Minibasin depocentre migration during diachronous salt welding,offshore Angola

Salt tectonics is an important part of the geological evolution of many continental margins, yet the four-dimensional evolution of the minibasins, the fundamental building block of these and many other salt basins, remains poorly understood. Using high-quality 3D seismic data from the Lower Congo Basin, offshore Angola we document the long-term (>70 Myr) dynamics of minibasin subsidence. We show that, during the Albian, a broadly tabular layer of carbonate was deposited prior to substantial salt flow, diapirism, and minibasin formation. We identify four subsequent stages of salt-tectonics and related minibasin evolution: (i) thin-skinned extension (Cenomanian to Coniacian) driven by basinward tilting of the salt layer, resulting in the formation of low-displacement normal faults and related salt rollers. During this stage, local salt welding led to the along-strike migration of fault-bound depocentres; (ii) salt welding below the eastern part of the minibasin (Santonian to Paleocene), causing a westward shift in depocentre location; (iii) welding below the minibasin centre (Eocene to Oligocene), resulting in the formation of a turtle and an abrupt shift of depocentres towards the flanks of the bounding salt walls; and (iv) an eastward shift in depocentre location due to regional tilting, contraction, and diapir squeezing (Miocene to Holocene). Our study shows that salt welding and subsequent contraction are key controls on minibasin geometry, subsidence and stratigraphic patterns. In particular, we show how salt welding is a protracted process, spanning > 70 Myr of the salt-tectonic history of this, and likely other salt-rich basins. The progressive migration of minibasin depocentres, and the associated stratigraphic architecture, record weld dynamics. Our study has implications for the tectono-stratigraphic evolution of minibasins.     

Spatial and temporal variations in minibasin geometry and evolution in salt tectonic provinces: Lower Congo Basin,offshore Angola

In passive margin salt basins, the distinct kinematic domains of thin‐skinned extension, translation and contraction exert important controls on minibasin evolution. However, the relationship between various salt minibasin geometries and kinematic domain evolution is not clear. In this study, we use a semi‐regional 3D seismic reflection dataset from the Lower Congo Basin, offshore Angola, to investigate the evolution of a network of minibasins and intervening salt walls during thin‐skinned, gravity‐driven salt flow. Widespread thin‐skinned extension occurred during the Cenomanian to Coniacian, accommodated by numerous distributed normal faults that are typically 5–10 km long and spaced 1–4 km across strike within the supra‐salt cover. Subsequently, during the Santonian–Paleocene, multiple, 10–25 km long, 5–7 km wide depocentres progressively grew and linked along strike to form elongate minibasins separated by salt walls of comparable lengths. Simultaneous with the development of the minibasins, thin‐skinned contractional deformation occurred in the southwestern downslope part of the study area, forming folds and thrusts that are up to 20 km long and have a wavelength of 2–4 km. The elongate minibasins evolved into turtle structures during the Eocene to Oligocene. From the Miocene onwards, contraction of the supra‐salt cover caused squeezing and uplift of the salt walls, further confining the minibasin depocentres. We find kinematic domains of extension, translation and contraction control the minibasin initiation and subsequent evolution. However, we also observe variations in minibasin geometries associated with along‐strike growth and linkage of depocentres. Neighbouring minibasins may have different subsidence rates and maturity leading to marked variations in their geometry. Additionally, migration of the contractional domain upslope and multiple phases of thin‐skinned salt tectonics further complicates the spatial variations in minibasin geometry and evolution. This study suggests that minibasin growth is more variable and complex than existing domain‐controlled models would suggest.     

Influence of minibasin obstruction on canopy dynamics in the northern Gulf of Mexico

In salt‐detached gravity‐gliding/spreading systems the detachment geometry is a key control on the downslope mobility of the supra‐salt sequence. Here, we used regional 3D seismic data to examine a salt‐stock canopy in the northern Gulf of Mexico slope, in an area where supra‐canopy minibasins subsided vertically and translated downslope above a complex base‐of‐salt. If thick enough, minibasins can interact with, and weld to, the base‐of‐salt and be obstructed from translating downslope. Based on the regional maps of the base of allochthonous salt and the base of the supra‐canopy sequence, the key controls on minibasin obstruction, we distinguished two structural domains in the study area: a highly obstructed domain and a highly mobile domain. Large‐scale translation of the supra‐canopy sequence is recorded in the mobile domain by a far‐travelled minibasin and a ramp syncline basin. These two structures suggest downslope translation on the order of 40 km from Plio‐Pleistocene to Present. In contrast, translation was impeded in the obstructed domain due to supra‐canopy bucket minibasins subsiding into feeders during the Pleistocene. As a result, we infer that differential translation occurred between the two domains and argue that a deformation area between two differentially translating supra‐canopy minibasin domains is difficult to recognize. However, characterizing domains according to base‐of‐salt geometry and supra‐canopy minibasin configuration can be helpful in identifying domains that may share similar subsidence and downslope translation histories.     

Obstructed minibasins on a salt-detached slope: An example from above the Sigsbee canopy,northern Gulf of Mexico

Salt-detached gravity gliding/spreading systems having a rugose base-of-salt display complex strain patterns. However, little was previously known about how welding of supra-salt minibasins to the sub-salt may influence both the downslope translation of minibasins on salt-detached slopes and the regional pattern of supra-salt strain. Using a regional 3D seismic reflection data set, we examine a large salt-stock canopy system with a rugose base on the northern Gulf of Mexico slope, on which minibasins both subside and translate downslope. Some minibasins are welded at their bases and others are not. We suggest that basal welds obstruct downslope translation of minibasins and control regional patterns of supra-canopy strain. The distribution of strain above the canopy is complex and variable. Each minibasin that becomes obstructed modifies the local strain field, typically developing a zone of shortening immediately updip and an extensional breakaway zone immediately downdip of the obstructed minibasin. This finding is corroborated by observations from a physical sandbox model of minibasin obstruction. We also find in our natural example that minibasins can be obstructed to different degrees, ranging from severe (e.g., caught in a feeder) to mild (e.g., welded to a flat or gently dipping base-of-salt). By mapping both the presence of obstructed minibasins and the relative degree of minibasin obstruction, we provide an explanation for the origin of complex 3-D strain fields on a salt-detached slope and, potentially, a mechanism that explains differential downslope translation of minibasins. In minibasin-rich salt-detached slope settings, our results may aid: i) structural restorations and regional strain analyses; ii) prediction of subsalt relief in areas of poor seismic imaging; and iii) prediction of stress fields and borehole stability. Our example is detached on allochthonous salt and where the base-of-salt is rugose, with the findings applicable to other such systems worldwide (e.g., Gulf of Mexico; Scotian Margin, offshore eastern Canada). However, our findings are also applicable to systems where the salt is autochthonous but has significant local basal relief (e.g., Santos Basin, Brazil; Kwanza Basin, Angola).     

Evolution of salt structures in the northern Paradox Basin: controls on evaporite deposition,salt wall growth and supra‐salt stratigraphic architecture

The northern Paradox Basin evolved during the Late Pennsylvanian–Permian as an immobile foreland basin, the result of flexural subsidence in the footwall of the growing Uncompahgre Ancestral Rocky Mountain thick‐skinned uplift. During the Atokan‐Desmoinesian (～313–306 Ma) fluctuating glacio‐eustatic sea levels deposited an ～2500 m thick sequence of evaporites (Paradox Formation) in the foreland basin, interfingering with coarse clastics in the foredeep and carbonates around the basin margins. The cyclic deposition of the evaporites produced a repetitive sequence of primarily halite, with minor clastics, organic shales and anhydrite. Sediment loading of the evaporites subsequently produced a series of salt walls and minibasins, through the process of passive diapirism or downbuilding. Faults at the top Mississippian level localised the development of linear salt walls (up to 4500 m high) along a NW–SE trend. A crosscutting NE–SW structural trend was also important in controlling the evaporite facies and the abrupt termination of the salt walls. Seismic, well and field data define the proximal Cutler Group (Permian) as a basinward prograding sequence derived from the growing Uncompahgre uplift that drove salt basinwards (towards the southwest), triggering the growth of the salt walls. Sequential structural restorations indicate that the most proximal salt walls evolved earlier than the more distal ones. The successive development of salt‐withdrawal minibasins associated with each growing salt wall implies that parts of the Cutler Group in one minibasin may have no chronostratigraphic equivalent in other minibasins. Localised changes in along‐strike salt wall growth and evolution were critical in the development of facies and thickness variations in the late Pennsylvanian to Triassic stratigraphic sequences in the flanking minibasins. Salt was probably at or very close to the surface during the downbuilding process leading to localised thinning, deposition of diapir‐derived detritus and rapid facies changes in sequences adjacent to the salt wall structures.     

Mass-transport complexes (MTCs) document subsidence patterns in a northern Gulf of Mexico salt minibasin

Mass-transport complexes (MTCs) dominate the stratigraphic record of many salt-influenced sedimentary basins. Commonly in such settings, halokinesis is invoked as a primary trigger for MTC emplacement, although the link between specific phases of salt movement, and related minibasin dynamics, remains unclear. Here, we use high-quality 3D seismic reflection and well data to constrain the composition, geometry and distribution (in time and space) of six MTCs preserved in a salt-confined, supra-canopy minibasin in the northern Gulf of Mexico, and to assess how their emplacement relate to regional and local controls. We define three main tectono-sedimentary phases in the development of the minibasin: (a) initial minibasin subsidence and passive diapirism, during which time deposition was dominated by relatively large-volume MTCs (c. 25 km³) derived from the shelf-edge or upper slope; (b) minibasin margin uplift and steepening, during which time small-volume MTCs (c. 20 km³) derived from the shelf-edge or upper slope were emplaced; and (c) active diapirism, during which time very small volume MTCs (c. 1 km³) were emplaced, locally derived from the diapir flanks or roofs. We present a generic model that emphasizes the dynamic nature of minibasin evolution, and how MTC emplacement relates to halokinetic sequence development. Although based on a single data-rich case study, our model may be applicable to other MTC-rich, salt-influenced sedimentary basins.     

The timing of salt structure growth in the Southern Permian Basin (Central Europe) and implications for basin dynamics

In this paper, a literature‐based compilation of the timing and history of salt tectonics in the Southern Permian Basin (Central Europe) is presented. The tectono‐stratigraphic evolution of the Southern Permian Basin is influenced by salt movement and the structural development of various types of salt structures. The compilation presented here was used to characterize the following syndepositional growth stages of the salt structures: (a) “phase of initiation”; (b) phase of fastest growth (“main activity”); and (c) phase of burial’. We have also mapped the spatial pattern of potential mechanisms that triggered the initiation of salt structures over the area studied and summarized them for distinct regions (sub‐basins, platforms, etc.). The data base compiled and the set of maps produced from it provide a detailed overview of the spatial and temporal distribution of salt tectonic activity enabling the correlation of tectonic phases between specific regions of the entire Southern Permian Basin. Accordingly, salt movements were initiated in deeply subsided graben structures and fault zones during the Early and Middle Triassic. In these areas, salt structures reached their phase of main activity already during the Late Triassic or the Jurassic and were mostly buried during the Early Cretaceous. Salt structures in less subsided sub‐basins and platform regions of the Southern Permian Basin mostly started to grow during the Late Triassic. The subsequent phase of main activity of these salt structures took place from the Late Cretaceous to the Cenozoic. The analysis of the trigger mechanisms revealed that most salt structures were initiated by large‐offset normal faults in the sub‐salt basement in the large graben structures and minor normal faulting associated with thin‐skinned extension in the less subsided basin parts.     

Complex interplay of faulting,glacioeustatic variations and halokinesis during deposition of upper Viséan units over thick salt in the western Cumberland Basin of Atlantic Canada

The late Palaeozoic Cumberland Basin of Nova Scotia and New Brunswick (eastern Canada) developed as a strike‐slip basin in the aftermath of the Middle Devonian Acadian Orogeny. Following deposition of thick salt during the middle Viséan (middle Mississippian), this basin mainly accommodated fault‐controlled continental deposits during the late Viséan, which generated halokinesis from clastic loading. The Mississippian halokinetic history of this basin is cryptic, as it was severely distorted by subsequent tectonic and halokinetic overprints. After minor structural restoration, the study of upper Viséan minibasin units in wide coastal sections and deep wells allowed a fairly detailed reconstruction of the Mississippian halokinetic setting to be made. Paleoenvironments and depositional settings in the western part of the basin include sectors that were proximal to three fault‐bounded source areas and characterized by alluvial fan systems transitioning laterally into gravelly to sandy braidplain environments. More central areas of the basin were characterized by tidal flats transitioning laterally into shallow marine environments. Because of halokinesis, the marine body was eventually forced to subdivide into three separate salt expulsion minibasins. Although late Viséan marine incursions were short‐lived in the rest of eastern Canada due to ongoing glacioeustatic variations, there are sedimentologic and stratigraphic lines of evidence for the long‐lasting entrapment of restricted marine bodies in salt expulsion minibasins of the western Cumberland Basin. In one minibasin that was characterized by especially high accommodation rates, NE of Hopewell Cape (New Brunswick), the proximal conglomerates and marine carbonates of a fan‐delta setting transition laterally into thick sulphate over a short distance, away from freshwater inputs from the source area. The vertical continuity of the latter sulphate succession suggests that this entrapped evaporitic basin was cut‐off from significant marine influxes, even at times of glacioeustatic highstands. This is in contrast with salt expulsion minibasins in open marine shelf settings, which always remain open to global marine transgressions and regressions.     

Salt tectonics vs. inversion tectonics: The anticlines of the western Maestrazgo revisited (eastern Iberian Chain,Spain)

Many works in the last decades underline the role of evaporites, not just as a conditioning factor but as the engine for subsidence and eventually basin inversion. The western Mediterranean alpine ranges are being investigated in this regard because of the presence of discontinuous units of Permian to Triassic evaporites, deposited in the western Tethys basins. This work presents a thorough analysis of two particular structures (Cañada Vellida and Miravete anticlines) in the intraplate Maestrazgo basin (eastern Iberian Chain, Spain) in which evidence to support their reinterpretation as salt-driven structures have been recently reported. Our analysis includes (i) a comprehensive stratigraphic and structural study of the folds along their entire trace, (ii) the compilation of thickness and distribution of evaporite–bearing and supraevaporite units, paying special attention to changes in the thickness of units in relation to anticlines, and (iii) the study of fault patterns, sometimes in relation to the mechanical stratigraphy. All three aspects are also documented and discussed on a regional scale. The new data and interpretations reported here reinforce the extensional origin of the Late Jurassic–Early Cretaceous basins, and the role of regional extensional tectonics as the responsible for the development of first-order syn-sedimentary normal fault zones driving the formation and evolution of sub-basins. These basins were subsequently inverted and deformed, including the formation of complex, box-geometry anticlines that, in their turn, controlled deposition in Cenozoic basins. The review of the arguments that support the alternative of salt tectonics for the origin of such anticlines has allowed us to delve into the sedimentary and tectonic evolution of the inverted extensional basins and to propose a specific model for the development of these faulted anticlines. The role of salt levels and other interlayered detachments in the structuring of sedimentary basins and their inversion is also pondered. The observations in the eastern Iberian Chain reported here have implications to assess ongoing reinterpretations in terms of salt tectonics in other alpine basins and ranges of the western Mediterranean.     

Syn-depositional halokinesis in the Zechstein Supergroup (Lopingian) controls Triassic minibasin genesis and location

Salt tectonics is typically caused by the flow of mobile evaporites in response to post-depositional gravity gliding and/or differential loading by overburden sediments. This situation is considerably more complex near the margins of salt basins, where carbonate and clastic rocks may be deposited at the same time as and be interbedded with more mobile, evaporitic strata. In these cases, syn-depositional salt flow may occur due to density differences in the deposited lithologies, although our understanding of this and related processes is relatively poor. We here use 3D seismic reflection and borehole data from the Devil's Hole Horst, West Central Shelf, offshore UK to understand the genesis, geometry, and kinematic evolution of intra-Zechstein Supergroup (Lopingian) minibasins and their effect on post-depositional salt deformation. We show that immobile, pinnacle-to-barrier-like, carbonate build-ups and anhydrite are largely restricted to intra-basin highs, whereas mobile halite, which flowed to form large diapirs, dominates in the deep basin. At the transition between the intra-basin highs and the deep basin, a belt of intra-Zechstein minibasins occurs, forming due to the subsidence of relatively dense anhydrite into underlying halite. Depending on primary halite thickness, these intra-Zechstein minibasins created topographic lows, dictating where Triassic minibasins subsequently nucleated and down-built. Our study refines the original depositional model for the Zechstein Supergroup in the Central North Sea, with the results also helping us better understand the style and distribution of syn-depositional salt flow within other layered evaporitic sequences and the role intra-salt heterogeneity and related deformation may have in the associated petroleum plays.     

Geology and tectonics of Neoproterozoic salt diapirs and salt sheets in the eastern Willouran Ranges,South Australia

Allochthonous salt structures and associated primary and secondary minibasins are exposed in Neoproterozoic strata of the eastern Willouran Ranges, South Australia. Detailed geologic mapping using high‐quality airborne hyperspectral remote‐sensing data and satellite imagery, combined with a qualitative structural restoration, are used to elucidate the evolution of this complex, long‐lived (>250 Myr) salt system. Field observations and interpretations at a resolution unobtainable from seismic or well data provide a means to test published models of allochthonous salt emplacement and associated salt‐sediment interaction derived from subsurface data in the northern Gulf of Mexico. Salt diapirs and sheets are represented by megabreccias of nonevaporite lithologies that were originally interbedded with evaporites that have been dissolved and/or altered. Passive diapirism began shortly after deposition of the Callanna Group layered evaporite sequence. A primary basin containing an expulsion‐rollover structure and megaflap is flanked by two vertical diapirs. Salt flowed laterally from the diapirs to form a complex, multi‐level canopy, now partly welded, containing an encapsulated minibasin and capped by suprasalt basins. Salt and minibasin geometries were modified during the Late Cambrian–Ordovician Delamerian Orogeny (ca. 500 Ma). Small‐scale structures such as subsalt shear zones, fractured or mixed ‘rubble zones’ and thrust imbricates are absent beneath allochthonous salt and welds in the eastern Willouran Ranges. Instead, either undeformed strata or halokinetic drape folds that include preserved diapir roof strata are found directly below the transition from steep diapirs to salt sheets. Allochthonous salt first broke through the diapir roofs and then flowed laterally, resulting in variable preservation of the subsalt drape folds. Lateral salt emplacement was presumably on roof‐edge thrusts or, because of the shallow depositional environment, via open‐toed advance or extrusive advance, but without associated subsalt deformation.     

Salt tectonics in a double salt‐source layer setting (Eastern Persian Gulf,Iran): Insights from interpretation of seismic profiles and sequential cross‐section restoration

Salt tectonics in the Eastern Persian Gulf (Iran) is linked to a unique salt‐bearing system involving two overlapping ‘autochthonous’ mobile source layers, the Ediacaran–Early Cambrian Hormuz Salt and the Late Oligocene–Early Miocene Fars Salt. Interpretations of reflection seismic profiles and sequential cross‐section restorations are presented to decipher the evolution of salt structures from the two source layers and their kinematic interaction on the style of salt flow. Seismic interpretations illustrate that the Hormuz and Fars salts started flowing in the Early Palaeozoic (likely Cambrian) and Early Miocene, respectively, shortly after their deposition. Differential sedimentary loading (downbuilding) and subsalt basement faults initiated and localized the flow of the Hormuz Salt and the related salt structures. The resultant diapirs grew by passive diapirism until Late Cretaceous, whereas the pillows became inactive during the Mesozoic after a progressive decline of growth in the Late Palaeozoic. The diapirs and pillows were then subjected to a Palaeocene–Eocene contractional deformation event, which squeezed the diapirs. The consequence was significant salt extrusion, leading to the development of allochthonous salt sheets and wings. Subsequent rise of the Hormuz Salt occurred in wider salt stocks and secondary salt walls by coeval passive diapirism and tectonic shortening since Late Oligocene. Evacuation and diapirism of the Fars Salt was driven mainly by differential sedimentary loading in annular and elongate minibasins overlying the salt and locally by downslope gliding around pre‐existing stocks of the Hormuz Salt. At earlier stages, the Fars Salt flowed not only towards the pre‐existing Hormuz stocks but also away from them to initiate ring‐like salt walls and anticlines around some of the stocks. Subsequently, once primary welds developed around these stocks, the Fars Salt flowed outwards to source the peripheral salt walls. Our results reveal that evolving pre‐existing salt structures from an older source layer have triggered the flow of a younger salt layer and controlled the resulting salt structures. This interaction complicates the flow direction of the younger salt layer, the geometry and spatial distribution of its structures, as well as minibasin depocentre migration through time. Even though dealing with a unique case of two ‘autochthonous’ mobile salt layers, this work may also provide constraints on our understanding of the kinematics of salt flow and diapirism in other salt basins having significant ‘allochthonous’ salt that is coevally affected by deformation of the deeper autochthonous salt layer and related structures.     

Forward stratigraphic modelling of sediment pathways and depocentres in salt‐influenced passive‐margin basins: Lower Cretaceous,central Scotian Basin

Source‐to‐sink studies and numerical modelling software are increasingly used to better understand sedimentary basins, and to predict sediment distributions. However, predictive modelling remains problematic in basins dominated by salt tectonics. The Lower Cretaceous delta system of the Scotian Basin is well suited for source‐to‐sink studies and provides an opportunity to apply this approach to a region experiencing active salt tectonism. This study uses forward stratigraphic modelling software and statistical analysis software to produce predictive stratigraphic models of the central Scotian Basin, test their sensitivity to different input parameters, assess proposed provenance pathways, and determine the distribution of sand and factors that control sedimentation in the basin. Models have been calibrated against reference wells and seismic surfaces, and implement a multidisciplinary approach to define simulation parameters. Simulation results show that previously proposed provenance pathways for the Early Cretaceous can be used to generate predictive stratigraphic models, which simulate the overall sediment distribution for the central Scotian Basin. Modelling confirms that the shaly nature of the Naskapi Member is the result of tectonic diversion of the Sable and Banquereau rivers and suggests additional episodic diversion during the deposition of the Cree Member. Sand is dominantly trapped on the shelf in all units, with transport into the basin along salt corridors and as a result of turbidity current flows occurring in the Upper Missisauga Formation and Cree Member. This led to sand accumulation in minibasins with a large deposit seawards of the Tantallon M‐41 well. Sand also appears to bypass the basin via salt corridors which lead to the down‐slope edge of the study area. Sensitivity analysis suggests that the grain size of source sediments to the system is the controlling factor of sand distribution. The methodology applied to this basin has applications to other regions complicated by salt tectonics, and where sediment distribution and transport from source‐to‐sink remain unclear.     

Factors controlling stratal pattern and facies distribution of fluvio‐lacustrine sedimentation in the Sivas mini‐basins,Oligocene (Turkey)

The Sivas Basin, located in the Central Anatolian Plateau of Turkey, is a foreland basin that records a complex interaction between sedimentation, salt tectonics and regional shortening during the Oligo‐Miocene leading to the formation of numerous mini‐basins. The Oligocene sedimentary infill of the mini‐basins consists of a thick continental succession, the Karayün Formation, comprising a vertical succession of three main sub‐environments: (i) playa‐lake, (ii) fluvial braided, and (iii) saline lacustrine. These sub‐environments are seen as forming a large Distributive Fluvial System (DFS) modified through time as a function of sediment supply and accommodation related to regional changes in climate and tectonic regime. Within neighbouring mini‐basins and despite a similar vertical stratigraphic succession, subtle variations in facies assemblages and thickness are observed in stratigraphic units of equivalent age, thus demonstrating the local control exerted by halokinesis. Stratigraphic and stratal patterns reveal in great detail the complex interaction between salt tectonics and sedimentation including different types of halokinetic structures such as hooks, wedges and halokinetic folds. The regional variations of accommodation/sediment supply led to coeval changes in the architectural patterns recorded in the mini‐basins. The type of accommodation regime produces several changes in the sedimentary record: (i) a regime dominated by regional accommodation limits the impact of halokinesis, which is recorded as very small variations in stratigraphic thickness and facies distribution within and between mini‐basins; (ii) a regime dominated by localized salt‐induced accommodation linked to the subsidence of each individual mini‐basin enhances the facies heterogeneity within the DFS, causing sharp changes in stratigraphic thickness and facies assemblages within and between mini‐basins.     

Impact of volcanism on the sedimentary record of the Neuquén rift basin,Argentina: towards a cause and effect model

The analysis of volcano‐sedimentary infill in sedimentary basins constitutes a challenge for basin analysis and hydrocarbon exploration worldwide. In order to understand the contribution of volcanism to the sedimentary record in rift basins, we study the Jurassic effusive‐explosive volcanic infill of an inverted extensional depocentre at the Neuquén Basin, Argentina. A cause and effect model that evaluates the relationship between volcanism and sedimentation was devised to develop a conceptual model for the tectono‐stratigraphic evolution of this volcanic rift basin. We show how the variations in the volcanism, coupled with the activity of extensional faults, determined the types of volcanic edifices (i.e., composite volcanoes, graben‐calderas, and lava fields). Volcanic edifices controlled the stacking patterns of the volcanic units as well as sedimentary systems. The landform of the volcanic edifices, as well as the styles and scales of the eruptions governed the sedimentary input to the basin, setting the main variables of the sedimentary systems, such as provenance, grain size, transport and deposition and geometry. As a result, the contrasting volcaniclastic input, from higher volcaniclastic input to lower volcaniclastic input, associated with different subsidence patterns, determined the high‐resolution syn‐rift infill patterns of the extensional depocentre. The cause and effect model presented in this study isolates the variables of the volcanic environments that control the sedimentary scenarios. We suggest that, by adjusting the first order input parameters of the model, these cause and effect scenarios could be adapted to similar rift basins, in order to establish predictive facies models with stratigraphic controls, and the impact of volcanism on their stratigraphic records.     

Controls on fluvial sedimentary architecture and sediment‐fill state in salt‐walled mini‐basins: Triassic Moenkopi Formation,Salt Anticline Region,SE Utah,USA

The Triassic Moenkopi Formation in the Salt Anticline Region, SE Utah, represents the preserved record of a low‐relief ephemeral fluvial system that accumulated in a series of actively subsiding salt‐walled mini‐basins. Development and evolution of the fluvial system and its resultant preserved architecture was controlled by the following: (1) the inherited state of the basin geometry at the time of commencement of sedimentation; (2) the rate of sediment delivery to the developing basins; (3) the orientation of fluvial pathways relative to the salt walls that bounded the basins; (4) spatially and temporally variable rates and styles of mini‐basin subsidence and associated salt‐wall uplift; and (5) temporal changes in regional climate. Detailed outcrop‐based tectono‐stratigraphic analyses demonstrate how three coevally developing mini‐basins and their intervening salt walls evolved in response to progressive sediment loading of a succession of Pennsylvanian salt (the Paradox Formation) by the younger Moenkopi Formation, deposits of which record a dryland fluvial system in which flow was primarily directed parallel to a series of elongate salt walls. In some mini‐basins, fluvial channel elements are stacked vertically within and along the central basin axes, in response to preferential salt withdrawal and resulting subsidence. In other basins, rim synclines have developed adjacent to bounding salt walls and these served as loci for accumulation of stacked fluvial channel complexes. Neighbouring mini‐basins exhibit different styles of infill at equivalent stratigraphic levels: sand‐poor basins dominated by fine‐grained, sheet‐like sandstone fluvial elements, which are representative of nonchannelised flow processes, apparently developed synchronously with neighbouring sand‐prone basins dominated by major fluvial channel‐belts, demonstrating effective partitioning of sediment route‐ways by surface topography generated by uplifting salt walls. Reworked gypsum clasts present in parts of the stratigraphy demonstrate the subaerial exposure of some salt walls, and their partial erosion and reworking into the fill of adjoining mini‐basins during accumulation of the Moenkopi Formation. Complex spatial changes in preserved stratigraphic thickness of four members in the Moenkopi Formation, both within and between mini‐basins, demonstrates a complex relationship between the location and timing of subsidence and the infill of the generated accommodation by fluvial processes.     

Salt thickness and composition influence rift structural style,northern North Sea,offshore Norway

“Salt” giants are typically halite‐dominated, although they invariably contain other evaporite (e.g. anhydrite, bittern salts) and non‐evaporite (e.g. carbonate, clastic) rocks. Rheological differences between these rocks mean they impact or respond to rift‐related, upper crustal deformation in different ways. Our understanding of basin‐scale lithology variations in ancient salt giants, what controls this and how this impacts later rift‐related deformation, is poor, principally due to a lack of subsurface datasets of sufficiently regional extent. Here we use 2D seismic reflection and borehole data from offshore Norway to map compositional variations within the Zechstein Supergroup (ZSG) (Lopingian), relating this to the structural styles developed during Middle Jurassic‐to‐Early Cretaceous rifting. Based on the proportion of halite, we identify and map four intrasalt depositional zones (sensu Clark et al., Journal of the Geological Society, 1998, 155, 663) offshore Norway. We show that, at the basin margins, the ZSG is carbonate‐dominated, whereas towards the basin centre, it becomes increasingly halite‐dominated, a trend observed in the UK sector of the North Sea Basin and in other ancient salt giants. However, we also document abrupt, large magnitude compositional and thickness variations adjacent to large, intra‐basin normal faults; for example, thin, carbonate‐dominated successions occur on fault‐bounded footwall highs, whereas thick, halite‐dominated successions occur only a few kilometres away in adjacent depocentres. It is presently unclear if this variability reflects variations in syn‐depositional relief related to flooding of an underfilled presalt (Early Permian) rift or syn‐depositional (Lopingian) rift‐related faulting. Irrespective of the underlying controls, variations in salt composition and thickness influenced the Middle Jurassic‐to‐Early Cretaceous rift structural style, with diapirism characterising hangingwall basins where autochthonous salt was thick and halite‐rich and salt‐detached normal faulting occurring on the basin margins and on intra‐basin structural highs where the salt was too thin and/or halite‐poor to undergo diapirism. This variability is currently not captured by existing tectono‐stratigraphic models largely based on observations from salt‐free rifts and, we argue, mapping of suprasalt structural styles may provide insights into salt composition and thickness in areas where boreholes are lacking or seismic imaging is poor.     

Strain partitioning due to salt: insights from interpretation of a 3D seismic data set in the NW German Basin

We present results from interpretation of a 3D seismic data set, located within the NW German sedimentary basin, as part of the Southern Permian Basin. We focused on the development of faults, the timing of deformation, the amount of displacement during multiphase deformation, strain partitioning, and the interaction between salt movements and faulting. We recognised the central fault zone of the study area to be the Aller-lineament, an important NW-trending fault zone within the superimposed Central European Basin System. From structural and sedimentological interpretations we derived the following evolution: (1) E–W extension during Permian rifting, (2) N–S extension within cover sediments, and E–W transtension affecting both basement and cover, contemporaneously during Late Triassic and Jurassic, (3) regional subsidence of the Lower Saxony Basin during Late Jurassic/Early Cretaceous, (4) N–S compression within cover sediments, and E–W transpression affecting both basement and cover, contemporaneously during Late Cretaceous/Early Tertiary inversion and (5) major subsidence and salt diapir rise during the Cenozoic. We suggest that the heterogeneity in distribution and timing of deformation in the working area was controlled by pre-existing faults and variations in salt thickness, which led to stress perturbations and therefore local strain partitioning. We observed coupling and decoupling between pre- and post-Zechstein salt units: in decoupled areas deformation occurred only within post-salt units, whereas in coupled areas deformation occurred in both post- and pre-salt units, and is characterised by strike-slip faulting.     

Base-salt relief controls salt-tectonic structural style,São Paulo Plateau,Santos Basin,Brazil

Base-salt relief influences salt flow, producing three-dimensionally complex strains and multiphase deformation within the salt and its overburden. Understanding how base-salt relief influences salt-related deformation is important to correctly interpret salt basin kinematics and distribution of structural domains, which have important implications to understand the development of key petroleum system elements. The São Paulo Plateau, Santos Basin, Brazil is characterized by a >2 km thick, mechanically layered Aptian salt layer deposited above prominent base-salt relief. We use 3D seismic reflection data, and physical and conceptual kinematic models to investigate how gravity-driven translation above thick salt, underlain by complex base-salt relief, generated a complex framework of salt structures and minibasins. We show that ramp-syncline basins developed above and downdip of the main pre-salt highs record c. 30 km of Late Cretaceous-Paleocene basinward translation. As salt and overburden translated downdip, salt flux variations caused by the base-salt relief resulted in non-uniform motion of the cover, and the simultaneous development of extensional and contractional structures. Contraction preferentially occurred where salt flow locally decelerated, above landward-dipping base-salt and downdip of basinward-dipping ramps. Extension occurred at the top of basinward-dipping ramps and base-salt plateaus, where salt flow locally accelerated. Where the base of the salt layer was broadly flat, structures evolved primarily by load-driven passive diapirism. At the edge of or around smaller base-salt highs, salt structures were affected by plan-view rotation, shearing and divergent flow. The magnitude of translation (c. 30 km) and the style of salt-related deformation observed on the São Paulo Plateau afford an improved kinematic model for the enigmatic Albian Gap, suggesting this structure formed by a combination of basinward salt expulsion and regional extension. These observations contribute to the long-lived debate regarding the mechanisms of salt tectonics on the São Paulo Plateau, ultimately improving our general understanding of the effects of base-salt relief on salt tectonics in other basins.