Planform architecture,stratigraphic signature and morphodynamics of an exhumed Jurassic meander plain (Scalby Formation,Yorkshire, UK)

Modern fluvial meander plains exhibit complex planform transformations in response to meander‐bend expansion, downstream migration and rotation. These transformations exert a fundamental control on lithology and reservoir properties, yet their stratigraphic record has been poorly evaluated in ancient examples due to the lack of extensive three‐dimensional exposures. Here, a unique exhumed meander plain exposed to the north of Scarborough (Yorkshire, UK) is analysed in terms of architecture and morphodynamics, with the aim of developing a comprehensive model of facies distribution. The studied outcrop comprises tidal platforms and adjacent cliffs, where the depositional architecture of un‐tilted deposits was assessed on planform and vertical sections, respectively. In its broader perspective, this study demonstrates the potential of architectural mapping of extensive planform exposures for the reconstruction of ancient fluvial morphodynamics. The studied exhumed meander plain is part of the Scalby Formation of the Ravenscar Group, and originally drained small coastal incised valleys within the Jurassic Cleveland Basin. The meander plain is subdivided into two storeys that contain in‐channel and overbank architectural elements. In‐channel elements comprise expansional and downstream‐migrating point bars, point‐bar tails and channel fills. Overbank elements comprise crevasse complexes, levées, floodplain fines and lake fills. The evolution of the point bars played a significant role in dictating preserved facies distributions, with high flood‐stage nucleation and accretion of meander scrolls later reworked during waning flood‐stages. At a larger scale, meander belt morphodynamics were also a function of valley confinement and contrasts in substrate erodibility. Progressive valley infilling decreased the valley confinement, promoting the upward transition from prevalently downstream migrating to expansional meander belts, a transition associated with enhanced preservation of overbank elements. Strikingly similar relations between valley confinement, meander‐bend transformations and overbank preservation are observed in small modern meandering streams such as the Beaver River of the Canadian prairies and the Powder River of Montana (USA).     

Recognizing the product of concave-bank sedimentary processes in fluvial meander-belt strata

Downstream migration of point bars is an important process in meander belts. Inherent to downstream migration is sediment accumulation in concave channel banks, immediately adjacent to and downstream of convex point bars. Despite this, associated concave bank processes are often overlooked, with depositional products sparsely identified in the stratigraphic record. Counter-point-bar deposits are a type of concave-bank deposit that have been positively identified in subsurface three-dimensional seismic datasets, yet outcrop examples are not well-constrained. This study characterizes and establishes recognition criteria of counter-point-bar deposits in outcrop using extensive exposure of Late-Cretaceous meander-belt deposits in eastern Alberta, Canada. Using a combination of traditional field-based sedimentological analyses and three-dimensional outcrop mapping with an Uncrewed Aerial Vehicle and Structure-from-Motion photogrammetry, point bar, counter-point bar, and associated abandoned-channel deposits, as well as adjacent floodplain deposits are identified. Bed-scale characteristics of counter-point-bar deposits include interlaminated and interbedded siltstone and fine-grained sandstone, abundant organic detritus, and evidence of deformation and slumping. At the bend scale, accretion packages bounded by internal erosion surfaces are composed of dipping siltstone and minor sandstone beds that extend from the top to the base of the meander belt. At the belt scale, positive identification relies on concave accretion surface mapping, their orientation relative to the meander-belt edge (i.e. dipping away), and consideration of meander-bend evolution. These results have implications for recognition of counter-point-bar deposits in analogous, less-constrained data sets, which provides a foundation for more complete palaeoenvironmental interpretations.     

Recognition and significance of sharp‐based mouth‐bar deposits in the Eocene Green River Formation,Uinta Basin,Utah

Sandstone bodies in the Sunnyside Delta Interval of the Eocene Green River Formation, Uinta Basin, previously considered as point bars formed in meandering rivers and other types of fluvial bars, are herein interpreted as delta mouth‐bar deposits. The sandstone bodies have been examined in a 2300 m long cliff section along the Argyle and Nine Mile Canyons at the southern margin of the Uinta lake basin. The sandstone bodies occur in three stratigraphic intervals, separated by lacustrine mudstone and limestone. Together these stratigraphic intervals form a regressive‐transgressive sequence. Individual sandstone bodies are texturally sharp‐based towards mudstone substratum. In proximal parts, the mouth‐bar deposits only contain sandstone, whereas in frontal and lateral positions mudstone drapes separate mouth‐bar clinothems. The clinothems pass gradually into greenish‐grey lacustrine mudstone at their toes. Horizontally bedded or laminated lacustrine mudstone onlaps the convex‐upward sandstone bars. The mouth‐bar deposits are connected to terminal distributary channel deposits. Together, these mouth‐bar/channel sandstone bodies accumulated from unidirectional jet flow during three stages of delta advance, separated by lacustrine flooding intervals. Key criteria to distinguish the mouth‐bar deposits from fluvial point bar deposits are: (i) geometry; (ii) bounding contacts; (iii) internal structure; (iv) palaeocurrent orientations; and (v) the genetic association of the deposits with lacustrine mudstone and limestone.     

Architecture of an Oligocene fluvial ribbon sandstone in the Ebro Basin,North‐eastern Spain

Fluvial ribbon sandstone bodies are ubiquitous in the Ebro Basin in North‐eastern Spain; their internal organization and the mechanics of deposition are as yet insufficiently known. A quarrying operation in an Oligocene fluvial ribbon sandstone body in the southern Ebro Basin allowed for a three‐dimensional reconstruction of the sedimentary architecture of the deposit. The sandstone is largely a medium‐grained to coarse‐grained, moderately sorted lithic arenite. In cross‐section, the sandstone body is 7 m thick, occupies a 5 m deep incision and wedges out laterally, forming a ‘wing’ that intercalates with horizontal floodplain deposits in the overbank region. Three architectural units were distinguished. The lowest and highest units (Units A and C) mostly consist of medium‐grained to coarse‐grained sandstone with medium‐scale trough cross‐bedding and large‐scale inclined stratasets. Each of Units A and C comprises a fining‐up stratal sequence reflecting deposition during one flood event. The middle unit (Unit B) consists of thinly bedded, fine‐grained sandstone/mudstone couplets and represents a time period when the channel was occupied by low‐discharge flows. The adjoining ‘wing’ consists of fine‐grained sandstone beds, with mudstone interlayers, correlative to strata in Units A and C in the main body of the ribbon sandstone. In plan view, the ribbon sandstone comprises an upstream bend and a downstream straight reach. In the upstream bend, large‐scale inclined stratasets up to 3 m in thickness represent four bank‐attached lateral channel bars, two in each of Units A and C. The lateral bars migrated downflow and did not develop into point bars. In the straight downstream reach, a tabular cross‐set in Unit A represents a mid‐channel transverse bar. In Unit C, a very coarse‐grained, unstratified interval is interpreted as deposited in a riffle zone, and gives way downstream to a large mid‐channel bar. The relatively simple architecture of these bars suggests that they developed as unit bars. Channel margin‐derived slump blocks cover the upper bar. The youngest deposit is fine‐grained sandstone and mudstone that accumulated immediately before avulsion and channel abandonment. Deposition of the studied sandstone body reflects transport‐limited sediment discharges, possibly attaining transient hyperconcentrated conditions.     

Preservation of meandering river channels in uniformly aggrading channel belts

Channel belt deposits from meandering river systems commonly display an internal architecture of stacked depositional features with scoured basal contacts due to channel and bedform migration across a range of scales. Recognition and correct interpretation of these bounding surfaces is essential to reconstruction of palaeochannel dimensions and to flow modelling for hydrocarbon exploration. It is therefore crucial to understand the suite of processes that form and transfer these surfaces into the fluvial sedimentary record. Here, the numerical model ‘NAYS2D’ is used to simulate a highly sinuous meandering river with synthetic stratigraphic architectures that can be compared directly to the sedimentary record. Model results highlight the importance of spatial and temporal variations in channel depth and migration rate to the generation of channel and bar deposits. Addition of net uniform bed aggradation (due to excess sediment input) allows quantification of the preservation of meander morphology for a wide range of depositional conditions. The authors find that the effect of vertical variation in scouring due to channel migration is generally orders of magnitude larger than the effect of bed aggradation, which explains the limited impact bed aggradation has on preservation of meander morphology. Moreover, lateral differences in stratigraphy within the meander belt are much larger than the stratigraphic imprint of bed aggradation. Repeatedly produced alternations of point bar growth followed by cut‐off result in a vertical trend in channel and scour feature stacking. Importantly, this vertical stacking trend differs laterally within the meander belt. In the centre of the meander belt, the high reworking intensity results in many bounding surfaces and disturbed deposits. Closer to the margins, reworking is infrequent and thick deposits with a limited number of bounding surfaces are preserved. These marginal areas therefore have the highest preservation potential for complete channel deposits and are thus best suited for palaeochannel reconstruction.     

An integrated approach to determine three‐dimensional accretion geometries of tidal point bars: Examples from the Venice Lagoon (Italy)

Low rates of lateral migration (centimetres to decimetres per year) combined with relatively high rates of vertical accretion (millimetres to centimetres per year) recorded in microtidal channels of the Venice Lagoon (Italy) give rise to point‐bar geometries and internal facies arrangements that differ substantially from widely accepted models of point‐bar sedimentary architecture. In this study, field data from the Venice Lagoon are combined with a three‐dimensional forward stratigraphic model, the ‘Point‐Bar Sedimentary Architecture Numerical Deduction’ (PB‐SAND), to predict the stratal geometries of point bars formed in aggradational settings. The PB‐SAND uses a combined geometric and stochastic modelling approach that can be constrained by field evidence. The model applied determines the geometry of four point bars generated by 9 to 11 m wide channels cutting through salt marshes. An iterative best‐fit modelling approach has been used to obtain multiple simulations for each case study, each of which fits the observations derived from the analysis of time‐series historical aerial photographs and 44 sedimentary cores. Results demonstrate how the geometry of the bars is determined by the development of two key stratal surfaces: the point‐bar brink and channel‐thalweg surfaces. These surfaces are defined by the progressive translation and vertical shift of the point‐bar brink (i.e. break of slope between bar top and bar slope) and the channel thalweg (i.e. deepest part of the channel) during bar evolution. The approach is used to: (i) reconstruct three‐dimensional point‐bar geometries; (ii) propose alternative reconstructions; (iii) provide insight to drive the acquisition of additional data to better constrain the proposed models; and (iv) provide insight into the mechanism of bar growth for slowly migrating channels in settings subject to relatively high rates of aggradation. This study highlights how interaction between styles of planform transformation and latero‐vertical shifts of meandering channels can determine the geometry of related sedimentary bodies.     

Tidal currents and wind waves controlling sediment distribution in a subtidal point bar of the Venice Lagoon (Italy)

The present study aims to improve current understanding of the sedimentation of subtidal point bars, analyzing interaction between tidal currents and waves in shaping a submerged meander bend of the microtidal Venice Lagoon (Italy), and it is based on coupling of sedimentological studies, geophysical analyses and numerical modelling. The Venice Lagoon is characterized by an average depth of about 1·5 m over subtidal platforms and a mean tidal range of about 1·0 m. The morphodynamic evolution of the lagoon is strongly affected by intense seasonal windstorms, which promote the formation of wind waves triggering sediment resuspension and bottom erosion. The study channel is 70 to 100 m wide, it has a radius of curvature of about 260 m and cuts through a permanently submerged subtidal platform. Water depth ranges from 1·0 to 5·0 m below mean sea level on the subtidal platform and channel thalweg, respectively. Different from classical architectural models, the study point‐bar beds do not show sigmoidal geometries, but consist of horizontally‐bedded deposits abruptly overlying clinostratified beds. Sedimentation in the study bar is hypothesized to stem from the interaction between the in‐channel secondary helical flow, as for most meander bends, and wave winnowing of the subaqueous overbank areas. Laterally accreting point‐bar deposits point out that the curvature‐induced helical flow redistributed sediment from the channel thalweg to the bar top and contributed to the development of the ‘classical’ fining‐upward grain size trend. The marked truncation surface, separating clinostratified bar deposits from overlying horizontally‐bedded platform sediments is interpreted here as due to bar top wave‐winnowing, which also possibly promoted bank collapses. In the proposed model, sediments remobilized from bar top and subaqueous overbank areas were transported into the channel, forming peculiar ‘apron‐like’ accumulations, where sand accumulated through avalanching processes and mud settled down from suspension.     

Precambrian snapshots: Morphodynamics of Torridonian fluvial braid bars revealed by three‐dimensional photogrammetry and outcrop sedimentology

Pre‐vegetation fluvial channels have long been considered predominantly sheet‐like in geometry, owing to hydraulic sections that rapidly widened rather than incise during floods. This motif has been paralleled to that of modern dryland rivers subject to sharp discharge fluctuations during ephemeral floods. However, a number of Precambrian fluvial successions have been recently appraised as the product of deep‐channelled systems characterized by relatively stable – probably perennial – discharge regimes. One such example is the ca 1·0 Ga Applecross Formation, part of the well‐studied Torridon Group of Scotland. To contribute to this debate and to provide refined morphodynamic models for the Applecross Formation, this article presents an integration of three‐dimensional photogrammetry and outcrop sedimentology applied to key exposures at Stoer Peninsula, north‐western Scottish Highlands. Analysis of selected sandbodies reveals that high‐relief fluvial sand bars, both mid‐channel and bank‐attached, evolved within deep, braided‐channel belts. These bars grew through complex mechanisms of accretion and reactivation related to different flood stages: upstream and downstream accretion probably occurred during waning‐flood stages characterized by high hydrograph levels and abundant sediment availability; lateral accretion took place during later waning‐flood stages, and it was associated in some cases with helical recirculation and increase in bend sinuosity. Overall, the depicted morphodynamics are consistent with prolonged flood events that cannot be reconciled with sharply fluctuating discharge regimes. Critical comparisons between the internal geometry of the studied bars and modern counterparts corroborate the findings herein. Thus, this study recommends stricter comparisons between the products of modern braided channels and Precambrian fluvial rock records featuring thick and well‐developed bar forms.     

复杂曲流带识别标志及其内部点坝叠加接触模式

以现代沉积为指导,通过岩芯、测井地质、地震沉积学分析研究复杂曲流带边界砂体类型及其内部结构特征,提出了识别地下复杂曲流带的典型标志,即曲流带边界处废弃河道的长度与曲流带边界的长度比值大于65%,尤其在曲流带凹岸一侧此比值超过85%。通过对比分析正演模型、测井地质剖面及分频后地震反射轴的波形及振幅,识别并总结出研究区曲流带内部主要发育点坝主体-初期点坝-初期河道边缘、点坝伊始-废弃河道、点坝伊始-点坝伊始、废弃河道-废弃河道、废弃河道-点坝伊始、末期河道-点坝等点坝间边界叠加类型,并在此基础上建立了研究区曲流带内部结构模式。     

Architecture of a distal pre-vegetation braidplain: Cambrian middle member of the Wood Canyon Formation,southern Marble Mountains,California, USA

Architectural element analysis and detailed mapping of a 300 m along-strike exposure of the middle member Wood Canyon Formation, southern Marble Mountains, California, USA, provides new evidence for extensive braided–fluvial channel-belt deposits with adjacent overbank environments. Three-dimensional models constructed using ‘Structure from Motion’ techniques, combined with field-based observations, allowed interpretation of outcrop-scale trends, barforms, channel fills and fine-scale features. The ca 80 m thick member is divisible into five distinct units, including units M1 to M3 that form the bulk of the stratigraphy. Units are defined by stacking patterns of three facies associations (Facies Association 1 to Facies Association 3), each representing the product of a subenvironment within the fluvial system. In Facies Association 1, stacked cosets, interpreted as low-relief fluvial bars and channel fills, preserve vertical-accretion and downstream-accretion elements under unimodal north-north-west palaeoflow, with minor lateral accretion near bar edges. Deposits of Facies Association 2 to Facies Association 3, linked to overbank environments, are found only in unit M2, in the middle 27 m of the middle member. Floodplains, represented by Facies Association 2, include crumbly red-orange intervals of fine to medium-grained sandstone and thinner sets of cross-bedding than Facies Association 1, interbedded with thicker cross-stratification indicative of overbank splay or overland flow aggradation from adjacent channel belts during flood stage. Possible aeolian beds of Facies Association 3 preserve broad festooned trough cross-strata that average 23 cm in thickness; their small size, medium-grained sandstone and iron oxide cement suggest a high water table. The diverse assemblage of interpreted subenvironments, paired with bedform and facies patterns, implies a perennial fluvial system that gradually built large sand bars as the channel belt migrated and avulsed across an unconfined braided–fluvial reach, leaving the overbank area on its flanks subject to weathering and aeolian transport. Despite the occurrence of strata deposited in low-energy and ponded settings, and a marine influence proposed for nearby sections of middle member, no ichnofossils were encountered.     

基准面旋回控制的河流相储层差异构型模式: 以山西大同侏罗系露头为例

我国河流相储层大多已进入开发后期,急需表征内部复杂构型分布,但目前河流相差异构型模式及控制因素研究还很薄弱,油田区构型表征模式指导不够.因此,以山西大同露头为研究对象,采用露头精细描述与测量、GR测定、粒度分析等方法建立了河流相储层差异构型模式.研究认为:基于砂地比、古水深将露头区划分为9个短期、2个中期基准面旋回,中期基准面旋回不同位置河型差异明显;随着基准面升高与河型的转化,由狭长状心滩坝转变为正常的心滩坝,再过渡窄带状心滩坝或点坝的组合样式,最后演变为马蹄状点坝;3种河型砂坝（心滩坝或点坝）厚度与宽度、砂坝宽度与河道宽度均具有较好的正相关关系.研究成果可为相似露头构型分析提供借鉴,亦可为相似油田区构型精细表征提供模式指导.      

Integrated sedimentology and ichnology of Late Jurassic fluvial point‐bars – facies architecture and colonization styles (Lourinhã Formation,Lusitanian Basin,western Portugal)

Integrated sedimentological and ichnological case studies of ancient meandering river systems have, for the most part, focused on the deposits of the fluvial–tidal transition zone; much less emphasis has been placed on the purely fluvial realm above the landward limit of tidal effects. This problem needs to be addressed so that in future the defining sedimentological and ichnological criteria assigned to ancient fluvial reaches are sufficiently well‐established to enable their separation from the down‐dip fluvial–tidal transition zone. Accordingly, a case study has been carried out on a well‐exposed meander belt deposit from the Late Jurassic Lourinhã Formation of the Lusitanian Basin, western Portugal (Praia Do Valmitão, Ribamar). Analysis indicates that the meander belt here comprised mixed‐load fluvial channels traversing a vegetated floodplain subject to a seasonal winter wet/summer dry palaeoclimate. This setting facilitated the development of both calcic palaeosols and shallow lakes on the adjacent floodplain. Critically, there is no evidence of the effects of tidal modulation on bedding structures, thereby establishing purely fluvial conditions. Heterolithic point‐bar deposits generated in this setting are bioturbated extensively by a trace fossil assemblage dominated by the meniscate trace Taenidium barretti , with Skolithos linearis , Planolites beverleyensis and Cylindricum isp. also recognized. A number of factors suggest that the Taenidium barretti producer in this case was a subaquatic organism living in an active fluvial channel setting (i.e. not colonizing subaerially exposed channel‐margin/floodplain deposits). Accordingly, there are some implications for current ichnofabric/ichnofacies models in the continental realm. Firstly, Taenidium ‐dominated ichnofabrics need not necessarily be confined to colonization beneath subaerially exposed surfaces; they might also be produced within submerged substrates. Secondly, there is scope to extend the range of the Scoyenia ichnofacies to include active fluvial channels and not simply those channels that were inactive or abandoned.     

Architecture and morphodynamics of a 1·6 Ga fluvial sandstone: Ellice Formation of Elu Basin,Arctic Canada

Precambrian fluvial deposits have been traditionally described as architecturally simple, forming shallow and wide braidplains with sheet‐like geometry. The varied architecture and morphodynamics of the 1·6 Ga Ellice Formation of Elu Basin, Nunavut, Canada, are examined from detailed studies of section and planform exposures along coastal platforms and stepped cliffs. The Ellice Formation overlies older Proterozoic sandstones and Archean crystalline rocks, recording sedimentation in fluvial, aeolian, coastal and nearshore‐marine environments. The fluvial deposits display palaeoflow towards the west/north‐west, while overlying shallow‐marine deposits record transgression towards the east/south‐east. The Ellice Formation displays dispersed palaeoflow at its base, and also at higher stratigraphic levels, where fluvial and aeolian deposits are associated. Elsewhere, mainly unimodal palaeoflow points to extensive low‐sinuosity fluvial deposition. Within the terrestrial deposits, fluvial, fluvial–aeolian and coastal architectural elements are recognized. Fluvial elements comprise cross‐bedded sandstone and minor conglomerate, exhibiting an overall fining‐upward trend with associated decrease in preservation, dimension and amalgamation of channel bodies. These motifs are interpreted to portray a shift in depositional environment from proximal trunk rivers to distal alluvial plains. Low‐sinuosity fluvial elements are the most common, and include major channel bodies, elongate side bars and mid‐channel bars with well‐developed scroll topography. High‐sinuosity channel‐bar complexes exhibit upbar‐flow rotation and yield evidence of bar expansion coupled with rotation and translation. Fluvial–aeolian elements are composed of aeolian dunes juxtaposed with isolated channel bodies and bank‐attached bars. Minor mixed fluvial–aeolian sheets record local deposition in unconfined settings (possibly floodbasins) or inter‐distributary highlands. Finally, coastal elements comprise small deltaic complexes composed of sand‐rich distributary‐channel bodies feeding heterolithic mouth bars. Overall, the sedimentary record of the Ellice Formation demonstrates an example from the Precambrian where alluvium was locally characterized by a higher geomorphic variability than previously recognized.     

Counter point bar deposits: lithofacies and reservoir significance in the meandering modern Peace River and ancient McMurray Formation, Alberta, Canada

Counter point bar deposits in the meandering Peace River, North‐central Alberta, Wood Buffalo National Park, are distinct from point bar deposits in terms of morphology, lithofacies and reservoir potential for fluids. Previously referred to as the distal‐most parts of point bars, point bar tails and concave bank‐bench deposits, counter point bar deposits have concave morphological scroll patterns rather than convex as with point bars. The Peace is a large river (bankfull discharge 11 700 m³ sec^?1, width 375 to 700 m, depth 15 m, gradient 0·00004 or 4 cm km^?1) in which counter point bar deposits are dominated by silt (80% to 90%), which contrasts with sand‐dominant (90% to 100%) point bar deposits. Beginning at the meander inflection (transition from convex to concave), counter point bar deposit stratigraphy thickens as a wedge‐like architecture in the distal direction until the deposit is nearly as thick as the point bar deposits. The low permeability silt‐dominant lithofacies in counter point bar deposits will limit reservoir extent and movement of fluids in both modern and ancient subsurface fluvial deposits. In the exploration and extraction of bitumen and heavy oil in subsurface fluvial rocks, identification and mapping of reservoir potential of point bar deposits and counter point bar deposits is now possible in the fluvial‐dominated tidal estuarine Lower Cretaceous Middle McMurray Formation, North‐east Alberta. Recent geophysical advances have facilitated imaging of some ancient buried point bar deposits and counter point bar deposits which, on the basis of morphological shape of sedimentary bodies observed from seismic amplitude, can be interpreted and mapped as depositional elements or blocks that contain associated sandstone or siltstone dominant lithofacies, respectively. As counter point bar deposits exhibit poor permeability and thus limit reservoir potential for water, natural gas, light crude, heavy oil and bitumen, counter point bar deposits should be avoided in resource developments. Geophysical imaging, interpretation and mapping of point bar deposit and counter point bar deposit elements provide new opportunities to improve recovery of bitumen and heavy oil and reduce development costs in subsurface cyclic steam stimulation and steam‐assisted gravity drainage projects by not drilling into counter point bar deposits.     

Shaler: in situ analysis of a fluvial sedimentary deposit on Mars

This paper characterizes the detailed sedimentology of a fluvial sandbody on Mars for the first time and interprets its depositional processes and palaeoenvironmental setting. Despite numerous orbital observations of fluvial landforms on the surface of Mars, ground‐based characterization of the sedimentology of such fluvial deposits has not previously been possible. Results from the NASA Mars Science Laboratory Curiosity rover provide an opportunity to reconstruct at fine scale the sedimentary architecture and palaeomorphology of a fluvial environment on Mars. This work describes the grain size, texture and sedimentary facies of the Shaler outcrop, reconstructs the bedding architecture, and analyses cross‐stratification to determine palaeocurrents. On the basis of bedset geometry and inclination, grain‐size distribution and bedform migration direction, this study concludes that the Shaler outcrop probably records the accretion of a fluvial barform. The majority of the outcrop consists of large‐scale trough cross‐bedding of coarse sand and granules. Palaeocurrent analyses and bedform reconstruction indicate that the beds were deposited by bedforms that migrated towards the north‐east, across the surface of a bar that migrated south‐east. Stacked cosets of dune cross‐bedding suggest aggradation of multiple bedforms, which provides evidence for short periods of sustained flow during Shaler deposition. However, local evidence for aeolian reworking and the presence of potential desiccation cracks within the outcrop suggest that fluvial deposition may have been intermittent. The uppermost strata at Shaler are distinct in terms of texture and chemistry and are inferred to record deposition from a different sediment dispersal system with a contrasting provenance. The outcrop as a whole is a testament to the availability of liquid water on the surface of Mars in its early history.     

Sedimentology and morphology of a low-sinuosity river: Calamus River, Nebraska Sand Hills

A study reach of the Calamus River, Nebraska Sand Hills, has a low sinuosity (less than 1.3) and braiding parameter (less than 1). Depending on sinuosity, the channel is occupied by alternate bars and point bars, the emergent parts of which form nuclei for midstream bars (islands). Channel migration occurs by bend expansion and translation, downstream and lateral growth of islands, and by chute cutoff. Channel-bed sediment is mainly medium-grained sand, but gravel and coarser sand sizes occur in thalweg areas adjacent to cutbanks and upstream parts of bars and islands, and finer sands occur on the downstream parts of bars and filling channels. Curved-crested dunes cover most of the channel bed at most flow stages, with ripples restricted to shallow areas near banks. Bed material is mostly large-scale cross-stratified, with small-scale cross-strata interbedded with plant debris occurring in topographically high areas near banks. Vibracores through channel bars show a basal erosion surface overlain by large-scale cross-stratified sands, in turn overlain by small-scale cross-stratified sand interbedded with plant debris. The overall sequence generally fines upwards, but the large-scale cross-stratified portion either fines upwards, coarsens upwards, or shows little grain size variation. Lithofacies distributions vary spatially within and between bars depending on position in the bar and local channel curvature/width, in a similar way to unbraided rivers elsewhere. Lithofacies of bar deposits are similar to those in the active channel, and the elevations of the basal erosion surface and adjacent channel thalweg correspond closely. Channels abandoned by chute cutoff are filled progressively from the upstream end, and comprise deposits similar to the downstream parts of bars (i.e. fining upwards). The downstream extremities of channel fills may contain large proportions of peat relative to sand, but little mud due to the paucity of such fine suspended load in the Calamus.     

A meander-belt sandstone of the Lower Cretaceous of Southern England

The meander-belt deposit comprises a sandstone resting on an erosion surface and bounded above and below by massive varicoloured mudstones with rootlet traces. The sandstone unit is composed of six bodies separated from one another, horizontally, by erosion surfaces; together the bodies form a single multilateral sand body. Internally each body is composed of lateral accretion units inclined at up to 6° from the horizontal. Vertical sequences of facies show significant variations but the grain size generally fines upwards. The principal lithofacies within the sandstones are, in common ascending order, intraformational conglomerate, large-scale cross-bedded, horizontal bedded and small-scale cross-laminated sandstone, and alternate sandstones and mudstones. Current directions are normal to the true slope of accretion surfaces and show insignificant scatter within individual bodies but are very diverse overall. Five of the sand bodies are believed to represent individual point bars, and one body an abandoned channel. Together they comprise the meander belt. The river was subject to very variable discharges and carried high suspended loads. Analysis of vertical profiles indicates that grain size segregation along the length of the point bars caused differentiation of the bars into coarse-grained heads and sandy tails.     

Morphodynamic evolution and stratal architecture of translating tidal point bars: Inferences from the northern Venice Lagoon (Italy)

The widespread distribution of tidal creeks and channels that undertake meandering behaviour in modern coasts contrasts with their limited documentation in the fossil record, where point‐bar elements arising from the interaction between a mix of both fluvial and tidal currents are mainly documented. The sedimentary products of tidal channel‐bend evolution are relatively poorly known, and few studies have focused previously on specific facies models for tidal point bars present in modern settings. This study improves understanding of tidal channel meander bends through a multi‐disciplinary approach that combines analyses of historical aerial photographs, measurements of in‐channel flow velocity, high‐resolution facies analyses of sedimentary cores and three‐dimensional architectural modelling. The studied channel bend (12 to 15 m wide and 2 to 3 m deep) drains a salt marsh area located in the north‐eastern sector of the microtidal Venice Lagoon, Italy. Historical photographs show that, during the past 77 years, the bend has translated seaward ca 15 m. Results show that the channel bend formed on a non‐vegetated mud flat that was progressively colonized by vegetation. Seaward translation occurred under aggradational conditions, with an overall migration rate of 0·2 to 0·3 m year⁻¹, and was promoted by the occurrence of cohesive, poorly erodible outer bank deposits. Ebb currents are dominant, and translation of the channel bend promotes erosion and deposition along the landward and seaward side of the bar, respectively. Tidal currents show a clear asymmetry in terms of velocity distribution, and their offset pattern provides a peculiar grain‐size distribution within the bar. During the flood stage, sand sedimentation occurs in the upper part of the bar, where the maximum flow velocity occurs. During the ebb stage, the bar experiences the secondary helical flow that accumulates sand at the toe of the bar. Lateral stacking of flood and ebb deposits has caused the formation of localized coarsening‐upward and fining‐upward sedimentary packages, respectively.     

Point bar and floodplain formation of the meandering Beatton River, northeastern British Columbia, Canada

This study examines the morphology, sedimentology and genesis of the point bars and floodplain of the Beatton River. The formation of point bars occurs in distinct stages. An initial point bar platform composed mainly of coarse sediment is formed adjacent to the convex bank of a migrating meander bend, and is the base on which develops a single scroll bar of fine traction and suspended load. With continued sedimentation, the scroll bar grows, eventually supporting vegetation and becoming a floodplain ridge. Scroll bars form with greatest size and frequency in rapidly migrating bends, and the shape of the meander bend appears to determine both the location of the initial bar deposit, and its direction of growth up or downstream. Approximately one-half of the floodplain sediment is derived from suspended load, and the initiation of a scroll bar appears to be due to excessive deposition of suspended load in a zone of flow separation over a point bar platform. The critical flow condition for the initiation of a scroll bar does not occur with the same recurrence interval on different shaped meander bends, however, the average recurrence interval within the study reach is approximately every 30 years. Sedimentation rates on point bars and on the floodplain indicate two relatively distinct stages of floodplain alluviation. The most rapid is for surfaces less than 50 years old, although sediment accumulation still persists on surfaces up to 250 years in age. Although frequently flooded, surfaces older than this accumulate very little sediment. Despite 2–3 m of overbank deposition, the amplitude of floodplain ridges is maintained by secondary currents which sweep sediment from the swales towards the ridge crests.     

Formation of point bars through rising and falling flood stages: Evidence from bar morphology,sediment transport and bed shear stress

Flow processes and sediment transport in a channel bend and associated point bar have been studied in modern rivers, theoretical models and physical experiments: however, the relationship between flow process and point‐bar morphology has rarely been explained due to the complex nature of open channel flow. Plan‐view exposures of an ancient point‐bar complex, exposed at the top of the Cretaceous Ferron Sandstone Member of the Mancos Shale Formation, south‐central Utah, allowed reconstruction of bar morphology, sediment transport and bed shear stress, which were used to extrapolate flow processes. Studies of these outcrops show that compound point bars and scroll bars were probably formed during falling and rising flood stages, respectively. A simulation model of plan‐view channel form shows that channel dimensions, such as radius of curvature and sinuosity of the point‐bar complex, range between 205 m and 351 m and 1·04 and 1·22, respectively, throughout the evolution of the channel bend. Variations in strength of the helical flow were interpreted as the main control on facies architecture and bar morphology. Strong helical flow was related to the deposition of the scroll bars, while strength of helical flow is decreased for compound bars. The use of cross‐beds as a common palaeocurrent indicator was found to be inconsistent with mean flow directions and channel margin orientation.