Early Triassic intertidal/subtidal patterns of sedimentation along the southern margins of the Tethyan seaway,Jordan

The early Triassic Dardur Formation, exposed along the northeastern margin of the Dead Sea area, comprises some 63 m of siliciclastic and carbonate rocks, arranged in two coarsening-upward sequences. Each sequence begins with a heterolithic facies (silty shale dolomite and marlstone) and terminates with a sandstone facies.The occurrence of mixed carbonate-dominated clastic coarsening-upward facies sequences, containing pelecypode and ostracode fossils and trace fossils is attributed to deposition in a tidally-dominated environment. Bedload traction transport was responsible for deposition of the sandstone facies in a permanently submerged, shallow subtidal zone, whereas the presence of small scale interference oscillation ripple marks, tidal rhythmites and mudcracks in the heterolithic facies indicate deposition under more fluctuating intertidal conditions.The organization of heterolithic and sandstone into vertically-stacked, coarsening-upward marine facies sequences is attributed to a deepening-upward trend from intertidal to subtidal conditions, in response to a series of minor local transgressions and regressions along the southern margins of the Tethyan seaway during early Triassic times.     

Interplay between tectonics and compaction in a rift‐margin,lacustrine delta system: Miocene of the Eger Graben,Czech Republic

The Early Miocene Bílina Palaeodelta consists of fluvio‐deltaic and lacustrine clastics deposited along the south‐eastern margin of the extensional Most Basin, part of the Eger Graben in north Bohemia (Czech Republic). The Bílina succession shows evidence of repeated advances of an axial deltaic system across a thick accumulation of organic material and clay in the hangingwall of an active fault. Exposures up to ca 4·5 km long in the Bílina open‐cast mine help bridge the gap between seismic scale and typical outcrop scale of observation and thus allow the relationships between small‐scale and basin‐scale stratal geometries to be evaluated. The Bílina Palaeodelta deposits include sand‐dominated, fluvial channel fills and heterolithic sheets interpreted as delta plain strata, sand‐dominated mouth‐bar wedges and heterolithic sheets of prodeltaic deposits, passing distally into lacustrine clays. The depositional environment is interpreted as a fluvial‐dominated, mixed‐load, lacustrine delta with a high degree of grain‐size segregation at the feeder‐channel mouths. On the largest temporal and spatial scales, variable tectonic subsidence controlled the overall advance and retreat of the delta system. The medium‐term transgressive‐regressive history was probably driven by episodes of increased subsidence rate. However, at this temporal scale, the architecture of the deltaic sequences (deltaic lobes and correlative lacustrine deposits) was strongly affected by: (i) compaction of underlying peat and clay which drove lateral offset stacking of medium‐term sequences; and (ii) growth of a fault‐propagation fold close to the active Bílina Fault. At the smallest scale, the geometries of individual mouth bars and groups of mouth bars (short‐term sequences) reflect the interaction among sediment loading, compaction and growth faulting that produced high‐frequency relative lake‐level fluctuations and created local accommodation at the delta front.     

Gravel-topped offshore bar sequences in the Lower Carboniferous of southern Ireland

Within the Kinsale Formation (Lower Carboniferous) of southern Ireland are pebbly sandstones and conglomerates contained in what is known locally as the Garryvoe conglomerate facies. In this facies there are three main groups of lithologies: (a) heterolithic mudrocks and sandstones characterized by a wide variety of wave-produced structures; (b) sandstones dominated by swaley cross-stratification (SCS), parallel lamination, and rare hummocky cross-stratification (HCS); and (c) pebbly sandstones and conglomerates occurring as discrete beds or as gravel clasts dispersed through SCS sets. Successions of the facies comprise units of heterolithic mudrock and rippled sandstone alternating repeatedly with coarsening-upward units of SCS pebbly sandstone capped by top-surface granule and pebble lags. The Garryvoe conglomerate facies accumulated in a system of offshore bars on a muddy shallow-marine shelf that was dominated by waves and currents generated by storms. Sands and gravels were bypassed from a contemporaneous northerly coastal zone to the shelf, where they were moulded by the storm-generated flow into low, broad, sand ridges (offshore bars). The elongate bars were spaced kilometres apart, oriented obliquely to the coast, and separated by muddy interbar troughs. Their surfaces were largely covered by hummocky and swaley forms. Long-term, gradual seaward migration of the offshore bars concentrated gravels on landward flanks from the dispersed pebbly sands that were on the crests and seaward flanks. Exceptionally intense storms could form laterally extensive winnowed gravel lags above thinned bar sequences. Such storms could also flush gravel-bearing turbidity currents into muddy interbar trough areas.     

Cyclicity in the nearshore marine to coastal, Lower Permian, Pebbley Beach Formation, southern Sydney Basin, Australia: a record of relative sea-level fluctuations at the close of the Late Palaeozoic Gondwanan ice age

The Lower Permian (Artinskian to Sakmarian) Pebbley Beach Formation (PBF) of the southernmost Sydney Basin in New South Wales, Australia, records sediment accumulation in shallow marine to coastal environments at the close of the Late Palaeozoic Gondwanan ice age. This paper presents a sequence stratigraphic re‐evaluation of the upper half of the unit based on the integration of sedimentology and ichnology. Ten facies are recognized, separated into two facies associations. Facies Association A (seven facies) comprises variably bioturbated siltstones and sandstones with marine body fossils, interpreted as recording sediment accumulation in open marine environments ranging from lower offshore to middle shoreface water depths. Evidence of deltaic influence is seen in several Association A facies. Facies Association B (three facies) comprises mainly heterolithic, interlaminated and thinly interbedded sandstone and siltstone with some thicker intervals of dark grey, organic‐rich mudstone, some units clearly filling incised channel forms. These facies are interpreted as the deposits of estuarine channels and basins. Throughout the upper half of the formation, erosion surfaces with several metres relief abruptly separate open marine facies of Association A (below) from estuarine facies of Association B (above). Vertical facies changes imply significant basinward shift of environment across these surfaces, and lowering of relative sea level in the order of 50 m. These surfaces can be traced over several kilometres along depositional strike, and are defined as sequence boundaries. On this basis, at least nine sequences have been recognized in the upper half of the formation, each of which is < 10 m thick, condensed, incomplete and top‐truncated. Sequences contain little if any record of the lowstand systems tract, a more substantial transgressive systems tract and a highstand systems tract that is erosionally truncated (or in some cases, missing). This distinctive stacking pattern (which suggests a dominance of retrogradation and progradation over aggradation) and the implied relative sea‐level drop across sequence boundaries of tens of metres are remarkably similar to some other studies of continental margin successions formed under the Neogene icehouse climatic regime. Accordingly, it is suggested that the stratigraphic architecture of the PBF was a result of an Icehouse climate regime characterized by repeated, high‐amplitude cycles of relative sea‐level change.     

The Mackenzie Delta: sedimentary processes and facies of a high-latitude, fine-grained delta

The Mackenzie Delta is a large fine‐grained delta deposited in a cold arctic setting. The delta has been constructed upon a flooding surface developed on a previous shelf‐phase delta. There are three principal depositional zones: the subaerial delta plain, the distributary channel mouth region and the subaqeous delta. The subaerial delta plain is characterized by an anastomosing system of high‐sinuosity channels and extensive thermokarst lake development. This region is greatly influenced by the annual cycle of seasonal processes including winter freezing of sediments and channels, ice‐jamming and flooding in the early spring and declining river stage during the summer and autumn. Deposition occurs on channel levees and in thermokarst lakes during flood events and is commonly rhythmic in nature with discrete annual beds being distinguishable. In the channel mouth environment, deposition is dominated by landward accretion and aggradation of mouth bars during river‐ and storm surge‐induced flood events. The subaqeous delta is characterized by a shallow water platform and a gentle offshore slope. Sediment bypassing of the shallow‐water platform is efficient as a result of the presence of incised submarine channels and the predominance of suspension transport of fine‐grained sediments. Facies of the shallow platform include silty sand with climbing ripple lamination. Offshore facies are dominated by seaward‐fining fine sand to silt tempestites. Sea‐ice scouring and sediment deformation are common beyond 10 m water depth where bioturbated muds are the predominant facies. The low angle profile of the shallow‐water platform is interpreted to be the combined response of a fine‐grained delta to (1) storm sediment dispersal; (2) autoretreat as a result of the increasing subaerial and subaqeous area of deposition as the delta progrades out of its glacial valley; (3) limited water depth above the underlying flooding surface; and (4) efficient nearshore bypassing of sediment through subice channels at the peak of spring discharge. Several indicators of the cold climate can be used as criteria for the interpretation of ancient successions, including thermokarst lake development, submarine channel scours, freeze–thaw deformation and ice‐scour deformation structures. Permafrost inhibits compaction subsidence and, together with the shallow‐water setting, also limits autocyclic lobe switching. The cold climate can thus influence stratal architecture by favouring the development of regional‐scale clinoform sets rather than multiple, smaller scale lobes separated by autocyclic flooding surfaces.     

陕甘宁盆地陇东地区长8油组厚层非均质砂体的沉积学解剖

通过对延长统长8段厚层砂岩沉积岩石学和层序地层学研究,将其分为两类,一类是由多期单一成因的分流河道砂岩叠加构成;另一类是由三角洲前缘的水下分流河道、河口坝、坝顶席状砂和滑塌砂等多种沉积微相以不同的组合形式叠加构成。首次提出在“高可容纳空间,高沉积通量”背景下,只有经过特殊水动力条件(淘洗)改造后形成的被我们称之为坝顶席状砂的砂岩才有可能成为相对高孔、高渗的优质储层。     

The Maesan fan delta, Miocene Pohang Basin, SE Korea: architecture and depositional processes of a high-gradient fan-delta-fed slope system

The Maesan fan-delta-fed slope system in the Miocene Pohang Basin occurs between two Gilbert-type fan deltas. Detailed analysis of sedimentary facies and bed geometry reveals that the sequence is represented by 13 sedimentary facies. These facies can be organized into three facies associations, representing distinct depositional environments: alluvial fan (facies association I), steep-faced slope (facies association II), and basin plain (facies association III). Subaerial debris flows and dense, inertia-dominated currents were transformed into subaqueous sediment gravity flows in steep-faced slope environments. Further downslope, these flows were channelized and formed lobate conglomerate and sandstone bodies at the terminal edge of the channels (or chutes). Interchannel and interlobe areas were dominated by homogeneous mudstone and muddy sandstone, deposited by suspension settling of fine-grained materials. Part of the steep-faced slope deposits experienced large-scale slides and slumps. The chutes/channels, lobes and splays on the steep-faced slope of the Maesan system are similar to those in modern subaqueous coarse-grained fan-delta systems.     

Architecture of a tide-influenced river delta in the Frontier Formation of central Wyoming, USA

The Frewens sandstone is composed of two elongate tide-influenced sandstone bodies that are positioned directly above and slightly landward of a more wave-influenced lobate sandstone. The 20-km-long, 3-km-wide Frewens sandstone bodies coarsen upwards and fine away from their axes, have gradational bases and margins and have eroded tops abruptly overlain by marine shales. These sandstones are superbly exposed in large cliffs on the banks of the South Fork of the Powder River in central Wyoming, USA. The deposits change upwards from thinly interbedded sandstones and mudstones to metre-thick heterolithic cross-strata and, finally, to metres-thick sandstone-dominated cross-strata. There is abundant evidence for tidal modulation of depositional flows; however, palaeocurrents were strongly ebb-dominated and nearly parallel the trend of sandstone-body elongation. Detailed mapping of stratal geometry and facies across these exposures shows a complex internal architecture. Large-scale bedding units within sandstone bodies are defined by alternations in facies, bed thickness and the abundance of shales. Such bedsets are inclined (5°–15°) in walls oriented parallel to palaeoflow and gradually decrease in dip over hundreds of metres as they extend from the sandstone-dominated deposits higher in a sandstone body to muddier deposits lower in the body. Where viewed perpendicular to palaeoflow, bedsets are 100-metre-wide lenses that shingle off the sandstone-body axis towards its margins. The sandstone bodies are interpreted as sand ridge deposits formed on the shoreface of a tide-influenced river delta. Metres-thick cross-strata in the upper parts of sandstone bodies resemble deposits of bars (sandwaves) formed where tidal currents moved across shallows and the tops of tidal ridges. Heterolithic deposits lower in sandstone bodies record fluctuating currents caused by ebb and flood tides and varying river discharge. Erosion surfaces capping sandstone bodies record tidal ravinement. The tidal ridges were abandoned following transgression and covered with marine mud as waters deepened.     

Architecture of coastal and alluvial deposits in an extensional basin: the Carboniferous Joggins Formation of eastern Canada

Abstract The Joggins Formation was deposited in the Cumberland Basin, which experienced rapid mid‐Carboniferous subsidence on bounding faults. A 600 m measured section of coastal and alluvial plain strata comprises cycles tens to hundreds of metres thick. The cycles commence with coal and fossiliferous limestone/siltstone intervals, interpreted as widespread flooding events. These intervals are overlain by coarsening‐upward successions capped by planar‐based sandstone mounds, up to 100 m in width that represent the progradation of small, river‐generated delta lobes into a standing body of open water developed during transgression. The overlying strata contain sand‐rich heterolithic packages, 1–8 m thick, that are associated with channel bodies 2–3 m thick and 10–50 m wide. Drifted plant debris, Calamites groves and erect lycopsid trees are preserved within these predominantly green‐grey heterolithic sediments, which were deposited on a coastal wetland or deltaic plain traversed by channel systems. The cycles conclude with red siltstones, containing calcareous nodules, that are interbedded with thin sandstones and associated with both single‐storey channel bodies (1–1·5 m thick and 2–3 m wide) and larger, multistorey channels (3–6 m thick) with incised margins. Numerous channel bodies at the same level suggest that multiple‐channel, anastomosed river systems were developed on a well‐drained floodplain. Many minor flooding surfaces divide the strata into parasequences with dominantly progradational and aggradational stacking patterns. Multistorey channel bodies are relatively thin, fine grained and modestly incised, and palaeosols are immature and cumulative. The abundance and prominence of flooding surfaces suggests that base‐level rise was enhanced, whereas the lack of evidence for abrupt basinward stepping of facies belts, coupled with the absence of strong fluvial incision and mature palaeosols, suggests that base‐level fall was suppressed. These architectural features are considered to reflect a tectonic architectural signature, in accordance with the high‐subsidence basinal setting. Evidence for restricted marine influence and variation in floral assemblages suggests modulation by eustatic and climatic effects, although their relative importance is uncertain.     

Facies model of a fine‐grained,tide‐dominated delta: Lower Dir Abu Lifa Member (Eocene), Western Desert,Egypt

Existing facies models of tide‐dominated deltas largely omit fine‐grained, mud‐rich successions. Sedimentary facies and sequence stratigraphic analysis of the exceptionally well‐preserved Late Eocene Dir Abu Lifa Member (Western Desert, Egypt) aims to bridge this gap. The succession was deposited in a structurally controlled, shallow, macrotidal embayment and deposition was supplemented by fluvial processes but lacked wave influence. The succession contains two stacked, progradational parasequence sets bounded by regionally extensive flooding surfaces. Within this succession two main genetic elements are identified: non‐channelized tidal bars and tidal channels. Non‐channelized tidal bars comprise coarsening‐upward sandbodies, including large, downcurrent‐dipping accretion surfaces, sometimes capped by palaeosols indicating emergence. Tidal channels are preserved as single‐storey and multilateral bodies filled by: (i) laterally migrating, elongate tidal bars (inclined heterolithic strata, 5 to 25 m thick); (ii) forward‐facing lobate bars (sigmoidal heterolithic strata, up to 10 m thick); (iii) side bars displaying oblique to vertical accretion (4 to 7 m thick); or (iv) vertically‐accreting mud (1 to 4 m thick). Palaeocurrent data show that channels were swept by bidirectional tidal currents and typically were mutually evasive. Along‐strike variability defines a similar large‐scale architecture in both parasequence sets: a deeply scoured channel belt characterized by widespread inclined heterolithic strata is eroded from the parasequence‐set top, and flanked by stacked, non‐channelized tidal bars and smaller channelized bodies. The tide‐dominated delta is characterized by: (i) the regressive stratigraphic context; (ii) net‐progradational stratigraphic architecture within the succession; (iii) the absence of upward deepening trends and tidal ravinement surfaces; and (iv) architectural relations that demonstrate contemporaneous tidal distributary channel infill and tidal bar accretion at the delta front. The detailed facies analysis of this fine‐grained, tide‐dominated deltaic succession expands the range of depositional models available for the evaluation of ancient tidal successions, which are currently biased towards transgressive, valley‐confined estuarine and coarser grained deltaic depositional systems.     

Facies architecture of a submarine fan channel–levee complex: the Juniper Ridge Conglomerate, Coalinga, California

The Upper Cretaceous Juniper Ridge Conglomerate (JRC) near Coalinga, California, provides a rare, high-quality exposure of a submarine channel to overbank transition. The facies architecture of the JRC comprises a thick, predominantly mudstone sequence overlain by a channellized conglomerate package. Conglomeratic bounding surfaces truncate successions of interbedded turbiditic sandstones and mudstones both vertically and laterally. Thick-bedded, massive sandstones are interbedded with conglomerates. Facies architecture, palaeocurrent indicators, slump features, sandstone percentages and sandstone bed thickness trends lead to the interpretation that these elements comprise channel and overbank facies. A vertical sequence with conglomerate at the base, followed by thick-bedded sandstone, and capped by interbedded turbiditic sandstone and mudstone form a fining-upward lithofacies association that is interpreted as a single channel-fill/overbank system. Three similar lithofacies associations can be related to autocyclic processes of thalweg migration and submarine fan aggradation or to allocyclically driven changes in sediment calibre.     

胜坨油田一区沙河街组二段1—3砂组测井-沉积相分析

本文在建立取芯井段岩-电转换关系及测井相-沉积相解释模型的基础上,对沙二段1—3砂组进行了详细的沉积相分析。确定其主要为辫状河三角洲沉积体系的水上平原沉积,次为三角洲前缘沉积;识别出三角洲平原、三角洲前缘和前三角洲3个亚相及分流河道河床、心滩、边滩等11个微相类型;并对各微相类型的沉积特征和剖面结构进行了讨论。     

白云凹陷北坡珠江组陆架边缘三角洲前缘砂体储层特征及控制因素

采用铸体薄片、岩石薄片、扫描电镜和压汞实验、物性分析等测试资料,对珠江口盆地白云凹陷北坡珠江组陆架边缘三角洲前缘砂体储层特征及控制因素进行研究。结果表明,该储层主要为灰色中细粒岩屑砂岩,成分成熟度、结构成熟度均较低。储集空间以次生孔隙为主,其次为剩余原生粒间孔、原生孔隙等。储层具有排驱压力较高、配位数较高、孔喉半径小和孔喉分选性较差的孔隙结构特点,为中-低孔、中-低渗型储层。储层发育受沉积相和成岩作用的复合控制,水下分流河道砂体储集物性明显优于其它微相砂体。成岩作用过程主导储层物性变化,砂岩储集体中的原生储集空间因机械压实作用、胶结作用而大幅降低,后期溶蚀作用产生较多的次生储集空间,尤其是长石的溶蚀极大改善了本区储层物性,导致储集体中溶蚀性次生孔隙为主要的储存空间。     

Recognition and significance of sharp‐based mouth‐bar deposits in the Eocene Green River Formation,Uinta Basin,Utah

Sandstone bodies in the Sunnyside Delta Interval of the Eocene Green River Formation, Uinta Basin, previously considered as point bars formed in meandering rivers and other types of fluvial bars, are herein interpreted as delta mouth‐bar deposits. The sandstone bodies have been examined in a 2300 m long cliff section along the Argyle and Nine Mile Canyons at the southern margin of the Uinta lake basin. The sandstone bodies occur in three stratigraphic intervals, separated by lacustrine mudstone and limestone. Together these stratigraphic intervals form a regressive‐transgressive sequence. Individual sandstone bodies are texturally sharp‐based towards mudstone substratum. In proximal parts, the mouth‐bar deposits only contain sandstone, whereas in frontal and lateral positions mudstone drapes separate mouth‐bar clinothems. The clinothems pass gradually into greenish‐grey lacustrine mudstone at their toes. Horizontally bedded or laminated lacustrine mudstone onlaps the convex‐upward sandstone bars. The mouth‐bar deposits are connected to terminal distributary channel deposits. Together, these mouth‐bar/channel sandstone bodies accumulated from unidirectional jet flow during three stages of delta advance, separated by lacustrine flooding intervals. Key criteria to distinguish the mouth‐bar deposits from fluvial point bar deposits are: (i) geometry; (ii) bounding contacts; (iii) internal structure; (iv) palaeocurrent orientations; and (v) the genetic association of the deposits with lacustrine mudstone and limestone.     

Shallow marine sand bar sequences: an example from the late Precambrian of North Norway

Five coarsening upward shallow marine sandstone sequences (2–10 m thick), are described from the late Precambrian of North Norway, where they occur in a laterally continuous and tectonically undeformed outcrop. The sequences consist of five facies with distinct assemblages of sedimentary structures and palaeocurrent patterns. Each facies is the product of alternate phases of sedimentation during relatively high- and low-energy periods. Facies 1 to 4 are interpreted as representing prograding, subtidal sand bars. Sand bar progradation occurred during the highest energy periods when unidirectional currents flowed to the northwest, depositing trough cross-bedded sandstones (facies 3 and 4) on the bar crests and flanks, and sheet sandstone beds (facies 1 and 2) in the offshore environments. Weaker northwesterly flowing currents continued during moderate energy fair weather periods. Low energy fair weather periods were dominated by wave processes, which formed largescale, low-angle, westerly inclined surfaces on the bar flanks (facies 4) and wave rippled sandstone beds (facies 2) and flat laminated siltstone layers (facies 1) in the offshore environments. One sand bar was dissected by channels and infilled by tabular cross-bedded sandstones (facies 5). Bipolar palaeocurrent evidence, with two modes separated into two laterally equivalent channel systems, suggests deposition by tidal currents in mutually evasive ebb and flood channels. The inferred processes of these sand bars are compared with those associated with modern storm-generated and tidal current generated linear sand ridges. Both are influenced by the interaction of relatively low and high energy conditions. The presence of the tidal channel facies, however, combined with the inferred strong bottom current regime, is more analogous to a tidal current hydraulic regime.     

Depositional environment and tectono-provenance of Upper Kaimur Group sandstones,Son Valley,Central India

The Mesoproterozoic Upper Kaimur Group consists of Bijaigarh Shale, Scarp Sandstone, and Dhandraul Sandstone. Based on the lithofacies data set, two major facies associations were identified, namely—tidal sand flat/sand bar facies association (TSFA) and tidally influenced fluvial channel facies/tidal channel facies association (TIFCFA). The Dhandraul Sandstone has been interpreted as a product of TIFCFA and the underlying Scarp Sandstone in TSFA which endorses a tidal dominated estuarine setting. Detrital modes of the Dhandraul and Scarp Sandstones fall in the quartz arenite to sub-litharenite types. Petrographical data suggest that the deposition of the Upper Kaimur Group sandstones took place in humid climate and was derived from mixed provenances. The sandstone composition suggests detritus from igneous rocks, metamorphic rocks, and recycled sedimentary rocks. The sandstone tectonic discrimination diagrams suggest that the provenances of the Upper Kaimur Group sandstones were continental block, recycled orogen, rifted continental margin to quartzose recycled tectonic regimes. It is envisaged that the Paleo- and Mesoproterozoic granite, granodiorite, gneiss, and metasedimentary rocks of Mahakoshal Group and Chotanagpur granite–gneiss present in the western and northwestern direction are the possible source rocks for the Upper Kaimur Group in the Son Valley.     

珠江口盆地陆丰凹陷珠江组沉积相带与储层特征

陆丰凹陷珠江组发育的多套砂岩储层是珠江口盆地东部重要的产油层,但对这些储层沉积特征的研究程度不足制约了下一步的勘探部署。在岩心观察的基础上,结合测井资料、岩石学特征、矿物成分、沉积构造等对珠江组砂体储层沉积相类型和物性特征进行了分析。结果表明,研究区主要发育辫状河三角洲和滨岸两大沉积体系,并可进一步细分为分流河道、河口坝、远沙坝等10种沉积微相。不同的沉积相带控制不同砂体储集物性,按储层物性好坏,划分出3类沉积相带砂体储层。滩砂、滩砂水道、沿岸坝等砂体储层物性最好,上临滨、分流河道、河口沙坝次之,下临滨砂体最差。综合研究认为,寻找优质油气储层,应优先考虑最有利的形成优质储层的沉积相带。     

鄂尔多斯盆地东北部下石盒子组盒8段辫状河三角洲沉积特征

中二叠统下石盒子组盒8段为鄂尔多斯盆地东北部天然气的主产层位,其储集砂体受控于沉积相带的展布。通过对野外露头、岩心及测井曲线等综合分析,笔者认为研究区内主要以发育辫状河三角洲为特征,并对其沉积特征、影响其形成和发育的机理,以及岩相和砂体的展布特征进行深入研究。认为该区盒8段三角洲为辫状河-浅水型湖泊三角洲,在三角洲平原相区储集砂体为分流河道沉积;而在三角洲前缘相区则为水下分流河道沉积,河口坝、席状砂及远砂坝等沉积微相不发育。