Pseudotachylytes from the Koktokay-Ertai fault zone, Xinjiang, China, and their seismogeologic implications

Multi-period of pseudotachylytes of variable occurrences and shapes are widely outcropped in Haizikou and Mukurasen sections of the Koktokay-Ertai fault zone. They consist of clasts and matrix. The clasts comprise fine fragments of the host rock (mylonite) and quartz grains, while the matrix consists of cryptocrystalline and glassy materials which contain fibrous and radial microlites. The chemical compositions of the pseudotachylytes resemble those of the host rocks. Their features indicate that the pseudotachylytes were formed from local melting of the mylonites during the rapid movement of the fault, and that the formation depth was 10—12 km. The geologic event that produced pseudotachylytes is believed to be paleoearthquake. Project supported by the Joint Earthquake Science Foundation.     

The structural characteristics,age of origin,and tectonic attribute of the Erguna Fault,NE China

The Erguna Fault runs along the east bank of the Erguna River in NE China and is a large-scale ductile shear zone comprising granitic mylonites. This paper reports on the geometry, kinematic indicators, and 40Ar/39 Ar biotite ages of the granitic mylonites, to constrain the structural characteristics, forming age, and tectonic attribute of the Erguna ductile shear zone. The zone strikes NE and records a top-to-the-NW sense of shear. A mylonitic foliation and stretching lineation are well developed in the mylonites, which are classified as S-L tectonites. Logarithmic flinn parameters(1.18–2.35) indicate elongate strain which approximates to plane strain. Kinematic vorticity numbers are 0.42–0.92 and 0.48–0.94, based on the polar Mohr diagram and the oblique foliation in quartz ribbons, respectively, suggesting that the ductile shear zone formed under general shear, or a combination of simple and pure shear. According to finite strain and kinematic vorticity analyses, the Erguna Fault is a lengthening-thinning ductile shear zone that formed by extension. The deformation behavior of minerals in the mylonites indicates that the fault was the site of three stages of deformation: an initial stage of middle- to deep-level, high-temperature shear, a post-stress recovery phase of high-temperature static recrystallization, and a final phase of low-temperature uplift and cooling. The 40Ar/39 Ar plateau ages of biotite from the granitic mylonites are 106.16 ± 0.79 and 111.55 ± 0.67 Ma, which constrain the timing of low-temperature uplift and cooling but are younger than the ages of metamorphic core complexes(MCCs) in the Transbaikalia-northeast Mongolia region. Using measured geological sections, microtectonics, estimates of finite strain and kinematic vorticity, and regional correlations and geochronology, we conclude that the Erguna Fault is an Early Cretaceous, NNE-trending, large-scale, sub-horizontal, and extensional ductile shear zone. It shares a similar tectonic background with the MCCs, volcanic fault basins, and large and super-large volcanic-hydrothermal deposits in Transbaikalia-northeast Mongolia and the western Great Khingan Mountains, all of which are the result of overthickened crust that gravitationally collapsed and extended in the Early Cretaceous after plate collision along the present-day Sino-Russia-Mongolia border tract.     

Ductile deformation and regional strain field in the southern segment of the Tancheng-Lujiang fault zone,eastern China

Studies in a segment of the Tancheng-Lujiang fault zone show that it is a major transcurrent ductile shear zone with a considerable sinistral displacement. The formations (PtT₁₊₂) at depths of 5 to 15 km may have cropped out in this area during subsequent erosion. Many ductilely deformed structures are in it. The deformed zone was formed during the Indo-Sinian orogeny. On the basis of measurements and analyses of many deformed pebbles within the shear zone, it is suggested that the deformation in the zone studied may be catagorized as a variation of simple shear and plane strain with a constant volume. The intensely deformed belt is generally 40 to 50 km wide, with the average strain ratio 27.68 and the maximum greater than 87.37. From analysis of elongation strain, we estimate that the deformed belt has been elongated by 164.23 km and narrowed by 222.5 km. The internal belt was formed by a high shear strain , calculated to be more than 11.34. The deformed belt is associated with syntectonic dynamothermal metamorphism, represented by greenschist facies and retrogressive metamorphism on previous amphibolite facies.     

北京北石城断层带与河防口断层带断层岩石显微构造研究

本文论述了糜棱岩类与碎裂岩类的变形特征,它们各自代表了不同的成因机制,反映了断层带经历过早期韧性剪切和后期脆性破裂的发育历史。根据断层岩石的显微构造特征,估算了断层带发育过程中两个阶段的温度、压力、应变速率、差异应力大小和方位,并讨论了韧性剪切带、地壳中弹塑性过渡带与大陆地震多发层之间的关系     

龙门山断裂带假玄武玻璃特征及断层弱化机制的探讨

与断层相关的假玄武玻璃被认为是地震化石,记录了地震发生过程和断裂机制的重要信息,对认识断层地震活动性具有重要意义.本文综合地表露头及汶川科钻（WFSD-1、WFSD-2）岩心研究,对映秀—北川断裂带南段彭灌杂岩中发育的假玄武玻璃进行详细的结构、构造及矿物成分分析.这些假玄武玻璃以断层脉和单个/网状贯入脉的形式产出,厚度由几毫米到数十厘米不等,与碎裂岩和超碎裂岩相伴生.显微结构观察发现假玄武玻璃中发育大量熔融特征构造,如港湾状熔蚀边、蜂窝状气孔构造、黏滞性流动构造以及针状、球粒状、羽状、纤维状、粒状等多种形态的微晶及微晶集合体,表明其为断层滑动摩擦熔融的产物,指示摩擦熔融润滑是断层滑动过程中最主要的弱化机制.同时热增压和机械润滑机制可能存在于断层滑动的不同阶段.此外,从野外和显微镜下都观察到假玄武玻璃脉具有浅灰、深灰、浅褐、棕褐色及黑色等不同的颜色,可能代表着不同程度的脱玻化作用,并且不同颜色有相互穿插交切关系,可能指示存在多期假玄武玻璃,也就是说,产生假玄武玻璃的大地震事件沿映秀—北川断裂带重复发生.最近的研究认为这些假玄武玻璃形成于晚三叠世时期地下~10—15 km深度.结合须家河组地层中发育的厚层断层泥和角砾岩,~180—280 m宽的映秀—北川断裂岩带是断裂长期活动演化的产物.作为龙门山地区最陡峭的地形边界,映秀—北川断裂带长期地震活动造成的地壳缩短加厚可能是龙门山快速隆升的主要原因.     

Metamorphic,deformation, fluids and geological significance of low-temperature retrograde mylonites of Diancangshan metamorphic massif along Ailaoshan-Red River strike-slip fault zone,Yunnan, China

Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especially since the late Oligocene it widely suffered high-temperature ductile shear deformation and exhumation of the metamorphic rocks from the deep crust to the shallow surface. Based on the previous research and geological field work, this paper presents a detailed study on deformation and metamorphism, and exhumation of deep metamorphic rocks within the Diancangshan metamorphic massif, especially focusing on the low-temperature overprinted retrogression metamorphism and deformation of mylonitic rocks. With the combinated experimental techniques of optical microscope, electron backscatter diffraction attachmented on field-emission scanning electron microscopy and cathodoluminescence, our contribution reports the microstructure, lattice preferred orientations of the deformed minerals, and the changes of mineral composition phases of the superposition low-temperature retrograde mylonites. All these results indicate that: (1) Diancangshan deep metamorphic rock has experienced early high-temperature left-lateral shear deformation and late extension with rapid exhumation, the low-temperature retrogression metamorphism and deformation overprinted the high-temperature metamorphism, and the high-temperature microstructure and texture are in part or entirely altered by subsequent low-temperature shearing; (2) the superposition of low-temperature deformation-metamorphism occurs at the ductile-brittle transition; and (3) the fluid is quite active during the syn-tectonic shearing overprinted low-temperature deformation and metamorphism. The dynamic recrystallization and/or fractures to micro-fractures result in the strongly fine-grained of the main minerals, and present strain localization in micro-domians, such as micro-shear zones in the mylonites. It is often accompanied by the decrease of rock strength and finally influences the rheology of the whole rock during further deformation and exhumation of the Diancangshan massif.     

北京地区碳酸盐糜棱岩和碳酸盐假熔岩碳氧同位素组成的初步研究

北京地区部分碳酸盐糜棱岩和碳酸盐假熔岩碳氧同位素组成的测试结果表明,碳酸盐岩在发生塑性变形时其δ13C、δ18O值均有不同程度的降低。同位素证据表明,碳酸盐糜棱岩的形成温度较低,并具有缓慢冷却的生成环境;碳酸盐假熔岩具有高温淬冷的同位素地球化学特征,它的形成可能与发震断层的迅速破裂过程有关。研究断层面附近产出的碳酸盐岩的稳定同位素组成对确认古地震事件是有意义的     

红河断裂带中南段糜棱岩分形特征及主要流变参数的估算

红河断裂带是一条经历了长期构造演化的块间构造变形带,该断裂的西南侧出露一套经韧性剪切形成的糜棱岩。研究区糜棱岩宏观上发育多种变形组构,如构造面理、线理、S-C组构等。微观变形特征有云母鱼、长石碎斑、长石和角闪石压扁拉长、碎斑旋转形成的压力影等;尤其是石英普遍变形,其特征有波状消光、核幔构造、动态重结晶、单颗粒压扁拉长及石英条带等;石英动态重结晶新颗粒尤其发育,重结晶的新颗粒边界具有锯齿状或港湾状等不同的微观特征,这些不同的特征记录了变形时的温压环境和流变速率。石英新颗粒分维几何统计分析表明:研究区石英动态重结晶颗粒边界形态具有自相似性,表现出分形特征。分维数值为1.150～1.180,变形温度大约500℃,同构造变质环境属高绿片岩相-低角闪岩相;初步估算应变速率可能低于10-8.4s-1,根据石英重结晶的粒径估算变形古应力为42.0～58.0MPa     

Earthquakes in the ductile regime?

Pseudotachylytes from a crustal scale shear zone in Central Australia have developed in a cyclical manner: once developed, an individual pseudotachylyte is deformed in a ductile manner, only to be overprinted at a later stage by a new generation of pseudotachylytes. Such cyclic generation and deformation of pseudotachylyte has been interpreted in the past as representing conditions at the brittleductile transition; a different interpretation, however, is presented here. It is proposed that psuedotachylytes and associated ultramylonites can develop entirely within the ductile regime as ductile instabilities. Such instabilities are different in nature to those previously discussed at length in the geophysical literature but are identical in principle with the instabilities that develop for velocity-weakening frictional behavior in spring-slider systems. At a given strain rate a critical temperature,T _c, is defined, at which the transient work hardening equals the product of stress relaxation due to a thermal fluctuation and the heat generated by shearing. A necessary condition for ductile instability at a given strain rate is that the temperature is belowT _c; then the rate of change of stress with respect to strain is negative. An additional requirement is that this rate of change exceeds, in magnitude, the effective elastic stiffness of the loading system. Ductile instabilities are marginally possible at geological strain rates in quartzites but are possible at mid-crustal temperatures in other rock types. On the basis of these observations a new interpretation is presented for the base of the seismogenic zone in crustal regions.     

Seismic measurements of the internal properties of fault zones

The internal properties within and adjacent to fault zones are reviewed, principally on the basis of laboratory, borehole, and seismic refraction and reflection data. The deformation of rocks by faulting ranges from intragrain microcracking to severe alteration. Saturated microcracked and mildly fractured rocks do not exhibit a significant reduction in velocity, but, from borehole measurements, densely fractured rocks do show significantly reduced velocities, the amount of reduction generally proportional to the fracture density. Highly fractured rock and thick fault gouge along the creeping portion of the San Andreas fault are evidenced by a pronounced seismic low-velocity zone (LVZ), which is either very thin or absent along locked portions of the fault. Thus there is a correlation between fault slip behavior and seismic velocity structure within the fault zone; high pore pressure within the pronounced LVZ may be conductive to fault creep. Deep seismic reflection data indicate that crustal faults sometimes extend through the entire crust. Models of these data and geologic evidence are consistent with a composition of deep faults consisting of highly foliated, seismically anisotropic mylonites.     

Microstructural analysis of faulting in quartzite,Assynt, NW Scotland: Implications for fault zone evolution

Macroscopic fracture arrays, microstructures and interpreted deformation mechanisms are used to assess the development of a minor reverse fault (backthrust) in quartzite from the Moine Thrust Zone, Assynt, NW Scotland. Fracturing dominates the faulting via the progression: intragranular extension microcracks; transgranular, cataclasite absent extension fractures; through-going, cataclasite filled shear microfaults, within which fracturing and particulate flow operate. However, both diffusive mass transfer (DMT) and intracrystalline plasticity (low temperature plasticity, LTP) processes also contribute to the fault zone deformation and lead to distinct associations of deformation mechanisms (e.g., DMT-fracture and LTP-fracture or low-temperature ductile fracture, LTDF). Over a large range of scales the fault zone consists of blocks of relatively intact rock separated by narrow zones of intense deformation where fracture processes dominate. The populations of fragments/blocks of different sizes in the fault zone have a power-law relationship which is related to the dimension of the fault zone. These observations are used to develop a general model for fault zone evolution based on the distribution of deformation features as a function of either time or space. A systematic variation in the deformation rate: time histories is recognised, associated with different positions within the fault zone. Thus, the fault zone preserves elements of the birth, life and death sequences associated with the displacement history and strain accommodation.Dedicated to the memory of Will Ramsbotham (1967–93).     

内蒙古大青山地区地质构造与成矿

内蒙古大青山地区的临河-集宁断裂带是华北板块北缘的一条重要断裂带。它主要由韧性剪切带、韧脆性剪切带和推覆构造等构成。推覆构造自南向北可分为叠瓦逆冲推覆构造带、紧闭褶皱-逆冲断层变形带、宽缓褶皱一断层转折褶皱带、滑脱褶皱一断层传播褶皱带等4个变形带。断裂带从韧性到脆性表示了其出露深度不同。并有由南到北活动强度逐渐减弱的趋势。该区主要分布有以金为主的多金属矿床和以煤、大理岩为主的非金属矿床。区内金多金属矿床多与韧性剪切带有关,断裂构造为金属矿床的形成提供了空间,也是成矿物质的通道。研究指出了该地区的找矿前景与方向。     

沂沭断裂带中段基底韧性剪切带

在沂沭断裂带中段的泰山群结晶基底中,存在着一系列北东、北北东走向的左行韧性剪切带。对其中发育糜棱岩的韧性剪切带的结构构造、应变测量、变形岩石的显微构造、显微组构以及长石粒度和含量的变化规律进行了观测分析。讨论了韧性剪切带的变形条件和机制。及其递进发展的趋势。指出基底韧性剪切带是沂沭断裂带元古宙时期断裂活动时在地壳较深层次上形成的构造表象。在此基础上,讨论了地壳不同层次上的断裂变形及断裂岩石的综合分类问题     

丽江—小金河断裂带现今断层运动特征

本文利用GPS观测对丽江—小金河断裂带的现今断层运动和变形状态进行了分析和探讨.丽江—小金河断裂带两侧地块地壳变形差异显著,GPS速度剖面结果显示断裂带两侧存在地壳变形不连续现象;进一步以GPS速度场为约束,基于负位错模型反演的丽江—小金河断裂带的断层闭锁空间分布结果显示,以木里为界,北东段断层强闭锁从地表向深部延伸至15km左右,西南段断层闭锁程度较高的区域位于5～15km范围内,浅层表现为弱闭锁的状态;滑动亏损速率结果显示,两闭锁段的滑动亏损速率相差近4mm·a~(-1),说明丽江—小金河断裂带西南段的背景滑动速率明显高于北东段.基于数值模拟分析了西南段浅层蠕滑运动对周边断层的影响,结果表明西南段的浅层左旋滑动对北东段闭锁区和西南段深部强闭锁区均为正影响.     

龙门山断裂带大地震孕震环境的岩石磁学证据

地震断裂带的孕震环境对于研究地震的发生至关重要.本文以汶川地震断裂带科学钻探2号（WFSD-2）钻孔岩心中的假玄武玻璃、碎裂岩及其围岩为研究对象,通过岩石磁学测试,并结合显微结构观察探讨龙门山断裂带大地震的孕震环境.WFSD-2岩心碎裂岩中的假玄武玻璃是龙门山断裂带曾经发生过大地震活动的岩石学证据,假玄武玻璃具有高磁化率特征,而碎裂岩的磁化率值与围岩相似,假玄武玻璃中的新生磁铁矿是其高磁化率值异常的重要原因之一.假玄武玻璃中较少量的新生磁铁矿暗示了假玄武玻璃的生成环境为含氧量较低的高温还原环境.大地震断裂的摩擦热是改变龙门山断裂带中假玄武玻璃岩石磁学特征的主导因素,流体作用较弱.无高磁化率异常的碎裂岩经历的温度小于300℃,推测假玄武玻璃的生成深度较深.WFSD-2岩心中20余层假玄武玻璃脉体证明映秀—北川断裂带是一条长期活跃的断裂带,龙门山断裂带上曾经发生了多次大地震断裂活动,这些大地震可能发生在深度较大、流体作用较弱的还原性孕震环境中.     

Microcosmic analysis of ductile shearing zones of coal seams of brittle deformation domain in superficial lithosphere

For many years, the study on ductile shearing zones mainly focuses on the strain analysis and the characteristics of microcosmic structure of felsic duc-tile shearing zones in deep layers (8—10 km). Discus-sions on the process of the development of small-type and mini-size ductile shearing zones have been re-ported in recent years[1,2]. 揇uctile deformations in brittle deformation擺3] and 揵rittle deformations in ductile deformation擺4] are rather a familiar phenome-non in nature. Researchin…     

两类糜棱岩的特征、成因及其地质意义

笔者依据野外实际观察,基于岩石的物理和力学性质,将糜棱岩分为三类:第一类是浅成的、低温的脆性变形的糜棱岩,即B型;第二类是中深成的、中高温的和韧性的糜棱岩,即D型;第三类是深成的、高温的和粘性的糜棱岩,即V型。鉴于目前的研究程度,本文只讨论前两类     

1906年新疆玛纳斯大震区的多层次逆冲构造与深部结构

通过对天山北麓 190 6年玛纳斯 7 7级地震区的浅层地震探测资料、石油地震反射剖面、二维电性结构剖面、深地震反射剖面的研究 ,发现玛纳斯地震区多层次活动构造系统的根带 ,它通过脆 -韧转换带与天山活动构造块体内上地壳中的低速、高导层连为一体。低速、高导层可能是天山地壳内正在活动的韧性剪切带 ,而齐古逆断裂 -褶皱带下的脆 -韧转换带是连接深部活动韧性剪切带与地壳浅部脆性破裂的枢纽 ,也是现今孕育和发生大地震的重要构造部位。 190 6年玛纳斯地震发生在脆韧转换带的底部 ,地震区的活动逆断裂和褶皱只是部分记录了深部韧性剪切带活动的信息     

High resolution tomography of the Tanlu fault zone near Hefei with passive seismic and magnetotelluric linear array data

As the largest fault trending NNE-SSW to NE-SW in the eastern Eurasia Continent,the Tanlu fault zone(TLFZ)extends over 2,400 km within China,roughly from Wuxue,Hubei Province,to Russia.Since the Quaternary period,the TLFZ has been an earthquake-prone area in eastern China where several major earthquakes resulted by tectonic compression occurred,causing tremendous casualties and significant economic losses.Many studies on different segments of the TLFZ have been carried out in the past few decades.However,numerous key questions regarding the fault zone remain unanswered due to a lack of clear subsurface characterization and fault delineation.In this study,we present high-resolution tomographic results across the TLFZ to the east of Hefei,where one 22-km-long passive seismic array with densely spaced short-period nodes,and a 24-km-long magnetotelluric array were deployed adjacent to each other.We find the velocity and resistivity variations are highly consistent with known surface geology.Sharp property contrasts in both the seismic shear wave velocity and electrical resistivity profiles clearly delineate the Tanlu F1 fault(TLF-1)near Hefei.More interestingly,an upwelling with distinct high velocity is imaged within the Hefei Basin to the west of the TLF-1,whereas a slanted block with low-velocity and low-resistivity seems to cut into or thrust upon the high-grade to low-grade middle-pressure rocks in the Zhangbaling uplift right below the Tanlu F2 ductile shear fault(TLF-2).The presented results show a new approach to characterize deep subsurface structure of the TLFZ beyond 2-km depths using passive data,which it is often difficult for active seismic surveys with refracted and reflected waves to image.     

Genesis of the Hongzhen metamorphic core complex and its tectonic implications

The Hongzhen metamorphic core complex is situated in the Yangtze plate to the east of the Dabie oro- genic belt. Its ductile detachment zone in the foot wall overprints on the metamorphic complex of the Proterozoic Dongling Group. The present profile of the ductile shear zone with consistent SW-dipping mineral elongation lineation shows antiform and reversed S-shape from northeast to southwest respectively. Exposure structures, microstructures and quartz C-axis fabric all indicate top-to-SW movement for the ductile shear zone. Recrystallisation types of quartz and feldspar in the mylonites demonstrate that the shear zone was developed under the amphibolite facies condition and at mid-crust levels. The metamorphic core complex formed in the Early Cretaceous with a muscovite plateau age of 124.8±1.2 Ma. Regional NE-SW extension along a SW-dipping, gentle detachment zone was responsible for formation of the core complex. Intrusion of the Hongzhen granite with a biotite plateau age of 124.8±1.2 Ma rendered the ductile shear zone curved, uplifted and final localization of the core complex. The Hongzhen metamorphic core complex suggests that the Early Cretaceous magma- tism in this region took place under the condition of regional extension and the eastern Yangtze plate also experienced lithospheric thinning.