黔东南地区褶皱构造样式及其断层突破模式

黔东南地区发育隔槽式褶皱组合和逆冲断层.通过对褶皱和地层的平面展布、断层的产状和性质以及滑脱层的分析, 结合典型地震剖面解释和平衡剖面恢复, 对黔东南地区构造特征及其成因进行了探讨.结果表明, 隔槽式褶皱的发育不仅与滑脱深度和剥蚀差异有关, 而且与逆冲断层的推覆距离、逆冲断层的产状、断坪断坡长度比、断层突破方式和多层次滑脱等方面存在着密切联系.结合区域构造演化和推覆距离的制约, 建立了黔东南地区的隔槽式褶皱构造样式的几何学和运动学模型, 确定其主要影响因素是断坪断坡长度比较小、多种方式断层突破和多层次滑脱.      

黔南地区古生代正断层对构造特征的制约

黔南地区发育东西向的古生代正断层以及南北向的中、新生代逆冲断层和褶皱。通过对地层、褶皱和断层的平面展布、野外地质调查以及地震剖面的解释,结合雪峰隆起的逆冲推覆特征,研究黔南地区古生代正断层对构造特征的制约作用。研究结果表明东西向的古生代正断层在中、新生代的构造变形过程中起构造转换带的作用。通过建立区内构造转换带的几何学模型,对地震线上的构造变形特征进行了解释。在构造转换带（正断层）附近,断层上盘逆冲推覆不明显;在远离断层处,逆冲断层和与断层相关的褶皱发育。随着距离断层面越来越远,构造转换带（正断层）下盘地层的逆冲推覆特征逐渐消失。     

库车坳陷-南天山盆山过渡带的收缩构造变形模式

用地面露头、地震和CEMP(连续电磁剖面法)勘探资料揭示的库车坳陷-南天山盆山过渡带构造变形特征难以用经典的“A型俯冲”冲断褶皱楔变形模型来解释,因而文中提出一种“分层变形、垂向叠置”的“非俯冲”收缩构造解释模型。所谓分层变形是指受古近系膏盐岩层和侏罗系含煤地层等软弱岩层分隔,不同深度的岩层发育不同的收缩变形样式;所谓垂向叠置是指不同层次的强变形带在垂向上叠置,不存在区域性大位移的拆离断层。位于盐岩层之上的新生界以滑脱褶皱变形为主,而盐下层的中生界沉积层及盆地基底则以收缩断裂变形为主。浅部的滑脱褶皱表现出紧闭背斜和宽缓向斜组合,背斜具有不对称形态,其核部在古近系盐岩层或侏罗系含煤地层中滑脱,可在陡翼发育破冲断层或缓翼发育顺层滑脱逆冲断层。深层断裂变形以向山脉倾斜的高角度基底卷入逆冲断层为主干断层,断层上盘形成冲断隆起,次级断层相对较少,下盘则发育一系列同向倾斜的次级逆冲断层构成楔状叠瓦冲断构造。深层断层向上延伸在古近系盐岩层中尖灭,部分次级断层向下延伸并在侏罗系含煤地层中或盆地基底面滑脱,但是主干逆冲断层高角度切入基底,向上则对应于浅层背斜的核部。基底卷入的高角度主干逆冲断层可能利用了先存正断层发生反转位移,并成为控制局部构造变形的主要构造要素。天山上升引起的垂直剪切作用是导致库车坳陷-南天山盆山过渡带发育高角度逆冲断层或促成先存正断层的反转的可能原因。     

库车坳陷东部断裂特征与构造演化

山前逆冲褶皱带的几何学和运动学研究属于构造地质学前沿课题,也是全球山前盆地油气勘探开发所关注的问题.综合二维地震剖面、钻测井数据、地质填图资料,建立了库车坳陷东部两类断层几何学和运动学模型,绘制了吐孜洛克断层和东秋里塔格断层断距分布图以及东秋里塔格背斜位移缩短量分布图.研究资料表明库车坳陷东部发育两种类型断层,古近纪发育高角度逆冲断层,造成山前基底抬升,白垩系-古近系被剥蚀;上新世发育低角度逆冲断层,引发库车坳陷中生界-新生界变形,形成盆地腹部隐伏的叠瓦状逆冲构造.      

连阳煤田可能存在推覆构造

沿连阳煤田西侧、总体呈南北走向、往东倾斜的连县－寨岗逆冲断层将中泥盆统至下二叠统由东往西逆冲于上二叠统至中三叠统之上；逆冲断层的上盘和下盘在断裂、褶皱构造特征、沉积建造、地球物理场等方面都存在差异；据此推断，连阳煤田可能存在推覆构造而不仅是简单的复向斜构造。Ｆ２断层以东为推覆系统，以西为下伏系统，整个煤田显示出以断坪为主，断坪和断坡闪替出现的台阶式断裂构造特征。     

华南地块雪峰山中生代板内造山带构造样式及其形成机制

华南大地构造核心问题之一是江南—雪峰山造山带的属性。在前人工作基础上,对横切雪峰山造山带的地质剖面进行了详细的区域地质、构造变形和部分重点区段地震反射剖面深部构造解释,划分出5个大地构造单元:(1)湘中复合逆冲构造带。该带位处雪峰山造山带东部,以龙山复合构造穹隆等为代表,是近EW向加里东造山带与NE向燕山造山带复合叠加的结果;其中燕山期构造样式总体为倾向SE逆冲断层控制的尖棱背斜构造。(2)雪峰山厚皮逆冲构造带。该带西以大庸逆冲断裂为界,带内板溪群浅变质褶皱基底大面积出露,总体发育指向NW的断层-褶皱组合。断坪-断坡式逆冲断层从板溪群内部薄弱层发育,向浅部产状明显变陡,并导致新元古界板溪群逆冲于古生界之上,控制了沅麻等中生代盆地的形成,沿断坡形成紧闭背斜和沿断坪形成宽缓向斜;表明其为典型的断层相关褶皱。断层褶皱组合与地表剥蚀共同作用,形成飞来峰和构造窗。(3)以梵净山构造穹隆为代表的梵净山—走马构造穹隆带。该带呈NE向长垣状,核部出露新元古界下部梵净山群。断坪-断坡式逆冲断层深切梵净山群,在断层上盘形成不对称箱状背斜。因此总体为典型的厚皮逆冲作用下的断层相关褶皱。(4)隔槽式逆冲构造带。此带主要发育一系列轴向NE的箱状背斜和尖棱向斜。箱状背斜核部为寒武系,向深部卷入震旦系—板溪群,形成基底卷入的断层-褶皱组合,其浅部形成叠瓦状逆冲断层-褶皱组合,从而构成主动双重逆冲构造。(5)华蓥山断裂与齐岳山断裂间的隔档式薄皮构造带。带内以发育尖棱背斜和箱状向斜为特征,是倾向SE断坪-断坡控制下的断展褶皱组合。上述5个构造单元变形区域卷入了上三叠统—下侏罗统,但为上白垩统角度不整合覆盖,表明变形时间为中生代中晚期,并且有从SE向NW渐次变新的趋势。将各构造单元及不同构造层次构造组合联系起来,建立起以断层相关褶皱为基本构造样式,从SE向NW,从深部向浅部发展的雪峰山中生代板内造山带的递进演化运动学新模式。     

江南造山带北部早中生代岳阳—赤壁断褶带构造特征及变形机制研究

早中生代(晚印支-早燕山期)岳阳-赤壁断褶带位于江南造山带与中扬子前陆盆地交界地带.作者对该构造带进行了地表地质调查,以此为基础探讨了构造剖面结构及构造变形动力机制.岳阳-赤壁断褶带自南而北可分为岳阳-临湘基底滑脱-逆冲带,桃花泉-肖家湾盖层滑脱褶皱带,以及赤壁-嘉鱼前陆盆地断-褶-盆构造带.岳阳-临湘基底滑脱-逆冲带自南而北依次有郭镇向斜、官山背斜、临湘倒转向斜和聂市背斜,组成隔槽式褶皱组合.褶皱轴面多向南倾,褶皱变形面为南华系盖层与冷家溪群褶皱基底间的角度不整合面和顺界面的滑脱断裂面.桃花泉-肖家湾盖层滑脱褶皱带主要发育轴面南倾倒转褶皱,褶皱波长较小,卷入地层为南华系-志留系以及上石炭统-中三叠统沉积盖层.赤壁-嘉鱼前陆盆地断-褶-盆构造带以南倾蒲圻断裂(江南断裂)为南部边界,发育T3-J2前陆盆地沉积,带内褶皱与断裂卷入地层包括沉积盖层以及T3-J2地层:南部断裂与褶皱轴面南倾.北部轴面近直立.自南西至北东,研究区内构造线走向由EW向渐变为NEE-NE向.上述构造分带及变形特征反映出自南向北的运动指向,表明岳阳-赤壁断褶带具前陆冲断带构造性质.从断裂相关褶皱理论出发,以地表构造特征为依据,厘定了岳阳-赤壁地质剖面结构并进行了变形动力机制分析,认识如下:①自南而北、自下而上的多个滑脱层及其间的南倾逆断裂或断坡(主要为江南断裂)组成近似台阶状的逆冲断裂系统,从总体上控制了构造块体的滑移、逆冲以及相应的构造格架或变形分区.②郭镇向斜为基底滑脱褶皱,官山背斜具滑脱褶皱和断裂传播褶皱双重成因,聂市背斜为断裂转折褶皱;临湘向斜为受两侧背斜控制的被动向斜,由于弯滑褶皱作用在其两翼沿不整合界面形成滑脱断裂.③岳阳-临湘基底滑脱-逆冲带隔槽式褶皱的形成主要受控于褶皱基底的滑脱和基底整体的水平压缩,其形成机制类似于肿缩式褶皱.最后讨论认为湘东北-鄂东南地区不存在大规模、长距离的逆冲推覆构造.     

桂中坳陷改造期构造样式及其成因

桂中坳陷的构造演化一般划分为原型期和改造期两大阶段。改造期主要属于挤压构造样式,目前的研究还相对比较薄弱。从大地构造动力学背景入手,结合区域地质事件,按照盆地发育世代与造山带演化阶段,综合近期野外地质调查与深层地球物理勘探成果等,分析了改造期挤压构造样式。主要有三大区域性冲褶变形构造系,包括大瑶山逆冲推覆构造系,右江逆冲推覆构造系以及雪峰山隆起南缘重力滑覆构造系。总体上,负向地形多褶皱紧闭,正向地形形成相对宽缓的箱状复式背斜褶皱;深层主要发育有基底断裂卷入引发的冲起构造以及与断层相关的断弯、断展、滑动等褶皱样式,浅层有逆冲推覆、纵弯、叠加等褶皱样式。目前桂中坳陷受到东西两侧剪切、向南拉张的应力作用。     

塔里木巴楚隆起北缘吐木休克楔形基底卷入构造

石油地震资料揭示出塔里木盆地中央巴楚隆起为结晶基底和古生代地层相对隆升区,多数地区缺失中新生界,顶部为第四系陆相碎屑岩不整合覆盖隐伏隆起。在隆起南北两侧构造变形比较强烈,均发育基底卷入的逆冲构造和古生界内逆冲构造。运用断层相关褶皱理论,通过对研究区的二维地震测网解释及钻井标定,综合研究得出巴楚隆起北侧吐木休克卷入基底逆冲断层倾向南,向北逆冲,前寒武系基底到早古生代地层被错断。新生代时期的生长地层特征指示基底卷入构造于古近纪、中新世-上新世和更新世均有活动。构造分析表明基底卷入构造于中生代末期还有一次活动,说明吐木休克构造由多期构造运动形成。向北逆冲的吐木休克基底断层和盖层褶皱构造的向南反冲逆冲断层或滑脱断层共同组成基底卷入楔形构造,楔形点同时位于基底和盖层中。盖层构造以中寒武统膏岩为滑动面,向南逆冲,发育断层扩展或滑脱背斜构造。基底断层和盖层滑脱断层在剖面上组成典型的楔形构造几何形态,平面上形成三角形构造。地震剖面综合解释成果图显示,吐木休克弧形逆冲构造东部盖层反冲构造,即基底卷入楔形构造表现较为清楚,向西则表现不太明显,但地震反射波组(地层转折)指示盖层中仍存在这些反冲构造。纵向地震剖面和联络地震剖面均显示出存在该类构造。吐木休克基底卷入断层弧形构造顶部位移最大,盖层变形相对最小;向东西两侧基底断层位移逐渐减小,盖层构造位移相应逐渐增加。研究认为,塔里木巴楚隆起系挤压作用下,刚性地壳发生挠曲而形成的变形区带。     

准噶尔盆地西缘车排子凸起构造演化及断层形成机制

结合区域构造地质背景,采用现今构造静态描述与构造演化过程剖析相结合的研究思路,分析了车排子凸起的几何学与运动学特征,剖析了车排子凸起的构造演化过程,探究了构造演化过程控制下不同类型断层的形成机制.结果表明:车排子凸起之上发育两套断裂系统,即海西印支期形成的断穿石炭系白垩系底的逆断层,喜马拉雅期形成的断穿白垩系、古近系和新近系的正断层.车排子凸起构造演化过程可以划分为强烈隆升剥蚀阶段(C₃J)、缓慢沉降阶段(KE)、局部伸展阶段(NQ)3个阶段,这3个阶段的构造应力背景具有差异性,导致不同阶段形成的断裂体系和地层厚度差异性明显.C₃J时期,车排子凸起处于向东推覆的逆冲褶皱带上,发育向东逆冲的红车断裂带和断穿石炭系白垩系底的逆断层,无地层沉积;KE时期,红车断裂带的右旋压扭活动使车排子凸起处于逆冲楔顶部带,受北东向挤压,先期逆断层有的继承性持续发育,有的停止发育,还有的发育一段时间后停止发育,并形成盲冲断层,地层从南东向北西沉积尖灭;NQ时期,北天山向北强烈挤压隆升的作用使车排子凸起处于前缘隆起带,一些逆断层发生负反转,同时在NQ发育大量正断层,受凸起向南倾作用,地层南厚北薄.     

淮北夹沟—桃山集地区推覆构造研究

本区存在大型中生代推覆构造,所有震旦纪—古生代的沉积岩层都卷入了褶皱和断裂,构造推覆发生在较高构造部位,属脆性变形域,以台阶状逆断层和断层相关褶皱为特征。区内存在若干推覆构造,每个岩片均可分为上盘、下盘和滑动层系三部分,共查明8个滑动岩系。是一种发生在早中生代的盖层推覆,无根褶皱,也是徐宿地区最重要的控煤构造。最后对推覆构造的地球动力学机制进行了讨论。     

Crustal structure of the ancestral northwestern California forearc region from seismic reflection imaging: implications for convergent margin tectonics

Analysis of a suite of 2-D seismic reflection profiles reveals that the northwestern Sacramento Valley and eastern Coast Range foothills, northern California, are underlain by a system of blind, west-dipping thrust faults. Homoclinally east-dipping and folded Mesozoic marine forearc strata exposed along the western valley margin define the forelimbs of northeast-vergent fault-propagation folds developed in the hanging walls of the thrusts. Exhumed coherent blueschists of the accretionary complex and attenuated remnants of the ophiolitic forearc basement presently exposed in the eastern Coast Ranges are in the hanging wall of the blind thrust system, and have been displaced from their roots in the footwall. Deep, east-dipping magnetic reflectors in the footwall of the thrust system may be fragments of sheared, serpentinized and attenuated ophiolitic basement. Restoration of slip on the thrusts suggests that the Coast Range fault, which is the exposed structural contact between the coherent blueschists and attenuated ophiolite, originally dipped east and is associated with the east-dipping magnetic reflectors in the footwall. This interpretation of the reflection data is consistent with previous inferences about the deep structure in this region, and supports a two-stage model for blueschist exposure in the eastern Coast Ranges: (1) blueschist exhumation relative to the forearc basin by attenuation of the ophiolitic basement along the east-dipping Coast Range fault system in late Cretaceous; (2) blueschists, attenuated ophiolite, and forearc strata all were subsequently uplifted and folded in the hanging wall of the blind thrust system beginning in latest Cretaceous–early Tertiary. The blind thrust system probably rooted in, and was antithetic to, the east-dipping subduction zone beneath the forearc region. Active transpressional plate motion in western California is locally accommodated, in part, by reactivation of blind thrust faults that originally developed during the convergent regime.     

淮北煤田构造特征和形成机制

淮北煤田位于徐宿弧形推覆构造带前缘和外缘带。通过分析区域地质资料,并结合野外地质调查,探讨了淮北煤田的构造、演化特征及其形成机制。结果表明:①以宿北断裂为界将淮北煤田划分为南、北2个构造分区,北区构造线总体走向近SN-NNE,呈向西凸出的弧形展布,以逆冲断层为主,发育侏罗山式长轴褶皱;南区构造线走向NNW和NNE,以正断层和开阔短轴褶皱为主。②北区处于徐宿推覆构造主体部位,萧县背斜及其以东地区为上盘推覆体,萧县背斜以西地区属上盘推覆体;南区以西寺坡断层为界,该断层以东地带位于徐宿弧形构造带东南末端,属推覆构造上覆系统,西寺坡断层以西地区为推覆体下伏系统。③自石炭-二叠纪含煤地层沉积后,淮北煤田至少经历了3期较大的构造事件,即印支期近SN方向的挤压,形成近EW向断裂构造为主;燕山早期NWW-SEE方向的强烈挤压作用,形成徐宿弧形构造;燕山晚期NNE-SSW方向挤压,在煤田内形成大量NNE-SSW方向正断层。      

Growth trishear model and its application to the Gilbertown graben system, southwest Alabama

Fault-propagation folding associated with an upward propagating fault in the Gilbertown graben system is revealed by well-based 3-D subsurface mapping and dipmeter analysis. The fold is developed in the Selma chalk, which is an oil reservoir along the southern margin of the graben. Area-depth-strain analysis suggests that the Cretaceous strata were growth units, the Jurassic strata were pregrowth units, and the graben system is detached in the Louann Salt.The growth trishear model has been applied in this paper to study the evolution and kinematics of extensional fault-propagation folding. Models indicate that the propagation to slip (p/s) ratio of the underlying fault plays an important role in governing the geometry of the resulting extensional fault-propagation fold. With a greater p/s ratio, the fold is more localized in the vicinity of the propagating fault. The extensional fault-propagation fold in the Gilbertown graben is modeled by both a compactional and a non-compactional growth trishear model. Both models predict a similar geometry of the extensional fault-propagation fold. The trishear model with compaction best predicts the fold geometry.     

The glaciotectonic deformation of Quaternary sediments by fault-propagation folding

Fault-propagation folding is an important yet seldom recognised structural style within sediments affected by glacier-induced deformation. Fault-propagation folds develop in the hanging wall of low angle thrust faults and compensate part of the slip along the fault. Field examples are recognised across northern Europe, in glaciotectonic complexes of north Germany, Wales and the Isle of Man. The recognition of the fault-propagation fold mechanism in glaciotectonic deformation is important because resultant structures are related to exactly the same phase of deformation (i.e. the same phase of ice advance), and thus play a critical role in analyses of the temporal and spatial evolution of glacier-induced deformation. Some field examples show monoclinal geometries that are in good agreement with predictions of trishear kinematic theory. The trishear approach is appropriate to model these structures because the structures analysed in the field and simulated below show characteristics that are compatible with fault-propagation folds that were produced by trishear kinematics. The curved forelimb and the monocline geometry of the fault-propagation folds fit to the trishear model. The occurrence of footwall synclines is also in good agreement with trishear kinematics. These synclines show the typical thickening of the strata in the hinge. With respect to the modelling output, most important factors for the structural evolution of the fault-propagation folds is the ramp angle of the thrust, the position of the tip line and the propagation-to-slip ratio along the fault. This fits to observations made by previous studies at large scale fault-propagation folds in fold-and-thrust belts.     

安徽巢湖煤田控矿构造雏论

采用现代构造几何分析方法,研究了巢湖煤田的控煤构造,发现巢湖煤田主要受大型平卧式褶皱逆冲推覆构造控制。按构造变形特点从南到北可以划分为和县-含山平卧式褶皱推覆构造、巢湖银屏山平卧式褶皱推覆构造和无为平卧式褶皱推覆构造 3个构造带,卷入了震旦系灯影组-三叠系的整个扬子海相沉积盖层。这种大规模的褶皱逆冲推覆是扬子板块沿着郯庐断裂向华北板块A型俯冲的产物。      

龙门山南段大邑地区断裂带活动多期性研究

四川省大邑地区地处龙门山南段,是有名的地震多发地区。文章基于现代构造地质学理论,通过地震解释及构造几何分析、断层相关褶皱原理与几何分析方法、运动学正演模拟方法,开展了对大邑地区断裂带活动多期性研究,结果表明大邑地区断裂带活动具有多期性的特点。自印支期以来主要经历了两期三次构造活动:印支晚期的低角度逆冲推覆过程,须家河组四段(T3x4)中上部形成生长地层;喜马拉雅期Ⅰ幕,隐伏断层再次活动,造成侏罗系与下伏三叠系的变形差异;喜马拉雅期Ⅱ幕,龙门山构造带区域应力场向前传递,大邑地区形成高角度逆冲断层,断层沿深部滑脱层在大邑地区向上逆冲直至地表,早期隐伏断层被错断,伴随次级断层、反冲断层产生。     

Experimental (clay) models of inversion structures

Experimental modeling is used to study the geometry and evolution of inversion structures. Two main types of inversion structures are analyzed:

1. (1) structures formed by fault-propagation folding; and

2. (2) structures formed by fault-bend folding on listric faults.

Fault-propagation inversion structures initially develop as broad drape folds with possible fault breakthrough during an early extensional phase. Syn-extensional strata deposited in the hanging wall typically thicken away from the fault. Compressional reactivation results in reversal of slip on the master and secondary faults, their rotation to shallower dips, and the development of a compressional fault-propagation fold. Key features of the fault-propagation fold are basinward thickening of syn-extensional units and resulting steep dips of the front limb of the structure. Fault-bend inversion structures initiate as rollover folds within extensional half-graben. Deformation is primarily localized along a system of antithetic faults. Syn-extensional strata typically thicken across the fault but also thin basinward away from the fault. During compression, the extensional rollover folds are folded into compressional fault-bend folds. Key features of this structure are thinning of syn-extensional units into the basin. Inversion of more symmetric graben results in a doubly-convex geometry of syn-extensional units. These observations of bed geometry and thickness provide predictive models for interpreting the geometries of inversion structures in areas of poor data quality.     

西藏中部念青唐古拉山链中生代以来构造演化

根据对西藏念青唐古拉构造变形分析及地质年代测定资料，将该区构造变形划分为晚侏罗世到早白垩世的伸展拆离，形成区域性面理构造；晚白垩世到渐新世聚敛作用，形成斜向逆冲构造及雁列式褶皱；中新世以来的伸展、隆升，形成念青唐古拉剥离断层及羊八井地堑。     

河南金龙井田控煤构造分析

金龙井田位于荥巩煤田西部,属华北聚煤盆地南缘的嵩箕构造区,构造演化阶段清晰,形式多样。区内总体构造形态为单斜构造,地层走向NWW-近EW、倾向NNW-近N、浅部地层倾角因受滑动构造（HF1）的影响,变化较大7°-25°;深部（滑动构造以下）倾角平缓4°～12°。控煤构造主要由印支期东西向断裂（F9、F10）、燕山期北东向裂陷断裂（R）、逆掩断裂组及喜山期地层重力滑动构造等多期变形叠加而成。综合评价区内构造复杂程度属中等构造。