江苏六合方山幔源包体橄榄石的位错构造研究

本研究采用光学显微镜(氧化缀饰)法和透射电子显微镜法,首次查明江苏六合方山玄武岩的包体橄榄石中存在自由位错、位错壁、位错弓弯、位错环、亚晶粒和位错扭折条带等显微、超显微构造,它们是包体橄榄石在上地幔高温、高压条件下发生塑性蠕变的产物,不同位错形态反映主矿物塑性变形的不同状态。根据橄榄石中自由位错密度和包体中辉石的化学成分,估算江苏六合方山地区上地幔某些流变学参数为:温度(t)为1052℃,压力(P)为2060MPa;深度(Z)为66.6km;流动应力(σ_1—σ_3)为51.3MPa;流动速率(ε)为3.6×10~(-14)/s;粘稠应(η)为5.7×10~(21),这些参数值与中国东部其它地区上地幔的同类参数值相接近。     

平南幔源包体中橄榄石的显微构造研究及其意义

平南玄武岩中的尖晶石二辉橄榄岩包体的平衡温度为930~980℃, 平衡深度为59~74km, 包体中橄榄石的扭折带滑移系多为(010) [100], 但也有(001) [100]的滑移系类型; 斜方辉石的滑移系为(100) [001], 它们均为高温低应变速率下的滑移系, 说明该区的上地幔主要是在高温低应变速率条件下经历了塑性变形作用.橄榄石位错组态多样, 有自由位错、位错壁、位错弓弯、缠结、{110}滑移带, 反映了上地幔的塑性变形特征.根据位错壁的大小估算, 上地幔差异流动应力为24.5~42.1MPa, 流动速率为2.93×10-17~8.36×10-16s-1, 有效粘度为1.72×1023~2.80×1024 Pa·s, 特征与中国东部新生代上地幔较为一致, 反映同处于拉张环境.      

橄榄石位错构造及其上地幔流变学意义——以河北省大麻坪二辉橄榄岩为例

本文运用氧化缀饰法对大麻坪幔源包体的橄榄石位错进行了研究,其主要位错类型包括:[100]、[001]位错壁、亚颗粒构造、(010)位错滑动环、位错网、交叉滑移位错、{110}滑动条带构造。根据稳定态亚颗粒统计,其数值为15.53—25.72μm,平均为20.65μm,位错密度为20×10~6—90×10~6cm~(-2),相应的差异应力分别为48.4—70.8MPa和44—92MPa。     

西藏东巧方辉橄榄岩的显微构造特征及其流变学意义

西藏东巧地区蛇绿岩套中橄榄岩是青藏高原出露的为数不多的地幔岩体之一, 对于揭示该地区的上地幔流变学特征具有重要意义.报道了该地区方辉橄榄岩中橄榄石的位错显微构造特征, 估算了上地幔流变学参数.显微构造研究表明, 东巧方辉橄榄岩发育残斑结构, 橄榄石中位错组态类型比较丰富, 包括自由位错、位错壁(包括宽阔型和紧密型)、位错弓弯和位错网, 表明橄榄石的主导变形机制可能为位错蠕变.该区地幔岩变形大致分为2个阶段: (1) 地幔缓慢塑性流动变形, 形成宽阔型位错壁; (2) 蛇绿岩侵位过程中的变形, 产生紧密型位错壁.根据2种位错壁估算的流动应力平均值分别为3 9.3MPa (宽阔型)和113.9MPa (紧密型), 计算结果获得东巧地区上地幔流动速率为1.13× 10-12 ~ 2.95× 10-11s-1, 有效粘度为4.44×1017~ 1.16×1019Pa°s, 这些参数为东巧地区上地幔物理特征提供了流变学的约束条件      

塔里木盆地北缘幔源岩石包体特征及岩石圈上地幔流变规律

岩石圈上地幔岩石包体保存着上地幔物质组成和岩石学的特征以及岩石圈上地幔构造变形特性、岩石变形机制和流变性质的丰富信息。塔里木盆地西北缘的巴楚地区的幔源包体主要由橄榄岩组成,次为单辉橄榄岩,与中国东部以及西部其他地区发育的尖晶石、石榴石二辉橄榄岩幔源包体有所区别。从莫霍面至岩石圈上地幔下部,随着深度、温度和压力的增高,幔源包体橄榄石中出现直线状位错、位错缠结、网络—曲线状、环状位错—直线状位错、位错缠结、网络—曲线状位错,环状位错的变化规律;其微观变形机制有从碎裂—位错滑移—位错蠕变—扩散蠕变的变化规律;差异应力值有从低—高—低—高的正弦波状变化趋势,在莫霍面附近以及上地幔韧性软层与脆性层附近差异应力值一般较高;应变速率值则是逐渐减慢的总体变化趋势,整体反映出岩石和矿物从脆—韧性的流变性质。     

河北汉诺坝玄武岩中幔源捕虏体中的水

本文对河北汉诺坝玄武岩内的幔源捕虏体矿物进行了系统地红外光谱学研究。结果表明,来自该地区约75km以上的地幔捕虏体普遍含有微量水(0.45×10~(-2)％～11.6×10~(-2)％,以H_2O计算,下同),以OH~-形式主要赋存在辉石(及橄榄石?)中,而不是在角闪石或金云母中。捕虏体中的水可能首先进入橄榄石、石榴石及辉石晶格,角闪石或金云母晶出在后。虽然角闪石及金云母晶格中含有比辉石高百倍的水,但它们所含的水可能是局部水的富集,与相对规模较小的岩浆事件或交代作用有关。早期研究估计的75km以上原始地幔岩中含0.1％水的数据可能偏高。汉诺坝玄武岩捕虏体含水量(多数1.11×10~(-2)％～3.01×10~(-2)％)比大洋中脊玄武岩和南非金伯利岩中捕虏体含水量(多数低于1.00×10~(-2)％)略高。反映了水在上地幔中时间、空间分布的不均匀性。幔源无水硅酸盐矿物中含有微量水这一事实,为了解上地幔中水的分布,水在地幔中的动力学、地球化学过程所起的作用提供了重要基础数据。     

含水对富铁橄榄石流变性的影响

橄榄石是下地壳上地幔最丰富的造岩矿物,橄榄石集合体的高温高压流变性对地幔动力学过程有着很大的影响。以往对橄榄石单晶和集合体进行过的流变性实验研究,涉及了温度、压力、氧逸度、含铁量以及含水等因素的影响,本文研究了含水对富铁橄榄石集合体流变性能的影响,首先,利用高精度 Paterson 气体介质变形装置对含水富铁橄榄石集合体(Mg_(0.9),Fe_(0.1))_2SiO_4、(Mg_(0.7),Fe_(0.3))_2SiO_4和(Mg_(0.5),Fe_(0.5))_2SiO_4进行了高温三轴压缩蠕变试验,变形试验条件为:温度1323～1473K,围压300MPa,差应力10～300MPa,应变率10~(-7)～10~(-4)s~(-1),每个试件的最大变形量为20%。利用三维非线性拟合方法对蠕变试验数据进行分析,结果表明,含水富铁橄榄石集合体的微观变形机制为扩散域和位错域,对三种铁含量,扩散域的应力指数为1。位错蠕变域中,Fo_(50)应力指教为3.8,活化能为444kJ/mol;Fo_(70)应力指数为3.7,活化能为479kJ/mol,Fo_(90)应力指数为3.6,活化能为514kJ/mol。将实验结果与不含水富铁橄榄石集合体的强度进行对比,发现含水使富铁橄榄石的强度明显下降,舍铁量相同时,含水橄榄石集合体的流变强度比干燥时小至少一个数量级。从而得到了含水对含铁量不同的橄榄石集合体粘性(强度)影响的初步试验结果。     

河北汉诺坝新生代玄武岩中幔源包体和高压巨晶的氦同位素地球化学研究

对该地区新生代玄武岩中幔源包体和高压巨晶的氦同位素进行了初步研究。幔源包体中橄榄石的3 He 4 He值为 (0 .15～ 7.4)× 10 - 6,较MORB值明显偏低 ,甚至低于大气的值 ,说明该地区曾发生过强烈的地幔交代作用。高压巨晶辉石和石榴子石的氦同位素组成与此明显不同 ,其3 He 4 He值为 (5 .7～ 2 4.3)× 10 - 6。提出幔源包体和高压巨晶不是同源的 ,二者可能与寄主玄武岩均无必然成因联系。在汉诺坝地区一件石榴子石巨晶中还发现了异常高的3 He 4 He值。     

中国东部地幔岩中的金含量及其意义

本文分析了中国东部65件地幔岩包体及其寄主岩石中的金含量,并有重要发现。除金含量异常的样品外,玄武岩及其中地幔岩包体的金含量分别在0.2×10~(-6)～5.3×10~(-9)和1.0×10~(-9)～8.2×10~(-9)之间,其中包体平均含金3.8×10~(-9),玄武岩平均含金2.7×10~(-9)。金伯利岩及其中地幔岩包体的     

吉林辉南幔源橄榄岩流变学与组构特征及其动力学启示

吉林辉南位于华北克拉通(NCC)东北部边缘,新生代玄武岩中含有大量的新鲜幔源包体.包体类型主要为尖晶石二辉橄榄岩.由包体矿物化学成分计算的平衡温度为:982～1085℃.氧化缀饰方法揭示了样品中橄榄石的显微特征,表明包体存在形态各异的位错样式:位错壁、亚颗粒、位错环、位错网等,指示样品可能经历了以位错蠕变为主的塑性变形...     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。