Chemical Profiles across a Jurassic Stratiform Manganese Deposit at Katsuyama in the Mino Terrane of Central Japan: Implications for Depositional Environment, Diagenetic Metal Redistribution and Paleoceanography

Abstract. Inorganic chemical compositions are determined for a series of rocks crossing an Early Jurassic stratiform manganese ore deposit in a chert‐dominant sequence at Katsuyama, in the Mino Terrane of central Japan. The lithology in the vicinity of the manganese ore bed is classified into lower bedded chert, black shale, massive chert, manganese ore and upper bedded chert, in ascending order. The rocks surrounding the manganese deposit are anomalously high in certain elements: Pb (max. 29 ppm), Ni (1140) and Co (336) in the lower bedded chert, Mo (438), As (149), Tl (29) and U (12) in the black shales, V (210) and Cr (87) in the massive chert, and MnO and W (24) in the manganese ore. The aluminum‐normalized profiles reveal a distinct zonation of redox‐sensitive elements: Pb‐Zn, Ni‐Co‐Cu(‐Zn) and U‐Cr in the lower bedded chert, Mo‐As‐Tl in the black shale, V(‐Cr) in the massive chert, and Mn‐Fe‐Ba‐W in the manganese ore, in ascending order. The lower and upper bedded cherts and manganese ore generally exhibit flat rare earth element patterns with positive Ce anomalies, whereas the uppermost part of the lower bedded chert, the black shale and massive chert have flat patterns with weak or nonexistent negative Ce anomalies and weak positive Eu anomalies. The strong enrichment in Ni, Co, W, Tl and As detected in the Katsuyama section is not recognized in other sediments, including those of anoxic deposition origin, but is identified in modern ferromanganese nodules, suggesting that metal enrichment in the Katsuyama section is essentially due to the formation of ferromanganese nodules rather than to deposition in an anoxic environment. The observed elemental zonation is well explained by equilibrium calculations, reflecting early diagenetic formation and associated gradual reduction with depth. The concentration profiles in combination with litho‐ and biostratigraphical features suggest that formation of these bedded manganese deposits was triggered by an influx of warm, saline and oxic water into a stagnant deep ocean floor basin in Panthalassa at the end of the middle Early Jurassic. Paleoceanographic environmental controls thus appear to be important factors in the formation and preservation of this type of stratiform manganese deposit.     

Chemistry and Sulfur Isotopes in a Chert-dominant Sequence around the Stratiform Manganese Deposit of the Noda-Tamagawa Mine, Northern Kitakami Terrane, Northeast Japan: Implication for Paleoceanographic Environmental Setting

Abstract. Chemistry and sulfur isotopes are analyzed for a series of rocks in the chert‐dominant sequence around the stratiform manganese ore deposit of the Noda‐Tamagawa mine in the northern Kitakami Terrane, northeast Japan. The sequence is litholog‐ically classified into six units in ascending order: lower bedded chert, lower black shale, massive chert, manganese ore, upper black shale, and upper bedded chert. The rocks around the manganese ore deposit exhibit anomalous enrichment in Ni (max. 337 ppm), Zn (102) and U (30) in the upper part of lower bedded chert, Mo (122), Tl (79) and Pb (33) in the lower black shale, MnO, Cu (786) and Co (62) in the manganese ore, and As (247) and Sb (17) in the upper black shale. The aluminum‐normalized profiles reveal zonal enrichment of redox‐sensitive elements around the manganese bed: Zn‐Ni‐Fe‐Mo‐U(‐Co), Tl‐Pb(‐Mo), Mn‐Fe‐Cu‐V‐Cr‐Co(‐Zn) and As‐Sb in ascending order. The uppermost part of the lower bedded chert and black shale exhibit negative Ce/Ce* values, whereas the massive chert, manganese ore and lower part of the upper bedded chert display positive values. The isotopic δ³⁴S values are 0±6 % in the lower part of the lower bedded chert, ‐19 to ‐42 % in the upper part of the lower bedded chert, ‐36 to ‐42 % in the lower black shale, ‐28 to ‐35 % in the massive chert, manganese ore and upper black shale, and ‐23±5 % in the upper bedded chert. Thus, there is a marked negative shift in δ³⁴S values in the lower bedded chert, and an upward‐increasing trend in δ³⁴S through the manganese ore horizon. The present data provide evidence for a change in the paleoceanographic environmental resulting from inflow of oxic deepwater into the stagnant anoxic ocean floor below the manganese ore horizon. This event is likely to have triggered the precipitation of manganese oxyhydroxides. The redistribution of redox‐sensitive elements through the formation of metalliferous black shale and manganese carbonate ore may have occurred in association with bacterial decomposition of organic matter during early diagenesis of initial manganese oxyhydroxides.     

Petrology and geochemistry of chert on the marginal zone of Yangtze Platform,western Hunan,South China,during the Ediacaran–Cambrian transition

The Ediacaran–Cambrian transition was one of the most critical intervals in Earth history. During this interval, widespread chert was precipitated, commonly as a stratal wedge in carbonates, along the southern margin of the Yangtze Platform, South China. The chert wedge passes into a full chert succession further basinward to the south‐east. Four lithotypes of chert are identified across the marginal zone in western Hunan: mounded, vein, brecciated and bedded chert. The mounded chert is characterized by irregular to digitiform internal fabrics, generally with abundant original vesicles and/or channels that mostly are lined by botryoidal chalcedony cements with minor quartz and barite crystals. The host chert (or matrix) of these mounds is dominated by amorphous cryptocrystalline silica, commonly disseminated with pyrite. The vein chert, with minor quartz locally, generally cross‐cuts the overlying dolostone and chert horizons and terminates under the mounded and/or bedded chert bodies. The brecciated chert commonly occurs as splayed ‘intrusions’ or funnel‐shaped wedges and cross‐cuts the topmost dolostones. The bedded chert, the most common type, generally is thin to medium‐bedded and laminated locally; it is composed of amorphous silica with minor amounts of black lumps. Microthermometry of fluid inclusions from vein and void‐lining minerals (mainly quartz and barite) revealed homogenization temperatures from 120 to 180°C for the trapped primary fluids. Compositionally, these chert deposits generally are pure, with SiO₂ > 92 wt%, and only minor Fe₂O₃ and Al₂O₃ contents, most of which show positive Europium anomalies in rare earth element patterns, especially for the mounded chert. All these data suggest that the marginal zone chert deposits resulted from a low‐temperature, silica‐rich hydrothermal system, in which the mounded chert was precipitated around the releasing vents, i.e. as silica chimneys. The vein and splayed brecciated chert, however, was formed along the syndepositional fault/fracture conduits that linked downward, while the bedded chert was precipitated in the quieter water column from the fallout of hydrothermal plumes onto the sea floor. These petrological and geochemical data provide compelling evidence and a new clue to the understanding of the extensive silica precipitation; rapid tectono‐depositional and oceanic changes during the Ediacaran–Cambrian transition in South China.     

Facies analysis of the Semanggol Formation,South Kedah,Malaysia: A possible Permian–Triassic boundary section

Although the Permian–Triassic Semanggol Formation is widely distributed in northwestern Peninsula Malaysia and is made of various lithofacies, its sedimentology and possible relation with the Permian–Triassic boundary (PTB) were not considered before. In this study, detailed facies analysis was conducted for two sections of the Semanggol Formation at the Bukit Kukus and Baling areas, South Kedah to clarify its sedimentology and relation to the PTB. Four facies from the Permian part of the Semanggol Formation that were identified at the Bukit Kukus section include laminated black mudstone, interbedded mudstone and sandstone, volcanogenic sediments, and bedded chert. In Baling area, the Triassic part of the formation is classified into three members. The lower member comprises of claystone and bedded chert facies, while the middle member is composed of sandstone and claystone interbeds (rhythmite). On the other hand, the upper member is grouped into two main units. The lower unit is mainly claystone and includes two facies: the varve-like laminated silt and clay and massive black claystone. The upper unit is composed of various sandstone lithofacies ranging from hummocky cross stratified (HCS) sandstone to thinly laminated sandstone to burrowed sandstone facies. The HCS sandstones occur as two units of fine-grained poorly sorted sandstone with clay lenses as flaser structure and are separated by a hard iron crust. They also show coarse grains of lag deposits at their bases. The laminated black mudstone at the lowermost part of the Semanggol Formation represents a reducing and quite conditions, which is most probably below the fairweather wave base in offshore environment that changed upwards into a fining upward sequence of tide environment. Abundance of chert beds in the volcanogenic sediments suggests the deposition of tuffs and volcanic ashes in deep marine setting which continues to form the Permian pelagic bedded chert and claystone. The bedded chert in the lower member of the Triassic section suggests its formation in deep marine conditions. The rhythmic sandstone and claystone interbeds of the middle member are suggestive for its formation as a distal fan of a turbidite sequence. Lithology and primary sedimentary structure of the upper member suggest its deposition in environments range from deep marine represented by the varve-like laminated silt and clay to subtidal environment corresponds to the massive black claystone to coastal environment represented by the hummocky sandstone units and reaches the maximum regression at the hiatus surface. Another cycle of transgression can be indicated from the second hummocky unit with transgressive lag deposits that develops to relatively deeper conditions as indicated from the formation of relatively thick laminated sandstone and bioturbated massive sandstone facies that represent tidal and subtidal environment, respectively. Late Permian lithological variation from the radiolarian chert into early Triassic claystone probably resulted from a decrease in productivity of radiolarians and might represent a PTB in the Semanggol Formation. Volcanogenic sediments in the studied section can be used as an evidence for volcanic activities at the end of the Permian, which is probably connected to the nearby volcanic ash layers in the eastern China, the ultimate cause of the PTB in this area. Black mudstone in the Permian part of the studied section may be interrelated to the Latest Permian Anoxia that started to build in the deep ocean well before the event on shallow shelves.     

Genesis and Age Constraints on Gold Deposits of the Daerae Mine, Sangju Area, Central-Northern Sobaegsan Massif, Korea

Abstract: Gold mineralization of the Daerae mine represents the first recognized example of the Jurassic gold mineralization in the Sangju area, Korea. It occurs as a single stage of quartz veins that fill fault fractures in Precambrian gneiss of the central‐northern Sobaegsan Massif. The mineralogical characteristics of quartz veins, such as the simple mineralogy and relatively gold‐rich (65–72 atomic % Au) nature of electrum, as well as the CO₂–rich and low salinity nature of fluid inclusions, are consistent with the ‘mesothermal‐type’ gold deposits previously recognized in the Youngdong area (about 50 km southwest of the Sangju area). Ore fluids were evolved mainly through CO₂ immiscibility at temperatures between about 250 and 325 C. Vein sulfides characteristically have negative sulfur isotopic values (–1.9 to +0.2 %), which have been very rarely reported in South Korea, and possibly indicate the derivation of sulfur from an ilmenite‐series granite melt. The calculated O and H isotopic compositions of hydrothermal fluids at Daerae (δ¹⁸O_water = +5.2 to +5.9 %; δD_water = –59 to –67 %) are very similar to those from the Youngdong area, and indicate the important role of magmatic water in gold mineralization. The ⁴⁰Ar–³⁹Ar age dating of a pure alteration sericite sample yields a high‐temperature plateau age of 188.3 0.1 Ma, indicating an early Jurassic age for the gold mineralization at Daerae. The lower temperature Ar‐Ar plateau defines an age of 158.4 2.0 Ma (middle Jurassic), interpreted as reset by a subsequent thermal effect after quartz vein formation. The younger plateau age is the same as the previously reported K‐Ar ages (145–171 Ma) for the other ‘mesothermal–type’ gold deposits in the Youngdong and Jungwon areas, Korea, which are too young in view of the new Jurassic Ar‐Ar plateau age (around 188 Ma).     

Ore Geology, Fluid Geochemistry and Genesis of the Shanggong Gold Deposit, Eastern Qinling Orogen, China

Abstract. The Shanggong Au deposit in the Xiong'er Terrane, East Qinling, has reserves of about 30 t Au, making it one of the largest orogenic‐type Au deposits hosted in volcanic rocks in China. The deposit is hosted in the andesitic assemblage of the Xiong'er Group of 1.85?1.4 Ga. Three stages of hydrothermal ore‐forming processes are recognized, Early (E), Middle (M) and Late (L), characterised by quartz‐pyrite, polymetallic sulfides and carbonate‐quartz, respectively. Homogenization temperatures of fluid inclusions are between 380‐320d?C for the E‐stage, 300‐220d?C for the M‐stage and 200‐120d?C for the L‐stage. The composition of fluid inclusions changed from CO₂‐rich in the E‐stage to CO₂‐poor L‐stage. The M‐stage fluid has the highest contents of cations and anions (e.g., SO₄^2‐, Cl¹, K+), the highest (K+Na)/(Mg+Ca) and lowest CO₂/H₂O ratios, which probably resulted from CO₂ phase separation. This, together with the alkaline and reducing conditions, as indicated by highest pH and lowest Eh values, is most conducive to the deposition of polymetallic sulfides and native elements such as Au, Ag and Te. H‐O isotope systematics indicate that ore fluids evolved from deep‐sourced through to shallow‐sourced, with the M‐stage being a mixing phase of these two fluid‐systems. Nineteen δ¹⁸O_W values, from 4.2 to 13.4 %o, averaging 8.1 %o, suggest that the E‐stage fluids derived from metamorphic devolatilization of sedimentary rocks at depth. Comparison of the H‐O isotope systematics between the Shanggong deposit and the main lithologies in the Xiong'er Terrane, shows that neither these nor the underlying lower crust and mantle, or combinations thereof, could be considered as the source of ore fluids and metals for the Shanggong Au deposit. Instead, a source which meets the isotopic constraints, is a carbonaceous carbonate‐sandstone‐shale‐chert (CSC) sequence, which is present in the Guandaokou and Luanchuan Groups in the south of the Xiong'er Terrane. This conclusion is supported by thirteen high δ¹⁸O values of the Meso‐Neoproterozoic strata south of the Machaoying fault, and the high δ¹⁸O_W values calculated for their possibly metamorphic fluids. It can be also supported by previous observation that the Guandaokou and Luanchuan Groups were underthrust beneath the Xiong'er Terrane, during the Mesozoic collision between the Yangtze and Sinokorean continents. Available isotope ages, together with geological field data, constrain the timing of the Au metallogenesis between 250?110 Ma. This metallogenesis and associated granitic magmatism, can be related to the Yangtze‐Sinokorean continental collision that resulted in the formation of the Qinling Orogen. This collision event progressed from early compression (Triassic to Early Jurassic), through middle compression‐to‐extension transition (Late Jurassic to Early Cretaceous), to late extension (Cretaceous). These three stages in the evolution of the Qinling Orogen form the basis of an ore genesis model that combines collisional orogeny, metallogeny and fluid flow (CMF model). These three evolutionary stages correspond to the three‐stages of ore‐forming fluids of the Shanggong Au deposit. We conclude that the formation of the Shanggong Au deposit is a result of the Mesozoic northward intracontinental A‐type subduction along the Machaoying fault during Yangtze‐Sinokorean continental collision, which led to the metamorphic devolatilization of the CSC sequence, thereby providing both fluids and metals.     

Study on the Tectonic Setting for the Ophiolites in Xigaze, Tibet

The Xigaze ophiolite is located in the middle section of the Yarlung Zangbo River ophiolite belt and includes a well-preserved sequence section of seven ophiolite blocks. The relatively complete ophiolitic sequence sections are represented by Jiding, Dejixiang, Baigang, and Dazhuqu ophiolites and consist of three–four units. The complete ophiolite sequence in order from the bottom to top consists of mantle peridotite, cumulates, sheeted sill dike swarms, and basic lavas±radiolarian chert. These cumulates are absent in the remaining blocks of Dejixiang and Luqu. The age of radiolaria in the radiolarian chert is Late Jurassic–Cretaceous. The basalt and ultramafic rock of the ophiolite also are overlaid by Tertiary Liuqu conglomerate, which contains numerous pebble components of ophiolite, indicating that the Tethys Ocean began to close at the end of Cretaceous Period. The isotopic data of gabbro, diabase, and albite granite in the Xigaze ophiolite are approximately 126–139 Ma, which indicates that the ophiolite formed in the Early Cretaceous. The K–Ar age of amphibole in garnet amphibolite in the ophiolite mélange is 81 Ma, indicating that tectonic ophiolite emplacement occurred at the end of Late Cretaceous.     

Radiolarian Age of Red Chert from the Kunimiyama Ferromanganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. The radiolarian age of red chert from the Kunimiyama area of the Northern Chichibu Belt was determined in order to constrain the depositional age of the Kunimiyama deposit that is among the largest ferromanganese deposits in Japan. Pseudoalbaillella cf scalprata Holdsworth and Jones, Pseudoalbaillella cf longicornis Ishiga and Imoto and Pseudoalbaillella sp. belonging to the Ps. lomentaria Zone are found in the red chert, indicating an age of middle Early Permian (middle Wolfcampian). The red chert occurs immediately above the ferromanganese deposit, and the boundary between them is gradual. Based on their mode of occurrence and geochemical features, it is most likely that radiolarian chert and ferromanganese precipitate accumulated simultaneously to produce red chert during the waning stage of submarine hydrothermal activity that was responsible for the Kunimiyama deposit. Consequently, the age of Kunimiyama stratiform ferromanganese deposit is constrained as middle Early Permian (middle Wolfcampian).     

Origin and age of rift related fluorite and manganese deposits from the San Rafael Massif,Argentina

The San Rafael Massif is characterized by widespread fluorite and manganese epithermal ore deposits whose origin has been under debate to the present. Isotopic (Sm/Nd and K/Ar) and geochemical (trace elements and REE) data of fluorite and manganese ore allowed to establish the age and genesis of the deposits and to propose a regional genetic model. The fluorite deposits were formed during the Upper Triassic–Lower Jurassic as a result of the Triassic rifting that launched a hydrothermal activity at regional scale. The hydrothermal fluids had low T and high fO₂ with fluorine probably derived from a mantle source and REE scavenged from the volcanics of the Gondwanan Choiyoi Magmatic Cycle upper section. The manganese deposits were formed by oxidizing hydrothermal fluids that collected Mn from deep sources and also leached REE from the upper section of the Choiyoi Magmatic Cycle during two mineralization episodes. One episode was linked to the rift tectonic setting that remained active up to the Upper Cretaceous and the other was related to an Early Miocene back-arc extensional geodynamic setting. Both manganese and fluorite deposits were formed in extensional tectonic settings within an epithermal environment near the surface, and can be ascribed to the general model of detachment-related deposits.     

Stratigraphy and sedimentology of Jurassic bedded chert overlying ophiolites in the North Apennines, Italy

In the North Apennines of Italy, Upper Jurassic bedded chert stratigraphically overlies ophiolitic rocks and is overlain by Lower to Middle Cretaceous pelagic limestone and shale, and Upper Cretaceous flysch. The bedded chert, best exposed in East Liguria and on Elba, is typically 30–80 m thick, but occasionally reaches 150–200 m thickness. It consists of two main alternating lithologïes: siliceous mudstone (SM) and radiolarite (R). Chert sections commonly show characteristic stratigraphic changes. Lower cherts display a striking rhythmic alternation of R and ferruginous SM beds. In middle cherts, SM beds are much less ferruginous and shalier intercalations are locally present. In upper cherts, R beds are less frequent and SM beds are essentially non-ferruginous. R beds are generally 1–4 cm thick, and consist of 80–90% quartz, 5–15% clays and usually < 1% hematite. They are commonly parallel-laminated, and rarely size-graded. In size-graded beds, large radiolaria are more abundant near the bed base (commonly together with ophiolitic or SM clasts) and small radiolaria more abundant near the bed top. Sorting is poor throughout most R beds. R beds are interpreted as turbidites (cf. Nisbet & Price, 1974). Model calculations suggest that typical settling velocities of radiolaria during redeposition are < 1 cm sec^?1, which is low and of restricted range relative to the 1–10 cm sec^?1 settling velocities of clastic grains of comparable size range. Radiolaria therefore should have only a limited tendency to grade and sort during deposition from a turbulent current. SM beds are commonly 1–7 cm thick, although much thicker ones occur near the base of sections, and consist mainly of 50–70% quartz, 15–35% clays and 0–15% hematite. Microscopic clay-silica aggregates and highly corroded remnants of radiolaria are common. SM beds are interpreted as mainly ambient pelagic sediment which accumulated slowly in topographic lows, and which was modified by near-surface dissolution of biogenic silica. In SM beds which contain two texturally different layers, the lower one is interpreted as the top of the underlying radiolarian turbidite. North Apennine cherts represent the first sediment deposited on oceanic crust formed during the opening of the North Apennine part of the Tethys. The ophiolitic basement had a rugged topography which favoured the redeposition of siliceous sediment. Hematite and local Mn enrichments in SM beds in the lower chert sections represent hydrothermal precipitates inferred to have originated at a spreading axis. During seafloor spreading, accumulation of siliceous sediments progressively reduced the topography. Deposition of ophiolitic detritus within the sediments phased out during early chert sedimentation, and the hydrothermal contribution during early-middle chert sedimentation. As local basins filled, during late chert sedimentation, radiolarian turbidites became less frequent. The first limestones at the top of chert sections are calcareous ooze turbidites derived from above the CCD and deposited slightly below it. Gradual descent of the CCD to ocean floor depths at the end of the Jurassic (Bosellini & Winterer, 1975) led to the replacement of siliceous by carbonate sedimentation.     

Trench-slope channels from the New Zealand Jurassic: the Otekura Formation, Sandy Bay, South Otago

The Otekura Formation (Early Jurassic, Pseudaucella zone) at Sandy Bay comprises part of a 10+ km thick, regressive, forearc shelf and slope sequence, the Hokonui facies belt of the Rangitata Geosyncline. The Otekura Formation is dominantly fine grained, being mostly mudstone, silty mudstone and siltstone. The sediments are volcanogenic throughout. The upper 150 m of the formation contains two 20 m thick, channelized bodies of medium-thick bedded sandy flysch, each associated with thin bedded muddy flysch interpreted as overbank turbidites. Directional indicators within the channel sequence indicate emplacement from the south-southwest. In contrast, rare turbidites that occur below the channel sequence, within the background mudstone sediment, were emplaced from the east, i.e. at right angles to the channelized flows. The immediately overlying Omaru Formation contains more abundant macrofossils, intraclastic conglomerates, and appreciable amounts of traction-emplaced cross-bedded sand. Bioturbated calcareous siltstones with an in situ molluscan fauna follow (Boatlanding Formation), and are of shelf origin. The Omaru Formation is therefore interpreted as a shelf-slope break deposit, and the Otekura Formation as an upper slope facies. Reconnaissance studies indicate that the Otekura Formation is underlain by several kilometres of dominantly fine grained, deep water slope sediments, containing occasional sand and conglomerate filled channels similar to those here described in detail from the Otekura Formation. Such channels are inferred to form when a mass-transported sand, derived from failure higher on the slope, ploughs erosively into the sea floor. After their incision, the channels served for a short time as conduits for downslope transport of sediment, the redeposited deposits of which are found filling each channel. Both channel fills at Sandy Bay are capped by thin-bedded turbidites inferred to have overspilled from similar channels nearby on the slope.     

日本西南部四国增生复合体中的锰矿分布

Bedded manganese ore deposits occur in many localities within the accretionary belts of the Shikoku region, SW Japan. The deposits occur mostly in bedded chert or its metamorphosed equivalent. These chert-hosted manganese deposits are considered to have been manganese nodule/crust-bearing siliceous sediments on deep-sea floor and have been converted to manganese ores by low-grade metamorphism through subduction-accretion process. The mineral assemblages of the ores reflect the metamorphic grade of the accretionary complexes. On the other hand, iron-manganese deposits and some manganese deposits occurring directly over basalt are considered to have been the hydrothermal precipitates associated with submarine volcanism.     

Gold Mineralization in Banded Iron Formation in the Amalia Greenstone Belt,South Africa: A Mineralogical and Sulfur Isotope Study

The Blue Dot gold deposit, located in the Archean Amalia greenstone belt of South Africa, is hosted in an oxide (± carbonate) facies banded iron formation (BIF). It consists of three stratabound orebodies; Goudplaats, Abelskop, and Bothmasrust. The orebodies are flanked by quartz‐chlorite‐ferroan dolomite‐albite schist in the hanging wall and mafic (volcanic) schists in the footwall. Alteration minerals associated with the main hydrothermal stage in the BIF are dominated by quartz, ankerite‐dolomite series, siderite, chlorite, muscovite, sericite, hematite, pyrite, and minor amounts of chalcopyrite and arsenopyrite. This study investigates the characteristics of gold mineralization in the Amalia BIF based on ore textures, mineral‐chemical data and sulfur isotope analysis. Gold mineralization of the Blue Dot deposit is associated with quartz‐carbonate veins that crosscut the BIF layering. In contrast to previous works, petrographic evidence suggests that the gold mineralization is not solely attributed to replacement reactions between ore fluid and the magnetite or hematite in the host BIF because coarse hydrothermal pyrite grains do not show mutual replacement textures of the oxide minerals. Rather, the parallel‐bedded and generally chert‐hosted pyrites are in sharp contact with re‐crystallized euhedral to subhedral magnetite ± hematite grains, and the nature of their coexistence suggests that pyrite (and gold) precipitation was contemporaneous with magnetite–hematite re‐crystallization. The Fe/(Fe+Mg) ratio of the dolomite–ankerite series and chlorite decreased from veins through mineralized BIF and non‐mineralized BIF, in contrast to most Archean BIF‐hosted gold deposits. This is interpreted to be due to the effect of a high sulfur activity and increase in fO₂ in a H₂S‐dominant fluid during progressive fluid‐rock interaction. High sulfur activity of the hydrothermal fluid fixed pyrite in the BIF by consuming Fe²⁺ released into the chert layers and leaving the co‐precipitating carbonates and chlorites with less available ferrous iron content. Alternatively, the occurrence of hematite in the alteration assemblage of the host BIF caused a structural limitation in the assignment of Fe³⁺ in chlorite which favored the incorporation of magnesium (rather than ferric iron) in chlorite under increasing fO₂ conditions, and is consistent with deposits hosted in hematite‐bearing rocks. The combined effects of reduction in sulfur contents due to sulfide precipitation and increasing fO₂ during progressive fluid‐rock interactions are likely to be the principal factors to have caused gold deposition. Arsenopyrite–pyrite geothermometry indicated a temperature range of 300–350°C for the associated gold mineralization. The estimated δ³⁴S_ΣS (= +1.8 to +2.5‰) and low base metal contents of the sulfide ore mineralogy are consistent with sulfides that have been sourced from magma or derived by the dissolution of magmatic sulfides from volcanic rocks during fluid migration.     

Chert spheroids of the Monterey Formation,California (USA): early‐diagenetic structures of bedded siliceous deposits

Chert spheroids are distinctive, early‐diagenetic features that occur in bedded siliceous deposits spanning the Phanerozoic. These features are distinct in structure and genesis from similar, concentrically banded ‘wood‐grain’ or ‘onion‐skin’ chert nodules from carbonate successions. In the Miocene Monterey Formation of California (USA), chert spheroids are irregular, concentrically banded nodules, which formed by a unique version of brittle differential compaction that results from the contrasting physical properties of chert and diatomite. During shortening, there is brittle fracture of diatomite around, and horizontally away from, the convex surface of strain‐resistant chert nodules. Unlike most older siliceous deposits, the Monterey Formation still preserves all stages of silica diagenesis, thus retaining textural, mineralogical and geochemical features key to unravelling the origin of chert spheroids and other enigmatic chert structures. Chert spheroids found in opal‐A diatomite form individual nodules composed of alternating bands of impure opal‐CT chert and pure opal‐CT or chalcedony. With increased burial diagenesis, surrounding diatomite transforms to bedded porcelanite or chert, and spheroids no longer form discrete nodules, yet still display characteristic concentric bands of pure and impure microcrystalline quartz and chalcedony. Petrographic observations show that the purer silica bands are composed of void‐filling cement that precipitated in curved dilational fractures, and do not reflect geochemical growth‐banding in the manner of Liesegang phenomena invoked to explain concentrically banded chert nodules in limestone. Chertification of bedded siliceous sediment can occur more shallowly (< 100 m) and rapidly (< 1 Myr) than the bulk silica phase transitions forming porcelanite or siliceous shale in the Monterey Formation and other hemipelagic/pelagic siliceous deposits. Early diagenesis is indicated by physical properties, deformational style and oxygen‐isotopic composition of chert spheroids. Early‐formed cherts formed by pore‐filling impregnation of the purest primary diatomaceous beds, along permeable fractures and in calcareous–siliceous strata.     

Mineralogy,paragenesis and genesis of the braunite deposits of the Mary Valley Manganese Belt,Queensland, Australia

The Mary Valley manganese deposits exhibit mineralogy and textures characteristic of at least four parageneses. The deposits consist mainly of isolated occurrences of braunite, together with a number of lower and higher valency manganese oxides, and manganese silicates, in bedded radiolarian cherts and jaspers of Permian age. The parageneses are: (a) Braunite — quartz (primary), (b) Braunite — hausmannite — spessartine — tephroite — quartz (metamorphic). (c) Hydrated manganese silicates — barite — braunite — hausmannite (hydrothermal veins), (d) Tetravalent manganese oxides (pyrolusite, cryptomelane, manjiroite, nsutite) (supergene). The primary mineralisation is interpreted as the result of the geochemical separation of Mn from Fe in a submarine exhalative system, and the precipitation of Mn as oxide within bedded radiolarian oozes and submarine lavas. During diagenesis this hydrothermal manganese oxide reacted with silica to produce primary braunite. The later geological of evolution of this volcanogenicsedimentary deposit involved metamorphism, hydrothermal veining by remobilised manganese, and supergene enrichment.     

湖南省成矿地质事件纲要

[研究目的]湖南省矿产资源丰富,矿种及成因类型繁多,但对各类矿产形成的时代和构造背景尚缺乏系统归纳和总结.[研究方法]本文在既有区域矿产资料基础上,结合近些年区域构造演化、成岩成矿年龄、矿床成因机制等研究成果,对湖南省成矿地质事件及各期成矿事件的构造背景、矿床成因、矿产发育和分布特征等进行了系统探讨和总结.[研究结果]...     

Geochemistry and Origin of Ananai Stratiform Manganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. Major and trace element contents are reported for Permian manganese ore and associated greenstone from the Ananai manganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The manganese deposit occurs between greenstone and red chert, or among red chert beds. Chemical compositions of manganese ore are characterized by enrichments in Mn, Ca, P, Co, Ni, Zn, Sr and Ba, and negative Ce and positive Eu anomalies relative to post-Archean average Australian Shale (PAAS). Geochemical features of the manganese ore are similar to those of modern submarine hydrother-mal manganese deposits from volcanic arc or hotspot setting. In addition, geochemical characteristics of the greenstone closely associated with the Ananai manganese deposit are analogous to those of with-in plate alkaline basalt (WPA). Consequently, the Ananai manganese deposit was most likely formed by hydrothermal activity related to hotspot volcanism in the Panthalassa Ocean during the Middle Permian. This is the first report documenting the terrestrially-exposed manganese deposit that was a submarine precipitate at hotspot.     

Stratigraphy and Geochronology of Vertebrate Fossil‐Bearing Jurassic Strata from Linglongta,Jianchang County,Western Liaoning,Northeastern China

Northeastern China contains widely distributed Jurassic terrestrial strata that have yielded many spectacular mammal and pterosaur fossils, in addition to feathered dinosaur fossils and more recent discoveries from Jianchang, particularly from western Liaoning. However, the fossil-bearing stratigraphic succession, regional correlation, and age estimates of the fossils found in Jianchang County and nearby areas have been contentious. Here, we report on the vertebrate fossil-bearing Jurassic stratigraphy from Linglongta, Jianchang County, western Liaoning, including a SHRIMP U-Pb zircon date unambiguously associated with the fossil horizons. The primary goal was to determine the vertebrate fossil-bearing succession. A further aim was to provide age estimations for the fossil-bearing horizon as well as the earliest appearance of feathered dinosaurs, the eutherian–placental clade, and transitional pterosaurs. Field investigations showed that the vertebrate fossil-bearing stratigraphic succession in Jianchang County mainly consists of basal andesites overlain by rhythmic tuffs and tuffaceous lacustrine sediments, with the upper intermediate or acidic lavas interbedded with laminated more or less tuffaceous lacustrine deposits. This sequence correlates well with the Middle Jurassic Lanqi/Tiaojishan Formation in northeastern China. Detailed and accurate field observations showed that the well-preserved vertebrate fossils were buried in either the middle or the upper fine-grained laminated lacustrine deposits. Previous and current SHRIMP U-Pb zircon dates provide an age estimation of 161–159 Myr for the fossil-bearing horizon and vertebrates. This indicates that the earliest appearance of feathered dinosaurs here was more than 159 Myr ago and unquestionably older than Archaeopteryx from Germany, making these the earliest known feathered dinosaurs in the world. Furthermore, the eutherian–placental clade and the known transitional pterosaurs first emerged no later than 161 Myr. The vertebrate assemblage unearthed recently from Linglongta and neighboring areas in Jianchang County belongs to the Daohugou Biota. In addition to feathered dinosaurs, this biota was characterized by mammals, primitive pterosaurs, insects, and plants and was present in Inner Mongolia, western Liaoning, and northern Hebei in northeastern China during the Middle–Late Jurassic.     

Sedimentary manganese metallogenesis in response to the evolution of the Earth system

The concentration of manganese in solution and its precipitation in inorganic systems are primarily redox-controlled, guided by several Earth processes most of which were tectonically induced. The Early Archean atmosphere-hydrosphere system was extremely O₂-deficient. Thus, the very high mantle heat flux producing superplumes, severe outgassing and high-temperature hydrothermal activity introduced substantial Mn²⁺ in anoxic oceans but prevented its precipitation. During the Late Archean, centered at ca. 2.75 Ga, the introduction of Photosystem II and decrease of the oxygen sinks led to a limited buildup of surface O₂-content locally, initiating modest deposition of manganese in shallow basin-margin oxygenated niches (e.g., deposits in India and Brazil). Rapid burial of organic matter, decline of reduced gases from a progressively oxygenated mantle and a net increase in photosynthetic oxygen marked the Archean-Proterozoic transition. Concurrently, a massive drawdown of atmospheric CO₂ owing to increased weathering rates on the tectonically expanded freeboard of the assembled supercontinents caused Paleoproterozoic glaciations (2.45-2.22 Ga). The spectacular sedimentary manganese deposits (at ca. 2.4 Ga) of Transvaal Supergroup, South Africa, were formed by oxidation of hydrothermally derived Mn²⁺ transferred from a stratified ocean to the continental shelf by transgression. Episodes of increased burial rate of organic matter during ca. 2.4 and 2.06 Ga are correlatable to ocean stratification and further rise of oxygen in the atmosphere. Black shale-hosted Mn carbonate deposits in the Birimian sequence (ca. 2.3-2.0 Ga), West Africa, its equivalents in South America and those in the Francevillian sequence (ca. 2.2-2.1 Ga), Gabon are correlatable to this period. Tectonically forced doming-up, attenuation and substantial increase in freeboard areas prompted increased silicate weathering and atmospheric CO₂ drawdown causing glaciation on the Neoproterozoic Rodinia supercontinent. Tectonic rifting and mantle outgassing led to deglaciation. Dissolved Mn²⁺ and Fe²⁺ concentrated earlier in highly saline stagnant seawater below the ice cover were exported to shallow shelves by transgression during deglaciation. During the Sturtian glacial-interglacial event (ca. 750-700 Ma), interstratified Mn oxide and BIF deposits of Damara sequence, Namibia, was formed. The Varangian (≡ Marinoan; ca. 600 Ma) cryogenic event produced Mn oxide and BIF deposits at Urucum, Jacadigo Group, Brazil. The Datangpo interglacial sequence, South China (Liantuo-Nantuo ≡ Varangian event) contains black shale-hosted Mn carbonate deposits. The Early Paleozoic witnessed several glacioeustatic sea level changes producing small Mn carbonate deposits of Tiantaishan (Early Cambrian) and Taojiang (Mid-Ordovician) in black shale sequences, China, and the major Mn oxide-carbonate deposits of Karadzhal-type, Central Kazakhstan (Late Devonian). The Mesozoic period of intense plate movements and volcanism produced greenhouse climate and stratified oceans. During the Early Jurassic OAE, organic-rich sediments host many Mn carbonate deposits in Europe (e.g., Úrkút, Hungary) in black shale sequences. The Late Jurassic giant Mn Carbonate deposit at Molango, Mexico, was also genetically related to sea level change. Mn carbonates were always derived from Mn oxyhydroxides during early diagenesis. Large Mn oxide deposits of Cretaceous age at Groote Eylandt, Australia and Imini-Tasdremt, Morocco, were also formed during transgression-regression in greenhouse climate. The Early Oligocene giant Mn oxide-carbonate deposit of Chiatura (Georgia) and Nikopol (Ukraine) were developed in a similar situation. Thereafter, manganese sedimentation was entirely shifted to the deep seafloor and since ca. 15 Ma B.P. was climatically controlled (glaciation-deglaciation) assisted by oxygenated polar bottom currents (AABW, NADW). The changes in climate and the sea level were mainly tectonically forced.     

Isotopic evidence for channeled fluid flow in low-grade metamorphosed Jurassic accretionary complex in the Northern Chichibu belt, western Shikoku, Japan

The low‐grade metamorphosed Jurassic accretionary complex of the Northern Chichibu Belt, Hijikawa area, western Shikoku, is divided into two units, the Hijikawa and Kanogawa units, that are separated by an out‐of‐sequence thrust (OOST), the Ozu‐Kawabegawa Fault. The Kanogawa unit south of the Ozu‐Kawabegawa fault consists mainly of sandstone, shale, broken formation of alternating sandstone and shale, greenstone, chert, and pelitic melange, while the Hijikawa unit is characterized by a stack of subunits separated by small‐scale thrusts. The subunits are mainly made up of basic, pelitic and psammitic semischists, schistose pelitic melange, and chert. Petrological and mineralogical constraints suggest peak metamorphic conditions of 204–247 °C at 1–3 kbar in the Kanogawa unit, and 228–289 °C at 3–5.6 kbar in the Hijikawa unit. Quartz and quartz‐calcite veins are widely developed in the study area, especially in the Hijikawa unit. Regional variations in stable isotopic data show that the δ¹⁸O_quartz and δ¹⁸O_calcite values in veins tend to increase towards the Ozu‐Kawabegawa Fault. The δ¹⁸O_{whole rock} values are remarkably high in some subunits close to OOSTs within the Hijikawa unit. Oxygen isotopic compositions from vein quartz indicate that a higher δ¹⁸O fluid migrated upward from depth along the Ozu‐Kawabegawa Fault within the accretionary prism during prehnite‐pumpellyite facies metamorphism. The fluid source is inferred to be pelitic rocks at higher temperatures and greater depths within the accretionary prism.