如埕北滑脱构造、塘沽新港滑脱构造和大张坨滑脱构造进行结构特征和演化等方面剖析。研究认为,歧口凹陷滑脱构造形成的主控因素为新生代凹陷区快速沉积、凸起带强烈隆升、前第三纪地层的滑移层和热力作用。滑脱构造大多有褶皱和断裂相伴生,其组合方式不同可为油气成藏提供有利条件。     

银厂坡铅锌银矿床地质构造特征及找矿分析

从矿床构造格架、构造组合特征、构造几何特征、力学及运动学特征、构造控矿规律等方面进行剖析，认为不同序次的构造起到不同级别的控矿作用：三大区域性的深大断裂（小江、弥勒师宗、紫云垭都）围成了Pb-Zn-Ag-Au成矿域，次一级的石门断裂则为控制铅锌银成矿带的构造，而其在局部的逆冲断裂及其配套的逆冲推覆叠瓦构造组合（如矿山厂、麒麟厂、银厂坡逆冲断裂）则控制了银铅锌矿床的产出，更低序次的层间滑脱构造、陡倾裂隙及地层岩性、节理则为控制矿体的构造。并通过低序次构造的测量，直接预测盲矿体的产状形态，结合其他找矿手段，为本矿床的找矿提供依据。     

Control of syntectonic erosion and sedimentation on kinematic evolution of a multidecollement fold and thrust zone: Analogue modeling of folding in the southern subandean of Bolivia

Several analogue modeling studies have been conducted during the past fifteen years with the aim to discuss the effects of sedimentation and erosion on Foreland Fold and Thrust Belt, among which a few have analyzed these processes at kilometric scale (Malavieille et al., 1993; Nalpas et al., 1999; Barrier et al., 2002; Pichot and Nalpas, 2009). The influence of syn-deformation sedimentation and erosion on the structural evolution of FFTB has been clearly demonstrated. Here, we propose to go further in this approach by the study of a more complex system with a double decollement level. The natural study case is the Bolivian sub-Andean thrust and fold belt, which present all the required criteria, such as the double decollement level. A set of analogue models performed under a CT-scan have been used to test the influence of several parameters on a fold and thrust belt system, among which: (i) the spatial variation of the sediment input, (ii) the spatial variation of the erosion rate, (iii) the relative distribution of sedimentation between foreland and hinterland. These experiments led to the following observations:

• 1. The upper decollement level acts as a decoupling level in case of increased sedimentation rate: it results in the verticalization of the shallower part (above the upper decollement level), while the deeper parts are not impacted.
• 2. Similarly, the increase of the erosion rate involves the uplift of the deeper part (below the upper decollement level), whereas the shallower parts are not impacted.
• 3. A high sedimentation rate in the foreland involves a fault and fold vergence reversal, followed by a back-thrusting of the shallower part.
• 4. A high sedimentation rate in the hinterland favours thrust development toward the foreland in the shallower parts.

     

鄂尔多斯盆地西缘横山堡地区构造特征与油气勘探目标优选

鄂尔多斯盆地西缘北区横山堡地区是重要的油气接替区域。本文利用构造解析、地震勘探等技术方法,对研究区构造特征与油气勘探目标进行了研究。结果表明,晚侏罗纪末期,研究区为银川复背斜东翼,喜山期构造调整后转为前缘反冲带,由一系列西冲东倾逆冲断层与断背斜组成;该区可分为西部逆冲断褶带、中部逆冲断阶带和东部过渡构造带3个构造单元。断层可分为4级;以燕山期近南北—北北东向逆断层为主,其次为喜山期近东西向走滑断层,并错断了燕山期逆断层。构造样式为一系列东倾单向叠瓦状冲断组合,由近南北向逆断层及加持于其中的断块组成,断块往往为一些小型断背斜,其轴迹走向以近南北—北北东向为主。地质结构为深层滑脱型单向东倾冲断构造。根据上述研究,在沙亥庙断裂上盘断背斜构造高部位优选出一个钻探目标。     

天山南麓库车晚新生代褶皱-冲断带

库车褶皱冲断带位于天山南麓,由近东西走向的多条构造带组成。三叠系暗色泥岩、侏罗系煤层、古近系库姆格列木组膏盐层和新近系吉迪克组膏盐层构成库车褶皱冲断带的区域性主滑脱面。褶皱冲断带底面由北向南逐渐抬高。褶皱冲断带主体发育盖层滑脱-冲断构造(薄皮构造),基底卷入型冲断构造(厚皮构造)见于北缘的根带。新生界膏盐层之上构造变形以滑脱褶皱为特色,之下以冲断构造为特色。库车褶皱冲断带是印度-亚洲碰撞远程效应下,(南)天山晚新生代造山过程的产物。褶皱冲断带构造变形的动力来源主要是造山楔向塔里木盆地推进所形成的挤压构造应力。褶皱冲断带构造变形的起始时间为约23Ma,构造变形具有阶段式加速的特点,已经识别出约23Ma、约10Ma、5~2Ma和1~0Ma共4个变形加速期。褶皱冲断带的演化过程为前展式,褶皱冲断带前锋向南推进的同时,后缘持续变形。     

塔里木盆地巴楚隆起北缘阿恰基底卷入构造

塔里木盆地巴楚隆起为第四系不整合覆盖的古隆起,在其西北缘发育NW走向的阿恰断裂、萨拉姆布拉克背斜、向斜和隐伏的乔来麦提断裂。地震剖面和钻井资料显示,阿恰断裂为倾向南的基底卷入逆冲断裂,向北逆冲,错断层位从前寒武系基底一直到中寒武统膏岩,从西向东逆冲断距减少。乔来麦提断裂则以中寒武统膏岩为滑动面,向南逆冲,并在断层端部发育萨拉姆布拉克断层扩展褶皱。这两种类型构造样式的断裂(基底卷入断裂和盖层滑脱断裂),在剖面上组成典型的楔形构造几何形态,平面上形成三角形构造。遥感影像解译指出阿恰断裂和萨拉姆布拉克向斜向北西方向延伸进入柯坪逆冲带,并在该带有相应方向的地表构造显现,与北东走向的柯坪逆冲带组成叠加构造。生长地层分析确定基底卷入构造形成于始新世—中新世,而柯坪逆冲带形成于第四纪,明显晚于巴楚隆起形成时代。     

塔里木西北缘北西向古隆起的存在及油气勘探前景

塔里木西北缘柯坪逆冲带为天山和塔里木盆地在中新生代盆山耦合过程中形成，为印度板块和欧亚板块碰撞影响最显的地区之一．柯坪地区存在两种方向的构造，即NE向逆冲推覆构造和NW向的走滑构造及潜伏构造．在NE逆冲带的走向上，推覆构造变形样式从南向北，以寒武纪蒸发岩作为主要的滑动拆离面——薄皮逆冲，到北部地区卷入元古界结晶基底的逆冲推覆构造．根据变形时代分析，NW向构造为长期发育的巴楚隆起，形成时代为中生代早期，近NE向的柯坪逆冲构造形成于新生代，同时也形成NW向的走滑构造．早期形成的巴楚隆起构造南北两侧发育的阿瓦提盆地和塔里木盆地西南为生油区，巴楚隆起为油气运移指向区．     

Mise en évidence d'un nouveau front de chevauchement dans l'Atlas tunisien oriental de Tunisie par sismique réflexion. Contexte structural régional et rôle du Trias salifère

Structural interpretations of newly acquired seismic lines in northeastern Tunisia allow us to highlight a new thrust front for the Atlasic range of Tunisia, in contrast to the previously Zaghouan fault thrust Dorsale zone. This new thrust front takes place on weakness tectonic zones, materialized by inherited faults anchored on the pre-Triassic basement. This front seems to be a paleogeographic trend controlling structural style and basin fill with a synsedimentary activity. The front is expressed by reverse faults, thrust faults, back thrusting, and decollement structures. To cite this article: S. Khomsi et al., C. R. Geoscience 336 (2004).