Variation of cavity gas pressure in slopes with weak intercalation under seismic load

This study discussed how cavity gas pressure affects the stability of rock mass with fractures under well controlled laboratory experiments. Suddenly-created void space created and the induced gas pressures have been the focus of active researches because they are associated with fast movement of large-scale landslides. A shaking table experiment was set up to mimic weak-intercalated rock slope under seismic loads. Excessive cavity gas pressure would be produced in weak spots upon a sudden vibration load. The drastically elevated gas pressure is believed to be responsible for the creation of cavities surrounding the tension fracture. With dissipation of the excessive cavity gas pressure, the fractures are in unbounded closed-state. This observation explains that the slope body would be split and loosened under several aftershocks, and with the expanding of the cracks, the slope failure eventually occurred. The research of the mechanism of cavity gas pressure could provide a novel insight into the formation mechanism of landslides under seismic load and has implications for the disaster prevention and control theory for the slope stability evaluation.     

Relation of submarine landslide to hydrate occurrences in Baiyun Depression,South China Sea

Submarine landslides have been observed in the Baiyun Depression of the South China Sea. The occurrence of hydrates below these landslides indicates that these slope instabilities may be closely related to the massive release of methane. In this study, we used a simple Monte-Carlo model to determine the first-order deformation pattern of a gravitationally destabilizing slope. The results show that a stress concentration occurs due to hydrate dissociation on the nearby glide surface and on top of a gas chimney structure. Upon the dissolution of the gas hydrate, slope failure occurs due to the excess pore pressure generated by the dissociation of the gas hydrates. When gas hydrates dissociate at shallow depths, the excess pore pressure generated can be greater than the total stress acting at those points, along with the forces that resist sliding. Initially, the failure occurs at the toe of the slope, then extends to the interior. Although our investigation focused only on the contribution of hydrate decomposition to submarine landslide, this process is also affected by both the slope material properties and topography.     

The starting mechanism and movement process of the coseismic rockslide: A case study of the Laoyingyan rockslide induced by the “5.12” Wenchuan earthquake

The"5.12"Wenchuan earthquake in 2008 triggered a large number of co-seismic landslides.The rear boundary or cracks of co-seismic landslide are generally located at the steep free surface of thin or thick mountains.Dynamic process of this kind of landslides could be divided into two parts:the seismic dynamic response of the slope and the movement process of rock mass.Taking the Laoyingyan rockslide as an example,the amplification effect was studied by single-degree-of-freedom system analysis method.Besides,the dynamic process of landslide under seismic loading was simulated by the finite difference method(FDM)and discrete element method(DEM).The amplification coefficient of the rockslide to seismic wave is 1.25.The results show that the critical sliding surface of the Laoyingyan rockslide was formed at the 23 th seconds under the action of seismic wave.At the same time,tension failure occurred at the rear edge of the sliding mass and shear failure occurred at the front edge.The maximum displacement was 0.81 m and the initial velocity was 2.78 m/s.During the initiation process of the rockslide,the rock mass firstly broke down along the joints which are along the dip of the rock stratum,and then collapsed bodily along the secondary structural planes.In the process of movement,the maximum velocity of rock mass was 38.24 m/s.After that,the rock mass underwent multiple collisions,including contact,deceleration to 0 and speed recovery after rebound.Finally,due to the constant loss of energy,the rocks stopped and accumulated loosely at the foot of the slope.The longest distance of movement was about 494 m.Besides,the smaller the damping ratio,the farther the rock mass moved.Compared with the results without considering the amplification factor,the movement distance of landslide by considering the amplification factor was more accurate.The study of the Laoyingyan rockslide is helpful to strengthen our field identification of potential co-seismic rockslides.At the same time,understanding its movement and accumulation process can help us better predict the hazard scope of the co-seismic rockslides,and provide a reference for the design of treatment projects.     

On the initiation,movement and deposition of a large landslide in Maoxian County,China

At 5 am 24 th June 2017, a catastrophic landslide hit Xinmo Village, Maoxian County, Sichuan Province, China. The slide mass rushed down from an altitude of 3400 m and traveled 2700 m in a high velocity. The 13 million m~3 deposition buried the whole village and caused about 100 deaths. The source area of the landslide is located in a high steep slope, average slope angle is 40o and maximal angle is 65o. The strata are interbedded Triassic Zagunao Formation metamorphic sandstone and slate with the dip slope angle of 45°. Based on high-resolution satellite remote sensing image, UAV image, DEM data, and field investigation, failure mechanism, travel features, and deposit characteristics were analyzed. The results showed that this landslide was influenced by Songpinggou Fault zone. According to the topography before the failure, the landslide is located in the back scarp of an antecedent landslide induced by Diexi Earthquake in 1933. The bedding slope provided potential rupture surface. Historical seismic activities and long-term gravitational deformation caused rock mass accumulated damages. Weathering and precipitation weakened the rock mass and finally induced shearing and tension failure. A huge block detached from the top rock slope, pushed the past landslide deposits in the middle part, rushed out of the slope bottom in a high velocity and buried the Xinmo Village. The rapid movement entrained and brought the soil into the Songping Gully which recoiled with and bounced back from the opposite mountain.     

基于射线理论的垂直P波入射过程滑坡滑带应力放大特征及成因分析

汶川地震触发的最大滑坡——大光包滑坡是受控于斜坡先期层间构造错动带(软弱层)的大型地震滑坡, 该软弱层不但遭受了强烈的历史构造碎裂, 还在地震中产生了大面积新生震裂, 其成因及对大光包滑坡启动的贡献一直是国内外研究焦点。以大光包滑坡为地质原型, 将层间构造错动带概化为含软弱层单元地质体模型, 基于地震波射线理论, 建立了垂直P波入射过程考虑软弱层顶底界面波场转换和时间延迟的动力响应理论模型, 开展了垂直振动作用下含软弱层单元地质体振动台模型试验, 获得了软弱层应力放大特征及受地震强度和频率的影响规律, 揭示振动波在软弱层顶底界面的波场转换和能量分配产生了振幅衰减, 以及因软弱层与上下硬层介质属性差异造成的时间延迟, 共同导致应力分异和叠加, 促使软弱层应力放大; 从而认为, 强震过程中大光包滑坡先期层间构造错动带应力放大导致了带内岩体碎裂, 降低了滑带岩体抗剪强度, 从而促使强震过程中滑坡快速启动。      

Landslide distribution and sliding mode control along the Anninghe fault zone at the eastern edge of the Tibetan Plateau

Tibetan Plateau is known as the roof of the world. Due to the continuous uplift of the Tibetan Plateau, many active fault zones are present. These active fault zones such as the Anninghe fault zone have a significant influence on the formation of special geomorphology and the distribution of geological hazards at the eastern edge of the Tibetan Plateau. The Anninghe fault zone is a key part of the Y-shaped fault pattern in the Sichuan-Yunnan block of China. In this paper, high-resolution topographic data, multitemporal remote sensing images, numerical calculations, seismic records, and comprehensive field investigations were employed to study the landslide distribution along the active part of the Anninghe. The influence of active faults on the lithology, rock mass structures and slope stress fields were also studied. The results show that the faults within the Anninghe fault zone have damaged the structure and integrity of the slope rock mass, reduced the mechanical strength of the rock mass and controlled the slope failure modes. The faults have also controlled the stress field, the distribution of the plastic strain zone and the maximum shear strain zone of the slope, thus have promoted the formation and evolution of landslides. We find that the studied landslides are linearly distributed along the Anninghe fault zone, and more than 80% of these landslides are within 2-3 km of the fault rupture zone. Moreover, the Anninghe fault zone provides abundant substance for landslides or debris flows. This paper presents four types of sliding mode control of the Anninghe fault zone, e.g., constituting the whole landslide body, controlling the lateral boundary of the landslide, controlling the crown of the landslide, and constituting the toe of the landslide. The results presented merit close attention as a valuable reference source for local infrastructure planning and engineering projects.     

呷爬滑坡滑带土蠕变特性及其稳定性

水库滑坡变形破坏受其岩土体蠕变特性及环境因素的影响。当滑坡进入加速变形阶段后,变形骤然增大,失稳概率增加。为了研究滑坡岩土体蠕变特性及其稳定性,选取锦屏一级水电站呷爬滑坡为研究对象,采用坡表位移监测曲线分析与室内三轴蠕变试验相结合的方法,建立了Burgers蠕变模型结合FLAC3D软件进行了滑坡稳定性研究。分析坡表位移-时间曲线发现,坡体变形特征与一般滑坡土体的蠕变特征具有相似性,滑带土室内三轴蠕变试验结果表明,滑带土变形可划分为瞬时蠕变、减速蠕变与稳定蠕变3个阶段,同时其瞬时变形量、稳定蠕变速率均随围压以及应力水平的增大而增大。基于滑带土蠕变特性的Burgers蠕变模型的计算结果,对比了常规强度折减法与考虑蠕变的强度折减法的滑坡稳定性系数,计算结果表明呷爬滑坡目前处于稳定状态,在一个计算周期内考虑蠕变的强度折减法较常规强度折减法的稳定性系数下降了0.04,因此,揭示滑坡土体蠕变特性并在此基础上研究其稳定性具有实际意义。      

三峡库区大型-特大型层状岩质滑坡成因模式及地质特征分析

三峡库区大型-特大型滑坡发育，尤以层状岩质滑坡的危害性大。因库区各段地质条件差异使得滑坡成因模式各不相同，这影响了滑坡的运动形式和岩土体解体程度。在收集三峡库区51处典型的大型-特大型层状岩质滑坡调查资料基础上，根据堆积岩体结构和区段地质条件反推该段滑坡破坏成因模式，而不同成因模式下的滑坡坡体渗透性不同，分析已有滑坡对库水位变动存在的复活响应差异，据此得出以下结论:①在成因模式上，除顺层滑移型滑坡在库区中均有分布外，从库首至库尾随着岩层倾角的逐渐减缓，滑坡成因模式从崩塌型、反倾弯曲型逐渐过渡到平推式；②在坡体渗透性上，成因模式造成的岩体结构变化与坡体中的泥质含量共同作用，导致顺层滑移型滑坡前后缘渗透性存在较大差异；反倾型滑坡渗透性则整体变化较小；③在库水位变动影响下，不同坡体渗透性与滑面形态共同决定了滑坡的复活变形差异。      

基于模型试验的动水驱动型顺层岩质滑坡启滑机制初探

动水驱动型顺层岩质滑坡数量多、灾害频发、危害大, 是滑坡地质灾害领域的研究重点, 但目前对于滑坡启滑机制的认识仍不充分, 滑坡的准确预报还面临巨大挑战。鉴于此, 以含软弱夹层的中倾角顺层岩质滑坡为研究对象, 通过构建理想的单层滑带滑坡物理模型, 开展了一系列动水作用下的滑坡模型试验研究。结果表明, 动水作用下顺层岩质滑坡从开始变形至失稳滑动需经历初始变形、缓慢变形、加速变形和失稳破坏4个阶段, 而各个阶段的演化特征与滑面粗糙度和倾角密切相关。滑面倾角越大或粗糙度越小, 滑坡体从开始变形至失稳滑动所需的时间则越短; 相应地, 坡体加速变形阶段越不明显, 滑坡破坏的突发性越强。滑带内的渗流冲蚀作用会使滑带土中的骨料流失, 导致其抗剪强度降低, 进而引发坡体滑动。与此同时, 上覆坡体的压剪作用以及变形演化过程亦将反过来影响冲蚀强度。基于滑带土黏聚力随水力梯度和冲蚀时间的变化关系, 提出了渗流驱动下滑带土黏聚力演化模型, 可较好地描述滑带土黏聚力的退化过程。滑面粗糙度的存在不仅显著影响了滑带的冲蚀劣化规律, 还改变了滑带不同区域的破坏模式。此外, 通过考虑滑面粗糙度对滑带不同区域破坏模式的影响, 开展了动水多效应关联分析, 建立了滑坡地质体力学分析模型, 实现了动水作用下顺层岩质滑坡动态稳定性的有效评估。本研究成果可为实际动水驱动型顺层岩质滑坡的预测和防治提供理论参考。      

Regional scale rainfall- and earthquake-triggered landslide susceptibility assessment in Wudu County, China

Wudu County in northwestern China frequently experiences large-scale landslide events.High-magnitude earthquakes and heavy rainfall events are the major triggering factors in the region.The aim of this research is to compare and combine landslide susceptibility assessments of rainfalltriggered and earthquake-triggered landslide events in the study area using Geographical Information System(GIS) and a logistic regression model.Two separate susceptibility maps were produced using inventories reflecting single landslide-triggering events,i.e.,earthquakes and heavy rain storms.Two groups of landslides were utilized: one group containing all landslides triggered by extreme rainfall events between 1995 and 2003 and the other group containing slope failures caused by the 2008 Wenchuan earthquake.Subsequently,the individual maps were combined to illustrate the locations of maximum landslide probability.The use of the resulting three landslide susceptibility maps for landslide forecasting,spatial planning and for developing emergency response actions are discussed.The combined susceptibility map illustrates the total landslide susceptibility in the study area.     

基于多源数据的谭家湾滑坡变形机制及稳定性评价

针对2016年5月发生于秭归县西北部的谭家湾滑坡,结合卫星遥感影像、现场勘查资料以及历史资料等多源数据,初步明确了滑坡的影响区域、特征及发生时序;综合采用钻探、槽探、物探等手段,开展室内外相关实验,明确了滑坡区的地层特性以及岩土体物理力学性质指标,通过分析该区裂缝位移及GPS数据,对该边坡的变形机制进行了探讨,并对该区稳定性进行了评价。结果表明:①谭家湾滑坡属于不规则"圈椅形"中型松散层的水库下降型滑坡,滑坡区的地表形态、地质构造及岩性等因素决定了滑坡的形成和发育,库水位和降雨的共同作用激励了滑坡的变形;②滑坡根据时序共分为3级滑体,总体呈现多次、多层、相互影响的演化特点,第三级滑体具有牵引式特征;③滑坡体内地下水位随库水位下降而下降,但下降速率缓于库水位,随之坡体内水力梯度和渗透力显著变大,此时碰到强降雨,将会导致坡体地下水赋存,岩土体软化,加剧滑坡变形,须施加必要的防护措施。④稳定性分析表明,该滑坡现处于临界稳定状态,一旦发生降雨和库水位变化,局部段可能发生失稳滑动。      

兴仁“6·10”彭家洞高速滑坡运动特征与形成机理

2021年6月10日20时30分左右, 贵州省兴仁彭家洞发生高速滑坡, 滑坡体高速运动沿途铲刮坡面崩塌堆积体, 造成3人遇难, 18栋房屋损毁。通过对滑坡发生前后影像资料遥感解译、灾害发生现场详细的地质调查及室内综合分析等技术手段, 对彭家洞滑坡的特征进行了详细描述, 阐明了滑坡发生的运动特征与形成机理。研究表明: 斜坡地形"上陡-中缓-下陡"与岩土结构"上硬下软"是滑坡形成的内在因素, 人类工程活动、强降雨的饱水加载和下渗软化作用是滑坡形成的外在因素; 滑坡平面形态呈折线形, 根据运动特征和堆积结构将滑坡分为滑源区(Ⅰ)、铲刮-流通区(Ⅱ)、铲刮堆积区(Ⅲ)3个区; 滑坡是由危岩带形成、滑坡孕育及斜坡失稳3个阶段孕育形成的挤压-推移式高速滑坡。研究结果对贵州类似的斜坡地带及岩土结构区域开展防灾减灾工作具有较强的指导作用。      

基于物理模型试验的多层滑带滑坡变形演化特征

滑坡变形演化特征一直是滑坡灾害预测与防治领域急需解决的关键问题, 但对于多层滑带滑坡的变形演化特征却少有研究。以物理模型试验为手段建立了三层滑带滑坡物理试验模型, 完成了多层滑带滑坡变形演化全过程的模拟。基于PIV技术获取坡表位移数据, 通过柔性测斜仪监测滑坡深部位移, 同时布设土压力盒获取滑坡内部土压力的变化情况, 实现了多层滑带滑坡演化过程多参量数据分析。试验结果表明, 多层滑带滑坡破坏过程可分为初始、等速、加速和破坏4个阶段。不同破坏阶段滑坡的主要变形区域不同, 下层滑体受到上层滑体牵引作用, 在重力和推力作用下滑坡变形逐渐向浅层发展。变形过程中滑坡应力逐渐向滑带集中, 滑坡推力沿埋深方向呈多级梯形分布。加速变形阶段滑带处应力迅速增大, 滑坡体内产生多层应力集中带, 滑带位置推力变化与滑坡位移显著相关。      

基于有效降雨阈值的澧源镇滑坡灾害危险性分析

以湖南省澧源镇为例,利用证据权模型和灰色关联度模型分别计算了坡度、地层岩性、斜坡形态、土地利用类型、人类工程活动5个因子二级状态证据权值和一级因子权重;综合2种模型确定全区滑坡易发性指数后,完成基于斜坡单元的全区滑坡易发性区划;根据研究区岩土体类型（碎屑岩类、碳酸盐岩夹碎屑岩类、碳酸盐岩类和松散岩土体类）分组研究不同滑坡发生概率下的有效降雨阈值曲线（I-D曲线）。研究降雨时间为3日、有效强度为22.4 mm/d的降雨工况下各岩土体类型滑坡发生的时间概率。综合时间概率和易发性结果得到澧源镇基于有效降雨阈值的滑坡灾害危险性区划图。研究结果表明:澧源镇滑坡灾害高和极高易发区占研究区总面积的25%,主要沿澧河分布;极高危险区和高危险区占研究区总面积的14%,主要分布在澧河北侧。      

强震作用下斜坡表面放大效应的三维离散元模拟

为研究强震作用下斜坡表面的动力放大效应, 以陕西勉县某岩质斜坡为例, 建立了三维模型。运用离散元软件3DEC, 模拟了动力条件下斜坡的变形失稳过程, 分析了斜坡表面的动力响应特征, 研究了不同地震波输入工况条件下坡体表面动力响应差异。研究结果表明: 考虑地震纵波的影响时, 竖向加速度得到显著增强, 坡面的PGA放大系数增强了约1.62倍; 坡面形态强烈影响着斜坡表面的动力响应特征, 强震作用下, 斜坡坡肩及坡形转折处的放大效应均十分强烈, 凸出部位次之, 坡表两侧的放大效应最弱; 不同输入工况下, 斜坡坡形转折处的水平向PGA放大系数均维持较高值, 特别是在仅输入水平向加速度的条件下, 该部位在地震滑坡灾害预防中应特别注意; 强震作用下滑坡的运动过程可概括为滑坡孕育启动阶段—挤压碰撞高速运动阶段—堆积阶段。研究成果可为该地区防灾减灾工作提供一定理论支持。      

GIS-based earthquake-triggered landslide hazard zoning using contributing weight model

Earthquake-triggered landslides have aroused widespread attention because of their tremendous ability to harm people's lives and properties.The best way to avoid and mitigate their damage is to develop landslide hazard maps and make them available to the public in advance of an earthquake.Future construction can then be built according to the level of hazard and existing structures can be retrofit as necessary.During recent years various approaches have been made to develop landslide hazard maps using statistical analysis or physical models.However,these methods have limitations.This study introduces a new GIS-based approach,using the contributing weight model,to evaluate the hazard of seismically-induced landslides.In this study,the city and surrounding area of Dujiangyan was selected as the research area because of its moderate-high seismic activity.The parameters incorporated into the model that related to the probability of landslide occurrence were:slope gradient,slope aspect,geomorphology,lithology,base level,surface roughness,earthquake intensity,fault proximity,drainage proximity,and road proximity.The parameters were converted into raster data format with a resolution of 25×25m2 pixels.Analysis of the GIS correlations shows that the highest earthquake-induced landslide hazard areas are mainly in the hills and in some of the moderately steep mountainous areas of central Dujiangyan.The highest hazard zone covers an area of 11.1% of the study area,and the density distribution of seismically-induced landslides was 3.025/km2 from the 2008 Wenchuan earthquake.The moderately hazardous areas are mainly distributed within the moderately steep mountainous regions of the northern and southeastern parts of the study area and the hills of the northeastern part;covering 32.0% of the study area and with a density distribution of 2.123/km2 resulting from the Wenchuan earthquake.The lowest hazard areas are mainly distributed in the topographically flat plain in the northeastern part and some of the relatively gently slopes in the moderately steep mountainous areas of the northern part of Dujiangyan and the surrounding area.The lowest hazard areas cover 56.9% of the study area and exhibited landslide densities of 0.941/km2 and less from the Wenchuan earthquake.The quality of the hazard map was validated using a comparison with the distribution of landslides that were cataloged as occurring from the Wenchuan earthquake.43.1% of the study area consists of high and moderate hazardous zones,and these regions include 83.5% of landslides caused by the Wenchuan earthquake.The successful analysis shows that the contributing weight model can be effective for earthquake-triggered landslide hazard appraisal.The model's results can provide the basis for risk management and regional planning is.     

基于地震信号反演滑坡动力学机制

以2003年千将坪滑坡事件为例，基于地震信号分析大型高速滑坡启动之后的滑体运动特性。通过国家地震台网采集因滑坡激发产生的地震信号，反演得到滑坡区域的受力-时间函数，再经由时频分析划分滑坡期间的子事件，进而推导滑体的运动参数并还原滑坡过程。结果显示，由地震信号反演所求得的滑床坡度、滑坡方向以及滑体位移等数值与现场勘踏所得数据相符；同时，通过对滑坡子事件的分析，可分辨出因对岸河堤阻挡而产生的部分滑体反倾过程，从而还原较完整的滑坡过程。     

Cyclic load testing of pre-stressed rock anchors for slope stabilization

The objective of this research was to assess the characteristics of seismic induced damage and the deformation patterns of pre-stressed cement-grouted cables that are used for rock slope stabilization projects subjected to quasi-static cyclic loading. The experimental configuration includes the installation of 15 pre-stressed cables in a slope model made of concrete blocks (theoretically rigid rock mass) on top of a pre-existing sliding surface. The study showed that: (i) The pre-stressed cables exhibited great seismic performance. Rapid displacement of the model blocks was observed after the complete loss of the initial pre-stress load under continued applied cyclic loads and exceedance of the state of equilibrium, which implies the higher the initial pre-stress load, the better the seismic performance of the rock anchor; (ii) The failure of the pre-stressed cables was due to fracture at the connection of the tendons and cable heads under cyclic loading. The sequence of failure had a distinct pattern. Failure was first observed at the upper row of cables, which experienced the most severe damage, including the ejection of cable heads. No evidence of de-bonding was observed during the cyclic loading; (iii) The stress distribution of the bond length for pre-stressed cables was highly non-uniform. High stress concentrations were observed at both the fixed end and the free end of the bond length both before and immediately after the state of equilibrium is exceeded. The results obtained can be used to evaluate the overall performance of pre-stressed rock anchors subject to seismic loading and their potential as rockfall prevention and stabilization measures.     

降雨与开挖作用下黄土滑坡失稳过程分析: 以关中地区长武县杨厂村老庙滑坡为例

降雨入渗和人工开挖是诱发黄土滑坡的重要因素, 为了研究在这2种诱因作用下关中地区黄土滑坡失稳过程及其对稳定性的影响, 以陕西省长武县杨厂村老庙滑坡为研究对象, 通过现场调查、地质测绘和钻孔勘探, 查明了该滑坡变形特征, 定性分析了滑坡变形演变过程; 基于滑坡变形前15 d内日降雨量实测值, 采用有限元软件, 对坡脚开挖后连续降雨作用下滑坡形成过程进行了仿真模拟; 基于强度折减法对该滑坡稳定性变化规律进行了研究。结果表明: ①关中地区特殊的地层结构是滑坡变形的内因, 降雨是最主要的诱发因素; ②滑坡失稳演化过程表现为: 坡体处于蠕滑状态, 坡脚开挖后, 坡体前缘失稳, 牵引中后缘坡体向下错动而产生张拉裂缝, 在降雨作用下, 雨水沿裂缝渗入坡体深部, 滑坡中部岩土体浸水后抗剪强度降低, 从而导致黄土层与红黏土层接触面饱水形成贯通滑带, 诱发深层滑坡; ③滑坡开挖后较初始状态, 稳定性系数降幅为0.102, 此后受连续降雨影响, 稳定性系数在前10 d以平均0.010/d的速率缓慢下降, 第10~13 d以0.034/d的速率快速下降至最低, 第13 d以后开始回升。研究结果可以为该类滑坡防治提供有效依据。      

西湖凹陷天台斜坡带火山机构三维雕刻及成因机制解析

西湖凹陷天台斜坡区火成岩发育尤为丰富,其发育与分布对盆内储层改造、构造演化都有着重要影响。依据区内地震特征和构造环境,划分出中心式、裂隙式2种喷发类型;采用振幅－方差体地震属性分级－拾取－融合技术,系统刻画区内火成岩的三维时空展布以及火山喷发时期,发现区内火成岩具有始新世至中新世多期间歇性发育特征,且火山机构富集于天台斜坡西南部;在区内建立了中心式和裂隙式2种喷发模式,认为这些模式的建立对于正确预测火成岩的分布具有重要意义;最后对火成岩的成因机制进行了解析与探讨,发现区内火山活动与板块构造运动相互影响、火山的时空展布与断裂也具有一定的配置关系,认为裂隙式喷发可能会形成优势的油气运移通道,中心式喷发则有利于形成良好的储集空间。基于此,我们将更容易找到区内有效的火成岩储层,对油气勘探具有重要的指示作用。