汶川地震引发高速远程滑坡运动机理数值模拟研究——以谢家店子滑坡为例

针对汶川地震引发的谢家店子滑坡,在现场调查分析的基础上,建立了二维离散元数值模拟模型,采用2D-Block软件对其进行了全过程的数值模拟研究,并通过对跟踪块体的深入分析,研究了相应地质体在不同阶段下的运动特征.模拟结果表明,谢家店子滑坡经历了剧动启程抛掷阶段、快速撞击飞行阶段、铲刮减速碎屑流阶段及堆积掩埋阶段.为了揭示地震引发高速滑坡的发生规律,分别研究了地震震级、斜坡地形和斜坡上岩块的尺寸对高速滑坡启动和运动过程的影响规律.地震震级对边坡的启动、变形、破坏和运动有很大的影响,地震震级越大,滑体启动的加速度和速度也就越大,从而易形成高速远程滑坡.斜坡体本身的地形地貌对滑体运动也有较大影响.在震级和岩石力学参数一定的条件下,斜坡上岩块的大小对其启动、变形和运动过程有一定影响,随着岩块的增大,滑体运动的每个阶段历时都在减小,但当岩体十分破碎时,滑体虽然能够运动,但是很难发生抛掷.将地震滑坡的启动机理概括为积累变形效应、振荡启程效应和振荡加速效应.     

基于地震信号反演滑坡动力学机制

以2003年千将坪滑坡事件为例，基于地震信号分析大型高速滑坡启动之后的滑体运动特性。通过国家地震台网采集因滑坡激发产生的地震信号，反演得到滑坡区域的受力-时间函数，再经由时频分析划分滑坡期间的子事件，进而推导滑体的运动参数并还原滑坡过程。结果显示，由地震信号反演所求得的滑床坡度、滑坡方向以及滑体位移等数值与现场勘踏所得数据相符；同时，通过对滑坡子事件的分析，可分辨出因对岸河堤阻挡而产生的部分滑体反倾过程，从而还原较完整的滑坡过程。     

降雨型滑坡高速运动与堆积特征模拟研究:以宁乡县王家湾滑坡为例

降雨型滑坡在强降雨条件下常突然发生，启动后运动速度大，破坏力强，对其运动与堆积过程的预测是滑坡危险性分析中的难题。以湖南省宁乡县２０１７年７月１日突发的王家湾滑坡为例，在现场调查的基础上，系统研究了滑坡诱发因素和高速运动机理，发现强降雨和孔隙水压力上升是王家湾滑坡的主要诱发因素，高速滑动主要由于滑坡处斜坡坡度陡、滑带抗剪强度快速损失所致。利用 Ｓｕｒｆｅｒ和 ＡｒｃＧＩＳ软件处理基础数据，建 立了 滑 坡 三维模型，并基于有限体积法采用 ＤＡＮ３Ｄ 软件模拟分析了王家湾滑坡整个运动过程，研究了滑坡启动后运动速度、滑移范围和堆积厚度，模拟结果与现场调查数据基本一致。      

汶川地震滑坡-碎屑流致灾距探讨

为了阐明地震滑坡的运动特性并对其进行致灾距的预测,基于遥感影像解译和野外调查数据,借助经验公式法,分析了汶川地震滑坡水平最大运移距离L与前后缘高差H之间的相关性,给出了经验公式;探讨了不同滑坡之间滑程的差异与异常。结果表明:若已知H,可用L=aH+b或L=aHb对总位移进行预测初探;将视摩擦系数H/L=0.45作为汶川地震高速远程型滑坡的上限较合适;滑坡体积、源区破裂面积与L呈正相关,与H/L呈负相关;地震滑坡易发生在山脊线平行于断裂带、垂直于地震波传播方向的山体两侧;崩塌型滑坡易发前后缘高差范围在10~100m之间,大型高速远程型滑坡易发前后缘高差大于200m;滑坡源区易发坡度分布在25°51°之间,滑床坡降变化范围为0~58°,高速远程型滑坡的滑床坡降主要在8°20°之间;分析认为滑程差异和异常是距离效应、能量传递与岩体挡板效应、滚动润滑与气垫效应、体积与破裂面积效应、地质因子、地形因子、颗粒级配与颗粒流效应等因素综合作用的结果,考虑上述因素有益于滑坡-碎屑流致灾距的预测分析。      

高速远程滑坡动力学研究进展

高速远程滑坡动力学机理研究一直是国际地质灾害领域长期关注的热点与前沿性科学。通过对已有研究成果的系统性梳理,对高速远程滑坡动力学研究现状进行了概略性述评,厘定了本文所讨论的高速远程滑坡的定义,阐述了高速远程滑坡的典型沉积学特征,并对国内外学者提出的最有影响、最有地质证据支持的高速滑坡远程运动机理——摩擦生热减阻、滑带液化减阻、动力破碎减阻、底部裹挟减阻、剪切振动减阻、动量传递远程进行了论述。在此基础上,分析与讨论了高速远程滑坡动力学研究的发展趋势,提出今后研究所面临的深层次科学问题,并提出未来应进一步重点研究的关键科学问题在于速率相依摩阻弱化机理、破碎渐进相变耗能机理、过程相依波动减阻机理等。     

陕西泾阳南塬多序次黄土滑坡演化特征及成灾模式

陕西泾阳南塬自１９７６年引水灌溉以来黄土滑坡频发,调查发现,塬边黄土滑坡表现出明显的多期次滑动 特点,且随着灌溉的持续,滑坡类型也在发生变化.以野外详细地质调查为基础,结合无人机航拍等技术手段,重 点研究了蒋刘滑坡和庙店滑坡２个具代表性的多序次黄土滑坡,依据滑坡的运动堆积特征将泾阳南塬黄土滑坡 划分为低λ挤推式、高λ堆积式和高λ滑出式黄土滑坡３种类型,并详细阐述其成灾模式.结果表明:低λ挤推 式黄土滑坡大多是在２０世纪８０年代大面积引水灌溉的基础上,黄土层底部长期浸水形成软弱基座从而产生的 较大规模的黄土滑坡,因剪出口多低于地表,滑坡高速运动推挤前缘阶地在地表形成波浪状地形,内部则形成复 杂的逆冲推覆等小型构造;高λ堆积式黄土滑坡大多为第一期滑坡后壁的浅表层滑动或崩塌,受第一期滑坡后缘 平台或凹陷的阻挡,具体积小、滑距短等特点;高λ滑出式黄土滑坡为近年来蒋刘村一带滑坡发展演化的主要类 型,受该区S５古土壤层形成的相对不透水底板影响显著,该类滑坡具有剪出口较高、高速远程运动、流动性显著 等特点,后两类滑坡可随着地下水文条件的改变而交替出现.      

兴仁“6·10”彭家洞高速滑坡运动特征与形成机理

2021年6月10日20时30分左右, 贵州省兴仁彭家洞发生高速滑坡, 滑坡体高速运动沿途铲刮坡面崩塌堆积体, 造成3人遇难, 18栋房屋损毁。通过对滑坡发生前后影像资料遥感解译、灾害发生现场详细的地质调查及室内综合分析等技术手段, 对彭家洞滑坡的特征进行了详细描述, 阐明了滑坡发生的运动特征与形成机理。研究表明: 斜坡地形"上陡-中缓-下陡"与岩土结构"上硬下软"是滑坡形成的内在因素, 人类工程活动、强降雨的饱水加载和下渗软化作用是滑坡形成的外在因素; 滑坡平面形态呈折线形, 根据运动特征和堆积结构将滑坡分为滑源区(Ⅰ)、铲刮-流通区(Ⅱ)、铲刮堆积区(Ⅲ)3个区; 滑坡是由危岩带形成、滑坡孕育及斜坡失稳3个阶段孕育形成的挤压-推移式高速滑坡。研究结果对贵州类似的斜坡地带及岩土结构区域开展防灾减灾工作具有较强的指导作用。      

不同布锚方式对锚索抗滑桩受力与变形影响的物理模型试验研究

锚索抗滑桩是滑坡的主要支护结构之一。目前, 软硬相间地层条件下锚索抗滑桩的受力与变形特征尚缺乏系统研究。以软硬相间地层为地质背景, 基于自主研发的柔性测斜仪和自动加载系统, 构建了锚索抗滑桩加固滑坡物理模型试验系统, 开展了锚索抗滑桩加固滑坡的物理模型试验, 揭示了推力不断增加过程中抗滑桩、锚索和滑体的变形与受力特征, 对比研究了布锚方式对桩-锚受力与变形的影响规律, 通过数值模拟的方法分析了软硬相间地层对锚索抗滑桩的影响机理, 并以双锚点抗滑桩为例进行了理论分析。研究结果表明: ①在滑坡-锚索抗滑桩体系中, 桩身各点位移和滑体深部位移均随桩身深度的增加而减小, 滑体后部位移速率大于中部, 且滑体位移速率大于桩身位移速率; ②单锚点抗滑桩的桩-锚推力分担比经历了4个阶段的变化, 趋于稳定时桩-锚推力分担比约为9∶1, 锚索拉力作用下桩身弯矩呈"S"型分布, 正负弯矩非对称; ③锚固角度越大, 锚索拉力的增速越大, 不同锚固角度对桩身内力值的影响主要体现在受荷段; ④多锚点抗滑桩结构的锚索分担更多的推力, 与单锚点抗滑桩相比, 双锚点与三锚点抗滑桩的最大桩身弯矩分别减小了22.41%和40.55%;⑤与均质地层相比, 软硬相间地层中软、硬岩交界面处基岩应力发生突变, 不同软岩厚度比和桩底是否嵌入硬岩, 均对锚索拉力和桩-岩之间的相互作用有不同程度的影响; 其次, 双锚点抗滑桩内力的理论值与试验结果较为接近。本研究成果可为软硬相间地层中锚索抗滑桩加固滑坡工程的优化设计提供依据。      

上硬下软地层中h型桩与滑坡相互作用机理模型试验研究

组合式抗滑桩是加固大型滑坡的有效防护措施, 但上硬下软等复合地层中h型抗滑桩的加固机理仍有待深入研究。基于一套自主研发的上硬下软地层滑坡-h型抗滑桩物理模型试验装置, 综合应力应变监测、激光测距仪、高速相机与粒子图像测速(PIV)技术研究了上硬下软地层滑坡中h型桩的位移、内力响应规律与滑体变形破坏特征, 揭示了上硬下软地层条件下h型桩与滑坡相互作用机理。研究结果表明, 在坡顶荷载逐渐增加的条件下, h型桩加固的上硬下软地层滑坡的演化阶段可划分为蠕变阶段、匀速变形阶段、加速变形阶段和破坏阶段4个阶段。受连系梁影响, 前排桩与后排桩桩顶位移较小, 应变最大值出现在靠近滑面深度处; 后排桩弯矩呈"S"型分布, 前排桩弯矩呈三角形分布, 负弯矩最大值位于连系梁下方20 cm处。随着硬岩体积分数(φ_β)增加, 桩顶位移逐渐减小, 前、后排桩最大弯矩值也逐渐减小, 但硬岩体积分数超过60%后最大弯矩值变化幅度较小。当φ_β=20%和40%时, 后排桩土压力总体呈抛物线形式; 当φ_β=60%和80%时, 土压力总体呈反"S"型, 且滑面附近出现第二个土压力峰值; 前排桩土压力分布形式均为抛物线型。试验结果可为组合式抗滑桩加固机理研究和设计提供理论支撑。      

基于滑面分区段力学模型的高速滑坡运动过程能量转化研究

高速滑坡具有运动速度快、波及范围广的灾害特征, 因此对滑坡启动、加速和静止整个运动过程进行研究很有必要。基于滑面力学特性将滑面分为弹性介质区和应变弱化区, 构建了高速滑坡二维力学模型, 提出了滑坡启动动能计算公式和滑坡运动过程的能量计算公式; 以千将坪滑坡为例, 采用启动动能计算公式得出滑坡的启动速度为2.35 m/s; 依据滑面形态将其运动轨迹划分为快速加速、平稳加速、平稳减速、急剧减速4个阶段, 进行运动过程分析, 得出滑坡最大速度为16.8 m/s, 以滑坡前缘高程所在平面为势能基准面, 分析不同能量与总能量占比的变化情况, 在滑坡的4个运动阶段中, 动能占比分别为9.1%, 25.6%, 15.1%, 0%;摩擦损耗能量占比分别为: 5.5%, 58.8%, 81.7%, 95.5%;势能占比分别为: 85.2%, 14.2%, 0%, 0%;其他阻力能耗占比分别为: 0.2%, 1.4%, 3.2%, 4.5%。研究结论对高速滑坡致灾机制和风险分析具有重要意义。      

基于物理模型试验的多层滑带堆积层滑坡—抗滑桩受力特征

研究抗滑桩的受力特征是进行抗滑桩设计工作的关键。我国三峡库区部分堆积层滑坡发育多层滑带,而目前抗滑桩的设计方法仅针对单层滑坡,因此,对多层滑带堆积层滑坡—抗滑桩受力特征的研究具有重要意义。基于三峡库区堆积层滑坡工程地质特征,开展了多层滑带堆积层滑坡物理试验模型,在滑坡的后缘施加推力来模拟滑坡演化过程,同时监测滑坡—抗滑桩体系的多场信息。试验结果表明,在多层滑带堆积层滑坡的演化过程中,桩身受力表现出了很好的规律性。根据坡表位移的变化趋势,将滑坡演化分为4个阶段,在此基础上对桩身受力进行分析。滑坡推力分布图式中出现了4个极大值,土体抗力分布图式中出现唯一最大值,该试验结果为抗滑桩的设计提供了一定的理论支持。      

Mechanism of colluvial landslide induction by rainfall and slope construction: A case study

The landslide hazards occurring in the complex geological genesis accumulation body are usually controlled by the coupling action of many internal and external factors. Therefore, this paper takes the dam-front Danbo accumulation body landslide of Yangfanggou hydropower station on the Yalong River as the geological prototype, and discusses the process and mechanism of slope stability degradation under the combined action of rainfall and slope construction. Based on the detailed understanding of the basic characteristics of the accumulation body, the development characteristics of the landslide and the construction situation of the slope engineering, the study conducted correlation analysis between rainfall and landslide displacement, the physical and mechanical tests of all types of rocksoil masses, and the numerical simulation testing of seepage field variation of the landslide section. It is found that the special slope structure and material composition of the old landslide accumulation layer on the upper part of the Danbo accumulation body are the internal factors for the occurrence of thrust loadinduced landslide, and the construction of the slope engineering not only creates free space conditions for sliding, but also provides channels for the infiltration of rainfall into the slope after confluence, which is an external factor that caused the mechanical properties of the sliding zone soil to gradually weaken from the trailing edge to the leading edge. The geomechanical model of such landslide is that the active section of the trailing edge produces the "source of force", the transition section of the middle section affects the occurrence of sliding, and the anti-sliding section of the leading edge controls the occurrence of landslide hazards. The results of this research provide not only a useful supplement to the theory of landslide formation mechanisms but also a scientific basis for guiding the prevention and control of similar hazards.     

On the initiation,movement and deposition of a large landslide in Maoxian County,China

At 5 am 24 th June 2017, a catastrophic landslide hit Xinmo Village, Maoxian County, Sichuan Province, China. The slide mass rushed down from an altitude of 3400 m and traveled 2700 m in a high velocity. The 13 million m~3 deposition buried the whole village and caused about 100 deaths. The source area of the landslide is located in a high steep slope, average slope angle is 40o and maximal angle is 65o. The strata are interbedded Triassic Zagunao Formation metamorphic sandstone and slate with the dip slope angle of 45°. Based on high-resolution satellite remote sensing image, UAV image, DEM data, and field investigation, failure mechanism, travel features, and deposit characteristics were analyzed. The results showed that this landslide was influenced by Songpinggou Fault zone. According to the topography before the failure, the landslide is located in the back scarp of an antecedent landslide induced by Diexi Earthquake in 1933. The bedding slope provided potential rupture surface. Historical seismic activities and long-term gravitational deformation caused rock mass accumulated damages. Weathering and precipitation weakened the rock mass and finally induced shearing and tension failure. A huge block detached from the top rock slope, pushed the past landslide deposits in the middle part, rushed out of the slope bottom in a high velocity and buried the Xinmo Village. The rapid movement entrained and brought the soil into the Songping Gully which recoiled with and bounced back from the opposite mountain.     

基于模型试验的动水驱动型顺层岩质滑坡启滑机制初探

动水驱动型顺层岩质滑坡数量多、灾害频发、危害大, 是滑坡地质灾害领域的研究重点, 但目前对于滑坡启滑机制的认识仍不充分, 滑坡的准确预报还面临巨大挑战。鉴于此, 以含软弱夹层的中倾角顺层岩质滑坡为研究对象, 通过构建理想的单层滑带滑坡物理模型, 开展了一系列动水作用下的滑坡模型试验研究。结果表明, 动水作用下顺层岩质滑坡从开始变形至失稳滑动需经历初始变形、缓慢变形、加速变形和失稳破坏4个阶段, 而各个阶段的演化特征与滑面粗糙度和倾角密切相关。滑面倾角越大或粗糙度越小, 滑坡体从开始变形至失稳滑动所需的时间则越短; 相应地, 坡体加速变形阶段越不明显, 滑坡破坏的突发性越强。滑带内的渗流冲蚀作用会使滑带土中的骨料流失, 导致其抗剪强度降低, 进而引发坡体滑动。与此同时, 上覆坡体的压剪作用以及变形演化过程亦将反过来影响冲蚀强度。基于滑带土黏聚力随水力梯度和冲蚀时间的变化关系, 提出了渗流驱动下滑带土黏聚力演化模型, 可较好地描述滑带土黏聚力的退化过程。滑面粗糙度的存在不仅显著影响了滑带的冲蚀劣化规律, 还改变了滑带不同区域的破坏模式。此外, 通过考虑滑面粗糙度对滑带不同区域破坏模式的影响, 开展了动水多效应关联分析, 建立了滑坡地质体力学分析模型, 实现了动水作用下顺层岩质滑坡动态稳定性的有效评估。本研究成果可为实际动水驱动型顺层岩质滑坡的预测和防治提供理论参考。      

Relationships between landslide types and topographic attributes in a loess catchment, China

Topographic attributes have been identified as the most important factor in controlling the initiation and distribution of shallow landslides triggered by rainfall.As a result,these landslides influence the evolution of local surface topography.In this research,an area of 2.6 km 2 loess catchment in the Huachi County was selected as the study area locating in the Chinese Loess Plateau.The landslides inventory and landslide types were mapped using global position system(GPS) and field mapping.The landslide inventory shows that these shallow landslides involve different movement types including slide,creep and fall.Meanwhile,main topographic attributes were generated based on a high resolution digital terrain model(5 m × 5 m),including aspect,slope shape,elevation,slope angle and contributing area.These maps were overlaid with the spatial distributions of total landslides and each type of landslides in a geographic information system(GIS),respectively,to assess their spatial frequency distributions and relative failure potentials related to these selected topographic attributes.The spatial analysis results revealed that there is a close relation between the topographic attributes of the postlandsliding local surface and the types of landslide movement.Meanwhile,the types of landslide movement have some obvious differences in local topographic attributes,which can influence the relative failure potential of different types of landslides.These results have practical significance to mitigate natural hazard and understandgeomorphologic process in thick loess area.     

Long-term kinematics and mechanism of a deep-seated slow-moving debris slide near Wudongde hydropower station in Southwest China

Long-term kinematic research of slowmoving debris slide is rare despite of the widespread global distribution of this kind. This paper presents a study of the kinematics and mechanism of the Jinpingzi debris slide located on the Jinsha river bank in southwest China. This debris slide is known to have a volume of 27×106 m3 in active state for at least one century. Field survey and geotechnical investigation were carried out to define the structure of the landslide. The physical and mechanical properties of the landslide materials were obtained by in-situ and laboratory tests. Additionally, surface and subsurface displacements, as well as groundwater level fluctuations, were monitored since 2005. Movement features, especially the response of the landslide movement to rainfall, were analysed. Relationships between resisting forces and driving forces were analysed by using the limit equilibrium method assuming rigid-plastic frictional slip. The results confirmed a viscous component in the long-termcontinuous movement resulting in the quasioverconsolidated state of the slip zone with higher strength parameters than some other types of slowmoving landslides. Both surface and subsurface displacements showed an advancing pattern by the straight outwardly inclined(rather than gently or reversely inclined) slip zone, which resulted in low resistance to the entire sliding mass. The average surface displacement rate from 2005 to 2016 was estimated to be 0.19~0.87 mm/d. Basal sliding on the silty clay seam accounted for most of the deformation with different degrees of internal deformation in different parts. Rainfall was the predominant factor affecting the kinematics of Jinpingzi landslide while the role of groundwater level, though positive, was not significant. The response of the groundwater level to rainfall infiltration was not apparent. Unlike some shallow slow-moving earth flows or mudslides, whose behaviors are directly related to the phreatic groundwater level, the mechanism for Jinpingzi landslide kinematics is more likely related to the changing weight of the sliding mass and thedownslope seepage pressure in the shallow soil mass resulting from rainfall events.     

The starting mechanism and movement process of the coseismic rockslide: A case study of the Laoyingyan rockslide induced by the “5.12” Wenchuan earthquake

The"5.12"Wenchuan earthquake in 2008 triggered a large number of co-seismic landslides.The rear boundary or cracks of co-seismic landslide are generally located at the steep free surface of thin or thick mountains.Dynamic process of this kind of landslides could be divided into two parts:the seismic dynamic response of the slope and the movement process of rock mass.Taking the Laoyingyan rockslide as an example,the amplification effect was studied by single-degree-of-freedom system analysis method.Besides,the dynamic process of landslide under seismic loading was simulated by the finite difference method(FDM)and discrete element method(DEM).The amplification coefficient of the rockslide to seismic wave is 1.25.The results show that the critical sliding surface of the Laoyingyan rockslide was formed at the 23 th seconds under the action of seismic wave.At the same time,tension failure occurred at the rear edge of the sliding mass and shear failure occurred at the front edge.The maximum displacement was 0.81 m and the initial velocity was 2.78 m/s.During the initiation process of the rockslide,the rock mass firstly broke down along the joints which are along the dip of the rock stratum,and then collapsed bodily along the secondary structural planes.In the process of movement,the maximum velocity of rock mass was 38.24 m/s.After that,the rock mass underwent multiple collisions,including contact,deceleration to 0 and speed recovery after rebound.Finally,due to the constant loss of energy,the rocks stopped and accumulated loosely at the foot of the slope.The longest distance of movement was about 494 m.Besides,the smaller the damping ratio,the farther the rock mass moved.Compared with the results without considering the amplification factor,the movement distance of landslide by considering the amplification factor was more accurate.The study of the Laoyingyan rockslide is helpful to strengthen our field identification of potential co-seismic rockslides.At the same time,understanding its movement and accumulation process can help us better predict the hazard scope of the co-seismic rockslides,and provide a reference for the design of treatment projects.     

关于高速滑坡的几个问题

高速滑坡问题是当前工程地质和环境地质学界极为关注的问题。本文对诸如滑体高速滑动所对应的时空界限、滑体滑动过程所产生的热效应以及空气浮托力等高速滑坡产生机制问题进行了初步探讨。