Features and genesis of micro-nanometer-sized grains on shear slip surface of the 2008 Wenchuan earthquake

In coseismic surface rupture zones caused by the 2008 Mw 7.9 Wenchuan earthquake, some thin-layered fault gouges with strong deformation were observed in different locations. In this paper, fault gouge samples were taken as research objects from the Bajiaomiao village in the south-west segment of the principal rupture and the Heshangping village and the Shaba village in the north-east segment of the principal rupture where larger displacements were measured. Fabric characteristics of the fault gouge samples and the morphologies and structures of micro-nanometer grains on Y-shear surfaces were then analyzed by using a stereoscope and SEM. Observation results showed that obvious Y- and R-shears and obvious scratches were well developed in coseismic gouges caused by the 2008 Wenchuan earthquake. Micro-nanometer grains in the fault gouge of the Wenhcuan earthquake were formed mainly due to breaking, grinding, and powdering of fault slipping friction surface. Heat caused by fault slipping (maybe also including heat caused by thermal decomposition) played an important role in producing micro-nanometer sized grains. Existence occurrence state of micro-nanometer sized grains on fault slip surface includes singled grains and their complexes with shapes of ball, silkworm, pancake and mass. The structures mainly include dispersed and close-packed structures besides a few of striped and layered structures. All these structures were formed at the extreme unbalance conditions caused by rapid deforming during an earthquake. There always exist some voids between structures due to loosely contact. Only alienated grains are included in the stripped structure. But there are some singled grains with no deformation in dispersed and close-packed structures besides complexes of grains with morphologies of ball, silkworm, pancake and mass. The striped and close-packed structures are the results of plastic deformation, and the dispersed and layered structures are the results of brittle deformation whereas loose contact of different structures was caused mainly by discontinuous dynamic friction (fault stick-slipping). The structures of the micro-nanometer sized grains in coseismic fault gouge caused by the Wenchuan earthquake are the geological records of seismic fault slipping (it is not pseudotachylite), which could be used as an index of paleo-seismic events.     

Micro-and submicrostructural evidence for high-temperature brittle-ductile transition deformation of hornblende: Case study of high-grade mylonites from Diancangshan, western Yunnan

OM (optical microscope)/TEM (transmission electron microscope) micro- and submicrostructural analysis of hornblende rocks sheared at high temperatures from the Diancangshan area, western Yunnan reveals evidence for deformation in the brittle-ductile transition of hornblende at middle crustal level (about 637℃ and 0.653 GPa) and mechanisms of deformation in the transitional regime are further discussed. Sheared hornblende rocks at middle crustal level have typical mylonitic microstructures, shown by coarse porphyroclasts and fine matrix grains. Different mineral phases in the rocks show distinct deformation characteristics. Hornblende and feldspar grains are intensely deformed with ob- vious grainsize reduction, but quartz grains are recrystallized dominantly by grain growth. Hornblende grains show typical brittle-ductile transition nature. Initial crystallographic orientations of porphyro- clasts have strong effects on the behavior of grains during deformation. There are mainly two types of porphyroclasts, type I "hard" porphyroclasts and type II "soft" porphyroclasts, with [001] perpendicular and parallel to external shear stresses respectively. "Hard" porphyroclasts generally occur as compe- tent grains that are rarely deformed or sometimes deformed by fracturing and dislocation tangling. "Soft" porphyroclasts are highly deformed primarily by dislocation tangling (as shown in the cores of the porphyroclasts), but twinning, dislocation glide and climb probably due to hydrolytic weakening also contribute to dynamic recrystallization of the porphyroclasts into fine grains in the matrix. The micro- and submicrostructures of the two types of porphyroclasts and fine-grained matrix provide powerful evidence for the behavior of brittle-ductile transition of hornblende grains. It is concluded that twinning nucleation is one of the most important processes that operate during dynamic recrystalliza- tion of hornblende crystals at the brittle-ductile transition. (100) [001] twin gliding and dislocation creep (dislocation glide and climb) are mutually enhanced during twinning nucleation. As a newly discovered mechanism of dynamic recrystallization, it may have played more important roles than ever recognized during dynamic recrystallization of crystals with twins in the brittle-ductile transition.     

SHRIMP U–Pb zircon ages of the Hida metamorphic and plutonic rocks,Japan: Implications for late Paleozoic to Mesozoic tectonics around the Korean Peninsula

A new U–Pb zircon geochronological study for the Hida metamorphic and plutonic rocks from the Tateyama area in the Hida Mountains of north central Japan is presented. The U–Pb ages of metamorphic zircon grains with inherited/detrital cores in paragneisses suggest that a metamorphic event took place at around 235–250 Ma; the cores yield ages around 275 Ma, 300 Ma, 330 Ma, 1 850 Ma, and 2 650 Ma. New age data, together with geochronological and geological context of the Hida Belt, indicate that a sedimentary protolith of the paragneisses is younger than 275 Ma and was crystallized at around 235–250 Ma. Detrital ages support a model that the Hida Belt was located in the eastern margin of the North China Craton, which provided zircon grains from Paleoproterozoic to Paleozoic rocks and also from Archean and rare Neoproterozoic rocks. Triassic regional metamorphism possibly reflects collision between the North and South China Cratons.     

Secondary remanent magnetization carried by magnetite inclusions in silicates: a comparative study of unremagnetized and remagnetized granites

Magnetic carriers in remagnetized Cretaceous granitic rocks of northeast Japan were studied using paleomagnetism, rock magnetism, optical microscopy and scanning electron microscopy (SEM) by comparison with unremagnetized granitic rocks. The natural remanent magnetization (NRM) of the remagnetized rocks is strong (0.3–1.7 A/m) and shows a northwesterly direction with moderate inclination (NW remanence), whereas the unremagnetized rocks preserve weak NRM (<0.5 A/m) with westerly and shallow direction (W remanence). Although thermal demagnetization shows that both NRMs are carried by magnetite, the remagnetized rocks reveal a higher coercivity with respect to alternating field demagnetization (20 mT相似文献   

Plagioclase lamellae in hypersthene,Tikkoatokhakh Bay,Labrador

Abundant lamellae of plagioclase are present in the (100) planes of hypersthene megacrysts in andesine anorthosite along Tikkoatokhakh Bay, northwest of Nain, Labrador. Spongy intergrowths of plagioclase in hypersthene also occur. Plagioclase lamellae have mean compositions ranging from An₄₃ to An₉₂, with extreme compositions from An₃₉ to An₉₇; the calcic compositions are the more abundant. Such lamellae are always accompanied in the hypersthene by grains or lamellar segments of magnetite, and rarely by lamellae of olivine, augite, magnetite, or ilmenite. Some calcic plagioclase lamellae contain antiperthitic spindles of orthoclase. The host rocks of the hypersthene megacrysts are layered leuconorites and anorthosites with mean plagioclase compositions ranging from An₄₁ to An₅₅. The plagioclase lamellae in hypersthene are characteristically much more calcic than the host-rock plagioclase. There is little doubt that the lamellae exsolved from a pyroxene host, dominantly by a coupled redox reaction which generated magnetite, thereby releasing silica to combine with the Ca-Tschermak and jadeite components of the precursor pyroxene. Rapid growth of megacrysts may account for their aluminous nature.     

Magnetic domain structures and stray fields of individual elongated magnetite grains revealed by magnetic force microscopy (MFM)

In order to clarify the relationship between microscopic and macroscopic magnetic features of a rock, we applied magnetic force microscopy (MFM) as a local probe on a sample with an intense natural remanent magnetisation, a norite from Heskestad, Norway. We studied in detail seven magnetite (Fe₃O₄) exsolution lamellae, five of them were about 30 μm long and a few micrometers wide, two were significantly shorter; all were located in their natural host, a grain of clinopyroxene. By combining MFM images of surface magnetisation with information about shape observed with optical microscopy (OM), the internal domain structure was determined for individual grains. In general, the lamellae were pseudo-single-domain grains with open-flux domain magnetisations parallel to their long axes. The domain sizes were, in cross-section, on the order of a micrometer for the longer lamellae and about 300 nm for the short lamellae. By increasing the separation between the MFM probe and the exposed end of the lamellae, information could be obtained about the decrease in stray fields for the individual grains. Close to the lamellae, stray fields were significant even for grains with multiple domains. The largest fields were found above the largest domains. A separation of approximately one domain width was found to be a characteristic distance, where stray fields from adjacent domains begin to cancel one another.     

断层黏滑动态变形过程的实验研究

实验研究断层黏滑过程的变形演化,尤其是失稳黏滑瞬间的断层位移演化特征,对于了解地震从孕育到发生的全过程具有重要意义.本文基于数字散斑相关方法(digital speckle correlation method, DSCM),用三套图像采集系统(两套低速和一套高速图像采集系统)搭建了断层黏滑过程的多观测区域、多时间尺度的变形场测量系统,并用此系统对一种花岗岩双剪滑动模型的黏滑过程进行了实验研究.对间黏滑期和黏滑期断层位移演化特征进行深入分析的结果表明:间黏滑期断层位移演化体现出空间上的非均匀性和时间上的"趋同化"特征,断层滑动趋同化也许是断层错动匀阻化的一种宏观表现形式;断层黏滑动态过程持续时间非常短(本文300 mm断层黏滑过程持续时间约在1 ms量级),黏滑失稳前会出现预滑,预滑出现到黏滑失稳发生所经历的时间与黏滑失稳过程所用时间相差一个量级;断层的一次黏滑由若干个滑动速度不同的、小的失稳滑动组成,黏滑失稳过程中断层的滑动速度呈现出波动性,整个滑动过程中断层经历了多个高速滑动和低速滑动的交错.     

Zircon U–Pb dating of gabbro and diorite from the Bato pluton,northeast Japan

To constrain the timing of the tectonothermal events and formation process of a plutonic suite, U–Pb dating was carried out by laser ablation inductively coupled plasma mass spectrometry combined with cathodoluminescence imaging on zircon grains extracted from the Bato pluton, northern Yamizo Mountains, Japan. The Bato pluton consists of gabbro and diorite. Zircon grains separated from a gabbro sample had a unimodal ²³⁸U–²⁰⁶Pb age (105.7 ±1.0 Ma). It was interpreted as the solidification age of the gabbro. Cathodoluminescence observation showed that the zircon grains from a diorite sample were characterized by anhedral cores, oscillatory zoned mantles, and dark rims. The ²³⁸U–²⁰⁶Pb age of the anhedral cores ranged from 2 165 Ma to 161 Ma, indicating the assimilation of surrounding sedimentary rocks. The ²³⁸U–²⁰⁶Pb ages of the oscillatory zoned mantles and dark rims are 109.0 ±1.3 Ma and 107.7 ±1.3 Ma, respectively. Observation under polarizing microscopy suggests that the anhedral cores occurred before plagioclase and hornblende, and the oscillatory zones around the anhedral cores had crystallized at the same time as the crystallization of biotite. Moreover, the dark rims formed at the same time as the crystallization of quartz and K‐feldspar. The formation process of the gabbro‐diorite complex in the Bato pluton was inferred as follows. (i) A mafic initial magma intruded into Mesozoic sedimentary rocks, and the assimilation of these sedimentary rocks led to geochemical variation yielding a dioritic composition. Subsequently, plagioclase and hornblende of the diorite were crystallized before 109.0 ±1.3 Ma. (ii) Biotite crystallized in the middle stage around 109.0 ±1.3 Ma. (iii) Quartz and K‐feldspar of the diorite were crystallized at 107.7 ±1.3 Ma. The gabbroic magma solidified (105.7 ±1.0 Ma) after solidification of the diorite.     

Coexisting different types of zoned garnet in kyanite‐quartz eclogites from the Sanbagawa metamorphic belt: Evidence of deformation‐induced lithological mixing during prograde metamorphism

Garnet grains in Sanbagawa quartz eclogites from the Besshi region, central Shikoku commonly show a zoning pattern consisting of core and mantle/rim that formed during two prograde stages of eclogite and subsequent epidote–amphibolite facies metamorphism, respectively. Garnet grains in the quartz eclogites are grouped into four types (I, II, III, and IV) according to the compositional trends of their cores. Type I garnet is most common and sometimes coexists with other types of garnet in a thin section. Type I core formed with epidote and kyanite during the prograde eclogite facies stage. The inner cores of types II and III crystallized within different whole‐rock compositions of epidote‐free and kyanite‐bearing eclogite and epidote‐ and kyanite‐free eclogite at the earlier prograde stage, respectively. The inner core of type IV probably formed during the pre‐eclogite facies stage. The inner cores of types II, III, and IV, which formed under different P–T conditions of prograde metamorphism and/or whole‐rock compositions, were juxtaposed with the core of type I, probably due to tectonic mixing of rocks at various points during the prograde eclogite facies stage. After these processes, they have shared the following same growth history: (i) successive crystal growth during the later stage of prograde eclogite facies metamorphism that formed the margin of the type I core and the outer cores of types II, III, and IV; (ii) partial resorption of the core during exhumation and hydration stage; and (iii) subsequent formation of mantle zones during prograde metamorphism of the epidote–amphibolite facies. The prograde metamorphic reactions may not have progressed under an isochemical condition in some Sanbagawa metamorphic rocks, at least at the hand specimen scale. This interpretation suggests that, in some cases, material interaction promoted by mechanical mixing and fluid‐assisted diffusive mass transfer probably influences mineral reactions and paragenesis of high‐pressure metamorphic rocks.     

北京北石城断层带与河防口断层带断层岩石显微构造研究

本文论述了糜棱岩类与碎裂岩类的变形特征,它们各自代表了不同的成因机制,反映了断层带经历过早期韧性剪切和后期脆性破裂的发育历史。根据断层岩石的显微构造特征,估算了断层带发育过程中两个阶段的温度、压力、应变速率、差异应力大小和方位,并讨论了韧性剪切带、地壳中弹塑性过渡带与大陆地震多发层之间的关系     

In situ LA-ICP-MS zircon U-Pb age of ultrahigh-pressure eclogites in the Yukahe area,northern Qaidam Basin

Zircon grains were selected from two types of ultrahigh-pressure (UHP) eclogites, coarse-grained phengite eclogite and fine-grained massive eclogite, in the Yukahe area, the western part of the North Qaidam UHP metamorphic belt. Most zircon grains show typical metamorphic origin with residual cores in some irregular grains and sector, planar or misty internal textures on the cathodoluminescence (CL) images. The contents of REE and HREE of the core parts of grains range from 173 to 1680 μg/g and 170 to 1634 μg/g, respectively, in phengite eclogite, and from 37 to 2640 μg/g and 25.7 to 1824 μg/g, respectively, in massive eclogite. The core parts exhibit HREE-enriched patterns, representing the residual zircons of protolith of the Yukahe eclogite. The contents of REE and HREE of the rim parts and the grains free of residual cores are much lower than those for the core parts. They vary from 13.1 to 89.5 μg/g and 12.5 to 85.7 μg/g, respectively, in phengite eclogite, and from 9.92 to 45.8 μg/g and 9.18 to 43.8 μg/g, respectively, in massive eclogite. Negative Eu anomalies and Th/U ratios decrease from core to rim. Positive Eu anomalies are shown in some grains. These indicate that the presence of garnet and the absence of plagioclase in the peak metamorphic mineral assemblage, and the zircons formed under eclogite facies conditions. LA-ICP-MS zircon U-Pb age data indicate that phengite eclogite and massive eclogite have similar metamorphic age of 436±3Ma and 431±4Ma in the early Paleozoic and magmatic protolith age of 783–793 Ma and 748–759 Ma in the Neo-proterozoic. The weighted mean age of the metamorphic ages (434±2 Ma) may represent the UHP metamorphic age of the Yukahe eclogites. The metamorphic age is well consistent with their direct country rocks of gneisses (431±3 Ma and 432±19 Ma) and coesite-bearing pelitic schist in the Yematan UHP eclogite section (423–440 Ma). These age data together with field observation and lithology, allow us to conclude that the Yukahe eclogites were Neo-proterozoic igneous rocks and may have experienced subduction and UHP metamorphism with continental crust at deep mantle during the early Paleozoic, therefore the metamorphic age of 434±2 Ma of the Yukahe eclogites probably represents the continental deep subduction time in this area.

     

Evidence of microstructures and fluid inclusions for the origin of polycrystalline quartz ribbons in high-grade metamorphic rocks in Daqingshan region

Polycrystalline quartz ribbons in high-grade metamorphic rocks from the Daqingshan region, are typi- cal microfabrics of, and provide information for, deep crust deformation and metamorphism. The quartz ribbons have straight boundaries and extend stably along gneissosity. They truncate other mineral grains in the rocks and may contain inclusions of such minerals that are lens-shaped and oriented. They frequently end into branching termination. Analysis fluid inclusions in polycrystalline quartz rib- bons reveal that the complex types of fluid inclusions are inhomogeneously distributed. They are ob- viously different from inclusions captured at granulite facies, in both fluid compositions and T-P esti- mations. Based on microfabric and fluid inclusion analysis, the polycrystalline quartz ribbons are suggested to be formed by SO2-rich fluids filling micro-fractures that are parallel to early gneissosity. The SO2 composition is derived from the deformed host rocks. The fluid phase has significant effects on the rheological characteristics, fracturing of rocks, and formation of quartz ribbons.     

Evidence of microstructures and fluid inclusions for the origin of polycrystalline quartz ribbons in high-grade metamorphic rocks in Daqingshan resion

Polycrystalline quartz ribbons in high-grade metamorphic rocks from the Daqingshan region, are typical microfabrics of, and provide information for, deep crust deformation and metamorphism. The quartz ribbons have straight boundaries and extend stably along gneissosity. They truncate other mineral grains in the rocks and may contain inclusions of such minerals that are lens-shaped and oriented. They frequently end into branching termination. Analysis fluid inclusions in polycrystalline quartz ribbons reveal that the complex types of fluid inclusions are inhomogeneously distributed. They are obviously different from inclusions captured at granulite facies, in both fluid compositions and T-P estimations. Based on microfabric and fluid inclusion analysis, the polycrystalline quartz ribbons are suggested to be formed by SO2-rich fluids filling micro-fractures that are parallel to early gneissosity. The SO2 composition is derived from the deformed host rocks. The fluid phase has significant effects on the rheological characteristics, fracturing of rocks, and formation of quartz ribbons.     

龙门山构造带WFSD-2钻孔岩心磁化率特征及其对大地震活动的响应

岩石磁化率特征可以帮助判断岩石的形成环境,对地震过程中滑动摩擦伴随高温的物理-化学变化具有显著反应.本研究以钻穿龙门山中段构造带的汶川地震断裂科学钻探2号孔(WFSD-2)岩心为研究对象,使用Bartington MS2K磁化率仪对500~2283.56 m深度的岩心进行高分辨率无损磁化率测试,并结合岩性特征和显微结构探讨了龙门山构造带主要岩石单元的磁化率特征及其地震断裂活动的磁学响应.磁化率测试结果表明,由花岗岩和火山碎屑岩组成的彭灌杂岩体的磁化率值(数十到数千个10~(-6)SI)普遍高于上三叠统须家河组沉积岩的磁化率值(数个到数十个10~(-6)SI).从WFSD-2岩性分布来看,彭灌杂岩上下出露四段,其磁化率值特征反映它们属于不同的岩石单元,它们与下伏须家河组地层呈断层接触,构成叠瓦状构造,指示了龙门山构造带具有强烈的地壳缩短作用.断裂带中处于滑动带的断层泥和假玄武玻璃具有高磁化率特征,而断层角砾岩和碎裂岩不具有高磁化率值特征,表明断层岩磁化率增高的原因可能主要与地震断裂滑动摩擦过程中高温作用下发生的磁性矿物转换有关,断层岩中高磁化率异常可作为大地震活动的证据.WFSD-2岩心中的映秀—北川断裂带(600~960 m)可识别出约80条高磁化率异常的断层岩带,揭示映秀—北川断裂带是一条长期活动的断裂带,龙门山构造带形成演化过程中伴随着大地震活动.     

汶川余震震源机制变化的原因

2008年5月12日,汶川M8.0主震是一个主压应力轴NW-SE的逆倾滑型的地震,而之后的余震震源机制解有的与主震震源机制解一致,有的发生了明显变化,由南至北逐步变成走滑型地震.主震和同主震震源机制解一致的部分余震,在构造应力场直接作用下,龙门山推复体向四川地块逆冲,致使在逆断层的上下盘之间的断层面上产生粘滑而发生逆倾...     

Impact of textural patterns on modeled rock weathering rates and size distribution of weathered grains

Rock texture has a critical influence on the way rocks weather. The most important textural factors affecting weathering are grain size and the presence of cracks and stylolites. These discontinuities operate as planes of mechanical weakness at which chemical weathering is enhanced. However, it is unclear how different rock textures impact weathering rates and the size of weathered grains. Here, we use a numerical model to simulate weathering of rocks possessing grain boundaries, cracks, and stylolites. We ran simulations with either synthetic or natural patterns of discontinuities. We found that for all patterns, weathering rates increase with discontinuity density. When the density was <~25%, the weathering rate of synthetic patterns followed the order: grid > honeycomb > Voronoi > brick wall. For higher values, all weathering rates were similar. We also found that weathering rates decreased as the tortuosity of the pattern increased. Moreover, we show that textural patterns strongly impact the size distributions of detached grains. Rocks with an initial monomodal grain size distribution produce weathered fragments that are normally distributed. In contrast, rocks with an initial log-normal size distribution produce weathered grains that are log-normally distributed. For the natural patterns, weathering produced lower modality distributions.     

Characteristic magnetic properties of titanomagnetites in continental igneous rocks

Curie temperatures, hysteresis, alternating field properties and anhysteretic and ordinary susceptibilities have been used to characterize the titanomagnetites in a large collection of continental granites, diorites, syenites, anorthosites, gabbros, diabases and basalts. Low-Curie-point titanomagnetites or titanomaghemites were found only in basalts. In all shallow and deep-seated intrusive rocks, the predominant magnetic phase was nearly-titanium-free titanomagnetite with a Curie point of 520–580°C. Most felsic plutonic rocks owed their magnetic properties to coarse, discrete titanomagnetites with truly multidomain properties. Many mafic plutonic rocks (anorthosites, gabbros, norites) displayed bimodal magnetic properties, strong-field properties being due to the discrete titanomagnetites and weak-field properties being due to fine magnetite inclusions in deuterically altered silicates. The Lowrie-Fuller test and the anhysteretic induction curve were the most diagnostic tests of this bimodal behaviour. Grain-size variation within a single diabase dike or sill had a strong expression in all magnetic properties, except H_R/H_c and the Lowrie-Fuller test. On the other hand, the Lowrie-Fuller test was a sensitive indicator of changes in “effective” grain size in basalts due to the subdivision of grains by ilmenite lamellae.     

Shaking Table Test Study on Dynamic Characteristics of Bridge Foundation Reinforcement on Slopes

With the fast development of bridge construction in mountainous and seismic areas, it is necessary to conduct related research. Based on the design of a shaking table model test, here are the following test results:the filtering effect exists in soil and is affected by the dynamic constraint conditions, the amplitude is strengthened around the natural frequency and weakened in other frequency bands in the Fourier spectrum. Since the acceleration scaling effect occurred on a sloped surface, the acceleration response decreases from the outside to the inside in soil. The dynamic response is relatively strong near the slip surface in bedrock due to the reflection of seismic waves. The failure mode of landslide is decided by the slope angle and slipping mass distribution, and the test shows the front row stabilizing piles should keep a proper distance from bridge foundation so that seismic resistance can be guaranteed for the bridge foundation.     

Provenance of sandstones from the Wakino Subgroup of the Lower Cretaceous Kanmon Group, northern Kyushu, Japan

Abstract The Wakino Subgroup is a lower stratigraphic unit of the Lower Cretaceous Kanmon Group. Previous studies on provenance of Wakino sediments have mainly concentrated on either petrography of major framework grains or bulk rock geochemistry of shales. This study addresses the provenance of the Wakino sandstones by integrating the petrographic, bulk rock geochemistry, and mineral chemistry approaches. The proportions of framework grains of the Wakino sandstones suggest derivation from either a single geologically heterogeneous source terrane or multiple source areas. Major source lithologies are granitic rocks and high‐grade metamorphic rocks but notable amounts of detritus were also derived from felsic, intermediate and mafic volcanic rocks, older sedimentary rocks, and ophiolitic rocks. The heavy mineral assemblage include, in order of decreasing abundance: opaque minerals (ilmenite and magnetite with minor rutile), zircon, garnet, chromian spinel, aluminum silicate mineral (probably andalusite), rutile, epidote, tourmaline and pyroxene. Zircon morphology suggests its derivation from granitic rocks. Chemistry of chromian spinel indicates that the chromian spinel grains were derived from the ultramafic cumulate member of an ophiolite suite. Garnet and ilmenite chemistry suggests their derivation from metamorphic rocks of the epidote‐amphibolite to upper amphibolite facies though other source rocks cannot be discounted entirely. Major and trace element data for the Wakino sediments suggest their derivation from igneous and/or metamorphic rocks of felsic composition. The major element compositions suggest that the type of tectonic environment was of an active continental margin. The trace element data indicate that the sediments were derived from crustal rocks with a minor contribution from mantle‐derived rocks. The trace element data further suggest that recycled sedimentary rocks are not major contributors of detritus. It appears that the granitic and metamorphic rocks of the Precambrian Ryongnam Massif in South Korea were the major contributors of detritus to the Wakino basin. A minor but significant amount of detritus was derived from the basement rocks of the Akiyoshi and Sangun Terrane. The chromian spinel appears to have been derived from a missing terrane though the ultramafic rocks in the Ogcheon Belt cannot be discounted.     

麻城1932年6级地震孕震构造机制探讨

通过收集前人有关地震地质、地球物理等资料,在综合分析的基础上,研究了麻城1932年6级地震的发震构造,并探讨了其孕震构造机制。研究认为,麻城—团风主干断层为该地震的发震构造,次级断层受主干断层控制;震中区处于区域重力、磁力异常区,区内存在低阻层;麻城6级地震是在区域NEE向现代构造应力场的作用下,壳幔尺度垂直隆升共同作用的浅源地震事件;壳幔深度的上隆及NEE向的构造主压应力分别成为该区处于伸展构造环境和具有剪切走滑性质的主要动力来源。