Numerical simulation of rifting in the northern Viking Graben: the mutual effect of modelling parameters

Numerous basin modelling studies have been performed on the Viking Graben in the northern North Sea during the past decades in order to understand the driving mechanisms for basin evolution and palaeo temperature estimations. In such modelling, it is important to include lithospheric flexure. The values derived for the lithospheric strength by these studies vary considerably (i.e. up to a factor of 30). In this study, which is based on new interpretation of a regional transect, we show that both the estimated value of the effective elastic thickness and the derived β-profile are dependent on the assumed value of the depth of necking. The use of models that implicitly set the level of necking at a depth of 0 km generally leads to an underestimation of the lithospheric strength, and an overestimation of the thinning factors. In the northern Viking Graben, a necking depth at intermediate crustal levels gives results comparable to the observations. Extension by faulting is modelled to be a significant factor. In conclusion, rifting in the northern Viking Graben can be explained with various models of effective elastic thicknesses (EET) varying from 1 km for a zero necking depth to the depth of the 450 °C isotherm for an intermediate level of necking.It is also shown that the development of the basin during the post-rift phase cannot be explained by pure shear/simple shear extension. Two mechanisms are proposed here to explain the post-rift subsidence pattern, namely intra-plate stress and phase boundary migration. The two extreme models for EET mentioned above (1 km for a zero necking depth to the depth of the 450 °C isotherm for an intermediate level of necking) give very different responses to compressional stress, the latter gives basically no response for realistic intra-plate stress.     

Seismic stratigraphic analysis of non-marine Lower Cretaceous strata in the Wessex and North Celtic Sea Basins

Non-marine strata of Early Cretaceous age ('Wealden facies') are found at outcrop in the type localities of the Wessex Basins, southern England (and adjacent subsurface) and in extensive and thick successions filling the North Celtic Sea Basin. Sedimentology, paleontology, petrology and geochemistry have traditionally been used as evidence in determining the climatic, tectonic and sea level controls on Wealden facies, sedimentary processes and stratigraphy. Analysis of seismic data, through seismic facies and sequence stratigraphic analysis, allows direct comparison of the Wealden in these basins and new interpretations to be made of the tectonic and depositional influences. In the north-eastern end of the North Celtic Sea Basin, tectonic controls on seismic facies can be demonstrated and are related to coarse-grained fan-delta horizons documented in core. In the south-western North Celtic Sea Basin, adjacent to the Cretaceous proto-Atlantic, tectonic controls are less apparent, and changes in relative sea level were probably more important in controlling the preservation of stratigraphic sequences. Where the non-marine Lower Cretaceous succession is imaged clearly, the stratigraphic similarity between parts of the North Celtic Sea and the Weald and Channel Basins suggests a wider control by relative sea-level fluctuations. However, important variations in seismic facies within the basins indicate localized, dominant tectonic control. The recognition of a very distinctive 'lower' Wealden seismic facies, observed as undulatory (?channelized) and downlapping reflections, is contrasted with either the parallel or synsedimentary fault-dominated 'upper' Wealden facies. These seismic characteristics reflect the previously recognized climatic/tectonic change from Hastings to Weald Clay Group environments. The debate on tectonics versus eustacy is further complicated: palaeoclimate appears to be a third process responsible for stratigraphic variation.     

塔里木盆地北部古生代层序地层系统

层序地层系统，本质上就是以各种不同级次的海平面变化所控制的不同级次的沉积层序为单位，在年代地层学格架中所建立起来的地层系统。本文以露头剖面的层序地层研究为主要依据，结合生物地层和地震地层的研究成果，在进行详细层序划分的基础上，在塔里木盆地北部古生代地层中建立起了由不同周期叠加的海平面变化所控制的不同级次的层序所组成的层序地层系统。通过生物地层和层序地层相结合的方法，厘定并标定了一系列重要地质界线的     

松辽盆地北部裂后反转期层序地层格架及其形成机制

应用高精度层序地层学分析的原理和方法, 通过对研究区新处理的区域性地震反射剖面、测井和岩心等资料的综合分析, 建立了松辽盆地北部裂后反转期层序地层格架.通过盆地的充填记录、湖平面变化和区域演化等信息, 论证了松辽盆地裂后反转期各级界面的地质属性, 分析了其形成机制, 建立了盆地的沉积演化过程模型.研究表明, 盆地裂后反转期发育的一级界面SB02和二级界面SB03、SB11均是区域构造挤压事件的响应界面; 而湖平面的变化和物源供给导致了三级层序体系域构成样式的多样化; 嫩江组二、三段识别出的7个四级层序则是在三级湖平面旋回的高位稳定期盆地物源充足、沉降速率较低的条件下形成的.本研究为松辽盆地中浅层隐蔽油气勘探提供了重要的等时地层对比格架.      

Seismic stratigraphy and the sedimentation history in the Laxmi Basin of the eastern Arabian Sea: Constraints from IODP Expedition 355

Detailed interpretation of seismic stratigraphic sequences in the Laxmi Basin of the eastern Arabian Sea are presented in this study using closely spaced high resolution multi-channel seismic (MCS) data. Our stratigraphic interpretation is further corroborated using recent drilling results in the Laxmi Basin, derived from the long sediment cores collected during International Ocean Discovery Program (IODP) Expedition 355. Integrated core-log interpretation discussed in the present study, offer important insights about the lithostratigraphic variations in this region. Analyses of multi-channel seismic reflection data reveal five depositional sequences (ranging from Paleocene to Recent) that led to the development of this marginal basin since the Cenozoic period. Regional igneous basement is successfully imaged, which was also validated by deep sea coring during the IODP Expedition 355. In the present study, we primarily focus on the post-rift sedimentation in the Laxmi Basin and its possible mechanisms. Our detailed interpretation in the prevailing tectonic framework of the basin suggests that near-shelf oldest volcaniclastic sedimentation immediately overlying the acoustic basement is linked to the onset of India–Madagascar and India–Seychelles rifting activities during the Late Cretaceous period. Eventually, during the Early-Mid to Late Miocene, the basin received maximum sedimentation dominantly through an extensive mass transport mechanism implying possible large-scale deformation on the Indian shelf. Subsequent sediment input to the basin appears to have been fed variably via the Indus Fan as well as coastal discharge from the Indian mainland. The total sediment thickness in the Laxmi Basin ranges from 1.1 to 3.5 km. New stratigraphic information and sediment isopach maps presented here provide vital information about syn- and post-rift sedimentation pattern in the region and their long term tectonic implications.     

Stratigraphic evolution of an outcropping continental slope system, Tres Pasos Formation at Cerro Divisadero, Chile

Depositional slope systems along continental margins contain a record of sediment transfer from shallow‐water to deep‐water environments and represent an important area for natural resource exploration. However, well‐preserved outcrops of large‐scale depositional slopes with seismic‐scale exposures and tectonically intact stratigraphy are uncommon. Outcrop characterization of smaller‐scale depositional slope systems (i.e. < 700 m of undecompacted shelf‐to‐basin relief) has led to increased understanding of stratigraphic packaging of prograding slopes. Detailed stacking patterns of facies and sedimentary body architecture for larger‐scale slope systems, however, remain understudied. The Cretaceous Tres Pasos Formation of the Magallanes Basin, southern Chile, presents a unique opportunity to evaluate the stratigraphic evolution of such a slope system from an outcrop perspective. Inherited tectonic relief from a precursor oceanic basin phase created shelf‐to‐basin bathymetry comparable with continental margin systems (～1000 m). Sedimentological and architectural data from the Tres Pasos Formation at Cerro Divisadero reveal a record of continental margin‐scale depositional slope progradation and aggradation. Slope progradation is manifested as a vertical pattern exhibiting increasing amounts of sediment bypass upwards, which is interpreted as reflecting increasing gradient conditions. The well‐exposed, seismic‐scale outcrop is characterized by four 20 to 70 m thick sandstone‐rich successions, separated by mudstone‐rich intervals of comparable thickness (40 to 90 m). Sedimentary body geometry, facies distribution, internal bedding architecture, sandstone richness and degree of amalgamation were analysed in detail across a continuous 2·5 km long transect parallel to depositional dip. Deposition in the lower section (Units 1 and 2) was dominated by poorly channellized to unconfined sand‐laden flows and accumulation of mud‐rich mass transport deposits, which is interpreted as representing a base of slope to lower slope setting. Evidence for channellization and indicators of bypass of coarse‐grained turbidity currents are more common in the upper part of the > 600 m thick succession (Units 3 and 4), which is interpreted as reflecting increased gradient conditions as the system accreted basinward.     

Sedimentology,stratigraphy and palynological occurrences of the late Cretaceous Erlian Formation,Erlian Basin,Inner Mongolia,People's Republic of China

The Erlian Basin is one of the non-marine Cretaceous basins of north-east China that developed during the late Mesozoic continental extension in eastern Asia. This basin experienced two major tectonic events: (i) a syn-rift stage that was dominated by a fluvial–lacustrine depositional environment and (ii) a post-rift stage that was dominated by a fluvial environment. A new sedimentological study performed on Erlian Formation drill cores has led to the determination of an architectural model and to the subsequent characterisation of the stratigraphic evolution of this sedimentary unit during the late Cretaceous. The palynological occurrences that were identified in samples provided a possible stratigraphical age for the Erlian Formation.Sediments of the Erlian Formation occur at the top of the Cretaceous stratigraphic column of the Erlian Basin and were deposited during the post-rift stage. Facies architecture and the ideal succession of facies that were identified for this formation exhibit two different members, both dominated by a fluvial depositional environment: (i) the lower member, which is dominated by channels of a braided river system and (ii) the upper member, which is dominated by overbank deposits. The lower member expresses a tectonically induced uplift as indicated by channels clustering under negative accommodation, whereas a period of stratigraphic base-level rise that is associated with an increase of accommodation is identified in the upper member. Therefore the Erlian Formation highlights an alternation of short uplifts that were dominated by braided fluvial channel deposits with periods of stratigraphic base-level rise that were dominated by overbank deposits. This sedimentological architecture has significant metallogenic implications for the origin of confined permeable sandstone layers, which represent adequate host-rocks for roll front-type uranium deposits.The palynological assemblage Exesipollenites, Ulmipollenites/Ulmoideipites, Buttinia and Momipites that were recognised in two samples of the Erlian Formation has revealed a post-late Campanian age therefore more likely indicating a late Cretaceous age of deposition for the sediments of the Erlian Formation.     

3D and 4D controls on carbonate depositional systems: sedimentological and sequence stratigraphic analysis of an attached carbonate platform and atoll (Miocene, Níjar Basin, SE Spain)

This study investigates the controls on three-dimensional stratigraphic geometries and facies of shallow-water carbonate depositional sequences. A 15 km² area of well-exposed Mid to Late Miocene carbonates on the margin of the Níjar Basin of SE Spain was mapped in detail. An attached carbonate platform and atoll developed from a steeply sloping basin margin over a basal topographic unconformity and an offshore dacite dome (Late Miocene). The older strata comprise prograding bioclastic (mollusc and coralline algae) dominated sediments and later Messinian Porites reefs form prograding and downstepping geometries (falling stage systems tract). Seven depositional sequences, their systems tracts and facies have been mapped and dated (using Sr isotopes) to define their morphology, stratigraphic geometries, and palaeo-environments. A relative sea-level curve and isochore maps were constructed for the three Messinian depositional sequences that precede the late Messinian evaporative drawdown of the Mediterranean. The main 3D controls on these depositional sequences are interpreted as being: (i) local, tectonically driven relative sea-level changes; (ii) the morphology of the underlying sequence boundary; (iii) the type of carbonate producers [bioclastic coralline algal and mollusc-dominated sequences accumulated in lows and on slopes of < 14° whereas the Porites reef-dominated sequence accumulated on steep slopes (up to 25°) and shallow-water highs]. Further controls were: (iv) the inherited palaeo-valleys and point-sourced clastics; (v) the amount of clastic sediments; and (vi) erosion during the following sequence boundary development. The stratigraphy is compared with that of adjacent Miocene basins in the western Mediterranean to differentiate local (tectonics, clastic supply, erosion history, carbonate-producing communities) versus regional (climatic, tectonic, palaeogeographic, sea-level) controls.     

松辽盆地坳陷期湖盆层序地层研究

以横跨松辽盆地北部东西向大剖面为例,综合应用钻井岩芯、测井曲线、古生物和地震资料,进行松辽盆地北部坳陷期(早白垩世晚期—晚白垩世)湖盆层序地层学研究,共识别出2个二级层序界面和13个三级层序界面,划分出2个二级层序和13个三级层序。2个二级层序以姚家组底界不整合面为界,自下而上命名为SSI、SSII。     

A depositional model for deep‐lacustrine,partially confined,turbidite fans: Early Cretaceous,North Falkland Basin

This paper presents a model of facies distribution within a set of early Cretaceous, deep‐lacustrine, partially confined turbidite fans (Sea Lion Fan, Sea Lion North Fan and Otter Fan) in the North Falkland Basin, South Atlantic. As a whole, ancient deep‐lacustrine turbidite systems are under‐represented in the literature when compared with those documented in marine basins. Lacustrine turbidite systems can form extensive, good quality hydrocarbon reservoirs, making the understanding of such systems crucial to exploration within lacustrine basins. An integrated analysis of seismic cross‐sections, seismic amplitude extraction maps and 455 m of core has enabled the identification of a series of turbidite fans. The deposits of these fans have been separated into lobe axis, lobe fringe and lobe distal fringe settings. Seismic architectures, observed in the seismic amplitude extraction maps, are interpreted to represent geologically associated heterogeneities, including: feeder systems, terminal mouth lobes, flow deflection, sinuous lobe axis deposits, flow constriction and stranded lobe fringe areas. When found in combination, these architectures suggest ‘partial confinement’ of a system, something that appears to be a key feature in the lacustrine turbidite setting of the North Falkland Basin. Partial confinement of a system occurs when depositionally generated topography controls the flow‐pathway and deposition of subsequent turbidite fan deposits. The term ‘partial confinement’ provides an expression for categorising a system whose depositional boundaries are unconfined by the margins of the basin, yet exhibit evidence of internal confinement, primarily controlled by depositional topography. Understanding the controls that dictate partial confinement; and the resultant distribution of sand‐prone facies within deep‐lacustrine turbidite fans, is important, particularly considering their recent rise as hydrocarbon reservoirs in rift and failed‐rift settings.     

The Glueckstadt Graben, a sedimentary record between the North and Baltic Sea in north Central Europe

The Glueckstadt Graben is one of the deepest post-Permian structures within the Central European Basin system and is located right at its “heart” at the transition from the North Sea to the Baltic Sea and from the Lower Saxony Basin to the Rynkoebing–Fyn High.The Mesozoic to recent evolution is investigated by use of selected seismic lines, seismic flattening and a 3D structural model. A major tectonic event in the latest Middle–Late Triassic (Keuper) was accompanied by strong salt tectonics within the Glueckstadt Graben. At that time, a rapid subsidence took place within the central part, which provides the “core” of the Glueckstadt Graben. The post-Triassic tectonic evolution of the area does not follow the typical scheme of thermal subsidence. In contrast, it seems that there is a slow progressive activation of salt movements triggered by the initial Triassic event. Starting with the Jurassic, the subsidence centre partitioned into two parts located adjacent to the Triassic “core.” In comparison with other areas of the Central European Basin system, the Glueckstadt Graben was not strongly affected by additional Jurassic and Cretaceous events. During the late Jurassic to Early Cretaceous, the area around the Glueckstadt Graben was affected by relative uplift with regional erosion of the elevated relief. However, subsidence was reactivated and accelerated during the Cenozoic when a strong subsidence centre developed in the North Sea. During Paleogene and Quaternary–Neogene, the two centres of sedimentation moved gradually towards the flanks of the basin.The data indeed point toward a control of post-Permian evolution by gradual withdrawal of salt triggered by the initial exhaustion along the Triassic subsidence centre. In this sense, the Glueckstadt Graben was formed at least partially as “basin scale rim syncline” during post-Permian times. The present day Hamburger, East and Westholstein Troughs are the actual final state of this long-term process which still may continue and may play a role in terms of young processes and, e.g., for coastal protection.     

Sedimentary response to the intracontinental orogenic process: insight from the anatomy of a small Mesozoic basin in western Yanshan,northern North China

ABSTRACT

The intra-continental orogeny and tectonic evolution of the Mesozoic Yanshan fold-thrust belt (YFTB) in the northern North China Craton (NCC) have been strongly debated. Here, we focus on the Shangyi basin, located in the centre of the YFTB. An integrated analysis of sedimentary facies, palaeocurrents, clast compositions, and detrital zircon dating of sediments was adopted to determine the palaeogeography, provenance, basin evolution, and intra-continental orogenic process. The Shangyi basin comprises the well-exposed Early–early Middle Jurassic Xiahuayuan Formation and the Longmen Formation, and the Late Jurassic–Early Cretaceous Tuchengzi Formation. Based on the 18 measured sections, five facies associations – including alluvial fan, fluvial, delta, lacustrine, and eolian facies – have been identified and described in detail. The onset of the Shangyi basin was filled with fluvial, deltaic, and lacustrine deposits controlled by the normal fault bounding the northern basin, corresponding to the pre-orogeny. In the Middle Jurassic, the cobble–boulder conglomerates of alluvial fan, as molasse deposits, were compatible with the syn-orogeny of the Yanshan movement, which played a critical role in northern North China and even East Asia. After the depositional break in the Middle–Late Jurassic, the Shangyi basin, controlled by the normal fault present in the north of the basin, re-subsided and quickly expanded southward with thick sedimentation, which is correlative with the post-orogeny. Combined with A-type granites, metamorphic core complexes, mafic dikes, and rift basins of the Late Jurassic–early Early Cretaceous present in the northern NCC and Mongolia, significant extension was widespread in the northern NCC and even in northeast Asia. Moreover, vertical changes of provenance indicate that the Taihang Mountain and the Inner Mongolia palaeo-uplift (IMPU) present at the west and north of the basin, respectively, experienced uplift twice in the Middle–Late Jurassic and Early Cretaceous, resulting in a regional depositional break.     

华北石炭-二叠纪层序地层格架及其特征

华北石炭二叠纪沉积建造由两部分组成,下部为碳酸盐岩与硅质碎屑岩构成的含煤建造,上部为硅质碎屑岩红色建造。根据不整合面及其它识别层序界面的标志,该沉积建造可划分为５个沉积层序。ＤＳ_１、ＤＳ_２、ＤＳ_３层序属陆表海型层序,其底界面为Ⅰ_ｅ型层序界面,层序内仅发育海侵体系域和高位体系域;ＤＳ_４层序为过渡型层序,由低位体系域、海侵体系域和高位体系域构成;ＤＳ_５层序为湖泊型层序,包括低水位体系域、水进体系域和高位体系域。盆地充填超层序（ＤＳ_１-ＤＳ_５）的发育受控于全球二级相对海平面变化,而沉积层序的发育则与区域性造山作用引起的三级海平面变化有关。     

南海北部珠江口盆地陆架边缘斜坡带层序结构和沉积演化及控制作用

南海盆地是东南亚陆缘最大的、含有丰富油气等资源的边缘海盆地.对于南海大陆斜坡带的发育、沉积演化与南海盆地构造作用及动力学过程的响应关系等方面缺乏深入认识.依据地震、测井及岩心等丰富资料,对南海珠江口盆地东南部陆架边缘斜坡带的层序地层、沉积-地貌演化及其对构造、海平面和沉积物供应变化的响应关系开展了系统性的研究.研究表明盆地的沉积充填可划分为由区域性不整合所限定的7个复合（二级）层序（CS1-CS7）.复合层序CS3-CS7（上渐新统-第四系）均由区域性的海侵-海退旋回构成;其内可进一步划分出由局部不整合或水退-水进的转换面为界的20个次级层序（三级）.研究识别出包括外陆架至陆架边缘三角洲、前三角洲-斜坡扇、陆架边缘前积体、单向迁移的横向底流-斜坡重力流复合水道、大型斜坡下切峡谷、泥质斜坡扇、斜坡滑塌泥石流复合体以及大规模软沉积物变形体等沉积体系或沉积复合体,它们在不同层序具有特定的时空分布,构成多种沉积样式.短周期（三级）的沉积旋回变化与Haq的海平面变化曲线总体上可对比,但长周期的海侵和海退则明显不同,受到了构造隆升和沉降等的控制.陆架边缘沉积演化可划分出裂后早期海底扩张沉积（破裂层序）、裂后晚期海底扩张沉积、后海底扩张等构造-沉积演化阶段.裂谷作用晚期的热隆起、构造差异沉降、裂后热衰减沉降以及上新世以后的东侧碰撞等对主要不整合的形成和海侵-海退产生了重要的影响.晚渐新世至中中新世发育的复合层序（CS3和CS4）记录了裂后海底扩张到停止的大陆斜坡沉积过程;而裂后早期的沉积层序（CS3）为破裂层序,以发育大型的陆架边缘三角洲-前三角洲斜坡扇体系构成的前积层为特征.气候变化和季风加强可能增强了晚渐新世-早中新世和更新世沉积期的沉积物供应,为大规模陆架边缘三角洲体系的发育提供了充足的物源供给.发育于陆架边缘的三角洲-滨岸碎屑体系和共生的前三角洲斜坡扇体系构成区内最重要的油气勘探对象.      

北海盆地维京地堑新近纪下切谷发育主控因素及其内部充填特征*

下切谷是陆地上一种常见的侵蚀地貌,古今均十分发育,但是不同盆地、不同时代发育的下切谷,无论是在沉积充填特征还是平面展布形态等多个方面都大相径庭。为此,作者依据曼宁公式进行理论推导,再结合分析北海盆地维京地堑发育的典型下切谷实例以及前人进行的相关水槽实验结果总结认为: 地形坡度、基准面下降速率及幅度与下切谷所侵蚀地层的岩性是影响下切谷发育模式的最主要因素。这些因素共同控制了: (1)下切谷的弯度指数及宽深比,(2)下切谷平面上发育密度及其规模,(3)与下切谷伴生的陆棚三角洲、陆棚边缘三角洲沉积厚度及展布范围。海侵过程中下切谷的沉积充填类型及岩性,受平均基准面上升速率及沉积物供应量的共同控制,根据沉积充填类型及岩性的不同可将其划分为富砂型陆棚三角洲充填及富泥型河口湾充填两类。     

Eocene-Pliocene time scale and stratigraphy of the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB)

We present a general stratigraphic synthesis for the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene times. The stratigraphic data were compiled both from literature and from research carried out by the authors during the past 6 years ; an index of the stratigraphically most important localitites is provided. We distinguish 14 geographical areas from the Helvetic domain in the South to the Hanau Basin in the North. For each geographical area, we give a synthesis of the biostratigraphy, lithofacies, and chronostratigraphic ranges. The relationships between this stratigraphic record and the global sea-level changes are generally disturbed by the geodynamic (e.g., subsidence) evolution of the basins. However, global sea-level changes probably affected the dynamic of transgression–regression in the URG (e.g., Middle Pechelbronn Beds and Serie Grise corresponding with sea-level rise between Ru1/Ru2 and Ru2/Ru3 sequences, respectively) as well as in the Molasse basin (regression of the UMM corresponding with the sea-level drop at the Ch1 sequence). The URGENT-project (Upper Rhine Graben evolution and neotectonics) provided an unique opportunity to carry out and present this synthesis. Discussions with scientists addressing sedimentology, tectonics, geophysics and geochemistry permitted the comparison of the sedimentary history and stratigraphy of the basin with processes controlling its geodynamic evolution. Data presented here back up the palaeogeographic reconstructions presented in a companion paper by the same authors (see Berger et al. in Int J Earth Sci 2005).     

东尼日尔Termit盆地叠置裂谷的演化:来自构造和沉积充填的制约

东尼日尔Termit盆地是中西非裂谷系中典型的中—新生代裂谷盆地。在充分应用钻井和地震解释资料的基础上,根据构造、沉积充填及主要区域性不整合面的特征,分析了该盆地的演化过程。盆地内主要发育两类断层,第一类断层形成于早白垩世,于古近纪发生继承性活动,第二类断层为形成于古近纪的新生断层。全盆地普遍存在4个主要区域性不整合面,分别位于下白垩统、上白垩统、古近系、新近系—第四系底部。下白垩统和古近系沉积特征受断层活动控制明显,上白垩统和新近系沉积中心位于盆地中部,在其沉积时构造活动较弱。构造和沉积充填特征表明,Termit盆地经历了白垩纪和古近纪—第四纪两期裂谷旋回叠置的演化过程。下白垩统和古近系沉积于同裂谷期,沉积充填受断层活动控制;上白垩统和新近系—第四系沉积于后裂谷期,以热沉降拗陷作用为主。     

Tertiary tectonics of the Dannemarie Basin, upper Rhine graben, and regional implications

Recently released seismic reflection data, together with previous seismic and well data, are used to describe the development of the Dannemarie basin, in the SW end of the Upper Rhine Graben. The Dannemarie Basin was formed during the main rifting phase of the Upper Rhine Graben as an asymmetrical graben trending NE–SW. Post-rift tectonism shifted the depocenter southward and changed the overall shape of the basin. Miocene Jura compression did not result in the formation of folds, as in the adjacent Mulhouse Horst. Strike slip faulting was dominant in the post-rift period and new faults were created, most notably the north trending and transpressional Belfort Fault. The boundary of the Dannemarie Basin with the Vosges Mountains is part of a restraining bend, which may account for the uplift of the southernmost part of the Vosges Mountains.     

二连盆地洪浩尔舒特凹陷下白垩统构造特征与沉积体系研究

在深入研究洪浩尔舒特凹陷大量岩芯、测井和地震资料的基础上，证实这一半地堑相似于北美东部裂谷，而不同于东非裂谷。同时发现边界断层各段位移量最小处为古河流入口地点，后者堆积横向的粗粒三角洲，使断陷被分割成若干次凹，导致构造和沉积的复杂化。断陷中，体系域发育受枢纽断层控制，LST主要分布于下降盘。在等时格架内，进行地震地层学-沉积相分析是掌握储层分布，揭示深部、隐蔽油藏的有力手段。最后判定该凹陷远景在于勘探LST的多种沉积体系。     

西藏珠穆朗玛峰北坡地区显生宙沉积演化

位于印度板块北缘和雅鲁藏布江结合带之间的珠穆朗玛峰北坡地区，属于喜马拉雅造山带，是特提斯洋的重要组成部分。自奥陶纪至古近纪约5亿年期间发育一套基本连续的海相沉积，厚度达14 km，是研究特提斯洋形成演化的最佳地区。作者在对该区显生宙地层主干剖面和辅助剖面详细观察研究以及区域地质调查填图的基础上，将珠穆朗玛峰北坡地区显生宙沉积地层划分为海相、海陆过渡相和陆相3个沉积相组、15个沉积相和若干个沉积亚相。作者通过对该区沉积盆地的地层系统、沉积相、沉积特征的系统研究，将珠穆朗玛峰北坡地区显生宙沉积演化划分为6个阶段:1)奥陶纪-泥盆纪为稳定陆表海演化阶段；2)石炭纪-二叠纪为大陆裂谷盆地演化阶段；3)三叠纪-侏罗纪为被动大陆边缘盆地演化阶段；4)早中白垩世为前陆早期复理石盆地演化阶段；5)晚白垩世-古新世为前陆晚期磨拉石盆地演化阶段；6)古近纪-第四纪为造山隆升断陷盆地形成演化阶段。研究结果表明，珠穆朗玛峰北坡地区显生宙沉积盆地经历了由陆表海盆地-大陆裂谷盆地-被动大陆边缘盆地-前陆盆地-断陷盆地的演化过程。