Metamorphism,graphite crystallinity,and sulfide anatexis of the Rampura–Agucha massive sulfide deposit,northwestern India

Located adjacent to the Banded Gneissic Complex, Rampura–Agucha is the only sulfide ore deposit discovered to date within the Precambrian basement gneisses of Rajasthan. The massive Zn–(Pb) sulfide orebody occurs within graphite–biotite–sillimanite schist along with garnet–biotite–sillimanite gneiss, calc–silicate gneisses, amphibolites, and garnet-bearing leucosomes. Plagioclase–hornblende thermometry in amphibolites yielded a peak metamorphic temperature of 720–780°C, whereas temperatures obtained from Fe–Mg exchange between garnet and biotite (580–610°C) in the pelites correspond to postpeak resetting. Thermodynamic considerations of pertinent silicate equilibria, coupled with sphalerite geobarometry, furnished part of a clockwise P–T–t path with peak P–T of ∼6.2 kbar and 780°C, attained during granulite grade metamorphism of the major Zn-rich stratiform sedimentary exhalative deposits orebody and its host rocks. Arsenopyrite composition in the metamorphosed ore yielded a temperature [and log f(S ₂)] range of 352°C (−8.2) to 490°C (−4.64), thus indicating its retrograde nature. Contrary to earlier research on the retrogressed nature of graphite, Raman spectroscopic studies on graphite in the metamorphosed ore reveal variable degree of preservation of prograde graphite crystals (490 ± 43°C with a maximum at 593°C). The main orebody is mineralogically simple (sphalerite, pyrite, pyrrhotite, arsenopyrite, galena), deformed and metamorphosed while the Pb–Ag-rich sulfosalt-bearing veins and pods that are irregularly distributed within the hanging wall calc–silicate gneisses show no evidence of deformation and metamorphism. The sulfosalt minerals identified include freibergite, boulangerite, pyrargyrite, stephanite, diaphorite, Mn–jamesonite, Cu-free meneghinite, and semseyite; the last three are reported from Agucha for the first time. Stability relations of Cu-free meneghinite and semseyite in the Pb–Ag-rich ores constrain temperatures at >550°C and <300°C, respectively. Features such as (1) low galena–sphalerite interfacial angles, (2) presence of multiphase sulfide–sulfosalt inclusions, (3) microcracks filled with galena (±pyrargyrite) without any hydrothermal alteration, and (4) high contents of Zn, Ag (and Sb) in galena, indicate partial melting in the PbS–Fe_0.96S–ZnS–(1% Ag₂S ± CuFeS₂) system, which was critical for metamorphic remobilization of the Rampura–Agucha deposit.     

Subvolcanic gabbro–porphyrite and intrusive diorite,and sulfide mineralization of the Dzhusa volcanogenic massive sulfide deposit (Southern Urals)

Two sequentially formed groups of dikes in the gabbro–porphyrite complex have been distinguished, the ages of which are early Eifelian (early dikes) and early Givetian (late dikes). We have estimated the temperature impact of ore contact metamorphism, which is related to dikes of the Lower Carboniferous Magnitogorsk intrusive complex. A hidden zonality of microimpurities in the ore-forming minerals has been established for the first time by the LA-ICP-MS method. The ore formation age has been determined as early Eifelian–early Givetian.     

Modeling and predicting of drainage quality for sulfide mine tailings impoundments

Effluent from tailings impoundments of sulfide mine is an important environmental problem. The oxidation of sulfide minerals in tailings impoundments and consequent release of acid and contaminants, including heavy metals and arsenic, to tailings pore-water can last for decades to centuries. Pollution of water bodies including surface water and groundwater occurs when infiltration of precipitation is unhindered, bottom liners are absent and no drainage collection is installed. So there is a great need to develop reliable modeling techniques for characterizing geochemical interactions taking place within the tailings and predicting potential future environmental hazard which favor further prevention and remediation of the acidic mine drainage （AMD）. In this paper, a comprehensive dynamic model for tailings-water interaction was established on the basis of considering the coupling and feedback among many factors and processes such as sulfide oxidation, gangue dissolution, oxygen diffusion, water flow and mass transport,     

An experimental study of Fe–Ni exchange between sulfide melt and olivine at upper mantle conditions: implications for mantle sulfide compositions and phase equilibria

The behavior of nickel in the Earth’s mantle is controlled by sulfide melt–olivine reaction. Prior to this study, experiments were carried out at low pressures with narrow range of Ni/Fe in sulfide melt. As the mantle becomes more reduced with depth, experiments at comparable conditions provide an assessment of the effect of pressure at low-oxygen fugacity conditions. In this study, we constrain the Fe–Ni composition of molten sulfide in the Earth’s upper mantle via sulfide melt–olivine reaction experiments at 2 GPa, 1200 and 1400 °C, with sulfide melt \(X_{{{\text{Ni}}}}^{{{\text{Sulfide}}}}=\frac{{{\text{Ni}}}}{{{\text{Ni}}+{\text{Fe}}}}\) (atomic ratio) ranging from 0 to 0.94. To verify the approach to equilibrium and to explore the effect of \({f_{{{\text{O}}_{\text{2}}}}}\) on Fe–Ni exchange between phases, four different suites of experiments were conducted, varying in their experimental geometry and initial composition. Effects of Ni secondary fluorescence on olivine analyses were corrected using the PENELOPE algorithm (Baró et al., Nucl Instrum Methods Phys Res B 100:31–46, 1995), “zero time” experiments, and measurements before and after dissolution of surrounding sulfides. Oxygen fugacities in the experiments, estimated from the measured O contents of sulfide melts and from the compositions of coexisting olivines, were 3.0?±?1.0 log units more reduced than the fayalite–magnetite-quartz (FMQ) buffer (suite 1, 2 and 3), and FMQ ??1 or more oxidized (suite 4). For the reduced (suites 1–3) experiments, Fe–Ni distribution coefficients \(K_{{\text{D}}}^{{}}=\frac{{(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}/X_{{{\text{Fe}}}}^{{{\text{sulfide}}}})}}{{(X_{{{\text{Ni}}}}^{{{\text{olivine}}}}/X_{{{\text{Fe}}}}^{{{\text{olivine}}}})}}\) are small, averaging 10.0?±?5.7, with little variation as a function of total Ni content. More oxidized experiments (suite 4) give larger values of K_D (21.1–25.2). Compared to previous determinations at 100 kPa, values of K_D from this study are chiefly lower, in large part owing to the more reduced conditions of the experiments. The observed difference does not seem attributable to differences in temperature and pressure between experimental studies. It may be related in part to the effects of metal/sulfur ratio in sulfide melt. Application of these results to the composition of molten sulfide in peridotite indicates that compositions are intermediate in composition (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.4–0.6) in the shallow mantle at 50 km, becomes more Ni rich with depth as the O content of the melt diminishes, reaching a maximum (0.6–0.7) at depths near 80–120 km, and then becomes more Fe rich in the deeper mantle where conditions are more reduced, approaching (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.28)?>?140 km depth. Because Ni-rich sulfide in the shallow upper mantle melts at lower temperature than more Fe-rich compositions, mantle sulfide is likely molten in much of the deep continental lithosphere, including regions of diamond formation.     

A laser ablation ICP-MS study of platinum-group and chalcophile elements in base metal sulfide minerals of the Jinchuan Ni–Cu sulfide deposit,NW China

The paper presents concentrations of the platinum-group and chalcophile elements in the base metal sulfides (BMS) from the Jinchuan Ni–Cu sulfide deposit determined by laser ablation-inductively coupled plasma-mass spectrometry. Mass balance calculations reveal that pentlandite hosts a large proportion of Co, Ni and Pd (> 65%), and that pentlandite and pyrrhotite accommodate significant proportions of Re, Os, Ru, Rh, and Ag (~ 35–90%), whereas chalcopyrite contains a small amount of Ag (~ 10%) but negligible platinum-group elements. Iridium and Pt are not concentrated in the BMS and mostly occur in As-rich platinum-group minerals. The enrichments of Co, Ni, Re, Os, Ru, and Rh in pentlandite and pyrrhotite, and Cu in chalcopyrite are consistent with the fractionation of sulfide liquid and exsolution of pentlandite and pyrrhotite from the mono-sulfide solid solution (MSS). The Ir-bearing minerals exsolved from the MSS, depleting pentlandite and pyrrhotite in Ir, whereas sperrylite exsolved from the residual sulfide liquid on cooling. Diffusion of Pd from residual sulfide liquid into pentlandite during its exsolution from the MSS and crystallization of Pt-bearing minerals in the residual sulfide liquid resulted in the enrichment of Pd in pentlandite and decoupling between Pd and Pt in the Jinchuan net-textured and massive ores.     

Se and In minerals in the submarine oxidation zone of a massive sulfide orebody of the molodezhnoe copper–zinc massive sulfide deposit,Southern Urals

For the first time, extremely high Se and In contents were determined for the pinches of massive sulfide orebodies that are composed of small-clastic layered sulfide sediments transformed during submarine supergenesis. Se (clausthalite and naumannite) and In (roquesite) minerals were found. Hydrothermal chalcopyrite, a significant amount of which is present in the clasts of paleohydrothermal black smoker chimneys, was the source of Se. Most of the amount of In was contributed during dissolution of clasts of hydrothermal sphalerite, which is unstable in the submarine oxidation zone in the presence of oxidized pyrite.     

Disseminated gold–sulfide mineralization at the Zhaima deposit,eastern Kazakhstan

The Zhaima gold–sulfide deposit is located in the northwestern part of the West Kalba gold belt in eastern Kazakhstan. The mineralization is hosted in Lower Carboniferous volcanic and carbonate rocks formed under conditions of marginal-sea and island-arc volcanic activity. The paper considers the mineralogy and geochemistry of primary gold–sulfide ore and Au-bearing weathering crusts. Au-bearing arsenopyrite–pyrite mineralization formed during only one productive stage. Disseminated, stringer–disseminated, and massive rocks are enriched in Ti, Cr, V, Cu, and Ni, which correspond to the mafic profile of basement. The main ores minerals are represented by finely acicular arsenopyrite containing Au (up to few tens of ppm) and cubic and pentagonal dodecahedral pyrite with sporadic submicroscopic inclusions of native gold. The sulfur isotopic composition of sulfides is close to that of the meteoritic standard (δ³⁴S =–0.2 to +0.2). The ⁴⁰Ar/³⁹Ar age of three sericite samples from ore veinlets corresponds to the Early Permian: 279 ± 3.3, 275.6 ± 2.9, and 272.2 ± 2.9 Ma. The mantle source of sulfur, ore geochemistry, and spatial compatibility of mineralization with basic dikes allow us to speak about the existence of deep fluid–magmatic systems apparently conjugate with the Tarim plume.     

Secondary mineral-forming processes in natural—anthropogenic hydrogeological systems at sulfide deposits. Simulation of the origin of the phase (Fe,Mg)SO4 · 7H2O in the course of sulfide oxidation at the Degtyarka copper sulfide deposit

Data on the decommissioned Degtyarka Cu sulfide deposit, Urals, confirm the hypothesis that the flooding of abandoned mine workings is associated with the synthesis of secondary sulfates. Numerical simulation of hydrogeochemical processes in the rock—water system imitating the flooding of an underground void makes it possible to evaluate the conditions under which kirovite (Fe,Mg)SO₄ · 7H₂O and melanterite are formed at the oxidation of ore sulfides. Secondary sulfates are formed when the redox potential of the system is transformed from reducing to oxidizing within the stability field of Fe(II) species. The Fe/Mg ratio of the kirovite (Fe,Mg)SO₄ · 7H₂O is controlled first of all by the percentage of sulfides in the rock—water system, the rock/water ratio, the openness of the system with respect to atmospheric gases, and the temperature.     

Thermochemistry of sulfide liquids III: Ni-bearing liquids at 1 bar

Experiments were performed in the system O–S–Fe–Ni designed to extend our understanding of the chemistry of sulfide liquids. Results indicate that adding nickel to Fe-rich sulfide liquids in equilibrium with silicate liquids extends their stability field to much higher oxygen fugacities and lower sulfur fugacities. Increasing Ni/Fe at a given temperature and sulfur and oxygen fugacity is accompanied by a significant decrease in the oxygen content of the sulfide liquid. Results of these experiments are combined with data from the literature to calibrate an associated regular solution model for O–S–Fe–Ni liquids. This model represents a complete refit of the associated regular solution model of Kress (Contrib Mineral Petrol 139:316–325, 2000). The resulting model is combined with the olivine solution model of Hirschmann (Am Mineral 76:1232–1248, 1991) to explore the effect of variations in oxygen and sulfur fugacities on the distribution of Fe and Ni between olivine and sulfide liquid. Predicted olivine–sulfide distribution trends parallel those observed by Gaetani and Grove (Geochim Cosmochim Acta 61:1829–1846, 1997), Gaetani and Grove (Earth Planet Sci Lett 169:147–163, 1999), Brenan and Caciagli (Geochim Cosmochim Acta 64:307–320, 2000) and Brenan (Geochim Cosmochim Acta 67:2663–2681, 2003), but are systematically offset toward lower predicted Ni in the sulfide. Nevertheless our results are consistent with the assertion that low K _D ^os values in magmatic ore deposits such as the J-M Reef reflect high iron contents in the sulfides combined with relatively high oxygen fugacities.

---

Geochemistry of the Kalatongke Ni–Cu–(PGE) sulfide deposit,NW China: implications for the formation of magmatic sulfide mineralization in a postcollisional environment

The Kalatongke (also spelt as Karatungk) Ni–Cu–(platinum-group element, PGE) sulfide deposit, containing 33 Mt sulfide ore with a grade of 0.8 wt.% Ni and 1.3 wt.% Cu, is located in the Eastern Junggar terrane, Northern Xinjiang, NW China. The largest sulfide ore body, which occupies more than 50 vol.% of the intrusion Y1, is dominantly comprised of disseminated sulfide with a massive sulfide inner zone. Economic disseminated sulfides also occur at the base of the intrusions Y2 and Y3. The main host rock types are norite in the lower part and diorite in the upper part of each intrusion. Enrichment in large ion lithophile elements and depletion in heavy rare earth elements relative to mid-ocean ridge basalt indicate that the mafic intrusions were produced from magmas derived from a metasomatized garnet lherzolite mantle. The average grades of the disseminated ores are 0.6 wt.% Ni and 1.1 wt.% Cu, whereas those of the massive ores are 2 wt.% Ni and 8 wt.% Cu. The PGE contents of the disseminated ores (14–69 ppb Pt and 78–162 ppb Pd) are lower than those of the massive ores (120–505 ppb Pt and 30–827 ppb Pd). However, on the basis of 100% sulfide, PGE contents of the massive sulfides are lower than those of the disseminated sulfides. Very high Cu/Pd ratios (>4.5 × 10⁴) indicate that the Kalatongke sulfides segregated from PGE-depleted magma produced by prior sulfide saturation and separation. A negative correlation between the Cu/Pd ratio and the Pd content in 100% sulfide indicates that the PGE content of the sulfide is controlled by both the PGE concentrations in the parental silicate magma and the ratio of the amount of silicate to sulfide magma. The negative correlations between Ir and Pd indicate that the massive sulfides experienced fractionation.     

New data on the Pb isotope composition of Noril’sk sulfide ores

Doklady Earth Sciences -     

Tectono-metallogenic settings of the formation and convergence of disseminated Au–sulfide mineralization

Large Au-sulfide deposits (GSDs) of disseminated ores occur worldwide in metallogenic provinces of various ages (from Precambrian to Pliocene). The studies performed showed that the great genetic diversity of GSD is determined by the similar oregenesis conditions that appear in different tectono-metallogenic settings (TMSs). A GSD is included in a certain TMS by the respective changes in the mineral and geochemical assemblages of ores. However, in the majority of cases, the GSDs of different TMSs are convergent (quasi-identical) in the texture, structure, and mineral composition of ores. All types of the above TMSs are found in Russia, which allows forecasting the discovery of new GSDs in each setting.     

Audio-magnetotelluric investigation of sulfide mineralization in Proterozoic–Archean greenstone belts of Eastern Indian Craton

Greenstone belts are well known for gold occurrences at different regions of the world. The Dhanjori basin in the eastern Singhbhum region shows major characteristics of a rifted greenstone belt. Initially, we conducted 14 audio-magnetotelluric (AMT) measurements for a profile of \(\sim \)20 km in the frequency range of 1 kHz to 10 Hz over this rather complex geologic environment covering Dhanjori Volcanics (DhV) and Kolhan Group (KG). Subsequently, gravity and magnetic surveys were also conducted over this AMT profile. The purpose of the survey was to identify and map conductive features and to relate them to metallogeny of the area along with the mapping of the basement of Dhanjori basin. The strike analysis showed \(\hbox {N30}^{\circ }\hbox {W}\) strike for DhV for all the frequencies and for sites over KG domain in the frequency range of 100–10 Hz, but for KG domain, the obtained strike in 1 kHz to 100 Hz is \(\hbox {N45}^{\circ }\hbox {E}\). As the combination of transverse electric (TE), transverse magnetic (TM) and tipper (Tzy) can recover the electrical signature in complex geological environment, we discuss the conductivity model obtained from TE+TM+Tzy only. The inversion was carried for the regional profile with 14 sites and for 7 sites over KG domain. Conductivity model shows two well resolved conductors, one each in KG and Quartz Pebble Conglomerate Dhanjori (QPCD) domains respectively showing common linked concordant features between these regional and KG profiles. The conductors are interpreted as sulfide mineralization linked with QPCD group of rocks which may host gold. These conductors are also horizontally disposed due to the intrusive younger Mayurbhanj Granite. These intrusives correlate well with the gravity modeling as well. The thickness of the Dhanjori basin at the central is about 3.0 km, similar to that from gravity modeling. The conductivity model also indicates the presence of shallow conductors, but could not be resolved due to lack of high frequency data. However, the results from the close-by drill site indicate the presence of shallow sulfide mineralization hosting gold. The deep level conductors delineated from AMT studies are associated with gravity high and low magnetic. ICP-AES results of Dhanjori samples show significant concentration of gold \(\sim \)5.0 g/t, which is of economic consideration. Thus, it can be inferred that the conductors have evidences of sulfide mineralization which host gold.     

Gold in the Brunswick No. 12 volcanogenic massive sulfide deposit,Bathurst Mining Camp,Canada: Evidence from bulk ore analysis and laser ablation ICP─MS data on sulfide phases

The 329-Mt Brunswick No. 12 volcanogenic massive sulfide deposit (total resource of 163 Mt at 10.4% Zn, 4.2% Pb, 0.34% Cu, and 115 g/t Ag) is hosted within a Middle Ordovician bimodal volcanic and sedimentary sequence. Massive sulfides are for the most part syngenetic, and the bulk of the sulfide ore occurs as a Zn–Pb-rich banded sulfide facies that forms an intimate relationship with a laterally extensive Algoma-type iron formation and defines the Brunswick Horizon. Zone refining of stratiform sulfides is considered to have resulted in the development of a large replacement-style Cu-rich basal sulfide facies, which is generally confined between the banded sulfide facies and an underlying stringer sulfide zone. Complex polyphase deformation and associated lower- to upper-greenschist facies regional metamorphism is responsible for the present geometry of the deposit. Textural modification has resulted in a general increase in grain size through the development of pyrite and arsenopyrite porphyroblasts, which tend to overprint primary mineral assemblages. Despite the heterogeneous ductile deformation, primary features have locally been preserved, such as fine-grained colloform pyrite and base and precious metal zonation within the Main Zone. Base metal and trace element abundances in massive sulfides from the Brunswick No. 12 deposit indicate two distinct geochemical associations. The basal sulfide facies, characterized by a proximal high-temperature hydrothermal signature (Cu–Co–Bi–Se), contains generally low Au contents averaging 0.39 ppm (n = 34). Conversely, Au is enriched in the banded sulfide facies, averaging 1.1 ppm Au (n = 21), and is associated with an exhalative suite of elements (Zn–Pb–As–Sb–Ag–Sn). Finely laminated sulfide lenses hosted by iron formation at the north end of the Main Zone are further enriched in Au, averaging 1.7 ppm (n = 41) and ranging up to 8.2 ppm. Laser ablation inductively coupled plasma-mass spectrometry (ICP-MS) analyses of pyrite (n = 97) from the north end of the Main Zone average 2.6 ppm Au and range from the detection limit (0.015 ppm) to 21 ppm. Overall, these analyses reveal a distinct Au–Sb–As–Ag–Hg–Mn association within pyrite grains. Gold is strongly enriched in large pseudo-primary masses of pyrite that exhibit relict banding and fine-grained cores; smaller euhedral pyrite porphyroblasts, and euhedral rims of metamorphic origin surrounding the pyrite masses, contain much less Au, Sb, Ag, As, and Sn. Arsenopyrite, occurring chiefly as late porphyroblasts, contains less Au, averaging 1.0 ppm and ranging from the detection limit (0.027 ppm) to 6.9 ppm. Depth profiles for single-spot laser ablation ICP-MS analyses of pyrite and arsenopyrite display uniform values of Au and an absence of discrete microscopic inclusions of Au-bearing minerals, which is consistent with chemically bonded Au in the sulfide structure. The pervasive correlation of Au with Sn in the Zn–Pb-rich banded sulfide facies suggests similar hydrothermal behavior during the waxing stages of deposition on the seafloor. Under high temperature (>350oC) and moderate- to low-pH conditions, Au and Sn in hydrothermal fluids would be transported as chlorocomplexes. An abrupt decrease in temperature and aH₂S, accompanied by an increase in fO₂ and pH during mixing with seawater, would lead to the simultaneous destabilization of both Au and Sn chlorocomplexes. The enrichment of Au in fine-grained laminated sulfides on the periphery of the deposit, accompanied by sporadic occurrences of barite and Fe-poor sphalerite, supports lower hydrothermal fluid temperatures analogous to white smoker activity on the flanks of a large volcanogenic massive sulfide system. In lower temperature (<350oC) and mildly acidic hydrothermal fluids, Au would be transported by thiocomplexes, which exhibit multifunctional (retrograde–prograde) solubility and a capacity to mobilize Au to the outer parts of the sulfide mound. The sluggish nature of this low-temperature venting together with larger variations in ambient fO₂ could lead to a sharp enrichment of Au towards the stratigraphic hanging wall of massive sulfide deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Re–Os pseudo-isochron of disseminated ore from the Kalatongke Cu–Ni sulfide deposit,Xinjiang, Northwest China: Implications for Re–Os dating of magmatic Cu–Ni sulfide deposits

Re–Os dating of disseminated ore from the Kalatongke Cu–Ni sulfide mineral deposit, Xinjiang, Northwest (NW) China, yields an apparent isochron age of 433 ± 31 Ma with an apparent initial ¹⁸⁷Os/¹⁸⁸Os (433 Ma) ratio of 0.197 ± 0.027. This apparent age is older than not only the zircon U–Pb age of the host intrusion (287 ± 5 Ma, Han et al., 2004) but also the stratigraphic age of the intruded country rock. Thus, the regression line is a pseudo-isochron. However, previous Re–Os dating of massive ores of the same deposit yielded an age that is consistent, within analytical uncertainty, with the zircon U–Pb age (Zhang et al., 2008). This relationship is similar to that observed in the Jinchuan deposit, NW China. Therefore, we suggested that the same mechanism, post-segregation diffusion of Os (Yang et al., 2008), is applicable to the Kalatongke deposit.Re–Os isotopic studies of Kalatongke, Jinchuan and representative magmatic Cu–Ni sulfide deposits suggest that the massive ores of mafic–ultramafic-rock-associated Cu–Ni sulfide deposits would yield geologically meaningful Re–Os age, whereas a pseudo-isochron would be obtained for the disseminated ores. Therefore, to obtain a geologically meaningful Re–Os age, the type of the deposit, the type of the ore and the ore-forming process should be taken into account.     

Controls on disseminated PGE–Cu–Ni sulfide mineralization within the Rietfontein deposit,Eastern Limb,Bushveld Complex,South Africa: Implications for the formation of contact-type magmatic sulfide deposits

The Rietfontein platinum group element (PGE)–Cu–Ni sulfide deposit of the Eastern Limb of the Bushveld Complex hosts disseminated contact-style mineralization that is similar to other economic magmatic sulfide deposits in marginal settings within the complex. The mineralization at Rietfontein consists of disseminated PGE-bearing base metal sulfides that are preferentially located at the contact between a distinct package of marginal norites overlain by a thick heterogeneous unit dominated by gabbronorites with lesser norites and ultramafic rocks. Down-hole composite data and metal scatterplots indicate that the PGE correlate well with Ni, Cu and S and that only minor metal remobilization has taken place within the basal norite sequence. Plots of (Nb/Th)_PM vs. (Th/Yb)_PM indicate that the melts that formed the Rietfontein intrusive sequence were strongly crustally contaminated prior to emplacement at Rietfontein, whereas inverse relationships between PGE tenors and S/Se ratios indicate that these magmas assimilated crustal S, causing S-saturation and the formation of immiscible sulfides under high R-factor conditions that generated high PGE tenor sulfides. Reverse zoning of cumulus minerals at Rietfontein suggests that fresh primitive melts were introduced to a partially fractionated staging chamber. The introduction of new magmas into the chamber caused overpressure and the forced evacuation of the contents of the chamber, leading to the emplacement of the existing magmas within the staging chamber at Rietfontein in two separate pulses. The first pulse of magma contained late-formed cumulus phases, including low Mg# orthopyroxene and plagioclase, was emplaced between footwall unreactive and S-poor Pretoria Group quartzites and a hangingwall sequence of Rooiberg Group felsites, and was rapidly chilled to form the basal norite sequence at Rietfontein. The second pulse of magma contained early formed cumulus phases, including olivine, chromite, and high Mg# orthopyroxene, and was emplaced above the chilled norite sequence as a crystal mush to form gabbronorites and ultramafic rocks. This second pulse of magma also contained PGE-bearing base metal sulfides that accumulated at the contact between this second batch of magma and the already chilled basal norite sequence. The formation of Platreef-type mineralization outside of the Northern Limb of the Bushveld Complex confirms there are a number of areas within the Bushveld Complex that are prospective for this style of mineralization.     

In-bearing potential of tin‒sulfide mineralization in ore deposits of the Russian Far East

The increased demand for indium has made it necessary to revise prospects of In-bearing tin ore deposits in the Russian Far East on the basis of geological data and results of recent analytical methods (X-ray fluorescence with synchrotron radiation, atomic absorption, and ICP-MS). The average In contents in ores of the Tigrinoe and Pravourmiiskoe deposits vary from 55 to 70 ppm, which allows tin ore deposits with Sn?sulfide mineralization to be considered as quite promising with respect to In production from ores of Russian deposits. By their estimated In reserves, the Tigrinoe and Pravourmiiskoe deposits may be attributed to large ore objects.     

Influence of freeze–thaw dynamics on internal geochemical evolution of low sulfide waste rock

Continuous monitoring of a 15 m high heavily instrumented experimental waste rock pile (0.053 wt.% S) since 2006 at the Diavik diamond mine in northern Canada provided a unique opportunity to study the evolution of fresh run-of-mine waste rock as it evolved over annual freeze–thaw cycles. Samples were collected from soil water solution samplers to measure pore water properties, from twelve 4 to 16 m² basal collection lysimeters to measure basal leachate properties in the region underlying the crest of the pile (the core), and from basal drains to measure aggregate total pile leachate properties. By 2012, monitoring of pore water geochemistry within the core structure of the test pile revealed an apparent steady state with respect to weathering geochemistry, represented by (i) a flush of pre-existing blasting residuals and applied tracers, (ii) declining pH, (iii) a stepwise progression and subsequent equilibrium with acid-neutralizing phases (depletion of available carbonates; equilibrium with respect to aluminum hydroxide phases and subsequent iron (III) hydroxide phases), and (iv) concordant release of SO₄, major cations (Ca, Mg, K, Na, Si), and trace metals (Al, Fe, Ni, Co, Cu, Zn). Distinct, high concentration ‘spring flushes’, characteristic of drainage in northern environments and primarily explained by a combination of fluid residence time and the build-up of oxidation products over the winter, were released from core drainage each season. Following the initial flush, the concentration of all dissolved constituents steadily declined, with distinct minimums prior to freeze-up. The opposite trend was observed in the cumulative pile drainage, in which early season leachate dominated by snowmelt and batter flow had low concentrations and late season leachate dominated by contributions from the core of the pile (indicated by season end merging of core and cumulative drainage geochemistry) had higher concentrations. Northern waste rock pile drainage geochemistry is strongly influenced by freeze–thaw cycling and varying core and batter subsystem contributions to total drainage. A comprehensive understanding of thermal cycling in waste rock piles is an important component of temporal predictions of drainage water composition based on up-scaling or reactive transport modeling.