一种扩大FAST视场的方法

所有的大口径射电望远镜都存在这样一个问题：在其分辨率和灵敏度提高的同时，视场变小．而且口径越大，视场越小．这成为大口径望远镜不可回避的矛盾．要解决这个矛盾，可以在望远镜的焦平面上放置Ⅳ个分立馈源．让它们同时工作，这样可以看作把视场扩大了Ⅳ倍．望远镜的工作效率提高Ⅳ倍．但是这样做的缺点是——视场不连续．且馈源数目Ⅳ受到望远镜焦比(F／D)的限制．采用致密焦面阵(dense focal plane array)就可以很好地解决这个问题．致密焦面阵的单元不是喇叭口天线，而是无方向性的Vivaldi天线(Vivaldi antenna)．要把Vivaldi阵列应用到望远镜上，需要对单个Vivaldi天线和Vivaldi阵列的电性能有清楚的认识，并能根据需要来设计照明方向图．还要知道大望远镜的焦面上电磁场的分布情况，借此判断能否应用Vivaldi阵列，以及给出Vivaldi单元的分路赋权网络．主要给出了FAST的焦面场的分布情况．并说明应用Vivaldi阵列的可能性．     

Research on Wind Tower Position Optimization Method of Radio Telescope Site Based on Numerical Simulation

Wind field is a critical issue for radio telescope antenna structure design and observation. As the telescope performance requirements are getting higher and higher, the antenna structure design becomes more and more complicated, and the influence of wind load on antenna pointing in the observation is also serious. How to ensure the stiffness and strength of the structure during the design and to improve the effective observation time during the observation all need accurate wind field data. Due to the traditional wind tower setup method cannot quantitatively evaluate the reliability of the setting point position, so a method based on numerical simulation to optimize the position of the wind tower is proposed. The boundary conditions of numerical simulation are set based on specification parameters, the overall trend is consistent with the measured data, and therefore the simulation accuracy could meet the requirement. Four wind tower positions were set at the test site. According to the simulation results, the root-mean-square error (RMSE) of wind speed between point P2 and the antenna position is the smallest. So, the measured data in P2 could better represent the wind field characteristics of the antenna area.     

基于数值模拟的射电望远镜台址测风塔位置优选方法研究

射电望远镜天线结构设计和观测任务的正常进行都需要台址风场信息.随着望远镜性能要求的提高,天线结构设计越来越复杂,风载荷对天线观测时造成的指向影响也越发明显,如何在设计时保证结构刚度和强度,在观测时提高有效观测时间,都需要准确的风场数据.由于传统台址测风塔布置方法无法对测风塔拟设点的可靠性做出定量化评估,因此提出一种基于数值模拟优化测风塔位置的方法.数值模拟基于规范参数设置边界条件,与实测数据比较,整体趋势吻合,满足精度需求.对试验台址设置了4个测风塔位置,经分析P2点与天线位置的风速均方根误差值(root-mean-square error, RMSE)最小,测得的数据更能表征天线区域的风场特性.     

Accuracy Analysis of the Pointing and Focusing Calibration of the 5 m Terahertz Telescope for Dome A in Antarcticatwo

Pointing calibration and sub-reflector focusing are an important task of antenna measurement, which significantly contributes to the observational performance of a radio telescope. According to the requirements on the pointing accuracy and defocusing gain loss of the 5 m Dome A Terahertz Explorer (DATE5), this paper has derived the requirements of signal-to-noise ratio for the pointing and sub-reflector focusing calibration observations, and selected several astronomical radio sources suitable for the pointing and focusing calibrations at the terahertz waveband in Antarctica, which include planets and ultra-compact HII regions. The effects of the atmospheric absorption and the source angular diameter on the accuracy of calibration measurements are analyzed. Simulations show that when the telescope operates in Antarctica, these sources can provide sufficient flux densities for verifying the pre-established pointing model and focusing model.     

大型射电望远镜主反射面调整方法研究

随着毫米波天文学和空间通信的重要性日益提高, 对天线性能提出了越来越高的要求, 而天线性能往往受到其反射器表面精度的限制. 微波全息技术是一种快速有效的检测反射面天线表面轮廓的测量技术. 通过微波全息测量得到天线口径场, 计算天马65m射电望远镜反射面与理想抛物面的偏差. 天马65m射电望远镜的主反射面板是放射状的, 有14圈. 面板的每个角都固定在面板下方促动器的螺栓上进行上下移动, 且相邻面板交点处的拐角共用一个促动器. 采用平面拟合的方法可以计算各块面板拐角处的调整值, 但是同一个促动器会得到4个不同的调整量. 通过平面拟合, 同时以天线照明函数为权重的平差计算方法得到相邻面板拐角的一个平差值, 即天马65m射电望远镜1104个促动器的最佳调整值. 通过多次调整和新算法的应用, 天马65m射电望远镜反射面的面形精度逐渐提高到了0.24mm.     

采用光学指向系统建立天马13m望远镜指向模型

描述了采用光学望远镜辅助天马13m射电望远镜进行指向测量以及建立指向误差修正模型的方法. 对于小口径望远镜, 指向校准目标源比较少, 用射电法建立指向模型难以覆盖全天区. 利用上海天文台天马13m射 电望远镜进行光学望远镜辅助射电望远镜指向测量研究, 在13m天线背架上安装一套光学指向系统, 获得了优 于3''的重复测量误差. 此外, 通过对影响天线指向因素的分析, 建立了包含8个误差项的指向误差修正模型以及 光轴和电轴偏差模型. 将指向模型代入天线伺服控制系统, 对校准目标射电源进行十字扫描, 得到指向样本残差约 为5''. 该研究可以为实现高精度指向建模提供一种参考方法.     

Analysis and Correction of the Influence of Track Irregularity on the Antenna Pointing

According to the influence mechanism of the antenna track irregularity on the telescope pointing accuracy, the distribution of the track errors and their influence on the pointing of the Urumqi Nanshan 26 m telescope are reanalyzed after the antenna track was reformed by using the whole-body welding technology, and hereby the pointing error model is correspondingly revised. By using the moving least-squares method, the measured height errors of the antenna track plane are fitted with a closed curve, and the tilt of the antenna azimuth axis caused by the track irregularity can be determined accordingly. Comparing it with the measured deviation of the antenna azimuth axis caused by the deformation of antenna pedestal, it can be found that both deviations are strongly correlated. A new pointing error model is established in view of the gravity deformation of antenna pedestal, which includes the north-south and east-west components, as well as the antenna track irregularity. Finally, by scanning a known calibration radio source at different positions in the sky, the measured pointing errors are fitted with the new pointing error model. The result shows that the sinusoidal component of the model error can be well constrained by the new pointing correction model, indicating that the new model can reflect very well the antenna pointing error, and can amend it to a certain extend.     

Space very long baseline interferometry observations of polarization in the jet of 3C 380

A comparison between low-frequency space very long baseline interferometry (VLBI) and high-frequency ground-based VLBI images can, in principle, be used to detect small variations in rotation measure (RM) on fine angular scales inaccessible to ground arrays alone. This paper reports an attempt to perform such a comparison using the jet in the quasar 3C 380. Observations made with the VSOP antenna HALCA together with a ground array at wavelength 1.6 GHz provide total intensity and polarization images of comparable resolution to those from the ground array alone at 5 GHz. The results provide an image showing derotated magnetic vector position angle of somewhat higher resolution than that available earlier. The results show variations in an RM around component A of the order of 10 rad m⁻² that could not have been detected with the ground array alone. It is concluded that satellite VLBI observations provide a promising means to study the distribution of matter and magnetic fields around parsec-scale jets.
The ground observations used here follow the steady outward drift of component A, which has approximately doubled its distance from the core since the first observations in 1982. They also reveal total intensity and polarization structure associated with a bright knot 0.7 arcsec from the core which is reminiscent of that expected for a conical shock wave.     

面向新疆奇台110 m射电望远镜宽带双极化Vivaldi馈源设计

射电望远镜一般要在宽频段内进行连续观测, 但传统相控阵天线设计方法难以兼顾宽频带和大角度扫描特性. 紧耦合天线的设计方法为宽带大角度扫描天线提供了新的设计思路, 基于此设计了一款宽带双极化 Vivaldi相控阵馈源. 首先结合Wheeler提出的连续电流片概念及等效电路对紧耦合原理进行理论分析, 然后针对Vivaldi天线分析了阵元间的强耦合能够有效拓展天线的工作带宽. 在此基础上设计了一款宽带Vivaldi相控阵馈源. 馈源阵列由8×9 Vivaldi天线阵元组成, 该阵列的工作带宽为2-8GHz, 并且能够在E面和H面均实现±$45^\circ$的扫描特性. 最后对该馈源阵列进行了样机加工和测试, 测试结果与仿真结果具有较好的一致性.     

Constraining the dark matter annihilation cross-section with Cherenkov telescope observations of dwarf galaxies

The presence of dark matter in the halo of our Galaxy could be revealed through indirect detection of its annihilation products. Dark matter annihilation is one possible interpretation of the recently measured excesses in positron and electron fluxes, provided that boost factors of the order of 10³ or more are taken into account. Such boost factors are actually achievable through the velocity-dependent Sommerfeld enhancement of the annihilation cross-section. Here, we study the expected γ-ray flux from two local dwarf galaxies for which Cherenkov telescope measurements are available, namely Draco and Sagittarius. We use recent stellar kinematical measurements to model the dark matter haloes of the dwarfs and the results of numerical simulations to model the presence of an associated population of subhaloes. We incorporate the Sommerfeld enhancement of the annihilation cross-section. We compare our predictions with the observations of Draco and Sagittarius performed by MAGIC and HESS, respectively, and derive exclusion limits on the effective annihilation cross-section. We also study the sensitivities of Fermi and of the future Cherenkov telescope array to cross-section enhancements. We find that the boost factor due to the Sommerfeld enhancement is already constrained by the MAGIC and HESS data, with enhancements greater than ∼10⁴ being excluded.     

Multitransition study and new detections of class II methanol masers

We have used the ATNF Mopra antenna and the SEST antenna to search in the directions of several class II methanol maser sources for emission from six methanol transitions in the frequency range 85–115 GHz. The transitions were selected from excitation studies as potential maser candidates. Methanol emission at one or more frequencies was detected from five of the maser sources, as well as from Orion KL. Although the lines are weak, we find evidence of maser origin for three new lines in G345.01+1.79, and possibly one new line in G9.62+0.20.
The observations, together with published maser observations at other frequencies, are compared with methanol maser modelling for G345.01+1.79 and NGC 6334F. We find that the majority of observations in both sources are consistent with a warm dust (175 K) pumping model at hydrogen density ∼10⁶ cm⁻³ and methanol column density ∼ 5×10¹⁷ cm⁻². The substantial differences between the maser spectra in the two sources can be attributed to the geometry of the maser region.     

乌站25m射电望远镜天线效率自动测量的软件实现

经常测量天线参数对于改进天线性能以及联测和单天线观测的数据处理都是至关重要的。以前的记录仪手工测量方式,非常繁琐和低效率,不利于对测量结果进行有效的统一管理和深入分析。根据天线效率的测量为例,在PC和Windows2000/XP软硬件平台下统一编程,集成实现天线参数测量的自动化、操作的人性化以及数据分析和曲线拟合的可视化。这将大大降低人工,提高测量效率,更好地保证天线的可靠、高精度的运行以及观测数据的处理。     

The QUaD experiment

QUaD is a 31 pixel array of polarization sensitive bolometer pairs coupled to a 2.6 m Cassegrain radio telescope. The telescope is attached to the mount originally built for the DASI experiment and located at the South Pole. The telescope system is described along with details of instrumental characterization studies which we have performed. A first season of CMB observations is complete and the second season underway. Details of the current status of these observations and their analysis are presented.     

Antenna performance analysis for decameter solar radio observations

Decameter wavelength radio emission is finely structured in solar bursts. For their research it is very important to use a sufficient sensitivity of antenna systems. In this paper we study an influence of the radiotelescope‐antenna effective area on the results of decameter solar radio observations. For this purpose we compared the solar bursts received by the array of 720 ground‐based dipoles and the single dipole of the radiotelescope UTR‐2. It is shown that a larger effective area of the ground‐based antenna allows us to measure a weaker solar emission and to distinguish a fine structure of strong solar events. This feature has been also verified by simultaneous ground‐ and space‐based observations in the overlapping frequency range (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experiments on the dish verification antenna china for the SKA

The Square Kilometre Array (SKA) is expected to become the world’s most powerful radio telescope at meter and centimeter wavelength in the coming decades. The construction of SKA will be divided into two phases. The first phase (SKA1), scheduled for completion in 2023, will construct 10 % of the whole collecting area. The second phase (SKA2) will build the rest 90 % collecting area. The SKA1 consists of several types of arrays including SKA1-low and SKA1-mid. The latter is a dish array consisting of ~200 medium-size antennas. The integrated dish array in SKA2 will expand to 2500 dishes, spreading 3000 kilometers across the southern part of Africa. The demanding specifications and enormous number of the SKA dish raise challenges in the dish development such as mass production with high performance at low cost, quick installation and high reliability. Dish Verification Antenna China (DVA-C) was built as one of three initial prototypes. A novel single-piece panel reflector made of carbon fiber reinforced polymer (CFRP) was adopted. In this study, an L-band receiver is installed to make DVA-C a complete system for experiments on antenna performance test and preliminary observations. The performance of DVA-C including the system noise temperature, pointing accuracy, antenna pattern, and aperture efficiency has been tested. Preliminary observations such as pulsars and HI are then conducted, which indicates that the DVA-C can not only serve as an educational instrument and key technology test bed, but also be applied for scientific work such as pulsar timing, all-sky HI survey, multi-frequency monitoring of variable sources etc.     

Submillimetre-wave gravitational lenses and cosmology

One of the most direct routes for investigating the geometry of the Universe is provided by the numbers of strongly magnified gravitationally lensed galaxies as compared with those that are either weakly magnified or de-magnified. In the submillimetre waveband the relative abundance of strongly lensed galaxies is expected to be larger as compared with the optical or radio wavebands, both in the field and in clusters of galaxies. The predicted numbers depend on the properties of the population of faint galaxies in the submillimetre waveband, which was formerly very uncertain; however, recent observations of lensing clusters have reduced this uncertainty significantly and confirm that a large sample of galaxy–galaxy lenses could be detected and investigated using forthcoming facilities, including the FIRST and Planck Surveyor space missions and a large ground-based millimetre/submillimetre-wave interferometer array (MIA). We discuss how this sample could be used to impose limits on the values of cosmological parameters and the total density and form of evolution of the mass distribution of bound structures, even in the absence of detailed lens modelling for individual members of the sample. The effects of different world models on the form of the magnification bias expected in sensitive submillimetre-wave observations of clusters are also discussed, because an MIA could resolve and investigate images in clusters in detail.     

H I observations of galaxies behind the Milky Way in the Puppis region

We report 21-cm H  i line observations of 161 galaxies located behind the Milky Way, in the Puppis region. The observations have been carried out with the Nançay radio telescope, resulting in 101 detections. Most of the galaxies observed appear in the ESO catalogue, and present apparent diameters larger than 1.6 arcmin. We show that the detection rate is strongly related to the apparent diameter; it is as high as 76 per cent for diameters larger than 1.6 arcmin. Half of the non-detections result, in fact, from an insufficient velocity coverage. Global parameters of the detected galaxies are computed, after a careful discussion of the correction for Galactic absorption. Our H  I data are then compared with those obtained by Kraan-Korteweg & Huchtmeier with the Effelsberg radio telescope for 20 galaxies observed in common: the agreement is excellent, implying respective uncertainties on recession velocities and on H  I fluxes lower than 10 km s⁻¹ and 2 Jy km s⁻¹ on average. Finally, we find that the detected galaxies follow well the correlation between the optical linear diameter and the H  I mass found by Haynes & Giovanelli. This result shows that our diameter corrections for Galactic absorption A_B are quite good, except for eight objects which are heavily obscured ( A_B 2.3), or have a very small diameter, lower than 0.5 arcmin.     

A radio and optical study of Molonglo radio sources

We present multi-wavelength radio observations with the Very Large Array, and narrow- and broad-band optical observations with the 2.5-m telescope at the Las Campanas Observatory, of a well-defined sample of high-luminosity Fanaroff–Riley class II radio galaxies and quasars, selected from the Molonglo Reference Catalogue 1-Jy sample. These observations were carried out as part of a programme to investigate the effects of orientation and environment on some of the observed properties of these sources. We examine the dependence of the Liu–Pooley relationship, which shows that radio lobes with flatter radio spectra are less depolarized, on size, identification and redshift, and show that it is significantly stronger for smaller sources, with the strength of the relationship being similar for both radio galaxies and quasars. In addition to Doppler effects, there appear to be intrinsic differences between the lobes on opposite sides. We discuss the asymmetry in brightness and location of the hotspots, and present estimates of the ages and velocities from matched-resolution observations in the L and C bands. Narrow- and broad-band optical images of some of these sources were made to study their environments and correlate with the symmetry parameters. An extended emission-line region is seen in a quasar, and in four of the objects possible companion galaxies are seen close to the radio axis.     

The Ground-based Experiment of the Prototype of Planetary (& Lunar) Rotation Monitor Telescope

The scientific objective of the Planetary (& Lunar) Rotation Monitor (PRM) telescope is to study the terrestrial planet's (the Moon's) rotation and its interior structure and physics by in-situ observation. In order to verify the brand new principle of observations and the data processing method, the prototype of the telescope is designed and manufactured. The prototype's optical system consists of a commercial telescope and trihedron mirror set placed at the entrance of its light path to realize the capability of observing three fields of view (FOVs) simultaneously. The ground-based validation observation began in 2017, and the images containing the stars from three FOVs were achieved. Star images from different FOVs are initially mixed together, but they can be classified into the three FOVs respectively by calculating the displacement of star images on the CCD plate between two adjacent exposures, to make the observational effect be identical with three independent observations of the three FOVs respectively. After image processing, from the orientation variation of the three FOVs simultaneously in space due to the Earth's rotation, the direction of the rotation axis of the Earth in space can be derived. Its deviation from the theoretical value is about 1${}^{″}$ in average, indicating that the working principle and data processing method are effective. The main errors in observations are discussed, including the atmospheric refraction, the thermal deformation of the commercial telescope tube, the low optical resolution caused by the short focal length, the optical aberration in the multi-FOV observation, etc. It is indicated that the spatial resolution of the telescope can be enhanced with a longer focal length, and the observational reliability can be improved by optimizing the thermal deformation control. Improving the optical design in the simultaneous observation of multiple FOVs will also be helpful to the accuracy enhancement.