Amalgamation surfaces, bed thicknesses, and dish structures in sand-rich submarine fans: numeric differences in channelized and unchannelized deposits and their diagnostic value

Hydraulic differences between channelized and unchannelized flows in sand-rich submarine fans result in different distributions of amalgamation surfaces, bed thicknesses, and dish structures in successions of these two different environments. Distribution trends of these fabrics were quantified for the sand-rich fans of the Reiselsberger Sandstein (Cenomanian–Turonian). These trends can be used as criteria to distinguish channelized from unchannelized paleoenvironments of sand-rich submarine fans.

Amalgamation surfaces in the studied fans' channelized regions are considerably more abundant than in the unchannelized fan areas. In unchannelized deposits, tabular amalgamation surfaces outnumber nontabular ones, whereas the opposite occurs in channelized successions. These results indicate a higher degree of erosive power of gravity-driven sediment flows in channels as a result of a greater flow thickness, higher flow velocity, and turbulence.

The average turbidite layer thickness in channelized successions is markedly greater than in unchannelized deposits (“layer” as defined herein). This is mainly attributed to the combined effects of differences in sediment fall-out rate and the inefficiency of sand-rich suspensions to transport sand. In the proximal and channelized fan areas, more sediment is deposited from a flow in the form of a layer than in distal unchannelized fan regions despite a higher degree of erosion in channels. The greater average bed thickness in channel fills is a function of layer thickness and more frequent amalgamations (“bed” as defined herein).

Dish structures seem to be considerably more common in midfan than in outer-fan successions. This may indicate a higher sedimentation rate from individual suspension currents in midfan areas.     

Unincised fluvial and tide-dominated estuarine systems from the Mesoproterozoic Lower Tombador Formation,Chapada Diamantina basin,Brazil

The Mesoproterozoic Lower Tombador Formation is formed of shallow braided fluvial, unconfined to poorly-channelized ephemeral sheetfloods, sand-rich floodplain, tide-dominated estuarine, and shallow marine sediments. Lowstand braided fluvial deposits are characterized by a high degree of channel amalgamation interbedded with ephemeral, intermediate sheetflood sandstones. Sand-rich floodplain sediments consist of intervals formed by distal sheetflood deposits interbedded with thin layers of eolian sandstones. Tide-dominated estuarine successions are formed of tide-influenced sand-bed braided fluvial, tidal channel, tidal sand flat and tidal bars. Shallow marine intervals are composed of heterolithic strata and tidal sand bars. Seismic scale cliffs photomosaics calibrated with vertical sections indicate high lateral continuity of sheet-like depositional geometry for fluvial–estuarine successions. These geometric characteristics associated with no evidence of incised-valley features nor significant fluvial scouring suggest that the Lower Tombador Formation registers deposition of unincised fluvial and tide-dominated systems. Such a scenario is a natural response of the interplay between sedimentation and fluctuations of relative sea level on the gentle margins of a sag basin. This case study indicates that fluvial–estuarine successions exhibit the same facies distributions, irrespective of being related to unincised or incised-valley systems. Moreover, this case study can serve as a starting point to better understand the patterns of sedimentation for Precambrian basins formed in similar tectonic settings.     

Subaerial terminoglacial fans II: a semi-quantitative sedimentological analysis of the middle and distal environments

Twenty-five fans in NE Poland, formed under subaerial terminoglacial (previously called ice-contact) conditions, were investigated to model the dominant genetic processes involved. These fans show, as do other types, a proximal, a middle and a distal subenvironment. It is found, however, that the characteristics of these subenvironments as present in subaerial terminoglacial fans differ in several respects from those in fans formed under other climatic conditions. The present study deals with the middle and distal subenvironments. These appear to be much less complex than the proximal subenvironment in this type of fan. The middle terminoglacial fan comprises two sandy facies, characterized by unchannelized transport (mainly sheet floods) and stream flows. The distal terminoglacial fan is characterized by one (sandy/silty) facies, resulting from unchannelized currents and from settling in ephemeral ponds; braided streams play a secondary part in this fan subenvironment. The characteristics of the middle and distal fan subenvironments are described and illustrated, as is the facies from the distal subenvironment. Their vertical and lateral relationships are presented in a facies model.     

Facies Clustering in Turbidite Successions: Case Study from Andaman Flysch Group, Andaman Islands, India

Bed thickness data of two turbidite sections viz., Corbyn's Cove section, South Andaman and Kalipur section, North Andaman those belong to Oligocene Andaman Flysch Group, a forearc submarine fan system, were assessed for facies clustering employing Hurst statistics. Both the sections show Hurst phenomenon and reveal clustering in terms of thick and thin beds. Forcing behind event (bed) depositions in either of the studied sections was assessed statistically and inferred to be non-random and with cyclicities of irregular physical length. The inferred paleogeography through Hurst criteria though worked well for distal fan setting i.e., basin floor sheet sandstones of Corbyn's Cove section, its unequivocal application in proximal fan deposits remains to be tested. The mismatch in paleogeographic interpretation between Hurst test result (lobe-interlobe) and field observation (channel-levee) for the inner fan deposit is explained through differential facies stacking between fans grow in sea-level lowstand and highstand. Lower bed amalgamation, poor sand to mud ratio and subordinately present thick event deposits may be the result of active growth of Andaman Flysch fan in sea level highstand and expressed in lower Hurst K value for inner fan channel-levee association (Kalipur section) compared to many of the channel-levee deposits of lowstand fan systems observed world over.     

Stream-dominated alluvial fan and lacustrine depositional systems in Cenozoic strike-slip basins, Denali fault system, Yukon Territory, Canada

Ancient stream-dominated (‘wet’) alluvial fan deposits have received far less attention in the literature than their arid/semi-arid counterparts. The Cenozoic basin fills along the Denali fault system of the northwestern Canadian Cordillera provide excellent examples of stream-dominated alluvial fan deposits because they developed during the Eocene-Oligocene temperate climatic regime in an active strike-slip orogen. The Amphitheatre Formation filled several strike-slip basins in Yukon Territory and consists of up to 1200 m of coarse siliciclastic rocks and coal. Detailed facies analysis, conglomerate: sandstone percentages (C:S), maximum particle size (MPS) distribution, and palaeocurrent analysis of the Amphitheatre Formation in two of these strike-slip basins document the transition from proximal, to middle, to distal and fringing environments within ancient stream-dominated alluvial-fan systems. Proximal fan deposits in the Bates Lake Basin are characterized by disorganized, clast-supported, boulder conglomerate and minor matrix(mud)-supported conglomerate. Proximal facies are located along the faulted basin margins in areas where C:S = 80 to 100 and where the average MPS ranges from 30 to 60 cm. Proximal fan deposits grade into middle fan, channelized, well organized cobble conglomerates that form upward fining sequences, with an average thickness of 7 m. Middle fan deposits grade basinward into well-sorted, laterally continuous beds of normally graded sandstone interbedded with trough cross-stratified sandstone. These distal fan deposits are characteristic of areas where C:S = 20 to 40 and where the average MPS ranges from 5 to 15 cm. Fan fringe deposits consist of lacustrine and axial fluvial facies. Palaeogeographic reconstruction of the Bates Lake Basin indicates that alluvial-fan sedimentation was concentrated in three parts of the basin. The largest alluvial-fan system abutted the strike-slip Duke River fault, and prograded westward across the axis of the basin. Two smaller, coarser grained fans prograded syntaxially northward from the normal-faulted southern basin margin. Facies analysis of the Burwash Basin indicates a similar transition from proximal to distal, stream-dominated alluvial fan environments, but with several key differences. Middle-fan deposits in the Burwash Basin define upward coarsening sequences 50 to 60 m thick composed of fine-grained lithofacies and coal in the lower part, trough cross-stratified sandstone in the middle, and conglomerate in the upper part of the sequence. Upward-coarsening sequences, 90–140 m thick, also are common in the fan fringe lacustrine deposits. These sequences coarsen upward from mudstone, through fine grained, ripple-laminated sandstone, to coarse grained trough cross-stratified sandstone. The upward-coarsening sequences are basinwide, facies independent, and probably represent progradation of stream-dominated alluvial-fan depositional systems. Coal distribution in the Amphitheatre Formation is closely coupled with predominant depositional processes on stream-dominated alluvial fans. The thickest coal seams occur in the most proximal part of the basin fill and in marginal lacustrine deposits. Coal development in the intervening middle and distal fan areas was suppressed by the high frequency of unconfined flow events and lateral channel mobility.     

Transitional submarine fan deposits from the late Precambrian Kongsfjord Formats submarine fan, NE Finnmark, N. Norway

ABSTRACT Three transitional submarine fan environments are recognized in the late Precambrian, 3-2 km thick Kongsfjord Formation in NE Finnmark, North Norway, namely: (1) middle to outer fan; (2) fan lateral margin, and (3) fan to upper basin-slope deposits. Middle to outer fan deposits have a high proportion of sandstones, typically showing Bouma T _bede with T _a in the thicker beds. Deposition was mainly from sheet flows with rare shallow channels. Middle to outer fan deposits are an association of sandstone packets less than 10 m thick but commonly only a few metres thick, interpreted as channels or lobes. Interchannel and fan fringe deposits occur as discrete packets of beds between the thicker bedded and coarser grained channel or lobe deposits. Fan lateral margin deposits are recognized on the basis of their stratigraphic position adjacent to inner/middle fan deposits. They are characterized by: (a) a relatively high proportion of fine-grained sandstone/siltstone turbidites compared to other major fan environments; (b) relatively small channels oriented at various angles to the regional basin slope; (c) lobes associated with channels, and (d) abundant clastic dykes and other soft-sediment deformation. Fan lateral margin deposits are distinguished from the outer fan/basin plain successions on account of the very high proportion of siltstone turbidites comparable with middle fan inter-channel deposits. Fan to upper basin-slope deposits occur at the top of the formation as an alternation of sandstone turbidites, most of which are laterally discontinuous, and very thin-bedded upper basin-slope siltstones with slide deposits.     

鄂尔多斯盆地南部延长组浊积岩体系及油气勘探意义

鄂尔多斯盆地南部的浊积岩体系主要发育于三叠系延长组长7、长6油层组。按其沉积特征可分为坡移浊积扇和滑塌浊积扇,前者相带发育相对齐全,垂向上多期互相叠加,可划分为:斜坡—槽道—内扇相、辫状水道、辫状水道间、辫状水道前缘—中扇相、外扇相和盆地平原相,后者多呈透镜状夹于较深湖亚相的深灰色泥岩中,相带分异不明显,仅可分为中心相和边缘相。两类浊积扇主要分布在近源斜坡带及远源末梢斜坡带。滑塌浊积岩主要由阵发性的偶然因素诱发而成,规模相对较小,储集物性较差;而坡移浊积扇则与地形坡度的有利配置和较稳定的物源补给有关,其沉积厚度大,分布广,储集物性好,是深湖区岩性油藏勘探的主要目标。     

广西横县六景古近纪冲积物研究

广西横县六景火车站南侧,角度不整合覆盖下泥盆统莫丁组和那叫组下段,被新近系大面积覆盖而呈两部分远距离割裂状态的一套“二元结构”特征显著的红色泥砂基底碳酸盐岩粗巨砾岩及其横向相变部分,长期以来未被将其作为一个冲积扇的有机统一体进行研究。经笔者两次实地踏勘,系统采样和分析,以现代山麓冲积扇鉴别特征为主,辅以古冲积扇特征,综合分析认为该套沉积系列相关分割露头分别为一古近系冲积扇所残存扇根、扇中和扇缘。该冲积扇为一典型的古近纪早期干旱气候条件下,母岩区为陡峻碳酸盐岩山体的古山麓冲积扇。     

Deep-sea fan pinch-out geometries and their relationship to fan architecture,Tanqua Karoo basin (South Africa)

Exceptional exposures of Permian basin floor fans (fans 3, 4) and a slope fan (fan 5) in the Tanqua Karoo foreland basin of South Africa have enabled an investigation of the relation between the pinch-out geometries and fan architecture. The pinch-out geometry of fan 3 is characterized by the down dip transition from thin to medium bedded sheet deposits to pinch-out fingers, which are overlain by younger prograding sheet deposits. This geometry reflects the progradational stacking pattern of the fan. In contrast, the fan 4 pinch-out fingers consist of stacked channel fills in the same conduit. This pinch-out configuration relates to the dominant aggradational style observed on the mid and distal parts of fan 4. Fan 5 represents a slope fan comprising an axial channel conduit, which branches down slope into three distributary channels. The distal fan is characterized by larger channel fills, which may represent bypass channels to other basin floor fans. The very thick-bedded nature of the youngest channel fill unit suggests early bypass followed by retrogradation as indicated by the presence of thinner bedded heterolithic channel fill deposits along the axial conduit. Although some of the massive pinch-out channels exhibit basal scour, their depositional morphology suggests that they mainly originated due to the infill of subtle topographic depressions by low concentration turbidity currents. Instead of describing these features as channel fills, the use of the term pinch-out fingers is preferred.     

Sea level controls on the textural characteristics and depositional architecture of the Hueneme and associated submarine fan systems, Santa Monica Basin, California

Hueneme and Dume submarine fans in Santa Monica Basin consist of sandy channel and muddy levee facies on the upper fan, lenticular sand sheets on the middle fan, and thinly bedded turbidite and hemipelagic facies elsewhere. Fifteen widely correlatable key seismic reflections in high-resolution airgun and deep-towed boomer profiles subdivide the fan and basin deposits into time-slices that show different thickness and seismic-facies distributions, inferred to result from changes in Quaternary sea level and sediment supply. At times of low sea level, highly efficient turbidity currents generated by hyperpycnal flows or sediment failures at river deltas carry sand well out onto the middle-fan area. Thick, muddy flows formed rapidly prograding high levees mainly on the western (right-hand) side of three valleys that fed Hueneme fan at different times; the most recently active of the lowstand fan valleys, Hueneme fan valley, now heads in Hueneme Canyon. At times of high sea level, fans receive sand from submarine canyons that intercept littoral-drift cells and mixed sediment from earthquake-triggered slumps. Turbidity currents are confined to ‘underfit’ talweg channels in fan valleys and to steep, small, basin-margin fans like Dume fan. Mud is effectively separated from sand at high sea level and moves basinward across the shelf in plumes and in storm-generated lutite flows, contributing to a basin-floor blanket that is locally thicker than contemporary fan deposits and that onlaps older fans at the basin margin. The infilling of Santa Monica Basin has involved both fan and basin-floor aggradation accompanied by landward and basinward facies shifts. Progradation was restricted to the downslope growth of high muddy levees and the periodic basinward advance of the toe of the steeper and sandier Dume fan. Although the region is tectonically active, major sedimentation changes can be related to eustatic sea-level changes. The primary controls on facies shifts and fan growth appear to be an interplay of texture of source sediment, the efficiency with which turbidity currents transport sand, and the effects of delta distributary switching, all of which reflect sea-level changes.     

柴北缘古近系－新近系沉积相特征及沉积模式

通过野外露头和岩心观察、薄片鉴定分析,结合测井和录井资料,对柴达木盆地北缘古近系-新近系的沉积相及其特征进行了深入研究。研究表明,该区主要发育冲积扇．辫状河．辫状河三角洲．滨浅湖沉积体系,建立了相应的辫状河相沉积序列及沉积模式、间歇性湖泊沉积相模式。研究区辫状河相发育两套不同地层,中下部广泛发育粒度粗的河床亚相沉积,河漫滩亚相发育不多;而中上部河床亚相沉积较少发育,粒度细的河漫滩亚相沉积则急剧增加。这是由于降水量及气候变化造成冲积扇及河流水动力变化形成的。这种变化还造成沉积物供应速率的变化以及湖平面升降的变化,导致湖盆湖岸线的迁移与河流及三角洲沉积范围的变迁,这种变迁最终造成了沉积序列上粒度粗细的频繁变化及有利储集岩和区域盖层的发育。     

珠江口盆地白云凹陷晚渐新统-早中新统沉积特征及演化规律

以珠江口盆地白云凹陷钻井、测井、地震和古生物资料为基础,结合前人研究成果,系统的分析了白云凹陷晚渐新统到早中新统沉积相发育特征及凹陷沉积充填演化过程。研究结果表明,珠海组下部发育大型陆架边缘三角洲沉积,地震反射特征表明该三角洲发育三期;钻遇水下分支河道、支流间湾、河口坝及远砂坝微相,沉积物以富砂为特征,发育冲刷-充填构造、递变层理及较粗的水平潜穴等多种构造;珠海组上部为浅海相,沉积物以海相砂泥岩互层为主,此时期陆架坡折带位于白云凹陷南坡;珠江组沉积时期,海平面升降旋回频繁,陆架坡折带迁至凹陷北坡。随着古珠江流域扩大,沉积物输入量增加,在珠江组下部发育了深水扇,沉积物以细-粗砂岩为主,夹少量粉砂岩及深海泥岩,发育颗粒流、液化流、浊流及碎屑流等四种主要的重力流,钻遇内扇水道,中扇废弃水道及水道间漫溢沉积,外扇深海泥沉积;珠江组上部为半深海相,沉积物以深海泥岩为主。      

内蒙古西乌旗下二叠统寿山沟组海底扇的发现及意义

西乌珠穆沁旗地区下二叠统寿山沟组沉积环境的认识尚缺乏确凿证据.对塔宾庙林场剖面寿山沟组的研究认为是一套海相碎屑岩沉积,岩石类型以长石岩屑砂岩为主,发育粒序层理和平行层理,属于鲍马序列中的A和B段,并伴有Zoophycos相遗迹化石组合,属于海底扇沉积.根据岩石类型、砂岩的单层厚度、砂岩和泥岩的比值,划分出内扇、中扇、外扇3个亚相,内扇亚相发育水道砾岩,外扇亚相发育复理石相遗迹化石.该区寿山沟组厚层暗色泥岩,是良好的烃源岩,而扇体可以作为有效的储层,具有很好的油气勘探前景.     

西部凹陷南部沙三段储层沉积特征及含油气性分析

西部凹陷南部为辽河油田的重点探区之一，具有十分优越的石油地质条件。本区在沙三期断陷活动强烈，发育了巨厚的深水泥岩和多期次缓坡型湖底扇沉积，为油气聚集成藏提供了丰富的油气源条件和储集条件。沙三段沉积时期，在西部凹陷南部发育有齐家-杜家台和锦州-欢喜岭两大湖底扇沉积体系。受物源区的距离、基底构造和主干断层活动的控制，湖底扇平面上具有分带性，可划分为内扇、中扇和外扇三个亚相带。齐杜和锦欢湖底扇在沙三早期规模较小，中期规模最大，晚期萎缩。本区沙三段储层物性普遍较差，以低孔-低渗、特低孔-特低渗储层为主，其中湖底扇中扇辫状沟道微相砂体储集性能最好，平面上依中扇辫状沟道→中扇前缘→外扇亚相储层物性由好变差。储集性能的优劣主要受母岩区岩性、沉积作用、成岩作用等多种因素控制。沙三段湖底扇砂体在区内分布广泛，处于成熟生油岩的包围之中，位于油气运移的有利指向上，成藏条件优越，勘探前景广阔。     

准噶尔盆地玛湖凹陷夏子街扇区三叠系百口泉组沉积演化特征*

玛湖凹陷是准噶尔盆地最具规模的油气聚集带与勘探区,发育以砾岩为主、具有较强非均质性的粗粒沉积复杂地层。对粗粒沉积体的精细刻画有助于研究沉积体内部的非均质性特征。应用储层构型分析法,结合研究区岩心、测井、录井资料,对玛湖凹陷夏子街扇区三叠系百口泉组沉积体内部9个级次构型要素的几何形态、大小、方向以及相互之间的叠置关系进行了表征,识别出12种岩石相类型以及10种由岩石相组合而成的沉积微相类型。通过分析沉积微相在垂向、平面上的不同组合特征,扇体的类型受沉积环境影响发生变化,逐渐由冲积扇、河流扇转换为扇三角洲,整体反映了湖平面上升或沉积物供给量逐渐减小的沉积背景。分析夏子街扇区各期次的扇体特征,包括长轴、短轴距离、长轴短轴比、扇根与扇缘厚度变化、扇体坡度变化、扇体最大粒径变化等,认为扇体顺物源方向有以下变化趋势: 沉积物粒径大小随河道搬运逐渐减小,减小的幅度受扇体坡度影响,坡度越陡沉积物粒径减小的越快;河道数量减少,流量降低;河道沉积物在横向和纵向上的连通性逐渐降低;砂岩、砾岩厚度逐渐减小,泥岩厚度逐渐增加,湖相沉积变得较为发育。总结玛湖凹陷百口泉组的各期次扇体共可归纳出6种扇体模式: 冲积扇、冲积—河流扇、河流—末梢扇、河流扇—扇三角洲、扇三角洲、大型河流扇。     

Early Pleistocene glacial outwash deposits in the eastern San Joaquin Valley, California: a model for humid-region alluvial fans

ABSTRACT The early Pleistocene Laguna and Turlock Lake Formations and China Hat and Arroyo Seco Gravels along the east side of the San Joaquin Valley, California, were deposited in alluvial fans and marginal lakes. Upward-coarsening sequences of silt-sand-gravel record westward progradation of glacial outwash fans from the Sierra Nevada into proglacial lakes in the San Joaquin Valley. Distinctive sedimentary features delineate lacustrine, prodelta, and delta-front facies within fan-margin deposits and lower, middle, and upper-fan facies within alluvial-fan deposits. The lacustrine facies consists of a few metres of thinly and evenly bedded, rhythmically laminated claystone and clayey siltstone in varved couplets. Draped lamination, sinusoidal lamination, and load and pillar structures occur in some beds. Siltstone and claystone grade upward to slightly thicker wavy beds of siltstone and very fine-grained unconsolidated sand deposited in a prodelta setting. Convolute laminae within deformed steeply dipping foreset beds suggest slumping on the prodelta slope. The prodelta facies grades up to the delta-front facies, which consists of burrowed and bioturbated cross-bedded fine sand. Deltaic deposits are 5–6 m thick. The lower-fan facies forms the base of the fan sequence and consists of several metres of irregularly bedded, laminated, oxidized siltstone and fine sand. The middle-fan facies consists of cross-bedded, medium-grained to gravelly sand-filled channels cut into the lower-fan facies. Interbedded lens-shaped siltstone beds 2 m thick and several metres across were deposited in abandoned channels. The upper-fan facies consists of moderately to strongly weathered clayey gravel and sand containing pebble imbrication and crude stratification. Argillization during post-depositional soil formation has blurred the distinction between mud-supported debris-flow deposits and clast-supported channel deposits, but both are present in this facies. The deposits described here demonstrate the need for additional fan models in order to incorporate the variety of deposits developed in alluvial fan sequences deposited in humid climates. In previous models based on arctic fans, debris flows, abandoned channels, or widespread siltstone beds are not present in fan sequences, nor are marginal lacustrine and deltaic deposits well represented.     

Facies and depositional model of alluvial fan dominated by episodic flood events in arid conditions: An example from the Quaternary Poplar Fan,north-western China

Alluvial fans are usually constructed through episodic flood events. Despite the significance of these ephemeral floods on the morphodynamics of alluvial fans, depositional responses to the variations in flood conditions are still poorly documented. This greatly limits the ability to interpret ancient sedimentary successions of fans and the associated flood hydrodynamics. The Quaternary Poplar Fan from endorheic Heshituoluogai Basin provides an optimal case for addressing this issue. Based on the variations in facies associations and flood conditions, three depositional stages – namely; lobe building stage, channel building stage and the abandonment stage – are identified. During the lobe building stage the Poplar Fan is predominately constructed through incised channel flood, sheetflood and unconfined streamflood, with coeval development of distal surficial ephemeral ponds. The channel building stage is characterized by the development of gravelly braided rivers. However, only scour pool fill deposits are preferentially preserved in the Poplar Fan. During the abandonment stage, erosional lags and aeolian sands randomly occur throughout the fan, while gully deposits can only be found in the distal fan. The distinctive facies architecture of the Poplar Fan is likely to be the result of periodicity of climate fluctuations between wetter and drier conditions during the Late Pleistocene to Holocene. The ephemeral floods formed under wetter conditions usually show high discharge and sediment concentrations which facilitate the lobe building processes. During the drier periods, only gravelly braided rivers can be developed through ephemeral floods as the intensity and frequency in precipitation, discharge and sediment concentrations of the flood flows significantly decrease. The abandonment stage of the fan may occur between recurring flood episodes or during the driest periods. Furthermore, the long-term (10⁵ to 10⁶ year) geomorphic evolution of the Poplar Fan shows the influence of tectonic activities. The ongoing thrust uplift tectonic activities have caused destruction of the fan but can also facilitate the fan-head trench/incision of the fan, which in turn facilitate the progradation of the fan. This study proposes a new depositional model for alluvial fans constructed through episodic flood events, which shows the character of both sheet-flood dominated and stream-flow dominated end members of alluvial fans. These findings supplement the understanding of the variability of the alluvial fans and provide means to characterize rock record of alluvial fans and their associated flood and climate conditions.     

伊犁盆地水西沟群冲积扇-扇三角洲沉积体系研究

以沉积岩石学、陆相沉积盆地分析和现代水成铀矿理论为指导,运用详实的地质资料和前人的研究成果,系统研究水西沟群沉积物的微观和宏观地质信息,恢复沉积时期的地貌特征和沉积过程,重新展示碎屑物的形成过程及其演化.将水西沟群的岩石及沉积构造特征与现有资料对比,初步认为中下侏罗统水西沟群是冲积体系的产物,即冲积扇-扇三角洲沉积体系综合作用的产物.每一种沉积体系均已细分到亚相和微相,冲积扇体系有扇根、扇中、扇端3个亚相和河床充填、漫流沉积、辫状河道、沼泽沉积等微相.扇三角洲沉积体系有扇三角洲平原、扇三角洲前缘、前扇三角洲3个亚相和辫状河道、河漫沼泽、河口坝、远砂坝等微相.     

尹犁盆地水西沟群冲积扇-扇三角洲沉积体系研究

以沉积岩石学、陆相沉积盆地分析和现代水成铀矿理论为指导，运用详实的地质资料和前人的研究成果，系统研究水西沟群沉积物的微观和宏观地质信息，恢复沉积时期的地貌特征和沉积过程，重新展示碎屑物的形成过程及其演化．将水西沟群的岩石及沉积构造特征与现有资料对比，初步认为中下侏罗统水西沟群是冲积体系的产物，即冲积扇-扇三角洲沉积体系综合作用的产物．每一种沉积体系均已细分到亚相和微相，冲积扇体系有扇根、扇中、扇端3个亚相和河床充填、漫流沉积、辫状河道、沼泽沉积等微相，扇三角洲沉积体系有扇三角洲平原、扇三角洲前缘、前扇三角洲3个亚相和辫状河道、河漫沼泽、河口坝、远砂坝等微相。     

Muddy lateral accretion and low stream power in a sub-recent confined channel belt, Rhine-Meuse delta, central Netherlands

The Hennisdijk fluvial system in the central Rhine-Meuse delta is an abandoned Rhine distributary that was active on a wide floodplain from 3800 to 3000 years BP . Cross-sectional geometry, lithological characteristics and planform patterns of the channel-belt deposits indicate lateral migration of the Hennisdijk palaeochannel. Channel-belt deposits are around 10 m thick and 200–400 m wide. A gravelly facies near the base of the channel-belt deposits represents channel-lag and lower point-bar deposits. The axis of the channel belt is dominated by a sandy facies (medium and coarse sand), showing an overall fining upward trend with multiple cycles. This facies is interpreted as lower and middle point-bar deposits. The sandy facies is capped by a muddy facies, which is 1–2 m thick near the axis of the channel belt and thickens to 5–6 m along the margins. It laterally interfingers with the sandy facies that occurs near the channel-belt axis, but it has sharp, erosive outer contacts marking the edges of the channel belt. The muddy facies comprises inclined heterolithic stratification (IHS) (fine/medium sand–mud couplets) in its upper part. The relatively thin muddy facies with IHS that occurs near the channel-belt axis is interpreted as upper point-bar deposits with lateral accretion surfaces, formed under marine influence. Along the margins of the channel belt the muddy facies consists of thick, fairly homogeneous, successions of mud with variable sand content, and fine sand. Based on facies geometry and position, this part of the muddy facies is interpreted as counterpoint deposits, formed along the upstream limb of the concave bank of a channel bend. Counterpoint accretion seems to have been associated with the confined nature of the channel belt, which was the result of low stream power (4·5–7·8 W m⁻², based on reconstructions of palaeodischarge and channel slope) and cohesive bank material, i.e. clayey floodbasin deposits with intercalated peat beds occurring next to the channel belt. In the literature, counterpoint accretion is mostly reported from alluvial valleys, where meandering is confined by limited floodplain width, whereas muddy lateral accretion surfaces are commonly reported from much wider marine-influenced floodplains. The present study shows juxtaposition of both forms of muddy channel deposits in a low-energy, wide coastal plain setting, where preservation potential is considerable.