The synrift phase of the early Domeyko Basin (Triassic,northern Chile): Sedimentary,volcanic, and tectonic interplay in the evolution of an ancient subduction‐related rift basin

The geodynamic setting along the SW Gondwana margin during its early breakup (Triassic) remains poorly understood. Recent models calling for an uninterrupted subduction since Late Palaeozoic only slightly consider the geotectonic significance of coeval basins. The Domeyko Basin initiated as a rift basin during the Triassic being filled by sedimentary and volcanic deposits. Stratigraphic, sedimentological, and geochronological analyses are presented in order to determine the tectonostratigraphic evolution of this basin and to propose a tectonic model suitable for other SW Gondwana‐margin rift basins. The Domeyko Basin recorded two synrift stages. The Synrift I (~240–225 Ma) initiated the Sierra Exploradora sub‐basin, whereas the Synrift II (~217–200 Ma) reactivated this sub‐basin and originated small depocentres grouped in the Sierra de Varas sub‐basin. During the rift evolution, the sedimentary systems developed were largely controlled by the interplay between tectonics and volcanism through the accommodation/sediment supply ratio (A/S). High‐volcaniclastic depocentres record a net dominance of the syn‐eruptive period lacking rift‐climax sequences, whereas low‐volcaniclastic depocentres of the Sierra de Varas sub‐basin developed a complete rift cycle during the Synrift II stage. The architecture of the Domeyko Basin suggests a transtensional kinematic where N‐S master faults interacted with ~NW‐SE basement structures producing highly asymmetric releasing bends. We suggest that the early Domeyko Basin was a continental subduction‐related rift basin likely developed under an oblique convergence in a back‐arc setting. Subduction would have acted as a primary driving mechanism for the extension along the Gondwanan margin, unlike inland rift basins. Slab‐induced dynamic can strongly influence the tectonostratigraphic evolution of subduction‐related rift basins through controls in the localization and style of magmatism and faulting, settling the interplay between tectonics, volcanism, and sedimentation during the rifting.     

Tectono‐sedimentary development of early syn‐rift deposits: the Abura Graben,Suez Rift,Egypt

The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets.     

Deep-water sediment transport patterns and basin floor topography in early rift basins: Plio-Pleistocene syn-rift of the Corinth Rift,Greece

Our current understanding on sedimentary deep-water environments is mainly built of information obtained from tectonic settings such as passive margins and foreland basins. More observations from extensional settings are particularly needed in order to better constrain the role of active tectonics in controlling sediment pathways, depositional style and stratigraphic stacking patterns. This study focuses on the evolution of a Plio-Pleistocene deep-water sedimentary system (Rethi-Dendro Formation) and its relation to structural activity in the Amphithea fault block in the Corinth Rift, Greece. The Corinth Rift is an active extensional basin in the early stages of rift evolution, providing perfect opportunities for the study of early deep-water syn-rift deposits that are usually eroded from the rift shoulders due to erosion in mature basins like the Red Sea, North Sea and the Atlantic rifted margin. The depocentre is located at the exit of a structurally controlled sediment fairway, approximately 15 km from its main sediment source and 12 km basinwards from the basin margin coastline. Fieldwork, augmented by digital outcrop techniques (LiDAR and photogrammetry) and clast-count compositional analysis allowed identification of 16 stratigraphic units that are grouped into six types of depositional elements: A—mudstone-dominated sheets, B—conglomerate-dominated lobes, C—conglomerate channel belts and sandstone sheets, D—sandstone channel belts, E—sandstone-dominated broad shallow lobes, F—sandstone-dominated sheets with broad shallow channels. The formation represents an axial system sourced by a hinterland-fed Mavro delta, with minor contributions from a transverse system of conglomerate-dominated lobes sourced from intrabasinal highs. The results of clast compositional analysis enable precise attribution for the different sediment sources to the deep-water system and their link to other stratigraphic units in the area. Structures in the Amphithea fault block played a major role in controlling the location and orientation of sedimentary systems by modifying basin-floor gradients due to a combination of hangingwall tilt, displacement of faults internal to the depocentre and folding on top of blind growing faults. Fault activity also promoted large-scale subaqueous landslides and eventual uplift of the whole fault block.     

The tectono‐sedimentary evolution of a supra‐detachment rift basin at a deep‐water magma‐poor rifted margin: the example of the Samedan Basin preserved in the Err nappe in SE Switzerland

We describe the tectono‐sedimentary evolution of a Middle Jurassic, rift‐related supra‐detachment basin of the ancient Alpine Tethys margin exposed in the Central Alps (SE Switzerland). Based on pre‐Alpine restoration, we demonstrate that the rift basin developed over a detachment system that is traced over more than 40 km from thinned continental crust to exhumed mantle. The detachment faults are overlain by extensional allochthons consisting of upper crustal rocks and pre‐rift sediments up to several kilometres long and several hundreds of metres thick, compartmentalizing the distal margin into sub‐basins. We mapped and restored one of these sub‐basins, the Samedan Basin. It consists of a V‐shape geometry in map view, which is confined by extensional allochthons and floored by a detachment fault. It can be restored over a minimum distance of 11 km along and about 4 km perpendicular to the basin axis. Its sedimentary infill can be subdivided into basal (initial), intermediate (widening) and top (post‐tectonic) facies tracts. These tracts document (1) formation of the basin initially bounded by high‐angle faults and developing into low‐angle detachment faults, (2) widening of the basin and (3) migration of deformation further outboard. The basal facies tract is made of locally derived, poorly sorted gravity flow deposits that show a progressive change from hangingwall to footwall‐derived lithologies. Upsection the sediments develop into turbidity current deposits that show retrogradation (intermediate facies tract) and starvation of the sedimentary system (post‐tectonic facies tract). On the scale of the distal margin, the syn‐tectonic record documents a thinning‐ and fining‐upward sequence related to the back stepping of the tectonically derived sediment source, progressive starvation of the sedimentary system and migration of deformation resulting in exhumation and progressive delamination of the thinned crust during final rifting. This study provides valuable insights into the tectono‐sedimentary evolution and stratigraphic architecture of a supra‐detachment basin formed over hyper‐extended crust.     

Stratigraphy and 40Ar/39Ar geochronology of the Santa Rosa basin,Baja California: Dynamic evolution of a constrictional rift basin during oblique extension in the Gulf of California

The Santa Rosa basin of northeastern Baja California is one of several transtensional basins that formed during Neogene oblique opening of the Gulf of California. The basin comprises Late Miocene to Pleistocene sedimentary and volcanic strata that define an asymmetric half‐graben above the Santa Rosa detachment, a low‐angle normal fault with ca. 4–5 km of SE‐directed displacement. Stratigraphic analysis reveals systematic basin‐scale facies variations both parallel and across the basin. The basin‐fill exhibits an overall fining‐upward cycle, from conglomerate and breccia at the base to alternating sandstone‐mudstone in the depocentre, which interfingers with the fault‐scarp facies of the detachment. Sediment dispersal was transverse‐dominated and occurred through coalescing alluvial fans from the immediate hanging wall and/or footwall of the detachment. Different stratigraphic sections reveal important lateral facies variations that correlate with major corrugations of the detachment fault. The latter represent extension‐parallel folds that formed largely in response to the ca. N‐S constrictional strain regime of the transtensional plate boundary. The upward vertical deflection associated with antiformal folding dampened subsidence in the northeastern Santa Rosa basin, and resulted in steep topographic gradients with a high influx of coarse conglomerate here. By contrast, the downward motion in the synform hinge resulted in increased subsidence, and led to a southwestward migration of the depocentre with time. Thus, the Santa Rosa basin represents a new type of transtensional rift basin in which oblique extension is partitioned between diffuse constriction and discrete normal faulting. ⁴⁰Ar/³⁹Ar geochronology of intercalated volcanic rocks suggests that transtensional deformation began during the Late Miocene, between 9.36 ± 0.14 Ma and 6.78 ± 0.12 Ma, and confirms previous results from low‐temperature thermochronology (Seiler et al., 2011). Two other volcanic units that appear to be part of a conformable syn‐rift sequence are, in fact, duplicates of pre‐rift volcanics and represent allochthonous, gravity‐driven slide blocks that originated from the hanging wall.     

Importance of predecessor basin history on sedimentary fill of a retroarc foreland basin: provenance analysis of the Cretaceous Magallanes basin,Chile (50–52°S)

An integrated provenance analysis of the Upper Cretaceous Magallanes retroarc foreland basin of southern Chile (50°30′–52°S) provides new constraints on source area evolution, regional patterns of sediment dispersal and depositional age. Over 450 new single‐grain detrital‐zircon U‐Pb ages, which are integrated with sandstone petrographic and mudstone geochemical data, provide a comprehensive detrital record of the northern Magallanes foreland basin‐filling succession (>4000‐m‐thick). Prominent peaks in detrital‐zircon age distribution among the Punta Barrosa, Cerro Toro, Tres Pasos and Dorotea Formations indicate that the incorporation and exhumation of Upper Jurassic igneous rocks (ca. 147–155 Ma) into the Andean fold‐thrust belt was established in the Santonian (ca. 85 Ma) and was a significant source of detritus to the basin by the Maastrichtian (ca. 70 Ma). Sandstone compositional trends indicate an increase in volcanic and volcaniclastic grains upward through the basin fill corroborating the interpretation of an unroofing sequence. Detrital‐zircon ages indicate that the Magallanes foredeep received young arc‐derived detritus throughout its ca. 20 m.y. filling history, constraining the timing of basin‐filling phases previously based only on biostratigraphy. Additionally, spatial patterns of detrital‐zircon ages in the Tres Pasos and Dorotea Formations support interpretations that they are genetically linked depositional systems, thus demonstrating the utility of provenance indicators for evaluating stratigraphic relationships of diachronous lithostratigraphic units. This integrated provenance dataset highlights how the sedimentary fill of the Magallanes basin is unique among other retroarc foreland basins and from the well‐studied Andean foreland basins farther north, which is attributed to nature of the predecessor rift and backarc basin.     

Factors controlling stratal pattern and facies distribution of fluvio‐lacustrine sedimentation in the Sivas mini‐basins,Oligocene (Turkey)

The Sivas Basin, located in the Central Anatolian Plateau of Turkey, is a foreland basin that records a complex interaction between sedimentation, salt tectonics and regional shortening during the Oligo‐Miocene leading to the formation of numerous mini‐basins. The Oligocene sedimentary infill of the mini‐basins consists of a thick continental succession, the Karayün Formation, comprising a vertical succession of three main sub‐environments: (i) playa‐lake, (ii) fluvial braided, and (iii) saline lacustrine. These sub‐environments are seen as forming a large Distributive Fluvial System (DFS) modified through time as a function of sediment supply and accommodation related to regional changes in climate and tectonic regime. Within neighbouring mini‐basins and despite a similar vertical stratigraphic succession, subtle variations in facies assemblages and thickness are observed in stratigraphic units of equivalent age, thus demonstrating the local control exerted by halokinesis. Stratigraphic and stratal patterns reveal in great detail the complex interaction between salt tectonics and sedimentation including different types of halokinetic structures such as hooks, wedges and halokinetic folds. The regional variations of accommodation/sediment supply led to coeval changes in the architectural patterns recorded in the mini‐basins. The type of accommodation regime produces several changes in the sedimentary record: (i) a regime dominated by regional accommodation limits the impact of halokinesis, which is recorded as very small variations in stratigraphic thickness and facies distribution within and between mini‐basins; (ii) a regime dominated by localized salt‐induced accommodation linked to the subsidence of each individual mini‐basin enhances the facies heterogeneity within the DFS, causing sharp changes in stratigraphic thickness and facies assemblages within and between mini‐basins.     

Subsurface evidence for late Mesozoic extension in western Mongolia: tectonic and petroleum systems implications

New seismic reflection profiles from the Tugrug basin in the Gobi‐Altai region of western Mongolia demonstrate the existence of preserved Mesozoic extensional basins by imaging listric normal faults, extensional growth strata, and partially inverted grabens. A core hole from this region recovered ca. 1600 continuous meters of Upper Jurassic – Lower Cretaceous (Kimmeridgian–Berriasian) strata overlying Late Triassic volcanic basement. The cored succession is dominated by lacustrine and marginal lacustrine deposits ranging from stratified lacustrine, to subaqueous fan and delta, to subaerial alluvial‐fluvial environments. Multiple unconformities are encountered, and these represent distinct phases in basin evolution including syn‐extensional deposition and basin inversion. Prospective petroleum source and reservoir intervals occur, and both fluid inclusions and oil staining in the core provide evidence of hydrocarbon migration. Ties to correlative outcrop sections underscore that, in general, this basin appears to share a similar tectono‐stratigraphic evolution with petroliferous rift basins in eastern Mongolia and China. Nevertheless, some interesting contrasts to these other basins are noted, including distinct sandstone provenance, less overburden, and younger (Neogene) inversion structures. The Tugrug basin occupies an important but perplexing paleogeographic position between late Mesozoic contractile and extensional provinces. Its formation may record a rapid temporal shift from orogenic crustal thickening to extensional collapse in the Late Jurassic, and/or an accommodation zone with a Mesozoic strike‐slip component.     

Evolution of the Kivu Rift,East Africa: interplay among tectonics,sedimentation and magmatism

The seismically and volcanically active Kivu Rift, in the western branch of the East African Rift System, is a type locale for studies of high‐elevation, humid‐climate rift basins, as well as magmatic basin development. Interpretations of offshore multi‐channel seismic (MCS) reflection data, terrestrial radar topography, lake bathymetry and seismicity data recorded on a temporary array provide new insights into the structure, stratigraphy and evolution of the Kivu rift. The Kivu rift is an asymmetric graben controlled on its west side by a ca. 110 km‐long, N‐S striking border fault. The southern basins of the lake and the upper Rusizi river basin are an accommodation zone effectively linking 1470 m‐high Lake Kivu to 770 m‐high Lake Tanganyika. MCS data in the eastern Kivu lake basin reveal a west‐dipping half graben with at least 1.5 km of sedimentary section; most of the ca. 2 km of extension in this sub‐basin is accommodated by the east‐dipping Iwawa normal fault, which bounds an intrabasinal horst. Lake Kivu experienced at least three periods of near desiccation. The two most recent of these approximately correlate to the African Megadrought and Last Glacial Maximum. There was a rapid lake level transgression of at least 400 m in the early Holocene. The line load of the Virunga volcanic chain enhances the fault‐controlled basin subsidence; simple elastic plate models suggest that the line load of the Virunga volcanic chain depresses the basin by more than 1 km, reduces flank uplift locally and broadens the depocentre. Not only do the voluminous magmatism and degassing to the lake pose a hazard to the riparian population, but our studies demonstrate that magmatism has important implications for short‐term processes such as lake levels, inflow and outlets, as well as long term modification of classic half‐graben basin morphology.     

Extensional fault and fold growth: Impact on accommodation evolution and sedimentary infill

Extensional faults and folds exert a fundamental control on the location, thickness and partitioning of sedimentary deposits on rift basins. The connection between the mode of extensional fault reactivation, resulting fault shape and extensional fold growth is well‐established. The impact of folding on accommodation evolution and growth package architecture, however, has received little attention; particularly the role‐played by fault‐perpendicular (transverse) folding. We study a multiphase rift basin with km‐scale fault displacements using a large high‐quality 3D seismic data set from the Fingerdjupet Subbasin in the southwestern Barents Sea. We link growth package architecture to timing and mode of fault reactivation. Dip linkage of deep and shallow fault segments resulted in ramp‐flat‐ramp fault geometry, above which fault‐parallel fault‐bend folds developed. The folds limited the accommodation near their causal faults, leading to deposition within a fault‐bend synclinal growth basin further into the hangingwall. Continued fold growth led to truncation of strata near the crest of the fault‐bend anticline before shortcut faulting bypassed the ramp‐flat‐ramp structure and ended folding. Accommodation along the fault‐parallel axis is controlled by the transverse folds, the location and size of which depends on the degree of linkage in the fault network and the accumulated displacement on causal faults. We construct transverse fold trajectories by tracing transverse fold hinges through space and time to highlight the positions of maximum and minimum accommodation and potential sediment entry points to hangingwall growth basins. The length and shape of the constructed trajectories relate to the displacement on their parent faults, duration of fault activity, timing of transverse basin infill, fault linkage and strain localization. We emphasize that the considerable wavelength, amplitudes and potential periclinal geometry of extensional folds make them viable targets for CO₂ storage or hydrocarbon exploration in rift basins.     

The architecture of submarine monogenetic volcanoes – insights from 3D seismic data

Many prospective sedimentary basins contain a variety of extrusive volcanic products that are ultimately sourced from volcanoes. However, seismic reflection‐based studies of magmatic rift basins have tended to focus on the underlying magma plumbing system, meaning that the seismic characteristics of volcanoes are not well understood. Additionally, volcanoes have similar morphologies to hydrothermal vents, which are also linked to underlying magmatic intrusions. In this study, we use high resolution 3D seismic and well data from the Bass Basin, offshore southern Australia, to document 34 cone‐ and crater‐type vents of Miocene age. The vents overlie magmatic intrusions and have seismic properties indicative of a volcanic origin: their moderate–high amplitude upper reflections and zones of “wash‐out” and velocity pull‐up beneath. The internal reflections of the vents are similar to those found in lava deltas, suggesting they are composed of volcaniclastic material. This interpretation is corroborated by data from exploration wells which penetrated the flanks of several vents. We infer that the vents we describe are composed of hyaloclastite and pyroclasts produced during submarine volcanic eruptions. The morphology of the vents is typical of monogenetic volcanoes, consistent with the onshore record of volcanism on the southern Australian margin. Based on temporal, spatial and volumetric relationships, we propose that submarine volcanoes can evolve from maars to tuff cones as a result of varying magma‐water interaction efficiency. The morphologies of the volcanoes and their links to the underlying feeder systems are superficially similar to hydrothermal vents. This highlights the need for careful seismic interpretation and characterization of vent structures linked to magmatic intrusions within sedimentary basins.     

Impact of faulting in depocentres development,facies assemblages,drainage patterns,and provenance in continental half-graben basins: An example from the Fanja Basin of Oman

Fault throw gradients create transverse folding, and this can influence accommodation creation and sedimentary routing and infill patterns in extensional half-graben basin. The Fanja half-graben basin (Oman) offers an excellent outcrop of an alluvial fan succession displaying cyclical stacking and basin-scale growth-fold patterns. These unique conditions allow for an investigation of fault-timing and accommodation development related to fault-transverse folding. Our study combines geological mapping, structural analysis, sedimentary logging and correlation, and bulk mineralogical compositions. Mapping reveals that the basin is bounded by a regional-scale fault, with local depocentres changing position in response to transverse syncline and anticline development ascribed to fault-displacement gradients. The alluvial Qahlah Formation (Late Cretaceous) is unconformably overlying the Semail Ophiolite, and is in turn overlain by the marine Jafnayn Formation (Late Palaeocene). Facies and stratigraphic analysis allows for subdivision of the Qahlah Formation into four informal units, from base to top: (i) laterite in topographic depressions of the ophiolite, (ii) greenish pebbly sandstones, deriving from axially draining braided streams deposited in the low-relief half-graben basin. This green Qahlah grades vertically into the red Qahlah, formed by alluvial fanglomerates and floodplain mudstones, with drainage patterns changing from fault-transverse to fault-parallel with increasing distance to the main fault. The red Qahlah can be divided into (iii) the Wadi al Theepa member, found in a western basin depocentre, with higher immaturity and sand: mud ratio, suggesting a more proximal source, and (iv) the Al Batah member, located in the eastern part of the basin. The latter shows better sorting, a lower sand: mud ratio, and more prominent graded sub-units. It also shows eastward expansion from an orthogonal monocline, ascribed to accommodation developed in a relay ramp. Changes in sedimentary facies and depositional patterns are consistent with differential mineralogical composition. The Green Qahlah is composed of quartz and lithic mafic rock fragments, sourced from the ophiolite and schists of the metamorphic basement. The Red Qahlah is composed of chert and kaolinite sourced from the Hawasina Nappe succession in the footwall of the master fault. These changes in source area are linked to unroofing of fault-footwalls and domal structures during the extensional collapse of the Semail Ophiolite. The novelty of this study resides in linking sedimentology and fault-displacement events controlling fault-perpendicular folding, and its influence on depocentre generation and stratigraphic architecture. This is an approach seldom considered in seismic analysis, and rarely analysed in outcrop studies, thus placing the results from this study among the key outcrop-based contributions to the field.     

Syn‐depositional thin‐ and thick‐skinned extensional tectonics in the mid‐Cretaceous Lasarte sub‐basin,western Pyrenees

In the mid‐Cretaceous Lasarte sub‐basin (LSB) [northeastern Basque‐Cantabrian Basin (BCB)] contemporaneous and syn‐depositional thin‐ and thick‐skinned extensional tectonics occur due to the presence of a ductile detachment layer that decoupled the extension. Despite the interest in extension modes of rift basins bearing intra‐stratal detachment layers, complex cases remain poorly understood. In the LSB, field results based on mapping, stratigraphic, sedimentological and structural data show the relationship between growth strata and tectonic structures. Syn‐depositional extensional listric faults and associated folds and faults have been identified in the supra‐detachment thin‐skinned system. But stratigraphic data also indicate the activation of sub‐detachment thick‐skinned extensional faults coeval with the development of the thin‐skinned system. The tectono‐sedimentary evolution of the LSB, since the Late Aptian until the earliest Late Albian, has been interpreted based on thin‐ and thick‐skinned extensional growth structures, which are fossilized by post‐extensional strata. The development of the thin‐skinned system is attributed to the presence of a ductile detachment layer (Upper Triassic Keuper facies) which decoupled the extension from deeper sub‐detachment basement‐involved faulting under a regional extensional/transtensional regime.     

Crust‐scale 3D model of the Western Bredasdorp Basin (Southern South Africa): data‐based insights from combined isostatic and 3D gravity modelling

The southern South African continental margin documents a complex margin system that has undergone both continental rifting and transform processes in a manner that its present‐day architecture and geodynamic evolution can only be better understood through the application of a multidisciplinary and multi‐scale geo‐modelling procedure. In this study, we focus on the proximal section of the larger Bredasdorp sub‐basin (the westernmost of the five southern South African offshore Mesozoic sub‐basins), which is hereto referred as the Western Bredasdorp Basin. Integration of 1200 km of 2D seismic‐reflection profiles, well‐logs and cores yields a consistent 3D structural model of the Upper Jurassic‐Cenozoic sedimentary megasequence comprising six stratigraphic layers that represent the syn‐rift to post‐rift successions with geometric information and lithology‐depth‐dependent properties (porosities and densities). We subsequently applied a combined approach based on Airy's isostatic concept and 3D gravity modelling to predict the depth to the crust‐mantle boundary (Moho) as well as the density structure of the deep crust. The best‐fit 3D model with the measured gravity field is only achievable by considering a heterogeneous deep crustal domain, consisting of an uppermost less dense prerift meta‐sedimentary layer [ρ = 2600 kg m^?3] with a series of structural domains. To reproduce the observed density variations for the Upper Cenomanian–Cenozoic sequence, our model predicts a cumulative eroded thickness of ca. 800–1200 m of Tertiary sediments, which may be related to the Late Miocene margin uplift. Analyses of the key features of the first crust‐scale 3D model of the basin, ranging from thickness distribution pattern, Moho shallowing trend, sub‐crustal thinning to shallow and deep crustal extensional regimes, suggest that basin initiation is typical of a mantle involvement deep‐seated pull‐apart setting that is associated with the development of the Agulhas‐Falkland dextral shear zone, and that the system is not in isostatic equilibrium at present day due to a mass excess in the eastern domain of the basin that may be linked to a compensating rise of the asthenospheric mantle during crustal extension. Further corroborating the strike‐slip setting is the variations of sedimentation rates through time. The estimated syn‐rift sedimentation rates are three to four times higher than the post‐rift sedimentation, thereby indicating that a rather fast and short‐lived subsidence during the syn‐rift phase is succeeded by a significantly poor passive margin development in the post‐rift phase. Moreover, the derived lithospheric stretching factors [β = 1.5–1.75] for the main basin axis do not conform to the weak post‐rift subsidence. This therefore suggests that a differential thinning of the crust and the mantle‐lithosphere typical for strike‐slip basins, rather than the classical uniform stretching model, may be applicable to the Western Bredasdorp Basin.     

Structural evolution of African basins: stratigraphic synthesis

The structural and stratigraphic character of African interior sedimentary basins is highly variable, indicating contrasting basin-forming mechanisms and subsequent subsidence histories. A stratigraphic database has been compiled for African interior depositional basins for the purpose of better understanding basin thermal and structural development. Data are recorded in the form of stratal age, lithology, thickness and elevation of top with respect to present sea level. The data are obtained from published structure contour maps, well sections, and outcrop geology and elevation. There are various degrees of data coverage of the basins, proportional to the amount of water and oil drilling activity. Consequently, there is excellent coverage of North African basins such as the Algerian basin and the Sirte basin, while there is little known about the subsurface of the Congo basin. The stratigraphic data are used to reconstruct the depositional history of the basins, while backstripping leads to the quantification of the thermo-tectonic component of basin subsidence. The nature of basement subsidence can provide constraints on lithospheric flexural rigidity. In addition, the depositional and thermo-tectonic history of each basin bears upon the mechanisms of basin formation and subsidence. Virtually all types of basins are represented in interior Africa, including thrust-loaded basins (Algerian), passive-margin rift basins (Algerian, Sirte), modern active rift basins (East African), ancient rift basins (Benue, Abu Gabra), basins caused by uplift of their margins (Congo, Chad, Illumeden) and even basins that may be related to thermal subsidence of hot-spot domes (Algerian, Sirte).     

Tectonic control on the distribution of Palaeocene marine syn‐rift deposits in the Fenris Graben,northwestern Vøring Basin,offshore Norway

The location, shape and stacking pattern of deep‐marine clastic sediments on drifting stage passive continental margins are strongly influenced by the slope and basin floor topography. The tectonic control on sediment routes and dispersal patterns, however, is less understood on rift margins, particularly the impact of subaqueous transfer zones or relay ramps. In this study, an area of the Palaeocene marine syn‐rift succession in the Vøring Basin is mapped in detail to unravel the relationship between fault geometries and sedimentary infill patterns. Using root‐mean‐square (RMS) amplitudes and deposit thicknesses interpreted from seismic data, sedimentary elements in the Fenris Graben and the Gjallar Ridge are related to the fault patterns and the overall basin geometry. Older deposits are found to be aligned parallel to the basin axis, with the greatest sediment thicknesses on the hanging walls and adjacent to rotated faults. The main sediment supply is interpreted to be sourced from the Vøring Marginal High and Greenland, presumably containing a significant proportion of coarser grained material and comprising numerous local depocentres. With continued rifting and decreased fault activity, finer grained deposition draped the previous basin infill and smoothed the basin floor topography. Deposits close to the foot of relay ramps along the Gjallar Ridge, however, suggest that the high may have acted as a local sediment source leading to local depocentres. Transfer zones played a significant role in sediment transport during the early rifting phase, and were able to maintain some influence into the late rifting and early drifting stage. Identification of early‐ and late‐stage transfer zones may therefore help in locating coarser grained depocentres and potential hydrocarbon reservoirs.     

Tectonic activation,source area stratigraphy and provenance changes in a rift basin: the Early Cretaceous Tucano Basin (NE‐Brazil)

Changes in sandstone and conglomerate maturity in tectonically active basins can be considered either as the product of climatic change or of tectonic restructuring of the feeder drainage system. Besides these regional controls, changes in the configuration of local sources can expressively affect basin fill composition. The Early Cretaceous fluvial successions of the Tucano Basin, a rift basin in northeastern Brazil related to the South Atlantic opening, contain one such case of abrupt change in maturity, marked by the passage from pebbly sandstone and conglomerate rich in quartz and quartzite fragments (Neocomian to Barremian São Sebastião Formation) to more feldspathic pebbly sandstone and conglomerate bearing pebbles of varied composition (Aptian Marizal Formation). Systematic analysis of stratigraphic and spatial variation in palaeocurrents and composition of pebbles and cobbles from both units, integrated with the recognition of fluvial and alluvial fan deposits distribution, revealed an abrupt decrease in maturity during the passage from the São Sebastião Formation to the Marizal Formation. This change is explained by exhumation of basement rocks and erosional removal of originally widespread Silurian to Jurassic sandstone and conglomerate units which were a major source of reworked vein quartz and quartzite pebbles to the São Sebastião Formation. Basin border faults activation during the deposition of the Marizal Formation caused adjacent basement uplift above the local erosional base level at the basin borders, whereas during the São Sebastião Formation deposition, the basin border fault scarps probably exposed mineralogically mature sedimentary units. The proposed model has important implications for interpreting changes in sediment maturity in rift basin successions, as similar results are expected where activation of basin border faults occurs after the erosional removal of older sedimentary or volcanic units that controlled syn‐rift successions composition.     

Using detrital zircon U‐Pb ages to calculate Late Cretaceous sedimentation rates in the Magallanes‐Austral basin,Patagonia

Determining both short‐ and long‐term sedimentation rates is becoming increasingly important in geomorphic (exhumation and sediment flux), structural (subsidence/flexure) and natural resource (predictive modelling) studies. Determining sedimentation rates for ancient sedimentary sequences is often hampered by poor understanding of stratigraphic architecture, long‐term variability in large‐scale sediment dispersal patterns and inconsistent availability of absolute age data. Uranium–Lead (U‐Pb) detrital zircon (DZ) geochronology is not only a popular method to determine the provenance of siliciclastic sedimentary rocks but also helps delimit the age of sedimentary sequences, especially in basins associated with protracted volcanism. This study assesses the reliability of U‐Pb DZ ages as proxies for depositional ages of Upper Cretaceous strata in the Magallanes‐Austral retroarc foreland basin of Patagonia. Progressive younging of maximum depositional ages (MDAs) calculated from young zircon populations in the Upper Cretaceous Dorotea Formation suggests that the MDAs are potential proxies for absolute age, and constrain the age of the Dorotea Formation to be ca. 82–69 Ma. Even if the MDAs do not truly represent ages of contemporaneous volcanic eruptions in the arc, they may still indicate progressive‐but‐lagged delivery of increasingly younger volcanogenic zircon to the basin. In this case, MDAs may still be a means to determine long‐term (≥1–2 Myr) average sedimentation rates. Burial history models built using the MDAs reveal high aggradation rates during an initial, deep‐marine phase of the basin. As the basin shoaled to shelfal depths, aggradation rates decreased significantly and were outpaced by progradation of the deposystem. This transition is likely linked to eastward propagation of the Magallanes fold‐thrust belt during Campanian‐Maastrichtian time, and demonstrates the influence of predecessor basin history on foreland basin dynamics.     

The Hesperides basin: a continental‐scale upper Palaeozoic to Triassic basin in southern Gondwana

The late Palaeozoic to Triassic sedimentary record of the central Argentinean offshore was analysed through the integration of data from exploratory wells and 2D seismic lines. Our interpretations were combined with existing ones in Argentina, Uruguay, Brazil and South Africa for their analysis in the late Palaeozoic south‐western Gondwana context. The mapped upper Palaeozoic‐Lower Triassic stratigraphic record offshore Argentina bears a thickness of +7000 m south of the Colorado basin and encompasses the time span between Pennsylvanian and Lower Triassic; this means that it triples that of the Sierras de la Ventana of Argentina and involves a far larger time span. On the basis of seismic stratigraphic interpretations in localities near the coast, we interpret that a strong denudation process removed a great portion of the stratigraphic record in the Sierras de la Ventana, the surrounding plains and the Tandilia system of Buenos Aires. The seismic stratigraphic configuration of the late Palaeozoic succession shows continuous and parallel reflections in a wide sediment wedge extending for more than 1000 km between the Gondwanides orogen core to the south and offshore Uruguay to the north. Two salient aspects of this sedimentary wedge are that no flexural depocentre was observed at the Ventania fold belt front, and that deformation in the orogenic front is post‐Lower Triassic. The original westwards extent of the basin is interpreted to have encompassed the whole of Buenos Aires province in continuity with the Chacoparaná basin; to the east continuity and a straightforward correlation with the Karoo basin was interpreted. The name of Hespérides Basin is proposed herein to refer to a Pennsylvanian to Lower Triassic basin mainly controlled by dynamic subsidence that encompasses and exceeds the area of the Sauce Grande and Colorado basins and the Claromecó fore‐deep in Argentina. The Hespérides basin is interpreted to have been in lateral continuity with the Kalahari, Karoo and Chacoparaná basins of Africa and South America forming a +3 000 000 sq. km depocentre.     

Supradetachment to rift basin transition recorded in continental to marine deposition; Paleogene Bandar Jissah Basin,NE Oman

A transition from supradetachment to rift basin signature is recorded in the ~1,500 m thick succession of continental to shallow marine conglomerates, mixed carbonate‐siliciclastic shallow marine sediments and carbonate ramp deposits preserved in the Bandar Jissah Basin, located southeast of Muscat in the Sultanate of Oman. During deposition, isostatically‐driven uplift rotated the underlying Banurama Detachment and basin fill ~45° before both were cut by the steep Wadi Kabir Fault as the basin progressed to a rift‐style bathymetry that controlled sedimentary facies belts and growth packages. The upper Paleocene to lower Eocene Jafnayn Formation was deposited in a supradetachment basin controlled by the Banurama Detachment. Alluvial fan conglomerates sourced from the Semail Ophiolite and the Saih Hatat window overlie the ophiolitic substrate and display sedimentary transport directions parallel to tectonic transport in the Banurama Detachment. The continental strata grade into braidplain, mouth bar, shoreface and carbonate ramp deposits. Subsequent detachment‐related folding of the basin during deposition of the Eocene Rusayl and lower Seeb formations marks the early transition towards a rift‐style basin setting. The folding, which caused drainage diversion and is affiliated with sedimentary growth packages, coincided with uplift‐isostasy as the Banurama Detachment was abandoned and the steeper Marina, Yiti Beach and Wadi Kabir faults were activated. The upper Seeb Formation records the late transition to rift‐style basin phase, with fault‐controlled sedimentary growth packages and facies distributions. A predominance of carbonates over siliciclastic sediments resulted from increasing near‐fault accommodation, complemented by reduced sedimentary input from upland catchments. Hence, facies distributions in the Bandar Jissah Basin reflect the progression from detachment to rift‐style tectonics, adding to the understanding of post‐orogenic extensional basin systems.